Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 170

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

JAEA Reports

Utilization of gamma ray irradiation at the WASTEF Facility

Sano, Naruto; Yamashita, Naoki; Watanabe, Masaya; Tsukada, Manabu*; Hoshino, Kazutoyo*; Hirai, Koki; Ikegami, Yuta*; Tashiro, Shinsuke; Yoshida, Ryoichiro; Hatakeyama, Yuichi; et al.

JAEA-Technology 2023-029, 36 Pages, 2024/03

JAEA-Technology-2023-029.pdf:2.47MB

At the Waste Safety Testing Facility (WASTEF), the gamma ray irradiation device "Gamma Cell 220" was relocated from the 4th research building of the Nuclear Science Research Institute in FY2019, and the use of gamma ray irradiation has begun. Initially, Fuel Cycle Safety Research Group, Fuel Cycle Safety Research Division, Nuclear Safety Research Center, Sector of Nuclear Safety Research and Emergency Preparedness, the owner of this device, conducted the tests as the main user, but since 2022, other users, including those outside the organization, have started using it. The gamma ray irradiation device "Gamma Cell 220" is manufactured by Nordion International Inc. in Canada. Since it was purchased in 1989, the built-in 60Co radiation source has been updated once, and safety research related to nuclear fuel cycles, etc. It is still used for this purpose to this day. This report summarizes the equipment overview of the gamma ray irradiation device "Gamma Cell 220", its permits and licenses at WASTEF, usage status, maintenance and inspection, and future prospects.

JAEA Reports

Development of an electrochemical measurement method for carbon steels in radiation source dissolved solution and a corroded specimen analysis method using an imaging plate

Yamashita, Naoki; Aoyama, Takahito; Kato, Chiaki; Sano, Naruto; Tagami, Susumu

JAEA-Technology 2023-028, 22 Pages, 2024/03

JAEA-Technology-2023-028.pdf:1.9MB

At the Fukushima Daiichi Nuclear Power Station (1F), which is currently undergoing decommissioning, there is growing interest in the effects of radiation-emitting radionuclides such as $$^{90}$$Sr and $$^{137}$$Cs on the structural integrity. In particular, the corrosion behavior of carbon steel, which is used in many parts of 1F, is known to change depending on metal cations in solution, but the effects of $$^{90}$$Sr and $$^{137}$$Cs on corrosion are not yet understood. In addition, it is important to investigate the distribution of $$^{90}$$Sr and $$^{137}$$Cs in the rust layer in order to understand the corrosion behavior, but the method has not yet been established. In this study, a glove box was prepared to conduct corrosion tests of carbon steel in NaCl containing $$^{90}$$Sr and $$^{137}$$Cs in the glove box. In addition, in order to clarify the influence of $$^{90}$$Sr and $$^{137}$$Cs, which exist as metal cations in the solution, on the corrosion behavior of carbon steel, we attempted to establish a detection method for radioactive materials in the rust layer using an imaging plate.

JAEA Reports

Annual report of Nuclear Science Research Institute, JFY2021

Nuclear Science Research Institute, Sector of Nuclear Science Research

JAEA-Review 2023-050, 178 Pages, 2024/03

JAEA-Review-2023-050.pdf:7.06MB

Nuclear Science Research Institute (NSRI) is composed of Planning and Management Department and six departments, namely Department of Operational Safety Administration, Department of Radiation Protection, Engineering Services Department, Department of Research Reactor and Tandem Accelerator, Department of Criticality and Hot Examination Technology and Department of Decommissioning and Waste Management, and each department manages facilities and develops related technologies to achieve the "Medium- to Long- term Plan" successfully and effectively. And, four research centers which are Advanced Science Research Center, Nuclear Science and Engineering Center, Nuclear Engineering Research Collaboration Center and Materials Sciences Research Center, belong to NSRI. In order to contribute the future research and development and to promote management business, this annual report summarizes information on the activities of NSRI of JFY 2021 as well as the activity on research and development carried out by Collaborative Laboratories for Advanced Decommissioning Science, Nuclear Safety Research Center and activities of Nuclear Human Resource Development Center, using facilities of NSRI.

JAEA Reports

Annual report of Nuclear Science Research Institute, JFY2020

Nuclear Science Research Institute, Sector of Nuclear Science Research

JAEA-Review 2023-009, 165 Pages, 2023/06

JAEA-Review-2023-009.pdf:5.76MB

Nuclear Science Research Institute (NSRI) is composed of Planning and Management Department and six departments, namely Department of Operational Safety Administration, Department of Radiation Protection, Engineering Services Department, Department of Research Reactor and Tandem Accelerator, Department of Criticality and Hot Examination Technology and Department of Decommissioning and Waste Management, and each department manages facilities and develops related technologies to achieve the "Medium- to Long-term Plan" successfully and effectively. And, four research centers which are Advanced Science Research Center, Nuclear Science and Engineering Center, Nuclear Engineering Research Collaboration Center and Materials Sciences Research Center, belong to NSRI. In order to contribute the future research and development and to promote management business, this annual report summarizes information on the activities of NSRI of JFY 2020 as well as the activity on research and development carried out by Collaborative Laboratories for Advanced Decommissioning Science, Nuclear Safety Research Center and activities of Nuclear Human Resource Development Center, using facilities of NSRI.

Journal Articles

Current status of accident tolerant fuel (ATF) development, 1; Overview of ATF development conducted under the technology development project for improving nuclear safety

Yamashita, Shinichiro

Nihon Genshiryoku Gakkai-Shi ATOMO$$Sigma$$, 65(4), p.233 - 237, 2023/04

In the wake of the accident at the Fukushima Daiichi Nuclear Power Plant (NPP) of TEPCO due to the Great East Japan Earthquake in 2011, interest in the early implementation of accident tolerant fuel (ATF) not only for many existing NPPs but also for future NPPs, which is expected to dramatically improve the safety of light water reactors, has increased globally, and research and development is currently underway in many countries around the world. In this article, an overview of domestic ATF technology development that has been carried out with the support of the Ministry of Economy, Trade and Industry since 2015, will be introduced.

JAEA Reports

Development of a test method for electrochemical measurements of stainless steel in nitric acid solution containing neptunium-237 under gamma-ray irradiation

Yamashita, Naoki; Irisawa, Eriko; Kato, Chiaki; Sano, Naruto; Tagami, Susumu

JAEA-Technology 2022-035, 29 Pages, 2023/03

JAEA-Technology-2022-035.pdf:2.54MB

In the treatment process of the current commercial reprocessing plant (Rokkasho Reprocessing Plant), the high-level liquid waste concentrator is the equipment that treats the most corrosive solution. In the high-level liquid waste concentrator, the extracted liquid waste after separation of uranium and plutonium is heated, concentrated, and reduced in volume. Therefore, the amount of gamma- rays emitted from fission products and the concentration of corrosive metal ion species such as neptunium-237 ($$^{237}$$Np) are the highest in the reprocessing process, and the amount of corrosion in the high-level liquid waste concentrate canner is expected to be large. In this study, in order to clarify the effect of gamma-rays on the corrosion reaction of stainless steel in nitric acid solutions containing $$^{237}$$Np from the electrochemical viewpoint, the corrosion test apparatus for heat transfer surfaces in an airtight concrete cell at the Waste Safety TEsting Facility (WASTEF) of Nuclear Science Research Institute was modified to enable electrochemical measurements under gamma-ray irradiation. The effect of gamma-rays on the corrosion reaction taking place on the stainless steel surface was discussed from the electrochemical test results obtained. As a result, changes in the immersion potentials of stainless steel and the polarization curves due to chemical species caused by radiolysis of gamma-ray irradiation were confirmed.

JAEA Reports

R&D and maintenance management of the WASTEF Facility (FY2021)

Sano, Naruto; Yamashita, Naoki; Hoshino, Kazutoyo*; Tsukada, Manabu*; Sawauchi, Fumiya*; Otake, Yoshinori; Ichise, Kenichi; Tagami, Susumu

JAEA-Technology 2022-034, 47 Pages, 2023/03

JAEA-Technology-2022-034.pdf:2.81MB

The Waste Safety Testing Facility (WASTEF) was established in 1982 as an experimental facility for long-term storage of solidified high-level radioactive waste generated in the reprocessing of spent light water reactor fuel and the subsequent safety assessment of geological disposal. It is a historic facility that started operation in 1982. This facility consists of 5 concrete cells, 1 lead cell, 6 glove boxes, and 7 hoods, and is a large-scale facility that can use nuclear fuel materials including uranium and plutonium and radioactive isotopes including TRU. In this facility, research and development requested by the research department is carried out in the Hot Material Examination Section. In addition, patrol inspections, self-inspections, etc. are also carried out as maintenance management based on safety regulations. This report summarizes the overview of WASTEF facilities, the results of operation, maintenance and management work in FY2021, and the future outlook.

Journal Articles

Mechanical properties of pure tungsten and tantalum irradiated by protons and neutrons at the Swiss spallation-neutron source

Saito, Shigeru; Suzuki, Kazuhiro; Obata, Hiroki; Dai, Y.*

Nuclear Materials and Energy (Internet), 34, p.101338_1 - 101338_9, 2023/03

 Times Cited Count:1 Percentile:33.72(Nuclear Science & Technology)

In this study, a post-irradiation examination of pure tungsten (W) and tantalum (Ta) specimens irradiated at the Swiss Spallation-Neutron Source is conducted. W is used as a potential candidate for a solid spallation-target material owing to its favorable properties. However, W also suffers from several disadvantages such as poor corrosion resistance to water coolant and irradiation embrittlement. To improve these properties, cladding technologies using Ta for W alloys have been developed. In the present study, we investigated the irradiation effects on two tungsten materials, poly-crystal W (W-Poly) and single-crystal W (W-Sin), along with pure polycrystalline Ta. The tensile-test results revealed that W-Poly exhibited almost no ductility after irradiation of 10.2-35.0 dpa. W-Sin was irradiated up to 10.2 dpa and demonstrated 6% of total elongation (TE). With regard to Ta, TE decreased based on the increase in irradiation, reaching almost zero at doses of more than 10.3 dpa.

Journal Articles

Effect of $$^{90}$$Sr dissolved solution on corrosion potential of type 316L stainless steel

Aoyama, Takahito; Kato, Chiaki; Sato, Tomonori; Sano, Naruto; Yamashita, Naoki; Ueno, Fumiyoshi

Zairyo To Kankyo, 71(4), p.110 - 115, 2022/04

no abstracts in English

Journal Articles

Polarization characteristics and evaluation of corrosion rate of stainless steel in nitric acid solution containing $$^{237}$$Np

Irisawa, Eriko; Kato, Chiaki; Yamashita, Naoki; Sano, Naruto

Zairyo To Kankyo, 71(3), p.70 - 74, 2022/03

In order to evaluate the corrosion of stainless steels used in spent nuclear fuel reprocessing facilities, the immersion corrosion tests and polarization measurements were performed using R-SUS304ULC stainless steel in nitric acid solution containing a kind of radionuclides, $$^{237}$$Np. At temperatures above 328 K, the corrosion potential was higher than that in nitric acid solution and was near the transpassive region. From the comparison between the corrosion amount calculated by the immersion corrosion tests and the polarization resistance, the values of $$k$$=0.018-0.025 V were obtained as a conversion factor, and the possibility of calculating the corrosion amount from the electrochemical measurement was examined.

Journal Articles

Fracture toughness in postulated crack area of PTS evaluation in highly-neutron irradiated RPV steel

Ha, Yoosung; Shimodaira, Masaki; Takamizawa, Hisashi; Tobita, Toru; Katsuyama, Jinya; Nishiyama, Yutaka

Proceedings of ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (Internet), 6 Pages, 2021/07

Journal Articles

Thermodynamic and thermophysical properties of the actinide nitrides

Uno, Masayoshi*; Nishi, Tsuyoshi*; Takano, Masahide

Comprehensive Nuclear Materials, 2nd Edition, Vol.7, p.202 - 231, 2020/08

On the thermodynamic and thermophysical properties of the actinide nitrides in Comprehensive Nuclear Materials published by Elsevier as the first edition in 2012, we have revised them by adding some brand-new data. The main topics added are the solid solubility of the actinide nitrides into the zirconium nitride matrix for transmutation fuel, the lattice expansion of actinide nitrides induced by self-irradiation damage, the influence of defects accumulation on thermal conductivity, and the thermal expansion in curium nitride lattice.

Journal Articles

Experimental validation of tensile properties measured with thick samples taken from MEGAPIE target

Saito, Shigeru; Suzuki, Kazuhiro; Hatakeyama, Yuichi; Suzuki, Miho; Dai, Y.*

Journal of Nuclear Materials, 534, p.152146_1 - 152146_16, 2020/06

 Times Cited Count:1 Percentile:12.47(Materials Science, Multidisciplinary)

A post-irradiation examination (PIE) was performed on the tensile specimens prepared from the MEGAPIE (MEGAwatt Pilot Experiment) target which were irradiated in flowing lead-bismuth eutectic (LBE). Thicknesses of the specimens were over two times larger than that of the standard specimen. The PIE revealed that the T91 specimens showed a 1.5-2.0 times larger total elongation (TE) compared to the literature values for a specimen with standard t/w (ratio of thickness to width). It could be suggested that the t/w and TE were strongly correlated. Then, we tried to investigate the effects of the t/w on the TE by comparing unirradiated specimens. We found that there was no t/w dependence on the strength and uniform elongation. On the other hand, the TE increases with increasing t/w. Based on the experimental data, we correlated the TE with various specimens t/w to estimate appropriate TE values, including that for the standard specimen.

Journal Articles

Modelling of intergranular corrosion using cellular automata, 1; Characteristics and corrosion rates of stainless steels in modified nuclear reprocessing solution

Yamamoto, Masahiro; Irisawa, Eriko; Igarashi, Takahiro; Komatsu, Atsushi; Kato, Chiaki; Ueno, Fumiyoshi

Proceedings of Annual Congress of the European Federation of Corrosion (EUROCORR 2019) (Internet), 5 Pages, 2019/09

Intergranular corrosion phenomena were analysed using modified reprocessing solution. The data indicated that corrosion rates increased with time at the initial stage, and these stayed at constant value. Intergranular corrosion propagated at grain boundary in the initial stage and then attacked whole grain boundary causing drop out of grains. Corrosion rates of steady state were sum of intergranular corrosion amounts and weight losses of dropped grains. Surface appearances and cross sections of corroded samples were analyzed. The results indicated that the initial stage of intergranular corrosion was characterized by the ratio of corrosion rates between grain boundary and matrix. These ratios differed from individual grain boundaries. Total corrosion rates were affected by the distribution of these ratios. These data were based on the numerical modelling of intergranular corrosion using cellular automata. And also, calculated results were compared with these analytical data.

Journal Articles

Overview of accident-tolerant fuel R&D program in Japan

Yamashita, Shinichiro; Ioka, Ikuo; Nemoto, Yoshiyuki; Kawanishi, Tomohiro; Kurata, Masaki; Kaji, Yoshiyuki; Fukahori, Tokio; Nozawa, Takashi*; Sato, Daiki*; Murakami, Nozomu*; et al.

Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.206 - 216, 2019/09

After the nuclear accident at Fukushima Daiichi Power Plant, research and development (R&D) program for establishing technical basis of accident-tolerant fuel (ATF) started from 2015 in Japan. Since then, both experimental and analytical studies necessary for designing a new light water reactor (LWR) core with ATF candidate materials are being conducted within the Japanese ATF R&D Consortium for implementing ATF to the existing LWRs, accompanying with various technological developments required. Until now, we have accumulated experimental data of the candidate materials by out-of-pile tests, developed fuel evaluation codes to apply to the ATF candidate materials, and evaluated fuel behavior simulating operational and accidental conditions by the developed codes. In this paper, the R&D progresses of the ATF candidate materials considered in Japan are reviewed based on the information available such as proceedings of international conference and academic papers, providing an overview of ATF program in Japan.

Journal Articles

Susceptibility to neutron irradiation embrittlement of heat-affected zone of reactor pressure vessel steels

Takamizawa, Hisashi; Katsuyama, Jinya; Ha, Yoosung; Tobita, Toru; Nishiyama, Yutaka; Onizawa, Kunio

Proceedings of 2019 ASME Pressure Vessels and Piping Conference (PVP 2019) (Internet), 8 Pages, 2019/07

no abstracts in English

Journal Articles

Nitride fuel cycle, 2; R&D for minor actinides transmutation

Takano, Masahide

Wagakuni Shorai Sedai No Enerugi O Ninau Kakunenryo Saikuru; Datsu Tanso Shakai No Enerugi Anzen Hosho; NSA/Commentaries, No.24, p.163 - 167, 2019/03

This article summarizes R&D status of the nitride fuel cycle for minor actinides (MA) transmutation. Status of nitride fuel fabrication, material properties and fuel performance code, pyrochemical reprocessing, and nitrogen-15 enrichment are described.

Journal Articles

Continuous liquid-liquid extraction of uranium from uranium-containing wastewater using an organic phase-refining-type emulsion flow extractor

Nagano, Tetsushi; Naganawa, Hirochika; Suzuki, Hideya; Toshimitsu, Masaaki*; Mitamura, Hisayoshi*; Yanase, Nobuyuki*; Grambow, B.

Analytical Sciences, 34(9), p.1099 - 1102, 2018/09

 Times Cited Count:12 Percentile:46.41(Chemistry, Analytical)

A previously reported emulsion flow (EF) extraction system does not include a device for refining used solvent. Therefore, the processing of large quantities of wastewater by using the EF extractor alone could lead to the accumulation of wastewater components into the solvent and diminished extraction performance. In the present study, we have developed a solvent-washing-type EF system, which is equipped with a unit for washing used solvent to prevent accumulation, and successfully applied it for treating uranium-containing wastewater.

Journal Articles

Development of metal corrosion testing method simulating equipment of reprocessing of spent nuclear fuels

Matsueda, Makoto; Irisawa, Eriko; Kato, Chiaki; Matsui, Hiroki

Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 4 Pages, 2017/00

In the PUREX method, spent fuels are dissolved with nitric acid media. The reprocessing solution containing Fission Products derived from spent fuels is very corrosive to metal materials, the corrosion problem often appears on the surface stainless steel devices. The oxidizing metal ions such as Ruthenium (Ru) and Neptunium (Np) in the process solution is the key reason for severe corrosion of stainless steel. In order to obtain the corrosion rate of stainless steel, we installed the corrosion test apparatus inside an airtight concrete cell in a hot laboratory (the WAste Safety TEsting Facility (WASTEF) of the Japan Atomic Energy Agency), and performed the corrosion tests of stainless steel in the heated nitric acid solution containing Np. The corrosion tests were performed in the temperature range from room temperature to boiling point for 500 hours per batch. The results show that the presence of Np accelerate the stainless steel corrosion in the nitric acid solution.

Journal Articles

Seawater effects on the soundness of spent fuel cladding tube

Motooka, Takafumi; Ueno, Fumiyoshi; Yamamoto, Masahiro

Proceedings of 2016 EFCOG Nuclear & Facility Safety Workshop (Internet), 6 Pages, 2016/09

At the Fukushima Daiichi nuclear accident, seawater was injected into spent fuel pools of Unit 2-4 for the emergency cooling. Seawater might cause localized corrosion of spent fuel cladding. This would lead to leakage of not only fissile materials but also fission products from fuel cladding. The behavior, however, is not understood well. In this paper, the effects of seawater on corrosion behavior and mechanical property of were studied by using a spent fuel cladding from a BWR. We immersed the spent cladding tubes in diluted artificial seawater for 300h at 353 K, and conducted their visual, cross-sectional and strength examinations. As a localized corrosion index, the pitting potentials of specimens fabricated from the cladding were measured as functions of chloride ion concentration ranging from 20 to 2500 ppm. The visual examination showed that localized corrosion has not occurred, and cross-sectional examination showed no cracks. The strength of immersed tubes was comparable to that of non-immersed tubes. Additionally, pitting potential could not be measured over 1.0 V; pitting corrosion was hardly occurred. These results suggested that the specimens from the spent fuel cladding tube was very resistant to localized corrosion.

170 (Records 1-20 displayed on this page)