検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 173 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

発表言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Investigation of sorption behavior of $$^{137}$$Cs in a river-sea system boundary area after the Fukushima Dai-ichi Nuclear Power Plant accident

高田 兵衛*; 脇山 義史*; 和田 敏裕*; 平尾 茂一*; 青野 辰雄*; 中西 貴宏; 御園生 敏治; 尻引 武彦; 青山 道夫*

Marine Chemistry, 262, p.104384_1 - 104384_6, 2024/05

 被引用回数:1 パーセンタイル:45.28(Chemistry, Multidisciplinary)

The radiocesium ($$^{137}$$Cs) distribution between dissolved and particulate phases was examined in river water and coastal seawater as a function of the $$^{137}$$Cs sorption behavior on suspended particles. Dissolved $$^{137}$$Cs activity concentrations in the Tomioka River (salinity $$<$$ 0.1) and in coastal seawater at Tomioka fishery port (salinity $$>$$ 30), Fukushima Prefecture, from June 2019 to October 2021 were 3.6-20 Bq/m$$^{3}$$ (geometric mean 11 Bq/m$$^{3}$$) and 2.4-86 Bq/m$$^{3}$$ (13 Bq/m$$^{3}$$), respectively. Although the suspended particle concentration was lower in the river (0.2-44 mg/L; geometric mean 2 mg/L) than in seawater (0.8-24 mg/L; 6.4 mg/L), the mean $$^{137}$$Cs activity on suspended particles was 11,000 Bq/kg-dry in the river versus 3,200 Bq/kg-dry in seawater. Proportions of ion-exchangeable, organically bound, and refractory fractions of $$^{137}$$Cs on suspended particles were determined by sequential extraction. The ion-exchangeable fraction accounted for 0.3-2.0% (mean 1.2%) and 0.4-1.3% (0.8%) at the river and port sites, respectively. The organically bound fraction accounted for 0.3-4.8% (1.8%) and 0.1-5.5% (2.1%) at the river and port sites, respectively. In both areas, the refractory fraction accounted for $$>$$ 90% of $$^{137}$$Cs. Unexpectedly, the ion-exchangeable fraction did not differ between the river and port sites, and the percentage at the river site did not vary during the sampling period. Therefore, the ion-exchangeable fraction in the river's lower reach was originally low or had decreased before the particles arrived there. The small labile $$^{137}$$Cs fraction on suspended particles indicates that the mobility of radiocesium to marine biota in this coastal region is low.

論文

Sodium-cooled Fast Reactors

大島 宏之; 森下 正樹*; 相澤 康介; 安藤 勝訓; 芦田 貴志; 近澤 佳隆; 堂田 哲広; 江沼 康弘; 江連 俊樹; 深野 義隆; et al.

Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07

ナトリウム冷却高速炉(SFR: Sodium-cooled Fast Reactor)の歴史や、利点、課題を踏まえた安全性、設計、運用、メンテナンスなどについて解説する。AIを利用した設計手法など、SFRの実用化に向けた設計や研究開発についても述べる。

論文

Distinguishing adsorbed and deposited ionomers in the catalyst layer of polymer electrolyte fuel cells using contrast-variation small-angle neutron scattering

原田 雅史*; 高田 慎一; 岩瀬 裕希*; 梶谷 修司*; 門浦 弘明*; 金谷 利治*

ACS Omega (Internet), 6(23), p.15257 - 15263, 2021/06

 被引用回数:24 パーセンタイル:77.83(Chemistry, Multidisciplinary)

The ionomers distributed on carbon particles in the catalyst layer of polymer electrolyte fuel cells (PEFCs) govern electrical power via proton transport and oxygen permeation to active platinum. Thus, ionomer distribution is a key, to PEFC performance. This distribution is characterized by ionomer adsorption and deposition onto carbon during the catalyst-ink coating process; however, the adsorbed and deposited ionomers cannot easily be distinguished in the catalyst layer. Therefore, we identified these two types of ionomers based on the positional correlation between the ionomer and carbon Particles. From fitting with a model for a fractal aggregate of polydisperse core-shell spheres we determined the adsorbed-ionomer thickness on the carbon particle to be 51 angstrom land the deposited-ionomer amount for the total ionomer to be 50%. Our technique for ionomer differentiation can be used to optimally design PEFC catalyst layers.

論文

Alternation of magnetic anisotropy accompanied by metal-insulator transition in strained ultrathin manganite heterostructures

小林 正起*; Anh, L. D.*; 鈴木 雅弘*; 金田-高田 真悟*; 竹田 幸治; 藤森 伸一; 芝田 悟朗*; 田中 新*; 田中 雅明*; 大矢 忍*; et al.

Physical Review Applied (Internet), 15(6), p.064019_1 - 064019_10, 2021/06

 被引用回数:8 パーセンタイル:47.11(Physics, Applied)

A fundamental understanding of the interfacial magnetic properties in ferromagnetic heterostructures is essential for utilizing ferromagnetic materials for spintronic device applications. Here, we investigate the interfacial magnetic and electronic structures of epitaxial single-crystalline LaAlO$$_3$$(LAO)/La$$_{0.6}$$Sr$$_{0.4}$$MnO$$_3$$(LSMO)/Nb:SrTiO$$_3$$(Nb:STO) heterostructures with varying LSMO layer thicknesses, in which the magnetic anisotropy strongly changes with the LSMO thickness due to the delicate balance between strains originating from both the Nb:STO and LAO layers, using X-ray magnetic circular dichroism and photoemission spectroscopy. We successfully detect the clear change of the magnetic behavior of the Mn ions concomitant with the thickness-dependent metal-insulator transition. Our results suggest that the double-exchange interaction induces ferromagnetism in the metallic LSMO film under tensile strain caused by the STO substrate, while the superexchange interaction determines the magnetic behavior in the insulating LSMO film under compressive strain originating from the top LAO layer. The change in strain, depending on LSMO layer thickness, is confirmed by scanning transmission electron microscopy. Based on those findings, the formation of a magnetic dead layer near the LAO/LSMO interface is attributed to competition between the superexchange interaction via Mn $$3d_{3z^2-r^2}$$ orbitals under compressive strain and the double-exchange interaction via the $$3d_{x^2-y^2}$$ orbitals. These findings provide key aspects of ferromagnetic oxide heterostructures for the development of spintronic device applications.

論文

High temperature gas-cooled reactors

武田 哲明*; 稲垣 嘉之; 相原 純; 青木 健; 藤原 佑輔; 深谷 裕司; 後藤 実; Ho, H. Q.; 飯垣 和彦; 今井 良行; et al.

High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02

本書は、原子力機構における今までの高温ガス炉の研究開発の総括として、HTTRの設計、燃料、炉内構造物や中間熱交換器などの要素技術の開発、出力上昇試験、950$$^{circ}$$Cの高温運転、安全性実証試験などの運転経験及び成果についてまとめたものである。また、HTTRでの知見をもとに、商用炉の設計、高性能燃料、ヘリウムガスタービン、ISプロセスによる水素製造などの要素技術開発の現状について記述しており、今後の高温ガス炉の開発に非常に有用である。本書は、日本機械学会の動力エネルギーシステム部門による化石燃料及び原子力によるエネルギーシステムの技術書のシリーズの一冊として刊行されるものである。

論文

Structural investigation of sulfonated polyphenylene ionomers for the design of better performing proton-conductive membranes

椎野 佳祐*; 大友 季哉; 山田 武*; 有馬 寛*; 廣井 孝介; 高田 慎一; 三宅 純平*; 宮武 健治*

ACS Applied Polymer Materials (Internet), 2(12), p.5558 - 5565, 2020/11

 被引用回数:28 パーセンタイル:75.49(Materials Science, Multidisciplinary)

To achieve high-performance proton-exchange membranes (PEMs), understanding of the polymer structure/ property relationship is crucial. In particular, the structure of water clusters (number, size, interdomain distance, interconnectivity, etc.) and hydrophobic domains dominates important membrane properties, such as proton conductivity and mechanical strength, which can be adjusted by the monomer sequence in the polymer chains. In the present paper, we have prepared three sulfonated polyphenylene-based copolymers (SPP-MP, SPP-BP, and SPP-QP) whose main chain components were the same but their sequence differed by the use of different hydrophobic monomers (monophenylene, -MP; biphenylene, -BP; and quinquephenylene, -QP, respectively). Careful investigation of the proton nuclear magnetic resonance (1H NMR) spectra suggested that the randomness of the hydrophilic component (sulfophenylene unit) was dominated by the hydrophobic component: 51 % for -MP, 32 % for -BP, and 19 % for -QP, respectively. Transmission electron microscopy (TEM) observation of the three polyphenylene ionomer membranes revealed that the lower randomness of the hydrophilic component caused a larger hydrophilic domain size in their phase-separated morphology under dry conditions. Small-angle X-ray scattering (SAXS) measurements suggested that SPP-QP, with the lowest randomness of the hydrophilic component, possessed the most pronounced periodic structure under humidified conditions.

論文

Effects of surface tension and viscosity on liquid jet breakup

Zhan, Y.*; 桑田 裕介*; 丸山 清嵩*; 大川 富雄*; 榎木 光治*; 青柳 光裕; 高田 孝

Experimental Thermal and Fluid Science, 112, p.109953_1 - 109953_8, 2020/04

 被引用回数:16 パーセンタイル:73.31(Thermodynamics)

The breakup process of liquid jet was explored through visualization to develop a prediction model for liquid splash. Water, ethanol aqueous solution, and glycerin aqueous solution were used as the test liquids to explore the effects of surface tension and viscosity. Since the droplets were produced due to jet breakup, the impact frequency was zero just downstream of the nozzle and increased asymptotically with an increase in the distance from the nozzle. Thus, auxiliary correlations were developed for the minimum breakup length where the jet breakup is initiated, the maximum breakup length where the jet breakup is completed, the mean droplet size and the impact frequency. It was demonstrated that the impact frequencies calculated by the proposed model agree with the experimental data fairly well. For the application to coolant leakage in sodium-cooled fast reactors, a simple method to ensure conservative estimation of the impact frequency was also proposed.

論文

Droplet generation during liquid jet impingement onto a horizontal plate

Zhan, Y.*; 大箭 直輝*; 榎木 光治*; 大川 富雄*; 青柳 光裕; 高田 孝

Experimental Thermal and Fluid Science, 98, p.86 - 94, 2018/11

 被引用回数:17 パーセンタイル:68.27(Thermodynamics)

In sodium-cooled fast reactors, liquid sodium leakage may lead to fire accident. In the case that the liquid sodium is discharged as a liquid jet, a number of droplets are produced during liquid jet impingement on the structures. In the present work, a liquid jet was emanated vertically downward from a circular nozzle hole onto a horizontal disk to measure the total amount and the maximum size of splashed droplets. It was found that a significant amount of liquid was splashed when the liquid jet impinged as a broken jet. Thus, a prediction method was first developed for the impact frequency of the primary droplets produced due to the jet breakup. It was then shown that a phenomenological model using the impact frequency and the impact Weber number as the important variables can predict the splashing rate well. It was also indicated that the size of the maximum splashed droplets was fairly proportional to the size of primary droplets.

論文

A Study on splashing during liquid jet impingement onto a horizontal plate

桑田 裕介*; Zhan, Y.*; 榎木 光治*; 大川 富雄*; 青柳 光裕; 高田 孝

Proceedings of 12th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-12) (USB Flash Drive), 10 Pages, 2018/10

ナトリウム冷却高速炉の冷却材が漏洩した場合の熱影響解析精度向上に向けて、ノズルより鉛直下向きに液体を噴射し、水平固体面に衝突した場合の粘度を考慮した飛散液滴量相関式について検討した。

論文

Preferred site occupation of 3$$d$$ atoms in Ni$$_{x}$$Fe$$_{4-x}$$N (${it x}$ = 1 and 3) films revealed by X-ray absorption spectroscopy and magnetic circular dichroism

高田 郁弥*; 伊藤 啓太*; 竹田 幸治; 斎藤 祐児; 高梨 弘毅*; 木村 昭夫*; 末益 崇*

Physical Review Materials (Internet), 2(2), p.024407_1 - 024407_5, 2018/02

 被引用回数:15 パーセンタイル:45.34(Materials Science, Multidisciplinary)

X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism measurements were performed at the Ni and Fe $$L_{2,3}$$ absorption edges for Ni$$_{x}$$Fe$$_{4-x}$$N (${it x}$ = 1 and 3) epitaxial films. Shoulders at approximately 2 eV above the Ni $$L_{2,3}$$ main peaks in the XAS spectrum of Ni$$_{3}$$FeN were interpreted to originate from hybridization of orbitals between Ni 3$$d$$ at face-centered (II) sites and N 2$$p$$ at body-centered sites, while such features were missing in NiFe$$_{3}$$N film. Similar shoulders were observed at Fe $$L_{2,3}$$ edges in both films. Hence, Ni atoms preferentially occupied corner (I) sites, where the hybridization was weak because of the relatively long distance between Ni at I sites and N atoms. The relatively large magnetic moment deduced from sum-rule analysis of NiFe$$_{3}$$N also showed a good agreement with the presence of Ni atoms at I sites.

論文

Splash during liquid jet impingement onto a horizontal plate

Zhan, Y.*; 大箭 直輝*; 榎木 光治*; 大川 富雄*; 大野 修司; 青柳 光裕; 高田 孝

Proceedings of 25th International Conference on Nuclear Engineering (ICONE-25) (CD-ROM), 6 Pages, 2017/07

ナトリウム(Na)冷却高速炉におけるNa漏えい・燃焼時の熱影響を適切な信頼性確保しつつ解析評価するためには、漏えいNaの液滴量を物理的な観点から合理的に設定することが重要である。本研究では基礎実験として、下向きの水噴流を水平板に衝突させ、その際の液滴化率を計測した。計測の結果として液滴飛散率は、ウェーバー数と無次元衝突頻度の関数として定式化できることが示された。

論文

Production of droplets during liquid jet impingement onto a flat plate

Yi, Z.*; 大箭 直輝*; 榎木 光治*; 大川 富雄*; 大野 修司; 青柳 光裕; 高田 孝

Proceedings of 10th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-10) (USB Flash Drive), 7 Pages, 2016/11

ナトリウム(Na)冷却高速炉におけるNa漏えい・燃焼時の熱影響を適切な信頼性確保しつつ解析評価するためには、漏えいNaの液滴量を物理的な観点から合理的に設定することが重要である。本研究では基礎実験として、下向きの水噴流を水平板に衝突させ、その際の液滴化率を計測した。計測の結果として液滴飛散率は、ウェーバー数とストローハル数、オーネゾルゲ数の関数として定式化できることが示された。

論文

Reliability enhancement of seismic risk assessment of NPP as risk management fundamentals; Quantifying epistemic uncertainty in fragility assessment using expert opinions and sensitivity analysis

崔 炳賢; 西田 明美; 糸井 達哉*; 高田 毅士*; 古屋 治*; 牟田 仁*; 村松 健

Proceedings of 13th Probabilistic Safety Assessment and Management Conference (PSAM-13) (USB Flash Drive), 8 Pages, 2016/10

本研究では、原子力施設のフラジリティ評価における認識論的不確定性評価に関する検討を行っている。検討のひとつとして、フラジリティ評価にかかわる重要因子の抽出と定量化のため、3次元有限要素モデルと質点系モデルを用いた原子炉建屋の地震応答解析結果の感度解析を実施し、主要因子に起因するばらつきを評価した。その結果を活用し、原子力施設のフラジリティ評価フローにおける認識論的不確定性レベルを段階的に区分し、将来のフラジリティ評価に活用可能な形で「専門知ツリー」を提案した。

論文

Stripline beam position monitors with improved frequency response and their coupling impedances

菖蒲田 義博; Chin, Y. H.*; 高田 耕治*; 外山 毅*; 仲村 佳悟*

Proceedings of 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB 2016) (Internet), p.523 - 528, 2016/08

J-PARCのシンクロトロン(特にMR)では、ビーム強度を上げていくと、将来、電子雲によるビームの不安定化が起こることが懸念されている。このビームの不安定性をモニターで検知するには、GHz帯まで周波数特性の良いモニターが必要である。モニターの電極形状とモニターの周波数特性には相関があることが分かっていて、指数関数型の電極形状が採用されることが一般的である。しかし、これを精度よく製作することは、極めて困難である。実際、J-PARC MRのモニターの特性は、1GHzを超えると極端に悪くなっている。そこで、われわれは、三角形状や五角形状の電極を提案することにした。シミュレーション上は、これで、指数関数型の電極形状と同程度の周波数特性を得ることができることが分かる。さらに、この形状は製作が圧倒的に簡単なので、現実的には、指数関数型の電極形状の周波数特性を圧倒できることを、実際の測定で示すことができる。一方で、この改良でビームとの結合インピーダンスが悪化すると、ビームを安定化させるという意味で問題である。この発表では、改良した電極の周波数特性とその結合インピーダンスを示すことで、結合インピーダンスを増大させることなく周波数特性を改善できることを示すことにする。

論文

Triangle and concave pentagon electrodes for an improved broadband frequency response of stripline beam position monitors

菖蒲田 義博; Chin, Y. H.*; 高田 耕治*; 外山 毅*; 仲村 佳悟*

Physical Review Accelerators and Beams (Internet), 19(2), p.021003_1 - 021003_15, 2016/02

 被引用回数:1 パーセンタイル:10.50(Physics, Nuclear)

ビーム位置モニターの周波数特性は、モニターの電極形状に著しく依存する。しかし、モニターの電極形状を直方体から変化させると、その形状に応じて、電極自身を精度よく傾かせ、チェンバーと電極のインピーダンスの整合性を取らないと、電極形状が持つ周波数特性と有為性を維持できない。そこで、まず、セッティングが最も簡単な場合として、電極形状が三角の場合を考え、その周波数特性が、直方体の電極の場合に比べて、著しく改善することを実証した。次に、五角形の形状の電極を考えることで、三角の場合に生じた、低周波側でのオーバーシュートが改善することを実証した。さらに、電極の端を直角に曲げることで、電極形状によらず、周波数特性を改善させることができることを実証した。

論文

Simulation of phase modulation for longitudinal emittance blow-up in J-PARC MR

山本 昌亘; 絵面 栄二*; 原 圭吾*; 長谷川 豪志*; 野村 昌弘; 大森 千広*; Schnase, A.*; 島田 太平; 高木 昭*; 高田 耕治*; et al.

JPS Conference Proceedings (Internet), 8, p.012015_1 - 012015_6, 2015/09

J-PARC MRでは原子核実験ユーザーのために遅い取り出しによってコースティンングビームを供給している。その際、MRフラットトップでのマイクロウェーブ不安定性を抑えるため、縦方向エミッタンスを増大させておかなければならない。我々は、高い周波数の空洞を使って位相変調する方式についてエミッタンスがどのように増大するのかを調べた。適切な位相変調パラメーターを知るために、粒子トラッキングシミュレーションを行った。その結果エミッタンスがきれいに増大する領域では、変調周波数と空洞周波数の間に比例関係があることを発見した。また、エミッタンス増大に必要な時間は、変調をかける時間の平方根に反比例していることも発見した。これらの、位相変調を用いたエミッタンス増大法について、粒子トラッキングシミュレーションの結果を述べる。

論文

Reliability enhancement of seismic risk assessment of NPP as risk management fundamentals, 3; Sensitivity analysis for the quantification of epistemic uncertainty on fragility assessment

西田 明美; 崔 炳賢; 糸井 達哉*; 高田 毅士*; 古屋 治*; 村松 健*

Transactions of the 23rd International Conference on Structural Mechanics in Reactor Technology (SMiRT-23) (USB Flash Drive), 10 Pages, 2015/08

本研究では、原子力施設の地震リスク評価手法の信頼性向上を目的とし、これまでに開発してきた3次元仮想振動台技術を用いたフラジリティ評価における認識論的不確実さの評価に関する検討を実施している。具体的には、対象とする原子力施設建屋の3次元詳細モデルおよび従来モデルを作成し、モデル化のための感度解析として地震応答解析を実施した。本論文では、得られた3次元詳細モデルの結果を従来モデルの結果に対するばらつきとして評価し、認識論的パラメータごとに不確実さ評価を試みた結果について報告する。

論文

Reliability enhancement of seismic risk assessment of NPP as risk management fundamentals, 1; Uncertainty analysis with the SECOM2 code

牟田 仁*; 村松 健*; 古屋 治*; 内山 智曜*; 西田 明美; 高田 毅士*

Transactions of the 23rd International Conference on Structural Mechanics in Reactor Technology (SMiRT-23) (USB Flash Drive), 10 Pages, 2015/08

地震PRAは、基準地震動を超える地震に対するリスクに係る原子力発電所の安全性をさらに確保するための対策と改良を検討するための有効な手段である。しかし、現在までの地震PRAの適用は十分とは言い難い。その理由の一つは、利害関係者の間で意思決定のための評価方法や不確実さ検討に対して十分なコンセンサスが存在しないことにある。本研究では、地震PRAの利用強化と信頼性向上のために、地震による炉心損傷頻度の評価に関連する不確実性を適切に扱うための数学的枠組みや専門的知識を利用したフラジリティ評価方法、認識論的不確実さを扱うための確率モデルを提案する。

論文

Reliability enhancement of seismic risk assessment of NPP as risk management fundamentals, 2; Quantifying epistemic uncertainty in fragility assessment using expert opinions

高田 毅士*; 糸井 達哉*; 西田 明美; 古屋 治*; 村松 健*

Transactions of the 23rd International Conference on Structural Mechanics in Reactor Technology (SMiRT-23) (USB Flash Drive), 10 Pages, 2015/08

原子力施設の耐震安全評価は地震PRAにおける不確実性を識別し定量化することによって行われている。評価プロセスでは、すべての不確実性は、偶然的不確実性と認識論的不確実性のいずれかに分類される。本研究では、建屋や機器のフラジリティに関する認識論的不確実性の系統的な評価が検討され、モデルプラントに対して適用される。本研究では、建物や地盤にかかわる専門家Gと配管や機器の専門家の2つの専門家グループを設置した。関連する十分な感度解析結果をもとに得られた専門家意見は慎重に処理され、いくつかの特定の領域に分類され、そしてそのすべてが将来のフラジリティ評価に利用できるように知識ツリー(KTT)として統合された。

論文

Resonance structures in the impedance of a ceramic break and the measured results

菖蒲田 義博; 外山 毅*; Chin, Y. H.*; 高田 耕治*

Proceedings of 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity, High Brightness and High Power Hadron Beams (HB 2014) (Internet), p.74 - 78, 2015/03

Recently, we have developed a new theory to evaluate longitudinal and transverse impedances of any size of ceramic break sandwiched between metal chambers. The theory successfully reproduces the resonance structures in the impedance due to trapped modes inside the ceramic break. The comparisons between the theoretical and the simulation results such as ABCI and CST Studio show excellent agreements, indicating that they can be used as a good benchmark test for accuracy of simulation codes. To demonstrate the existence of such resonances, the transverse impedance of the ceramic break is measured using the wire-method. The measurement results reproduce the simulations well. The theory is particularly useful for the evaluation of the impedance of the ceramic break with titanium nitride coating.

173 件中 1件目~20件目を表示