Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Cho, S. H.*; Cho, S. W.*; Lv, Z.*; 関根 由莉奈; Liu, S.*; Zhou, M.*; Nuxoll, R. F.*; Kanatzidis, E. E.*; Ghaffari, R.*; Kim, D.*; et al.
Lab on a Chip, 9 Pages, 2025/00
被引用回数:0 パーセンタイル:0.00(Biochemical Research Methods)アミノ酸は体内のタンパク質合成と代謝プロセスに不可欠な物質である。本研究では、運動中の汗からのアミノ酸損失について定量的に調べることを目的とした。汗中のアミノ酸含有量をリアルタイムで分析するため、測定のための技術基盤としてウェアラブルなマイクロ流体システムを構築した。定量分析を実現するため、ウェアラブルデバイスに蛍光アッセイを組み込み、さらにスマートフォンベースの画像化技術を統合させたシステムを開発した。
Liu, P.-F.*; Li, X.*; Li, J.*; Zhu, J.*; Tong, Z.*; 古府 麻衣子*; 楡井 真実; Xu, J.*; Yin, W.*; Wang, F.*; et al.
National Science Review, 11(12), p.nwae216_1 - nwae216_10, 2024/12
被引用回数:8 パーセンタイル:92.79(Multidisciplinary Sciences)Crystalline solids exhibiting inherently low lattice thermal conductivity () are of great importance in applications such as thermoelectrics and thermal barrier coatings. However,
cannot be arbitrarily low and is limited by the minimum thermal conductivity related to phonon dispersions. In this work, we report the liquid-like thermal transport in a well-ordered crystalline CsAg
Te
, which exhibits an extremely low
value of
0.18 Wm
K
. On the basis of first-principles calculations and inelastic neutron scattering measurements, we find that there are lots of low-lying optical phonon modes at
3.1 meV hosting the avoided-crossing behavior with acoustic phonons. These strongly localized modes are accompanied by weakly bound rattling Ag atoms with thermally induced large amplitudes of vibrations. Using the two-channel model, we demonstrate that coupling of the particle-like phonon modes and the heat-carrying wave-like phonons is essential for understanding the low
, which is heavily deviated from the
temperature dependence of the standard Peierls theory. In addition, our analysis indicates that the soft structural framework with liquid-like motions of the fluctuating Ag atoms is the underlying cause that leads to the suppression of the heat conduction in CsAg
Te
. These factors synergistically account for the ultralow
value. Our results demonstrate that the liquid-like heat transfer could indeed exist in a well-ordered crystal.
Pan, Y.-W.*; Liu, Z.-W.*; Geng, L.-S.*; 保坂 淳; Liu, X.*
Physical Review D, 110(9), p.094004_1 - 094004_8, 2024/11
被引用回数:0 パーセンタイル:0.00(Astronomy & Astrophysics)3つの粒子からなる系が浅い束縛状態を作る可能性を指摘した。これはエフィモフ効果が関わっていると解釈される。
Wen, J.*; 鎌田 悠斗*; 横山 貢成*; 松元 達也*; Liu, W.*; 守田 幸路*; 今泉 悠也; 田上 浩孝; 松場 賢一; 神山 健司
Proceedings of 13th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS13) (Internet), 8 Pages, 2024/11
The influence of water pool height, particles diameter and wall cooling on particle bed-water pool heat transfer was evaluated by assessing the time variation of average temperatures of the particle bed and water pool, and their difference. The concept of macroscopic heat transfer coefficient of the particle bed-water pool system was introduced to elucidate the intensity of natural convection. The results show that the time variation of temperature difference initially increases, peaks, and then decreases. Based on this phenomenon, the process of heat transfer of the particles bed-water pool system was explained. According to the result, the water pool height and particle diameter will affect the heat transfer, but the current cooling conditions have little influence on the heat transfer of the particle bed.
Wen, J.*; 鎌田 悠斗*; 横山 貢成*; 松元 達也*; Liu, W.*; 守田 幸路*; 今泉 悠也; 田上 浩孝; 松場 賢一; 神山 健司
Proceedings of 31st International Conference on Nuclear Engineering (ICONE31) (Internet), 8 Pages, 2024/11
To investigate the coolability of fuel debris bed immersed in molten steel, a rectangular experimental system was built in which the particle bed was volumetrically heated via direct current heating. The experimental apparatus consists of a particle bed immersed in water and a water pool above it, which simulate disrupted solid fuel and molten steel, respectively. Computer code simulations with reactor safety analysis code SIMMER-IV were performed to help understanding the heat transfer characteristics and to validate the applicability of the newly embedded momentum exchange function (MXF) models. Under the current experimental conditions, some key parameters like the particle bed average temperature, water pool average temperature, and temperature difference between the bed and the pool were evaluated to compare with the simulation results. The comparison results showed the most applicable MXF model under the current experimental conditions, and the analysis with it well reproduced the phenomena which was observed in the experiments.
Chen, H. F.*; Liu, B. X.*; 徐 平光; Fang, W.*; Tong, H. C.*; Yin, F. X.*
Journal of Materials Research and Technology, 32, p.3060 - 3069, 2024/09
被引用回数:0 パーセンタイル:0.00(Materials Science, Multidisciplinary)The hot-rolled microstructure of medium Mn steel has coarse grains and severe elemental segregation, resulting in low strength and plasticity. Constructing a multiphase structure, refining the microstructure, and regulating elemental segregation enhance the mechanical properties. In this study, liquid nitrogen treatment created a layered distribution of austenite and martensite. Warm rolling was then used to reduce layer thickness and refine grain structure. After liquid nitrogen and warm rolling treatments, the strength and plasticity of medium Mn steel increased to 1270 MPa and 23.3%, respectively, far exceeding the hot-rolled state (724 MPa, 12.8%). Warm rolling also triggers austenite reverted transformation (ART) and introduces high-density dislocations, further improving austenite stability. This strengthening effect is higher than that from intercritical annealing alone. Improved austenite stability delays the transformation induced plasticity (TRIP) effect, preventing brittle fracture and enhancing deformation coordination between layers, significantly increasing the plastic deformation capacity of medium Mn steel.
Fang, W.*; Liu, C.*; Zhang, J.*; 徐 平光; Peng, T.*; Liu, B.*; 諸岡 聡; Yin, F.*
Scripta Materialia, 249, p.116046_1 - 116046_6, 2024/08
被引用回数:2 パーセンタイル:67.89(Nanoscience & Nanotechnology)The influence of interstitial carbon on the texture evolution of high-entropy alloys during cold rolling was investigated. To prevent carbide formation, elements with weak carbon affinity were carefully selected in the (FeMnCoNi)C
alloy. Neutron diffraction, electron channeling contrast imaging, and electron backscatter diffraction were used to analyze the texture and microstructure evolution in alloys with and without carbon addition. Though their texture components are similar at the early stage of deformation, the Brass and Goss textures in the carbon-containing alloy at 50% cold rolling reduction are obviously higher than those in the carbon-free alloy, while Copper and S textures are lower. A large number of deformation twins induced in the carbon containing alloy is attributed as the significant reason for the texture differences. This work helps to understand the impact of interstitial carbon on the texture evolution of high-entropy alloys, providing valuable insights for microstructure and performance optimization.
Wang, S.*; Wang, J.*; Zhang, S.*; Wei, D.*; Chen, Y.*; Rong, X.*; Gong, W.; Harjo, S.; Liu, X.*; Jiao, Z.*; et al.
Journal of Materials Science & Technology, 185, p.245 - 258, 2024/06
被引用回数:13 パーセンタイル:98.32(Materials Science, Multidisciplinary)Nanoprecipitates and nanoscale retained austenite (RA) with suitable stability play crucial roles in determining the yield strength (YS) and ductility of ultrahigh strength steels (UHSSs). However, owing to the kinetics incompatibility between nanoprecipitation and austenite reversion, it is highly challenging to simultaneously introduce high-density nanoprecipitates and optimized RA in UHSSs. In this work, through the combination of austenite reversion treatment (ART) and subsequent flash austenitizing (FA), nanoscale chemical heterogeneity was successfully introduced into a low-cost UHSS prior to the aging process. This chemical heterogeneity involved the enrichment of Mn and Ni in the austenite phase. The resulting UHSS exhibited dual-nanoprecipitation of Ni(Al,Mn) and (Mo,Cr) C and nanoscale austenite stabilized via Mn and Ni enrichment. The hard martensitic matrix strengthened by high-density dual-nanoprecipitates constrains the plastic deformation of soft RA with a relatively low fraction, and the presence of relatively stable nanoscale RA with adequate Mn and Ni enrichment leads to a marginal loss in YS but keeps a persistent transformation-induced plasticity (TRIP) effect. As a result, the newly-developed UHSS exhibits an ultrahigh YS of 1.7 GPa, an ultimate tensile strength (UTS) of 1.8 GPa, a large uniform elongation (UE) of 8.5 percent, and a total elongation (TE) of 13 percent. The strategy of presetting chemical heterogeneity to introduce proper metastable phases before aging can be extended to other UHSSs and precipitation-hardened alloys.
Li, X.*; Zhu, R.*; Xin, J.*; Luo, M.*; Shang, S.-L.*; Liu, Z.-K.*; Yin, C.*; 舟越 賢一*; Dippenaar, R. J.*; 肥後 祐司*; et al.
CALPHAD; Computer Coupling of Phase Diagrams and Thermochemistry, 84, p.102641_1 - 102641_6, 2024/03
被引用回数:0 パーセンタイル:0.00(Thermodynamics)The phase transformations and pressure-volume dependencies of the Ti-45Al alloy with respect to pressure have been investigated by means of in-situ observation using multi anvil-type high-pressure devices and synchrotron radiation. Under hydrostatic compression from 0 to 10.1 GPa, about 2.3 vol. % of transforms continuously to
2. Lattice parameters as well as volume fractions of these two phases have been determined as a function of pressure. Bulk moduli estimated using Birch-Murnaghan's equation of state are 148 GPa for the
phase, 138 GPa for the
2 phase, and 149 GPa for their two-phase mixture of Ti-45Al alloy. First-principles have also applied to investigate bulk moduli of two single phases, and the deviation between calculations and measurements is discussed and attributed to mainly phase transformation. The presently study provides useful insights into thermodynamics of
2 and
phases under high pressure.
Linh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Duguet, T.*; Gmez-Ramos, M.*; Holt, J. D.*; Hu, B. S.*; et al.
Physical Review C, 109(3), p.034312_1 - 034312_15, 2024/03
被引用回数:1 パーセンタイル:63.95(Physics, Nuclear)理化学研究所RIビームファクトリーにて中性子過剰核Arビームからの1中性子ノックアウト反応実験を行い、
Arのエネルギー準位および分光学的因子を導出した。特に、第一励起状態の
への分光学的因子が大きいことから、始状態の
Arの基底状態において中性子が
軌道を多く占めていることがわかった。これは、中性子数32がよい魔法数として知られる
Caとは異なった性質であり、カルシウムからアルゴンへと陽子が2個減ることで閉殻構造が大きく崩れることが明らかになった。
Li, C.*; Fang, W.*; Yu, H. Y.*; Peng, T.*; Yao, Z. T.*; Liu, W. G.*; Zhang, X.*; 徐 平光; Yin, F.*
Materials Science & Engineering A, 892, p.146096_1 - 146096_11, 2024/02
被引用回数:4 パーセンタイル:78.83(Nanoscience & Nanotechnology)The quasi-static superelastic responses and hierarchical martensite transformation from body-centered cubic (BCC) to face-centered cubic (FCC) under dynamic impact in FeMn
Al
Ni
Ti
alloys were investigated. Polycrystalline and oligocrystalline alloys were produced through solution heat treatment and cyclic heat treatment processes, respectively. The results show the volume fraction of residual martensite for oligocrystalline alloys is lower, which exhibits better superelastic responses compared with polycrystalline alloys. Dynamic impact tests indicate that, despite the weakening of the grain boundary strengthening effect, the ultimate strength of the oligocrystalline alloys closely matches that of the polycrystalline alloys under dynamic impact. The martensite transformation of the FeMnAlNiTi alloy is characterized as hierarchical under dynamic impact, and increasing strain rates and grain sizes can enhance the BCC
FCC martensite transformation, resulting in higher martensite phase fractions for oligocrystalline alloys. The increase in ultimate strength is attributed to the dynamic Hall-Petch effect introduced by more martensite phase interfaces under dynamic impact.
Chen, S.*; Browne, F.*; Doornenbal, P.*; Lee, J.*; Obertelli, A.*; 角田 佑介*; 大塚 孝治*; 茶園 亮樹*; Hagen, G.*; Holt, J. D.*; et al.
Physics Letters B, 843, p.138025_1 - 138025_7, 2023/08
被引用回数:7 パーセンタイル:83.07(Astronomy & Astrophysics)Scからの1陽子ノックアウト反応を用いて、
Caと
Caのガンマ崩壊を観測した。
Caでは1456(12)keVの
線遷移が、
Caでは1115(34)keVの遷移が観測された。どちらの遷移も暫定的に
と割り当てられた。有効核子間相互作用をわずかに修正した広い模型空間での殻模型計算では、
準位エネルギー、2中性子分離エネルギー、反応断面積が実験とよく一致し、N=34閉殻の上に新しい殻が形成されていることを裏付けた。その構成要素である
と
軌道はほぼ縮退しており、これは
Caが二重魔法核である可能性を排除し、Ca同位体のドリップラインを
Caあるいはそれ以上にまで広げる可能性がある。
Li, H.*; Liu, Y.*; Zhao, W.*; Liu, B.*; 冨永 亜希; 菖蒲 敬久; Wei, D.*
International Journal of Plasticity, 165, p.103612_1 - 103612_20, 2023/06
被引用回数:20 パーセンタイル:94.48(Engineering, Mechanical)コバルトフリーのマルエージング鋼の強度特性を明らかにするために、高エネルギー放射光X線回折法を利用したその場引張試験を行った。マルテンサイト相とオーステナイト相からの回折プロファイルが得られ、それらの強度及び幅が負荷に伴い変化している様子が観察された。回折プロファイルを解析した結果、時効(as-aged)材では、低応力レベルにてマルテンサイトの含有量が緩やかに減少し、高応力レベルでは急激に減少した。一方、熱処理(as-solution)材では、応力の増加とともにオーステナイト相がマルテンサイト相に著しく転移変態している結果が得られた。これらのことがそれぞれの強度特性に起因していることを明らかにした。
Zhang, T.*; Yao, Y.*; 守田 幸路*; Liu, X.*; Liu, W.*; 今泉 悠也; 神山 健司
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
The in-pile EAGLE ID1 test was conducted by Japan Atomic Energy Agency to demonstrate the effectiveness of the fuel assembly with an internal duct structure during a core disruptive accident in a sodium-cooled fast reactor. In this study, a new computational fluid dynamics code based on the fully Lagrangian particle method was developed for the purpose of clarifying the failure mechanism of the inner duct wall of FAIDUS. The three-dimensional simulation of the ID1 test was performed to analyze a series of thermal hydraulic behaviors leading up to duct wall failure for a computational domain that included six fuel pins. The simulations reasonably reproduced the heat transfer characteristics observed in the test, showing that the local contact of liquid steel with high thermal conductivity with the duct wall greatly enhances the heat transfer from the nuclear heating fuel to the duct wall. The results support the validity of the conclusions of our analytical study regarding the molten pool-to-duct wall heat transfer mechanism that caused the thermal failure of the duct wall.
Cao, Y.*; Zhou, H.*; Khmelevskyi, S.*; Lin, K.*; Avdeev, M.*; Wang, C.-W.*; Wang, B.*; Hu, F.*; 加藤 健一*; 服部 高典; et al.
Chemistry of Materials, 35(8), p.3249 - 3255, 2023/04
被引用回数:2 パーセンタイル:23.35(Chemistry, Physical)静水圧や化学圧力は、結晶構造を変化させる効率的な刺激であり、材料科学において電気的、磁気的特性のチューニングによく利用されている。しかし、化学圧力は定量化が困難であり、これら両者の定量的な対応関係はまだよくわかっていない。本研究では、負の熱膨張(NTE)を持つ永久磁石の候補である金属間化合物を調べた。放射光X線その場観察により、AlをドープしたHoFe
に負の化学圧力があることを明らかにし、単位セル体積の温度・圧力依存性を用いそれを定量的に評価した。また、磁化測定と中性子回折測定を組み合わせることで、磁気秩序に対する化学圧力と静水圧の違いを比較した。興味深いことに、圧力はNTEの抑制と増強を制御するために使用することができた。電子状態計算から、圧力がFermiレベル(EF)に対する主要バンドの上部に影響を与えたことを示しており、これは磁気安定性に影響を与え、それが磁気とNTEを調節する上で重要な役割を果たしていることがわかった。本研究は、圧力の影響を理解し、それを利用して機能性材料の特性を制御する良い例を示している。
Chen, J.*; 山本 慧; Zhang, J.*; Ma, J.*; Wang, H.*; Sun, Y.*; Chen, M.*; Liu, S.*; Gao, P.*; Yu, D.*; et al.
Physical Review Applied (Internet), 19(2), p.024046_1 - 024046_9, 2023/02
被引用回数:6 パーセンタイル:66.92(Physics, Applied)Coherent coupling in magnon based hybrid system has many potential applications in quantum information processing. Magnons can propagate in magnetically ordered materials without any motion of electrons, offering a unique method to build low-power-consumption devices and information channels free of heat dissipation. In this article, we demonstrate the coherent propagation of hybridized modes between spin waves and Love surface acoustic waves in a multiferroic BiFeO and ferromagnetic La
Sr
MnO
based heterostructure. The magneto-elastic coupling enables a giant enhancement of strength of the hybridized mode by a factor of 26 compared to that of the pure spin waves. A short wavelength down to 250 nm is demonstrated for the hybridized mode, which is desirable for nanoscale acousto-magnonic applications. Our combined experimental and theoretical analyses represent an important step towards the coherent control in hybrid magnonics, which may inspire the study of magnon-phonon hybrid systems for coherent information processing and manipulation.
飯村 俊*; Rosenbusch, M.*; 高峰 愛子*; 角田 佑介*; 和田 道治*; Chen, S.*; Hou, D. S.*; Xian, W.*; 石山 博恒*; Yan, S.*; et al.
Physical Review Letters, 130(1), p.012501_1 - 012501_6, 2023/01
被引用回数:12 パーセンタイル:89.17(Physics, Multidisciplinary)The atomic masses of Sc,
Ti, and
V have been determined using the high-precision multireflection time-of-flight technique. The radioisotopes have been produced at RIKEN's Radioactive Isotope Beam Factory (RIBF) and delivered to the novel designed gas cell and multireflection system, which has been recently commissioned downstream of the ZeroDegree spectrometer following the BigRIPS separator. For
Ti and
V, the mass uncertainties have been reduced down to the order of 10 keV, shedding new light on the
shell effect in Ti and V isotopes by the first high-precision mass measurements of the critical species
Ti and
V. With the new precision achieved, we reveal the nonexistence of the
empirical two-neutron shell gaps for Ti and V, and the enhanced energy gap above the occupied
p
orbit is identified as a feature unique to Ca. We perform new Monte Carlo shell model calculations including the
d
and
g
orbits and compare the results with conventional shell model calculations, which exclude the
g
and the
d
orbits. The comparison indicates that the shell gap reduction in Ti is related to a partial occupation of the higher orbitals for the outer two valence neutrons at
.
Zhang, T.*; 守田 幸路*; Liu, X.*; Liu, W.*; 神山 健司
Annals of Nuclear Energy, 179, p.109389_1 - 109389_10, 2022/12
被引用回数:3 パーセンタイル:44.16(Nuclear Science & Technology)The ID1 test was the final target test of the EAGLE experimental framework program. It was used to verify that during a core disruptive accident, the molten fuel could be discharged via wall failure of an inner duct in FAIDUS, a design concept for the sodium-cooled fast reactor. The ID1 results revealed that the wall failure behavior owed to the large heat flow from the surrounding fuel/steel mixture. The present study numerically investigated the heat transfer mechanisms in the test using the finite volume particle method in the three-dimensional domain. The thermal hydraulic behaviors during wall failure were reproduced reasonably. The present three-dimensional simulation mitigated inherent defects of our previous two-dimensional calculation and clarified that the solid fuel and liquid steel close to the outer surface of the duct can expose the duct to high thermal loads, resulting in the wall failure.
Haoran, W.*; Yu, H.*; Liu, J.*; 近藤 創介*; 大久保 成彰; 笠田 竜太*
Corrosion Science, 209, p.110818_1 - 110818_12, 2022/12
被引用回数:16 パーセンタイル:80.51(Materials Science, Multidisciplinary)新たに開発した、AlO
を形成する高Mnオーステナイト酸化物分散強化鋼(ODS)について、飽和酸素濃度下の鉛ビスマス中450
Cにて、430時間の浸漬試験を行った。非ODS鋼と比較して、ODS鋼は腐食や表面剥離に対して優れた耐性を有していた。本ODS鋼の高密度に存在する粒界が、金属元素の外方への拡散のチャネルとして機能し、元の表面から内部へ連続したCr
O
スケールを形成し、また、外部(Fe,Mn)酸化物スケールと内部Cr
O
スケールによる酸化防止と共に、Al拡散の促進は、ODS-7Al鋼中で連続的なAlリッチ酸化物スケールの形成をもたらしたため、その優れた耐食性に寄与したと考えられる。
Elekes, Z.*; Juhsz, M. M.*; Sohler, D.*; Sieja, K.*; 吉田 数貴; 緒方 一介*; Doornenbal, P.*; Obertelli, A.*; Achouri, N. L.*; 馬場 秀忠*; et al.
Physical Review C, 106(6), p.064321_1 - 064321_10, 2022/12
被引用回数:2 パーセンタイル:33.33(Physics, Nuclear)Vと
Vの低励起準位構造を初めて探索した。
Vについては中性子ノックアウト反応と陽子非弾性散乱が、
Vについては中性子ノックアウト反応データが得られた。
Vについては4つ、
Vについては5つの新たな遷移が確認された。Lenzi-Nowacki-Poves-Sieja (LNPS)相互作用に基づく殻模型計算との比較によって、それぞれの同位体について確認されたガンマ線のうち3つが、first 11/2
状態とfirst 9/2
状態からの崩壊と決定された。
Vについては、(
,
)非弾性散乱断面積は四重極変形と十六重極変形を想定したチャネル結合法により解析されたが、十六重極変形の影響により、明確に反転の島に属するとは決定できなかった。