検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

Study on the thermal-hydraulic of TEF-T LBE spallation target in JAEA

Wan, T.; 大林 寛生; 佐々 敏信

Wan, T.; Obayashi, Hironari; Sasa, Toshinobu

To realize the future Accelerator-driven systems (ADSs), an ADS Target Test Facility (TEF-T) will be constructed within the framework of Japan Proton Accelerator Research Complex (J-PARC) project to carry out basic R&Ds. A LBE spallation target will be installed in the TEF-T facility and be bombarded by high power pulsed proton beams (250 kW, 400 MeV, 25 Hz, 0.5 ms in pulse duration). The beam window (BW) of the spallation target is critical because it should survive under severe conditions, i.e., high temperature, high irradiation, intense stress and various occurred damage. Therefore, the target vessel should be carefully designed to obtain enough safety margin. Our previous research indicated that there are stagnant flow region in LBE at the BW tip due to the symmetric configuration of target, which causes high temperature and stress concentration on the BW. To reduce/move the stagnant flow region from BW tip and to increase the target safety margin, on the basis of our previous work, three types of upgraded target head designs were performed steadily in the present study. The thermal-hydraulic analyses and structural analyses for the target head designs have been carried out numerically under a steady-state condition. Results illustrated that the designs can almost eliminate the stagnant flow region in LBE. As a consequence, the thermal stress concentration on BW has been released and greatly decreased. The safety margin of target has been improved through this study.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.