検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

低放射化フェライト鋼F82Hの高温高圧水中腐食特性への試験温度の影響

Effect of test temperature on corrosion properties of F82H in high temperature pressurized water

中島 基樹; 廣瀬 貴規; 谷川 尚; 河村 繕範

Nakajima, Motoki; Hirose, Takanori; Tanigawa, Hisashi; Kawamura, Yoshinori

日本では水冷却固体増殖方式のブランケットをITER-テストブランケットモジュール(TBM)計画において試験し、原型炉においても主案としている。本方式では加圧水型原子炉相当の高温高圧水を用いることから、低放射化フェライト鋼F82Hと高温高圧水との共存性の理解が求められている。また、TBMでは入口温度が270$$^{circ}$$C程度、出口温度が320$$^{circ}$$C程度となるため、当該範囲での腐食特性について理解する必要がある。過去に実施したDO20ppbから8ppmの範囲での腐食試験の結果から、DO20ppbの環境で腐食量が最も大きくなることを明らかとしているため、本研究ではDO20ppbで270$$^{circ}$$Cから320$$^{circ}$$Cの温度範囲で腐食試験を実施し、重量減少への試験温度の影響について検討した。腐食試験の結果、DO20ppbでは温度の増加に伴い、腐食量も増加していた。入口温度と出口温度では2倍程度腐食量が違うことが分かった。

As the primary candidate of ITER-TBM of Japan, development of WCCB TBM is being performed. In this blanket, the high temperature pressurized water was used as the coolant. Therefore it is necessary to understand the corrosion mechanism in high temperature pressurized water. Additionally, it is also required that understanding of corrosion properties of temperature ranging from 543K to 593K, because inlet and outlet temperatures of TBM are 543K and 593K, respectively. In this study, the corrosion test was performed at temperature ranging from 543K to 593K in high temperature water. Based on the results of corrosion test, the corrosion amount was increased with increasing the test temperature. The corrosion amount of outlet water was two times larger than that of inlet water.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.