Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Takeda, Nobukazu; Kakudate, Satoshi; Shibanuma, Kiyoshi
Purazuma, Kaku Yugo Gakkai-Shi, 81(4), p.312 - 316, 2005/04
The vibration experiments of the support structures with flexible plates for the ITER major components such as toroidal field coil and vacuum vessel were performed using small-sized flexible plates aiming to obtain its basic mechanical characteristics such as dependence of the stiffness on the loading angle. The experimental results obtained by the hammering and frequency sweep tests were agreed each other, so that the experimental method is found to be reliable. In addition, the experimental results were compared with the analytical ones in order to estimate an adequate analytical model. As a result, the bolt connection strongly affected on the stiffness of the support structure. After studies of modeling the bolts, it is found that the analytical results modeling the bolts with finite stiffness only in the axial direction and infinite stiffness in the other directions agree well with the experimental ones. Using this model, the stiffness of the support structure for the ITER major components can be calculated precisely in order to estimate the dynamic behaviors.
Takeda, Nobukazu; Kakudate, Satoshi; Nakahira, Masataka
JAERI-Tech 2004-072, 43 Pages, 2005/01
The vibration experiments of the support structures with flexible plates for the ITER major components such as the vacuum vessel (VV) and the toroidal field (TF) coil were performed aiming to obtain its basic mechanical characteristics. Based on the experimental results, numerical analysis regarding the actual support structure was performed and a simplified model of the support structure was proposed. A support structure was modeled by only two spring elements. The stiffness calculated by the spring model agrees well with that of shell model, simulating actual structures based on the experimental results. It is therefore found that the spring model with the only two values of stiffness enables to simplify the complicated support structure with flexible plates. Using the spring model, the dynamic analysis of the VV and TF coil were performed to estimate the integrity under the design earthquake. As a result, the maximum relative displacement of 8.6 mm between VV and TF coil is much less than designed clearance, 100 mm, so that the integrity of the components is ensured.
Takeda, Nobukazu; Omori, Junji*; Nakahira, Masataka
JAERI-Tech 2004-068, 27 Pages, 2004/12
ITER vacuum vessel (VV) is a safety component confining radioactive materials such as tritium and activated dust. An independent VV support structure with multiple flexible plates located at the bottom of VV lower port is proposed. This independent concept has two advantages: (1) thermal load due to the temperature deference between VV and the lower temperature components such as TF coil becomes lower and (2) the other components such as TF coil is categorized as a non-safety component because of its independence from VV. Stress analyses have been performed to assess the integrity of the VV support structure using a precisely modeled VV structure. As a result, (1) the maximum displacement of the VV corresponding to the relative displacement between VV and TF coil is found to be 15 mm, much less than the current design value of 100 mm, and (2) the stresses of the whole VV system including VV support are estimated to be less than the allowable ones defined by ASME. Based on these assessments, the feasibility of the proposed independent VV support has been verified as a VV support.
Takeda, Nobukazu; Omori, Junji*; Nakahira, Masataka; Shibanuma, Kiyoshi
Journal of Nuclear Science and Technology, 41(12), p.1280 - 1286, 2004/12
Times Cited Count:3 Percentile:23.45(Nuclear Science & Technology)ITER vacuum vessel (VV) is a safety component confining radioactive materials. An independent VV support structure located at the bottom of VV lower port is proposed as an alternative concept, which is deferent from the current reference, i.e., the VV support is directly connected to the toroidal coil (TF coil). This independent concept has two advantages comparing to the reference one: (1) thermal load becomes lower and (2) the TF coil is categorized as a non-safety component. Stress Analyses have been performed to assess the integrity of the VV support structure. As a result, (1) the maximum displacement of the VV corresponding to the relative displacement between VV and TF coil is found to be 15 mm, much less than the current design value of 100 mm, and (2) the stresses of the whole VV system including VV support are estimated to be less than the allowable ones defined by ASME, respectively. Based on these assessments, the feasibility of the proposed independent VV support has been verified as an alternative VV support.
Takeda, Nobukazu; Omori, Junji*; Nakahira, Masataka; Shibanuma, Kiyoshi
Journal of Nuclear Science and Technology, 41(12), p.1280 - 1286, 2004/12
The vibration experiments of the support structures with flexible plates for the ITER major components such as toroidal field coil and vacuum vessel were performed using small-sized flexible plates aiming to obtain its basic mechanical characteristics such as dependence of the stiffness on the loading angle. The experimental results obtained by the hammering and frequency sweep tests were agreed each other, so that the experimental method is found to be reliable. In addition, the experimental results were compared with the analytical ones in order to estimate an adequate analytical model. As a result, the bolt connection strongly affected on the stiffness of the support structure. After studies of modeling the bolts, it is found that the analytical results modeling the bolts with finite stiffness only in the axial direction and infinite stiffness in the other directions agree well with the experimental ones. Using this model, the stiffness of the support structure for the ITER major components can be calculated precisely in order to estimate the dynamic behaviors.
Takeda, Nobukazu; Shibanuma, Kiyoshi
Purazuma, Kaku Yugo Gakkai-Shi, 80(11), p.988 - 990, 2004/11
The simplified analytical model of the support structure composed of complicated structures such as multiple flexible plates was proposed for the dynamic analysis of the ITER major components of VV and TF coil. The support structure composed of flexible plates and connection bolts was modeled as a spring model composed of only two spring elements including the effect of connection bolts. The stiffness of both spring models for VV and TF coil agree well with that of shell models simulating actual structures such as flexible plates and connection bolts. Using the proposed model, the dynamic analysis of the VV and TF coil for the ITER were performed to estimate the integrity under the design earthquake at Rokkasho, a candidate of ITER site. As a result, it is found that the maximum relative displacement of 8.6 mm between VV and TF coil is much less than 100 mm, so that the integrity of the major components are ensured for the expected earthquake event.