Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tc separation/concentration technology from 
Mo by (n, 
) method, 2Fujita, Yoshitaka; Hu, X.*; Yang, Y.*; Kitagawa, Taiga*; Fujihara, Yasuyuki*; Yoshinaga, Hisao*; Hori, Junichi*; Do, T. M. D.*; Suzuki, Tatsuya*; Suematsu, Hisayuki*; et al.
KURNS Progress Report 2023, P. 122, 2024/07
no abstracts in English
Hu, X.*; Fujita, Yoshitaka; Tsuchiya, Kunihiko; Fukutani, Satoshi*; Hori, Junichi*; Suzuki, Tatsuya*
Journal of Radioanalytical and Nuclear Chemistry, 333(11), p.6057 - 6063, 2024/05
Times Cited Count：0 Percentile：0.00(Chemistry, Analytical)no abstracts in English
Mo hot atoms made by a neutron capture method from 
-MoO
to waterQuach, N. M.*; Ngo, M. C.*; Yang, Y.*; Nguyen, T. B.*; Nguyen, V. T.*; Fujita, Yoshitaka; Do, T. M. D.*; Nakayama, Tadachika*; Suzuki, Tatsuya*; Suematsu, Hisayuki*
Journal of Radioanalytical and Nuclear Chemistry, 332(10), p.4057 - 4064, 2023/10
Times Cited Count：4 Percentile：62.75(Chemistry, Analytical)Technetium-99m (Tc) is the most widely used medical radioisotope in the world and is produced from molybdenum-99 (Mo). Production of Mo via the neutron capture method draws attention as an alternative to fission-derived Mo due to non-proliferation issues, but the specific radioactivity of Mo is extremely low. In this work, a porous -MoO wire was prepared as an irradiation target in order to improve the specific activity by extracting Mo. Porous -MoO wire is synthesized from Mo metal wire by a two-step heating procedure. The hot atom effect of Mo was confirmed by activity and isotope measurements of the porous -MoO wire after neutron irradiation and the water used for extraction. In term of the extraction effectiveness, the effectiveness of Mo extraction in the porous -MoO wire was comparable to that of commercial -MoO powder.
-MoO whiskers in Mo/
Tc radioisotope production and Mo/Tc extraction using hot atomsNgo, M. C.*; Fujita, Yoshitaka; Suzuki, Tatsuya*; Do, T. M. D.*; Seki, Misaki; Nakayama, Tadachika*; Niihara, Koichi*; Suematsu, Hisayuki*
Inorganic Chemistry, 62(32), p.13140 - 13147, 2023/08
Times Cited Count：5 Percentile：54.36(Chemistry, Inorganic & Nuclear)Technetium-99m (Tc) is one of the most important radioisotopes for diagnostic radio-imaging applications. Tc is a daughter product of the Mo isotope. There are two methods used to produce Mo/Tc: the nuclear fission (n,f) and the neutron capture (n,) methods. Between them, the (n,f) method is the main route, used for approximately 90% of the world's production. However, the (n,f) method faces numerous problems, including the use of highly enriched uranium, the release of highly radioactive waste, and nonproliferation problems. Therefore, the (n,) method is being developed as a future replacement for the (n,f) method. In this work, -MoO whiskers prepared by the thermal evaporation method and -MoO particles were irradiated in a nuclear reactor to produce Mo/Tc via neutron capture. The irradiated targets were dispersed into water to extract the Mo/Tc. As a result, -MoO whisker yielded higher Mo extraction rate than that from -MoO. In addition, by comparing the dissolved 
Mo concentrations in water, we clarified a prominent hot-atom of -MoO whiskers. This research is the first demonstration of -MoO being used as an irradiation target in the neutron capture method. On the basis of the results, -MoO is considered a promising irradiation target for producing Mo/Tc by neutron capture and using water for the radioisotope extraction process in the future.
Tc separation/concentration technology from Mo by (n, ) methodFujita, Yoshitaka; Hu, X.*; Takeuchi, Tomoaki; Takeda, Ryoma; Fujihara, Yasuyuki*; Yoshinaga, Hisao*; Hori, Junichi*; Suzuki, Tatsuya*; Suematsu, Hisayuki*; Ide, Hiroshi
KURNS Progress Report 2022, P. 110, 2023/07
no abstracts in English
Mo/Tc generator by (n, ) method, 4Fujita, Yoshitaka; Seki, Misaki; Ngo, M. C.*; Do, T. M. D.*; Hu, X.*; Yang, Y.*; Takeuchi, Tomoaki; Nakano, Hiroko; Fujihara, Yasuyuki*; Yoshinaga, Hisao*; et al.
KURNS Progress Report 2021, P. 118, 2022/07
no abstracts in English
Fujita, Yoshitaka; Niizeki, Tomotake*; Fukumitsu, Nobuyoshi*; Ariga, Katsuhiko*; Yamauchi, Yusuke*; Malgras, V.*; Kaneti, Y. V.*; Liu, C.-H.*; Hatano, Kentaro*; Suematsu, Hisayuki*; et al.
Bulletin of the Chemical Society of Japan, 95(1), p.129 - 137, 2022/01
Times Cited Count：10 Percentile：61.73(Chemistry, Multidisciplinary)In this work, the mechanisms responsible for the adsorption of molybdate ions on alumina are investigated using in-depth surface analyses carried out on alumina specimens immersed in solutions containing different molybdate ions at different pH values. The obtained results reveal that when alumina is immersed in an acidic solution containing molybdate ions, the hydroxyl groups present on the surface are removed to generate positively charged sites, and molybdate ions (MoO
or AlMo
O
H
) are adsorbed by electrostatic interaction. Alumina dissolves slightly in an acidic solution to form AlMoOH, which is more easily desorbed than MoO. Furthermore, the enhancement in the Mo adsorption or desorption property may be achieved by enriching the surface of the alumina adsorbent with many -OH groups and optimizing Mo solution to adsorb molybdate ions on alumina as MoO ions. These findings will assist researchers in engineering more efficient and stable alumina-based adsorbents for molybdenum adsorption used in medical radioisotope (Mo/Tc) generators.
Mo adsorption and Tc elution with alumina columnsFujita, Yoshitaka; Seki, Misaki; Sano, Tadafumi*; Fujihara, Yasuyuki*; Suzuki, Tatsuya*; Yoshinaga, Hisao*; Hori, Junichi*; Suematsu, Hisayuki*; Tsuchiya, Kunihiko
Journal of Physics; Conference Series, 2155, p.012018_1 - 012018_6, 2022/01
Technetium-99m (Tc), the daughter nuclide of Molybdenum-99 (Mo), is the most commonly used radioisotope in radiopharmaceuticals. The research and development (R&D) for the production of Mo by the neutron activation method ((n, ) method) has been carried out from viewpoints of no-proliferation and nuclear security, etc. Since the specific activity of Mo produced by the (n, ) method is extremely low, developing Al
O with a large Mo adsorption capacity is necessary to adapt (n, )Mo to the generator. In this study, three kinds of AlO specimens with different raw materials were prepared and compared their adaptability to generators by static and dynamic adsorption. MoO pellet pieces (1.5g) were irradiated with 5 MW for 20 min in the Kyoto University Research Reactor (KUR). Irradiated MoO pellet pieces were dissolved in 6M-NaOH aq. In dynamic adsorption, 1 g of AlO was filled into a PFA tube (
1.59 mm). The Mo adsorption capacity of AlO specimens under dynamic condition was slightly reduced compared to that under static condition. The Tc elution rate was about 100% at 1.5 mL of milking in dynamic adsorption, while it was around 56-87% in static adsorption. The Mo/Tc ratio of dynamic condition was greatly reduced compared to that of static condition. Therefore, the Tc elution property is greatly affected by the method of adsorbing Mo, e.g., the column shape, the linear flow rate, etc.
Mo/Tc generator by (n, ) method, 3Fujita, Yoshitaka; Seki, Misaki; Namekawa, Yoji*; Nishikata, Kaori; Daigo, Fumihisa; Ide, Hiroshi; Tsuchiya, Kunihiko; Sano, Tadafumi*; Fujihara, Yasuyuki*; Hori, Junichi*; et al.
KURNS Progress Report 2020, P. 136, 2021/08
no abstracts in English
Mo-adsorption/Tc-elution properties of alumina with different surface structuresFujita, Yoshitaka; Seki, Misaki; Sano, Tadafumi*; Fujihara, Yasuyuki*; Kitagawa, Tomoya*; Matsukura, Minoru*; Hori, Junichi*; Suzuki, Tatsuya*; Tsuchiya, Kunihiko
Journal of Radioanalytical and Nuclear Chemistry, 327(3), p.1355 - 1363, 2021/03
Times Cited Count：4 Percentile：40.86(Chemistry, Analytical)We prepared three types of AlO with different surface structures and investigated Mo-adsorption/Tc-elution properties using [Mo]MoO that was irradiated in the Kyoto University Research Reactor. AlO adsorbed [Mo]molybdate ions in solutions at different pH; the lower was the pH, the higher was the Mo-adsorption capacity of AlO. The Tc-elution properties of molybdate ion adsorbed AlO were elucidated by flowing saline. Consequently, it was suggested that Mo-adsorption/desorption properties are affected by the specific surface of AlO and Tc-elution properties are affected by the crystal structure of AlO.
Mo/Tc generator by (n,) method, 2Fujita, Yoshitaka; Seki, Misaki; Namekawa, Yoji*; Nishikata, Kaori; Kato, Yoshiaki; Sayato, Natsuki; Tsuchiya, Kunihiko; Sano, Tadafumi*; Fujihara, Yasuyuki*; Hori, Junichi*; et al.
KURNS Progress Report 2019, P. 157, 2020/08
no abstracts in English
Mo/Tc generator by (n,) methodFujita, Yoshitaka; Seki, Misaki; Namekawa, Yoji*; Nishikata, Kaori; Kimura, Akihiro; Shibata, Akira; Sayato, Natsuki; Tsuchiya, Kunihiko; Sano, Tadafumi*; Fujihara, Yasuyuki*; et al.
KURNS Progress Report 2018, P. 155, 2019/08
no abstracts in English
Saptiama, I.*; Kaneti, Y. V.*; Suzuki, Yoshitaka; Tsuchiya, Kunihiko; Fukumitsu, Nobuyoshi*; Sakae, Takeji*; Kim, J.*; Kang, Y.-M.*; Ariga, Katsuhiko*; Yamauchi, Yusuke*
Small, 14(21), p.1800474_1 - 1800474_14, 2018/05
Times Cited Count：63 Percentile：89.71(Chemistry, Multidisciplinary)no abstracts in English
Mo/Tc generatorsSuzuki, Yoshitaka; Kitagawa, Tomoya*; Namekawa, Yoji*; Matsukura, Minoru*; Nishikata, Kaori; Mimura, Hitoshi*; Tsuchiya, Kunihiko
Transactions of the Materials Research Society of Japan, 43(2), p.75 - 80, 2018/04
no abstracts in English
Saptiama, I.*; Kaneti, Y. V.*; Oveisi, H.*; Suzuki, Yoshitaka; Tsuchiya, Kunihiko; Takai, Kimiko*; Sakae, Takeji*; Pradhan, S.*; Hossain, M. S. A.*; Fukumitsu, Nobuyoshi*; et al.
Bulletin of the Chemical Society of Japan, 91(2), p.195 - 200, 2018/02
Times Cited Count：49 Percentile：80.94(Chemistry, Multidisciplinary)no abstracts in English
Shibata, Hiroshi; Nakano, Hiroko; Suzuki, Yoshitaka; Otsuka, Noriaki; Nishikata, Kaori; Takeuchi, Tomoaki; Hirota, Noriaki; Tsuchiya, Kunihiko
JAEA-Testing 2017-002, 138 Pages, 2017/12
JAEA-Testing-2017-002.pdf:9.3MB
From the viewpoints of utilization improvement of the Japan Materials Testing Reactor (JMTR), the experimental devices have been established for the out-pile tests in the irradiation technology development building. The devices for the irradiation capsule assembly, material tests and inspections were established at first and experimental data were accumulated before the neutron irradiation tests. On the other hand, after the Great East Japan Earthquake, the repairs and earthquake-resistant measures of the existing devices were carried out. New devices and equipments were also established for the R&D program for power plant safety enhancement of the Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry (METI) and Mo/Tc production development under the Tsukuba International Strategic Zone. This report describes the outline and basic operation manuals of the devices established from 2011 to 2016 and the management points for the safety works in the irradiation technology development building.
Saptiama, I.*; Kaneti, Y. V.*; Suzuki, Yumi*; Suzuki, Yoshitaka; Tsuchiya, Kunihiko; Sakae, Takeji*; Takai, Kimiko*; Fukumitsu, Nobuyoshi*; Alothman, Z. A.*; Hossain, M. S. A.*; et al.
Bulletin of the Chemical Society of Japan, 90(10), p.1174 - 1179, 2017/10
Times Cited Count：45 Percentile：77.14(Chemistry, Multidisciplinary)no abstracts in English
Suzuki, Yoshitaka; Ishida, Takuya*; Suzuki, Yumi*; Matsukura, Minoru*; Kurosaki, Fumio*; Nishikata, Kaori; Mimura, Hitoshi*; Tsuchiya, Kunihiko
JAEA-Technology 2016-027, 24 Pages, 2016/12
JAEA-Technology-2016-027.pdf:4.15MB
The research and development (R&D) on the production of Mo/Tc by (n,) method has been carried out in the Neutron Irradiation and Testing Reactor Center. The Mo production by (n,) reaction is a simple and easy method, and it also is advantageous from viewpoints of nuclear proliferation resistance and waste management. However, it is difficult to produce the Tc solution with high radioactive concentration because the specific radioactivity of Mo by this method is extremely low. Up to now, various Mo absorbents such as Polyzirconium Compound (PZC) and Polytitanium Compound (PTC) have been developed with high Mo adsorption efficiency. It is necessary for utilization to the generator of these absorbents to evaluate the effect of elements containing these absorbents and to assure the quality of Tc solution. In this report, the status of R&D of the Mo adsorbents was investigated. The alumina as Mo adsorbent, which uses in medical Mo/Tc generator, was focused and Mo adsorption/desorption properties of three kinds of alumina was evaluated by different properties such as crystal structure and specific surface.
pellets for Mo-99 production, 3Ishida, Takuya; Suzuki, Yoshitaka; Nishikata, Kaori; Yonekawa, Minoru; Kato, Yoshiaki; Shibata, Akira; Kimura, Akihiro; Matsui, Yoshinori; Tsuchiya, Kunihiko; Sano, Tadafumi*; et al.
KURRI Progress Report 2015, P. 64, 2016/08
no abstracts in English
Tc solution from Mo to be obtained by (
) reaction; A Preliminary study using inactive Re instead of TcTanase, Masakazu*; Fujisaki, Saburo*; Ota, Akio*; Shiina, Takayuki*; Yamabayashi, Hisamichi*; Takeuchi, Nobuhiro*; Tsuchiya, Kunihiko; Kimura, Akihiro; Suzuki, Yoshitaka; Ishida, Takuya; et al.
Radioisotopes, 65(5), p.237 - 245, 2016/05
no abstracts in English
