Interaction of solute manganese and nickel atoms with dislocation loops in iron-based alloys irradiated with 2.8 MeV Fe ions at 400 C

Nguyen, B. V. C.*; Murakami, Kenta*; Chena, L.*; Phongsakorn, P. T.*; Chen, X.*; Hashimoto, Takashi; Hwang, T.*; Furusawa, Akinori; Suzuki, Tatsuya*

Nuclear Materials and Energy (Internet), 39, p.101639_1 - 101639_9, 2024/06

https://doi.org/10.1016/j.nme.2024.101639

Reviewing codes and standards for long term operation in Japan

Murakami, Kenta*; Arai, Taku*; Yamada, Koji*; Momma, Kensuke*; Tsuji, Takashi*; Nakagawa, Nobuyuki*; Onizawa, Kunio

Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 3 Pages, 2024/03

This paper studied the future vision of codes and standards in Japan by systematically comparing Japanese regulatory rules, standards, and industry guides related to long term operation with international safety standards, and confirmed that the Japanese standard system generally meets their recommendations. The recommendation for the future improvements of Japanese codes and standards were summarized into five items.

Verification of probabilistic fracture mechanics analysis code PASCAL for reactor pressure vessel

Lu, K.; Takamizawa, Hisashi; Li, Y.; Masaki, Koichi*; Takagoshi, Daiki*; Nagai, Masaki*; Nannichi, Takashi*; Murakami, Kenta*; Kanto, Yasuhiro*; Yashirodai, Kenji*; et al.

Mechanical Engineering Journal (Internet), 10(4), p.22-00484_1 - 22-00484_13, 2023/08

https://doi.org/10.1299/mej.22-00484

Development of a statistical evaluation method for core hot spot temperature in sodium-cooled fast reactor under natural circulation conditions

Doda, Norihiro; Igawa, Kenichi*; Iwasaki, Takashi*; Murakami, Satoshi*; Tanaka, Masaaki

Nuclear Engineering and Design, 410, p.112377_1 - 112377_15, 2023/08

https://doi.org/10.1016/j.nucengdes.2023.112377

To enhance the safety of sodium-cooled fast reactors, the decay heat in the core must be removed by natural circulation even if the AC power supply to the forced circulation equipment is lost. Under natural circulation conditions, sodium flow is driven by buoyancy, and flow velocity and temperature distribution influence each other. Thus, it is difficult to evaluate the core hot spot temperature by deterministically considering the uncertainties affecting flow and heat. In this study, a statistical evaluation method is developed for the core hot spot temperature by using Monte Carlo sampling methods. The applicability of the core hotspot evaluation method was confirmed in three representative events during natural circulation decay heat removal operations in loop-type sodium-cooled fast reactors.

Development of a design optimization framework for sodium-cooled fast reactors; Development of coupled analysis control function

Doda, Norihiro; Nakamine, Yoshiaki*; Igawa, Kenichi*; Iwasaki, Takashi*; Murakami, Satoshi*; Tanaka, Masaaki

Keisan Kogaku Koenkai Rombunshu (CD-ROM), 27, 6 Pages, 2022/06

As a part of the development of the "Advanced Reactor Knowledge- and AI-aided Design Integration Approach through the whole plant lifecycle (ARKADIA)" to automatically optimize the life cycle of innovative nuclear reactors including fast reactors, ARKADIA-design is being developed to support the optimization of fast reactor design in the conceptual stage. ARKADIA-Design consists of three systems (Virtual plant Life System (VLS), Evaluation assistance and Application System (EAS), and Knowledge Management System (KMS)). A design optimization framework controls the cooperation between the three systems through the interfaces in each system. This paper reports on the development status of the "VLS interface," which has a control function of coupling analysis codes in VLS.

Progress in conceptual design of a pool-type sodium-cooled fast reactor in Japan

Kato, Atsushi; Kubo, Shigenobu; Chikazawa, Yoshitaka; Miyagawa, Takayuki*; Uchita, Masato*; Suzuno, Tetsuji*; Endo, Junji*; Kubo, Koji*; Murakami, Hisatomo*; Uzawa, Masayuki*; et al.

Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Sustainable Clean Energy for the Future (FR22) (Internet), 11 Pages, 2022/04

The authors are carrying out conceptual design studies for a pool-type sodium-cooled fast reactor. There are main challenges such as measures against severe earthquake in Japan, thermal hydraulic in a reactor vessel (RV), a decay heat removal system design. When the JP-pool SFR of 650 MWe is installed in Japan, it shall be designed against the severe seismic conditions. Additionally, a newly three-dimensional seismic isolation system is under development.

Analysis of the radioactivity concentrations in low-level radioactive waste generated from JRR-3 and JPDR facilities

Tsuchida, Daiki; Haraga, Tomoko; Tobita, Minoru*; Omori, Hiroyuki*; Omori, Takeshi*; Murakami, Hideaki*; Mitsukai, Akina; Aono, Ryuji; Ishimori, Kenichiro; Kameo, Yutaka

JAEA-Data/Code 2020-022, 34 Pages, 2021/03

JAEA-Data-Code-2020-022.pdf:1.74MB

Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until the beginning of disposal. In order to contribute to this work, we collected and analyzed concrete samples generated from JRR-3 and JPDR. In this report, we summarized the radioactivity concentrations of 22 radionuclides(H, C, Cl, Ca, Co, Ni, Sr, Nb, Ag, Ba, Cs, Eu, Eu, Ho, U, U, Pu, Pu, Am, Am, Cm) which were obtained from radiochemical analysis of the samples.

Establishment of reasonable 2-D model to investigate heat transfer and flow characteristics by using scale model of vessel cooling system for HTTR

Takada, Shoji; Ngarayana, I. W.*; Nakatsuru, Yukihiro*; Terada, Atsuhiko; Murakami, Kenta*; Sawa, Kazuhiro*

Mechanical Engineering Journal (Internet), 7(3), p.19-00536_1 - 19-00536_12, 2020/06

https://doi.org/10.1299/mej.19-00536

In this study reasonable 2D model was established by using FLUENT for start-up of analysis and evaluation of heat transfer flow characteristics in 1/6 scale model of VCS for HTTR. By setting up pressure vessel temperature around 200C about relatively high ratio of heat transfer via natural convection in total heat removal around 20-30%, which is useful for code to experiment benchmark in the aspect to confirm accuracy to predict temperature distribution of components which is heated up by natural convection flow. The numerical results of upper head of pressure vessel by the --SST intermittency transition model, which can adequately reproduce the separation, re-adhesion and transition, reproduced the test results including temperature distribution well in contrast to those by the - model in both cases that helium gas is evacuated or filled in the pressure vessel. It was emerged that any local hot spot did not appear on the top of upper head of pressure vessel where natural convection flow of air is separated in both cases. In addition, the plume of high temperature helium gas generated by the heating of heater was well mixed in the upper head and uniformly heated the inner surface of upper head without generating hot spots.

Verification of safety margin of reactor pressure vessel exposed to various thermal transients based on probabilistic approach

Suzuki, Masahide*; Murakami, Kenta*; Suzuki, Takashi*; Okayama, Ryuta*; Katsuyama, Jinya; Li, Y.

E-Journal of Advanced Maintenance (Internet), 11(4), p.172 - 178, 2020/02

https://www.jsm.or.jp/ejam/Vol.11No.4/AA/AA171/AA171.html

no abstracts in English

Establishment of numerical model to investigate heat transfer and flow characteristics by using scale model of vessel cooling system for HTTR

Takada, Shoji; Ngarayana, I. W.*; Nakatsuru, Yukihiro*; Terada, Atsuhiko; Murakami, Kenta*; Sawa, Kazuhiko*

Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 13 Pages, 2019/05

In the loss of core cooling test using HTTR, a technical issue is to improve prediction accuracy of temperature distribution of components in vessel cooling system (VCS). An establishment of reasonable 2D model was started by using numerical code FLUENT, which was validated using the test data by 1/6 scale model of VCS for HTTR. The pressure vessel (PV) temperature was set around 200C attributed to relatively high ratio of natural convection heat transfer around 20% in total heat removal, which is useful for code to experiment benchmark to improve prediction accuracy. It is necessary to confirm heat transfer flow characteristics around the top of PV which is heated up by natural convection flow which was considered to be affected by separation, re-adhesion and transition flow. The k--SST model was selected for turbulent calculation attributed to predict the effects mentioned above adequately. The numerical results using the k--SST model reproduced the temperature distribution of PV especially the top region which is considered to be affected by separation, re-adhesion and transition flow in contract to that using k- model which does not account the effects.