Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yuan, X.*; Hu, Q. H.*; Fang, X.*; Wang, Q. M.*; Ma, Y.*; Tachi, Yukio
Sedimentary Geology, 465, p.106633_1 - 106633_14, 2024/05
Yamaguchi, Masaaki; Suzuki, Yuji*; Kabasawa, Satsuki; Kato, Tomoko
JAEA-Data/Code 2024-001, 21 Pages, 2024/03
JAEA-Data-Code-2024-001.pdf:3.45MB
JAEA-Data-Code-2024-001-appendix(CD-ROM).zip:8.0MB
Model catchments have developed for use in testing various assessment models that can consider specific surface environmental conditions such as topography, riverine systems, and land use in the biosphere assessment of HLW geological disposal. The model catchments consist of the topography and riverine system of the catchment area created using existing tools, as well as land use and population distribution, river discharge, sediment flux data set by algorithms from topographical data. Datasets of three types of model watersheds (Types 1 to 3, watershed area: 730 to 770 km
) with different topographical characteristics have released as raster data that can be handled by geographic information systems (GIS). Since the model catchments were created virtually reflecting as much as possible the main characteristics of Japan's surface environment, they can be used as a test bed for conducting hydraulic/mass transport analysis to set the GBI and compartment model.
Saito, Yuki*; Ishiwata, Tobimaru*; Horiuchi, Misato*; Nishiki, Yuto*; Kikuchi, Ryosuke*; Otake, Tsubasa*; Kawakita, Ryohei; Takayama, Yusuke; Mitsui, Seiichiro; Sato, Tsutomu*
2024 Nendo Shigen, Sozai Gakkai Shunki Taikai Koenshu, 7 Pages, 2024/03
no abstracts in English
Hanamachi, Yuji*; Walker, C.*; Sasamoto, Hiroshi; Mihara, Morihiro
NIMS Bisai Kozo Kaiseki Purattofuomu Riyo Hokokusho (Internet), 2 Pages, 2023/12
A High-volume Fly ash Silica fume Cement (HFSC) has been considered as the use of concrete support of drift in deep disposal of radioactive wastes. JAEA has been carried out experiments and modeling studies to evaluate chemical stability of C-A-S-H gel synthesized which would be believed as the dominant component of the HFSC. For the modeling purpose, it is necessary to evaluate the chemical composition both of C-A-S-H gel synthesized and accompanied minerals in the experiment. In the year of 2020, 
Al and 
Si NMR measurement were performed to identify Al and Si distribution in the sample and chemical composition of C-A-S-H gel was derived. However, it was impossible to derive the C-A-S-H gel composition having the expected Al/Si molar ratio since there were several accompanied minerals produced in the experiment due to the short term of immersion. This time similar approach to derive C-A-S-H gel composition is adopted using NMR measurement for the sample of longer time (6 months).
Soler, J. M.*; Kek
linen, P.*; Pulkkanen, V.-M.*; Moreno, L.*; Iraola, A.*; Trinchero, P.*; Hokr, M.*; 
ha, J.*; Havlov
, V.*; Trpko
ov, D.*; et al.
Nuclear Technology, 209(11), p.1765 - 1784, 2023/11
Times Cited Count：2 Percentile：72.91(Nuclear Science & Technology)Tachi, Yukio
Kagaku To Kyoiku, 71(10), p.420 - 423, 2023/10
no abstracts in English
Sato, Hisashi*; Takayama, Yusuke; Suzuki, Hideaki*; Sato, Daisuke*
JAEA-Data/Code 2023-010, 47 Pages, 2023/09
JAEA-Data-Code-2023-010.pdf:1.45MB
When a high-level radioactive waste repository is constructed in a coastal area, it is necessary to fully evaluate the impact of seawater-based groundwater on engineered barriers, including buffer materials. In this report, one-dimensional saltwater infiltration tests were conducted to obtain data to understand the impact of seawater-based groundwater on the migration phenomena of water and solutes in the buffer material during the transient period. As a result, it was confirmed that the infiltration rate increased as the NaCl concentration in the infiltration solution increased. And it was confirmed that the water content ratio distribution changed as the NaCl concentration in the infiltration solution increased. As a result of analysis of the chloride ion concentration of the post-test specimens confirmed that chloride ion enrichment was occurred with infiltration. As a result of verifying the mechanism by which chloride ion enrichment occurs, it was confirmed that the phenomenon of chloride ion enrichment due to infiltration depends on the initial water content ratio.
Takayama, Yusuke; Yamamoto, Yoichi*; Goto, Takahiro*
Jiban Kogaku Janaru (Internet), 18(3), p.317 - 330, 2023/09
It has been reported that the deformation greatly increased in the secondary consolidation process in the past long-term consolidation test of 1.8 years on Na-type bentonite/sand mixed soil. Therefore, we analyzed potential contributing factors in this behavior. A long-term consolidation test for about 10 years on bentonite and kaolinite was started using the test equipment with countermeasures against these factors. In this paper, the secondary consolidation behavior of bentonite was investigated based on the long-term consolidation test data for 2.7, 3.7 and 4 years. The results were generally consistent with the conventional findings on soil mechanics that the deformation due to secondary consolidation progresses linearly with respect to logarithm of time. This test will be continued for about 10 years and longer-term secondary consolidation behavior will be investigated.
Arthur, R.*; Sasamoto, Hiroshi; Alt-Epping, P.*; Tachi, Yukio
Applied Geochemistry, 155, p.105707_1 - 105707_8, 2023/08
Times Cited Count：1 Percentile：62.05(Geochemistry & Geophysics)The experience gained in modeling the evolution, from past to present, of natural tracer profiles in geologic media can help support safety assessment of disposal concepts for radioactive wastes in deep geologic repository. Solute-transport models were developed in the present study using a forward modeling approach constrained by boundary conditions inferred from the paleo-hydrogeological evolution of the Horonobe area in Hokkaido, Japan. Apparent differences in transport behavior at the two boreholes location considered in this study, which were situated only about 1 km apart, appear to have resulted from relatively small differences in accessible porosity and hydraulic conductivity, which in turn may have been controlled by local differences in fracture density and fracture connectivity.
(cr) at 318 K in the presence of ironYoshida, Yasushi*; Kitamura, Akira; Shibutani, Sanae*
Journal of Nuclear Science and Technology, 60(8), p.900 - 910, 2023/08
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)
sp
HRLSawada, Atsushi; Sakamoto, Kazuhiko*; Watahiki, Takanori*; Imai, Hisashi*
SKB P-17-06, 154 Pages, 2023/08
Minari, Eriko*; Kabasawa, Satsuki; Mihara, Morihiro; Makino, Hitoshi; Asano, Hidekazu*; Nakase, Masahiko*; Takeshita, Kenji*
Journal of Nuclear Science and Technology, 60(7), p.793 - 803, 2023/07
Times Cited Count：2 Percentile：53.91(Nuclear Science & Technology)Ishidera, Takamitsu; Okazaki, Mitsuhiro*; Yamada, Yoshihide*; Tomura, Tsutomu*; Shibutani, Sanae*
Journal of Nuclear Science and Technology, 60(5), p.536 - 546, 2023/05
The distribution coefficient (
) value of radionuclides is an important parameter in the radionuclide migration analysis in the safety assessment of the geological disposal of high-level radioactive waste. The values must be extensively evaluated especially under conditions where they might be decreased to improve the reliability of safety assessment. In this study, the pH dependence of the values for Sn and Nb on montmorillonite was evaluated using batch sorption experiments at neutral to alkaline pH, which might be caused by the leaching of cementitious materials and the corrosion of carbon steel. The values were determined in the range 8 
pH 12 by the experiments and were found to decrease with increasing pH. A model calculation using a thermodynamic sorption model was conducted on the measured pH dependence of the values. Two different sorption sites were required to describe the pH dependence of the values of Sn in the model calculation, whereas one sorption site was considered predominant in the sorption of Nb.
Terashima, Motoki; Endo, Takashi*; Kimuro, Shingo; Beppu, Hikari*; Nemoto, Kazuaki*; Amano, Yuki
Journal of Nuclear Science and Technology, 60(4), p.374 - 384, 2023/04
Times Cited Count：2 Percentile：53.91(Nuclear Science & Technology)Yuan, X.*; Hu, Q.*; Lin, X.*; Zhao, C.*; Wang, Q.*; Tachi, Yukio; Fukatsu, Yuta; Hamamoto, Shoichiro*; Siitari-Kauppi, M.*; Li, X.*
Journal of Hydrology, 618, p.129172_1 - 129172_15, 2023/03
Times Cited Count：0 Percentile：0(Engineering, Civil)Onutai, S.; Sato, Junya; Osugi, Takeshi
Journal of Solid State Chemistry, 319, p.123808_1 - 123808_10, 2023/03
Times Cited Count：3 Percentile：87.52(Chemistry, Inorganic & Nuclear)Mitsui, Seiichiro
Kinzoku, 93(3), p.211 - 218, 2023/03
As part of research and development of geological disposal, "natural analogues" have been applied to validate concept of models and evaluation methodologies for performance assessment. By introducing our research results on natural analogues, this paper presents how we have utilized knowledge of excavated archaeological artifacts for geological disposal studies.
Yanagida, Akinobu*; Ura, Yoko*; Mitsui, Seiichiro; Ishidera, Takamitsu; Kawakita, Ryohei
Nara Bunkazai Kenkyujo Soritsu 70-Shunen Kinen Rombunshu; Bunkazai Ronso 5, p.843 - 856, 2023/03
To investigate chloride salt accumulation inside an iron artifact in soil, non-destructive analysis of three iron artifacts excavated from the Heijo Palace Site was conducted using elemental mapping by X-ray fluorescence analysis, micro-X-ray diffraction analysis, and X-ray computed tomography. Furthermore, the buried environments of the artifacts were presumed based on the previous reports of the environmental investigation at the Heijo Palace site. The results revealed the iron artifact's corrosion behavior was different individually- (1) the iron artifact that was presumed buried under oxidation environments had a goethite/magnetite corrosion layer and contained akageneite inside the corrosion layer. (2) the metal of the other iron artifacts buried under the oxidation environment had eluted absolutely and the artifacts had a rust layer formed by only goethite. (3) the other artifact buried in reduction environments had a rust layer composed of siderite. Accumulation of chloride salts inside an iron artifact was observed only in (1). Because each Cl
concentration measured in underground water observation holes at the Heijo Palace Site showed almost the same level concentrations, it was presumed that the accumulation of chloride salts depended on the environmental factor except for Cl concentration. Based on these results, there was a possibility that the occurrence of local corrosion attributed to the separation of anodic and cathodic regions through the formation of the goethite/magnetite rust layer caused chloride salts accumulation inside an iron artifact.
Cs NMR chemical shift of clay minerals via machine learning and DFT-GIPAW calculationsOkubo, Takahiro*; Takei, Akihiro*; Tachi, Yukio; Fukatsu, Yuta; Deguchi, Kenzo*; Oki, Shinobu*; Shimizu, Tadashi*
Journal of Physical Chemistry A, 127(4), p.973 - 986, 2023/02
Times Cited Count：1 Percentile：56.86(Chemistry, Physical)The identification of adsorption sites of Cs on clay minerals has been studied in the fields of environmental chemistry. The nuclear magnetic resonance (NMR) experiments allow direct observations of the local structures of adsorbed Cs. The NMR parameters of Cs, derived from solid-state NMR experiments, are sensitive to the local neighboring structures of adsorbed Cs. However, determining the Cs positions from NMR data alone is difficult. This paper describes an approach for identifying the expected atomic positions of Cs adsorbed on clay minerals by combining machine learning (ML) with experimentally observed chemical shifts. A linear ridge regression model for ML is constructed from the smooth overlap of atomic positions descriptor and gauge-including projector augmented wave (GIPAW) ab initio data. The Cs chemical shifts can be instantaneously calculated from the Cs positions on any clay layers using ML. The inverse analysis from the ML model can derive the atomic positions from experimentally observed chemical shifts.
Onutai, S.; Osugi, Takeshi; Sone, Tomoyuki
Materials, 16(3), p.985_1 - 985_14, 2023/02
Times Cited Count：4 Percentile：90.35(Chemistry, Physical)