JOPSS - Search Results

Journal Articles

Quantitative imaging of trace elements in solid samples by online isotope dilution laser ablation-inductively coupled plasma-mass spectrometry

Yanagisawa, Kayo; Matsueda, Makoto; Furukawa, Makoto*; Ishiniwa, Hiroko*; Wada, Toshihiro*; Hirata, Takafumi*; Takagai, Yoshitaka*

Analyst, 148(18), p.4291 - 4299, 2023/09

https://doi.org/10.1039/D3AN01028G

Times Cited Count：0 Percentile：0.00(Chemistry, Analytical)

Quantitative imaging of trace elements was successfully performed by online isotope dilution laser ablation inductively coupled plasma mass spectrometry (online LA-ICP-IDMS). The sample aerosols produced by LA are mixed online with the mist created from an isotopically enriched spike solution via an in-house cyclonic spray chamber, which has a gas port on the top. Quantification was continuously achieved in each spot; subsequently, quantitative imaging was realized. Fe and Sr were selected as the model elements, and their spot quantifications based on online-isotope dilution. The method was applied to actual biological hard tissues, and the results were compared with electron probe microanalyzer data.

Journal Articles

Rapid separation of zirconium using microvolume anion-exchange cartridge for $^{93}$ Zr determination with isotope dilution ICP-MS

Asai, Shiho; Hanzawa, Yukiko; Konda, Miki; Suzuki, Daisuke; Magara, Masaaki; Kimura, Takaumi; Ishihara, Ryo*; Saito, Kyoichi*; Yamada, Shinsuke*; Hirota, Hideyuki*

Talanta, 185, p.98 - 105, 2018/08

https://doi.org/10.1016/j.talanta.2018.03.026

Times Cited Count：8 Percentile：31.22(Chemistry, Analytical)

Estimating the risks associated with radiation from long-lived fission products (LLFP) in radioactive waste is essential to ensure the long-term safety of potential disposal sites. In this study, the amount of $^{93}$ Zr, a LLFP, was determined by ICP-MS after separating Zr from a spent nuclear fuel solution using a microvolume anion-exchange cartridge (TEDA cartridge). The TEDA cartridge achieved highly selective separation of Zr regardless of its small bed volume of 0.08 cm $^{3}$ . The time taken to complete the Zr separation was 1.2 min with a flow rate of 1.5 mL/min, which was 10 times faster than that for a conventional anion-exchange resin column. Almost all the other elements were removed, leading to accurate measurement of $^{93}$ Zr. The result connects experimental value to theoretical prediction provided by ORIGEN2, which requires verification. With the measured value, we demonstrated that the theoretical value is reliable enough to estimate radiation risks.

JAEA Reports

Preparation of Zr-91 stable isotope standard solution for determination of Zr-93 by mass spectrometry

Konda, Miki; Asai, Shiho; Hanzawa, Yukiko; Magara, Masaaki

JAEA-Technology 2015-054, 22 Pages, 2016/03

JAEA-Technology-2015-054.pdf:3.44MB

Isotope dilution mass spectrometry (IDMS) with ICP-MS is reliable method for determination of Zr-93, which is one of the long-lived fission products found in spent nuclear fuel and high-level radioactive wastes. In order to use an isotope standard solution of zirconium as the spike for IDMS, dissolving a commercially available solid isotope standard is indispensable. Prior to the dissolution of the Zr-91 isotope standard, solubility of metal zirconium in a mixture of HNO and HF was evaluated using zirconium metal chips. Then, 2 mg of the Zr-91 isotope standard was dissolved with 0.2 mL of 1 M HNO-3 v/v% HF mixed solution, followed by adjusting the concentration of Zr-91 to approximately 1,000 g/g. IDMS, in which a natural isotopic abundance standard solution of zirconium was used as the spike, was employed for the determination of the concentration of Zr-91 in the prepared Zr-91 isotope standard solution. The concentration of Zr-91 in the prepared Zr-91 isotope standard solution was (9.61.0) 10 g/g, which is in good agreement with the predicted concentration. This indicates that the Zr-91 metal isotope standard was completely dissolved with sufficient chemical stability. Additionally, no impurities were detected in the prepared Zr-91 isotope standard solution. These positive results denote that the Zr-91 isotope standard solution with the preferable quality for IDMS of Zr-93 can be obtained by the proposed dissolution procedures.