検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

Thermal-hydraulic experiments under high pressure condition

高圧条件下での熱流動実験

Liu, W.; 玉井 秀定; 高瀬 和之; 早船 浩樹; 二神 敏  ; 木曽原 直之 

Liu, W.; Tamai, Hidesada; Takase, Kazuyuki; Hayafune, Hiroki; Futagami, Satoshi; Kisohara, Naoyuki

原子力機構では、次世代FBRで採用が検討されている、直管型蒸気発生器(SG)の熱設計手法を構築するため、実機SGを模擬した高圧条件下で試験を実施し、沸騰二相流に対する詳細なデータを取得するとともに、取得したデータをもとにボイド率や圧力損失に関する既存相関式の妥当性の評価を行っている。本報では、15MPaの圧力条件下で試験を行い、二相流圧力損失に関する既存相関式の適用性について定量的に評価した結果について報告する。一連の試験の結果、次のことが明らかになった。(1)伝熱管出入口間の圧力損失は、位置損失,摩擦損失と加速損失の和としてあらわれる。(2)位置損失や加速損失の計算に必要であるボイド率に関してはドリフトフラックスモデルの適用が可能である。(3)摩擦損失に関してはChisholm式又は均質流モデルを使って高精度に予測可能である。

For steam generator with straight double-walled heat transfer tube that used in sodium cooled Faster Breeder Reactor, flow instability is one of the most important issues need researching. As the first step of the research, thermal hydraulics experiments with water were performed under high pressure condition in JAEA with using a circular tube with a similar inner diameter as that in the designed SG. Pressure drop, heat transfer coefficients and void fraction data were derived. This paper summarizes the pressure drop characteristics under 15 MPa. Six models for the prediction of two-phase multiplier were evaluated. The results showed the Chisholm correlation and homogeneous model gave best predictions. Note that in the homogeneous model verification, the homogeneous model was only used in the friction loss calculation. In the calculation of void fraction, which is necessary for static head, drift flux model, instead of homogeneous model, was used.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.