検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

詳細設計段階におけるもんじゅ2次系床ライナのひずみ評価について(研究報告)

Evaluation of mechanical integrity of floor liner in secondary heat transport system cells of Monju

芋生 和道; 大貫 康二; 菊池 裕彦; 森下 正樹 ; 井川 健一*; 西林 洋平; 池田 真輝典

Imo, Kazumichi; Onuki, Koji; Kikuchi, H.; Morishita, Masaki; Igawa, Kenichi*; Nishibayashi, Yohei; Ikeda, Makinori

もんじゅの2次系床ライナについて、漏えいナトリウムの燃焼による熱荷重条件に対する床ライナの機械的健全性を、大変形弾塑性クリープ解析及び部分構造模擬試験により評価した。 大変形弾塑性クリープ解析では、床ライナに発生する熱ひずみは床ライナに貫通性の損傷を発生させないためのひずみの目安値を下回ることを確認した。なお、温度上昇率、ライナ板板厚及び腐食減肉の有無による影響評価を行ったが、いずれのパラメータも最大ひずみに与える影響は小さかった。 部分構造模擬試験では、ひずみの目安値よりも過大なひずみを与えた場合でもライナ板に貫通性の損傷は発生しないことを実験的にも確認した。 なお、本報告書は、従来の研究報告書[1]の成果を踏まえて、評価条件を適切に見直す等して、詳細設計評価用にまとめ直したものである。

About the secondary system floor liner of Monju, the mechanical soundness of a floor liner to the thermal load conditions by combustion of leak sodium was evaluated by large displacement inelastic analysis and the partial structure model test.In large displacement inelastic analysis, it was confirmed that heat strain of a floor liner was less than the standard value of the strain for no through-wall crack. In addition, the influence evaluation by a temperature increasing rate, liner board thickness, and the existence of corrosion thinning was performed. The result, the influence on the maximum strain was small in any parameter.In the partial structure model test, even when a strain more excessive than the standard value of strain was given, it was confirmed no through-wall crack in a liner plate.In addition, this report improves the evaluation conditions of the conventional research report [1], and resummarizes them to detailed design evaluation.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.