Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
杉田 裕; 大野 宏和; Beese, S.*; Pan, P.*; Kim, M.*; Lee, C.*; Jove-Colon, C.*; Lopez, C. M.*; Liang, S.-Y.*
Geomechanics for Energy and the Environment, 42, p.100668_1 - 100668_21, 2025/06
被引用回数:1 パーセンタイル:0.00(Energy & Fuels)国際共同プロジェクトDECOVALEX-2023は、数値解析を使用してベントナイト系人工バリアの熱-水-応力(または熱-水)相互作用を研究するためのタスクDとして、幌延人工バリア性能確認試験を対象とした。このタスクは、モデル化のために、1つの実物大の原位置試験と、補完的な4つの室内試験が選択された。幌延人工バリア性能確認試験は、人工的な地下水注入と組み合わせた温度制御非等温の試験であり、加熱フェーズと冷却フェーズで構成されている。6つの研究チームが、さまざまなコンピューターコード、定式化、構成法則を使用して、熱-水-応力または熱-水(研究チームのアプローチによって異なる)数値解析を実行した。
Joung, S.*; Ji, Y.-Y.*; Choi, Y.*; Lee, E.*; Ji, W.*; 佐々木 美雪; 越智 康太郎; 眞田 幸尚
Journal of Instrumentation (Internet), 20(4), p.P04027_1 - P04027_10, 2025/04
被引用回数:0 パーセンタイル:0.00(Instruments & Instrumentation)An airborne survey system named the MARK-A1 was previously developed to be mounted on an unmanned aerial vehicle for the purpose of application in contaminated areas with high dose rate levels. The MARK-A1 system consists of a CZT detector, signal processing unit, and positioning and interface units linked to a PC on the ground. The weight of the system is below 1 kg for loading on a commercial drone. In the current work, for experimental verification, field testing was conducted in a high dose rate environment near the Fukushima Daiichi Nuclear Power Plant. With the cooperation of the Japan Atomic Energy Agency, the MARK-A1 was installed on an unmanned aerial vehicle to conduct airborne surveys using two flight methods, namely a flat flight and a step flight, at various speeds. The airborne survey data were converted to gamma dose rates at a height of 1 m above the ground using a flat source model to create contamination maps. For a comparative evaluation of the airborne survey results, an in situ survey was also conducted in the survey area, and it was confirmed that the step flight method better matched the surface survey results.
Thennakoon, A.*; 横倉 涼雅*; Yang, Y.*; 梶本 亮一; 中村 充孝; 林 真弘*; 道岡 千城*; Chern, G.-W.*; Broholm, C.*; 植田 浩明*; et al.
Nature Communications (Internet), 16, p.3939_1 - 3939_13, 2025/04
被引用回数:0 パーセンタイル:0.00(Multidisciplinary Sciences)The pursuit of quantum spin liquid (QSL) states in condensed matter physics has drawn attention to kagome antiferromagnets (AFM) where a two-dimensional corner-sharing network of triangles frustrates conventional magnetic orders. While quantum kagome AFMs based on Cu (
,
) ions have been extensively studied, there is so far little work beyond copper-based systems. Here we present our bulk magnetization, specific heat and neutron scattering studies on single crystals of a new titanium fluorides Cs
RbK
Ti
F
where Ti
(
,
) ions form a modulated quantum kagome antiferromagnet that does not order magnetically down to 1.5 K. Our comprehensive map of the dynamic response function
acquired at 1.5 K where the heat capacity is
-linear reveals a dispersive continuum emanating from soft lines that extend along (100). The data indicate fractionalized spinon-like excitations with quasi-one-dimensional dispersion within a quasi two-dimensional spin system.
Brumm, S.*; Gabrielli, F.*; Sanchez Espinoza, V.*; Stakhanova, A.*; Groudev, P.*; Petrova, P.*; Vryashkova, P.*; Ou, P.*; Zhang, W.*; Malkhasyan, A.*; et al.
Annals of Nuclear Energy, 211, p.110962_1 - 110962_16, 2025/02
被引用回数:6 パーセンタイル:94.85(Nuclear Science & Technology)The completed Horizon-2020 project on "Management and Uncertainties of Severe Accidents (MUSA)" has reviewed uncertainty sources and Uncertainty Quantification methodology for the purpose of assessing Severe Accidents (SA). The key motivation of the project has been to bring the advantages of the Best Estimate Plus Uncertainty approach to the field of Severe Accident. The applications brought together a large group of participants that set out to apply uncertainty analysis (UA) within their field of SA modelling expertise, in particular reactor types, but also SA code used (ASTEC, MELCOR, etc.), uncertainty quantification tools used (DAKOTA, RAVEN, etc.), detailed accident scenarios, and in some cases SAM actions. This paper synthesizes the reactor-application work at the end of the project. Analyses of 23 partners are sorted into different categories, depending on whether their main goal is/are (i) uncertainty bands of simulation results; (ii) the understanding of dominating uncertainties in specific sub-models of the SA code; (iii) improving the understanding of specific accident scenarios, with or without the application of SAM actions; or, (iv) a demonstration of the tools used and developed, and of the capability to carry out an uncertainty analysis in the presence of the challenges faced. The partners' experiences made during the project have been evaluated and are presented as good practice recommendations. The paper ends with conclusions on the level of readiness of UA in SA modelling, on the determination of governing uncertainties, and on the analysis of SAM actions.
Song, Y.*; Xu, S.*; 佐藤 駿介*; Lee, I.*; Xu, X.*; 大森 俊洋*; 長迫 実*; 川崎 卓郎; 鬼柳 亮嗣; Harjo, S.; et al.
Nature, 638, p.965 - 971, 2025/02
被引用回数:5 パーセンタイル:94.96(Multidisciplinary Sciences)In advanced applications like aerospace and space exploration, materials must balance lightness, functionality, and extreme thermal fluctuation resistance. Shape-memory alloys show promise with strength, toughness, and substantial strain recovery due to superelasticity, but maintaining low mass and effective operation at cryogenic temperatures is challenging. We hereby introduce a novel shape-memory alloy that adheres to these stringent criteria. Predominantly composed of Ti and Al with a chemical composition of TiAl
Cr
, this alloy 25 is characterized by a low density (4.36
10
kg/m
) and a high specific strength (185
10
Pa
m
/kg) at room temperature, while exhibiting excellent superelasticity. The superelasticity, owing to a reversible stress-induced phase transformation from an ordered body-centered cubic parent phase to an ordered orthorhombic martensite, allows for a recoverable strain exceeding 7%. Remarkably, this functionality persists across a broad range of temperatures, from deep cryogenic 4.2 K to above room temperature, arising from an unconventional temperature dependence of transformation stresses. Below a certain threshold during cooling, the critical transformation stress inversely correlates with temperature. We interpret this behavior from the perspective of a temperature-dependent anomalous lattice instability of the parent phase. This alloy holds potential in everyday appliances requiring flexible strain accommodations, as well as components designed for extreme environmental conditions such as deep space and liquefied gases.
勅使河原 誠; Lee, Y.*; 達本 衡輝*; Hartl, M.*; 麻生 智一; Iverson, E. B.*; 有吉 玄; 池田 裕二郎*; 長谷川 巧*
Nuclear Instruments and Methods in Physics Research B, 557, p.165534_1 - 165534_10, 2024/12
被引用回数:1 パーセンタイル:0.00(Instruments & Instrumentation)J-PARCの核破砕中性子源において、水酸化第二鉄触媒の機能性を評価するため、1MW運転時の積算ビーム出力9.4MWhの条件で、ラマン分光法を用いてパラ水素割合をその場測定した。その結果、1MW運転におけて触媒が十分に機能していることが分かった。また、触媒を通さないバイパスラインを用いて、中性子照射によるパラからオルソ水素への逆変換率を調べることを試みた。測定されたオルソ水素割合の増加は、500kW運転で積算ビーム出力2.4MW
hの場合に0.44%であった。しかしながら、この結果は、冷中性子モデレータ内で引き起こされた逆変換と、バイパスされた触媒容器中の温度上昇によって発生した準静的オルソ水素のメインループへの受動的滲出との合算であることが示された。
Lam, T.-N.*; Chin, H.-H.*; Zhang, X.*; Feng, R.*; Wang, H.*; Chiang, C.-Y.*; Lee, S. Y.*; 川崎 卓郎; Harjo, S.; Liaw, P. K.*; et al.
Acta Materialia, 245, p.118585_1 - 118585_9, 2023/02
被引用回数:26 パーセンタイル:88.94(Materials Science, Multidisciplinary)The present study investigates the crystallographic-texture effects on the improved fatigue resistance in the CoCrFeMnNi high-entropy alloys (HEAs) with the full-size geometry of the ASTM Standards E647-99. We exploited X-ray nano-diffraction mapping to characterize the crystal-deformation levels ahead of the crack tip after stress unloading under both constant- and tensile overloaded-fatigue conditions. The crack-tip blunting-induced much higher deformation level was concentrated surrounding the crack-tip which delays the fatigue-crack growth immediately after a tensile overload. The predominant deformation texture orientation in the Paris regime was investigated, using electron backscatter diffraction and orientation distribution function analyses. The twinning formation-driven shear deformation gave rise to the development of the Goss-type texture within the plastic deformation regime under a tensile-overloaded-fatigue condition, which was attributed to enhance the crack deflection and thus the tensile induced crack-growth-retardation period in the CoCrFeMnNi HEA.
Brumm, S.*; Gabrielli, F.*; Sanchez-Espinoza, V.*; Groudev, P.*; Ou, P.*; Zhang, W.*; Malkhasyan, A.*; Bocanegra, R.*; Herranz, L. E.*; Berda, M.*; et al.
Proceedings of 10th European Review Meeting on Severe Accident Research (ERMSAR 2022) (Internet), 13 Pages, 2022/05
The current HORIZON-2020 project on "Management and Uncertainties of Severe Accidents (MUSA)" aims at applying Uncertainty Quantification (UQ) in the modeling of Severe Accidents (SA), particularly in predicting the radiological source term of mitigated and unmitigated accident scenarios. Within its application part, the project is devoted to the uncertainty quantification of different severe accident codes when predicting the radiological source term of selected severe accident sequences of different nuclear power plant designs, e.g. PWR, VVER, and BWR. Key steps for this investigation are, (a) the selection of severe accident sequences for each reactor design, (b) the development of a reference input model for the specific design and SA-code, (c) the selection of a list of uncertain model parameters to be investigated, (d) the choice of an UQ-tool e.g. DAKOTA, SUSA, URANIE, etc., (e) the definition of the figures of merit for the UA-analysis, (f) the performance of the simulations with the SA-codes, and, (g) the statistical evaluation of the results using the capabilities, i.e. methods and tools offered by the UQ-tools. This paper describes the project status of the UQ of different SA codes for the selected SA sequences, and the technical challenges and lessons learnt from the preparatory and exploratory investigations performed.
Marchetto, C.*; Ha, K. S*; Herranz, L. E.*; 廣瀬 意育; Jankowski, T.*; Lee, Y.*; Nowack, H.*; Pellegrini, M.*; Sun, X.*
Proceedings of 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19) (Internet), 17 Pages, 2022/03
After the Fukushima Daiichi accident of March 2011, one of the main concerns of the nuclear industry has been the research works for improving atmospheric radioactive release mitigation systems. Pool scrubbing is an important process in reactors that mitigates radioactive release. It is based on the injection of gases containing fission products through a water pool. Bubble hydrodynamics, as a result of gas injection and the associated water pool thermal-hydraulics, is an important aspect of the process since the bubble size, shape, velocity, etc. influence the fission product trapping at the bubble interface with the water. Computer codes dedicated to the pool scrubbing have been mainly developed in the 90's last century and modelling drawbacks have been identified in particular for bubble hydrodynamics. One of IPRESCA project objectives is to improve the pool scrubbing modelling. In order to highlight the main modelling issues, a benchmark exercise has been performed focusing on the bubble hydrodynamics. This benchmark, performed by nine organisations coming from six countries, aims at simulating a basic configuration, a single upward injector in ambient conditions, experimentally characterized in the RSE tests carried out in the European PASSAM project. In this paper, a short description of the code modelling and a comparison between the code results and the experimental data are presented and discussed. Then, outcomes from the benchmark result analysis and proposals of improvements are emphasized.
Lee, M.-S.*; 川崎 卓郎; 山下 享介*; Harjo, S.; Hyun, Y.-T.*; Jeong, Y.*; Jun, T.-S.*
Scientific Reports (Internet), 12(1), p.3719_1 - 3719_10, 2022/03
被引用回数:16 パーセンタイル:71.60(Multidisciplinary Sciences)Titanium has a significant potential for the cryogenic industrial fields such as aerospace and liquefied gas storage and transportation due to its excellent low temperature properties. To develop and advance the technologies in cryogenic industries, it is required to fully understand the underlying deformation mechanisms of Ti under the extreme cryogenic environment. Here, we report a study of the lattice behaviour in grain families of Grade 2 CP-Ti during in-situ neutron diffraction test in tension at temperatures of 15-298 K. Combined with the neutron diffraction intensity analysis, EBSD measurements revealed that the twinning activity was more active at lower temperature, and the behaviour was complicated with decreasing temperature.
Kim, Y. S.*; Chae, H.*; Woo, W.*; Kim, D.-K.*; Lee, D.-H.*; Harjo, S.; 川崎 卓郎; Lee, S. Y.*
Materials Science & Engineering A, 828, p.142059_1 - 142059_10, 2021/11
被引用回数:33 パーセンタイル:88.56(Nanoscience & Nanotechnology)CoCrNi medium entropy alloy (MEA) and stainless steel 316L (SS316L) were manufactured by direct energy deposition of additive manufacturing (DED-AM). Exceptional mechanical properties of DED CoCrNi at 210K were achieved by the activities of a multiple deformation scheme that changed from dislocation slip to twinning-induced plasticity followed by transformation-induced plasticity. While SS316L at room temperature has micro-twins, CoCrNi at 210K exhibited nano-twins, resulting from lower stacking fault energy. Moreover, transformed hexagonal close-packed (HCP) phases were found near the face-centered cubic (FCC) {111} grain boundaries, where remarkable stacking faults and severe lattice distortion were measured.
Kwon, H.*; Pietrasiak, E.*; 大原 高志; 中尾 朗子*; Chae, B.*; Hwang, C.-C.*; Jung, D.*; Hwang, I.-C.*; Ko, Y. H.*; Kim, K.*; et al.
Inorganic Chemistry, 60(9), p.6403 - 6409, 2021/05
被引用回数:0 パーセンタイル:0.00(Chemistry, Inorganic & Nuclear)The synthesis of sandwich-shaped multinuclear silver complexes with planar penta- and tetranuclear wheel-shaped silver units and a central anion is reported, along with complete spectroscopic and structural characterization. An NMR mechanistic study reveals that silver complexes were formed in the following order: 2Ag 3Ag
5Ag
4Ag
. The central hydroxides in 4Ag
and 5Ag
exhibit exotic physical properties due to the confined environment inside the complex. The size of these silver wheels can be tuned by changing the central anion or extracting/adding one silver atom. This study provides the facile way to synthesize discrete wheel-shaped multinuclear silver complexes and provides valuable insights into the dynamics of the self-assembly process.
Miao, P.*; Tan, Z.*; Lee, S. H.*; 石川 喜久*; 鳥居 周輝*; 米村 雅雄*; 幸田 章宏*; 小松 一生*; 町田 真一*; 佐野 亜沙美; et al.
Physical Review B, 103(9), p.094302_1 - 094302_18, 2021/03
被引用回数:5 パーセンタイル:23.69(Materials Science, Multidisciplinary)層状ペロブスカイトPrBaCoO
は、熱膨張のない複合材料を作るために必要な負の熱膨張(NTE)を示す。NTEは、自発的な磁気秩序と密接に関連していることがわかっていた(磁気体積効果: MVE)。今回、われわれは、PrBaCo
O
の連続的な磁気体積効果が、本質的には不連続であり、大きな体積を持つ反強磁性絶縁体(AFILV)から、小さな体積をもつ強磁性卑絶縁体(FLISV)への磁気電気的相転移に起因することを明らかにした。また、磁気電気効果(ME)は、温度,キャリアドーピング,静水圧,磁場などの複数の外部刺激に対して高い感度を示した。これは、これまでよく知られている対称性の破れを伴う巨大磁気抵抗やマルチフェロイック効果などのMEとは対照的であり、輝コバルト鉱のMEは同一の結晶構造で起こる。われわれの発見は、MEとNTEを実現するための新しい方法を示しており、それは新しい技術に応用されるかもしれない。
Herranz, L. E.*; Jacquemain, D.*; Nitheanandan, T.*; Sandberg, N.*; Barr, F.*; Bechta, S.*; Choi, K.-Y.*; D'Auria, F.*; Lee, R.*; 中村 秀夫
Progress in Nuclear Energy, 127, p.103432_1 - 103432_14, 2020/09
被引用回数:6 パーセンタイル:21.52(Nuclear Science & Technology)WGAMA started on Dec. 31st 1999 to assess and strengthen the technical basis needed for the prevention, mitigation and management of potential accidents in NPP and to facilitate international convergence on safety issues and AM analyses and strategies. WGAMA addresses reactor thermal-hydraulics (Thys), in-vessel behavior of degraded cores, containment behavior and protection, and FP release, transport, deposition and retention, for both current and advanced reactors. This paper summarizes such WGAMA contributions in Thys, CFD and severe accidents, which include the Fukushima-Daiichi accident impacts on the WGAMA activities and their substantial outcomes. Around 50 technical reports have become reference in the related fields, which appear in References. Recommendations in these reports include further research, some of which have given rise to the joint projects conducted or underway within the OECD framework. Ongoing WGAMA activities are numerous and a number of them are to be launched in the near future, which are shortly mentioned too.
Lee, W.-Y.*; Park, N.-W.*; Kang, M.-S.*; Kim, G.-S.*; Jang, H. W.*; 齊藤 英治; Lee, S.-K.*
Journal of Physical Chemistry Letters (Internet), 11(13), p.5338 - 5344, 2020/07
被引用回数:12 パーセンタイル:56.59(Chemistry, Physical)The voltage induced by the inverse spin Hall effect (ISHE) is affected by several factors, including the spin Hall angle of the normal metal (NM), the quality and magnetic properties of the ferromagnetic material (FM), and the interface conditions between the NM and FM bilayers in longitudinal spin Seebeck effect (LSSE) measurement. Specifically, the interface conditions in NM/FM systems via LSSE devices play a crucial role in determining the efficiency of spin current injection into the NM layer. In this letter, we report a new approach to controlling the efficiency of spin current injection into a Pt layer across a Pt/YFe
O
(YIG) interface by surface coverage of the intermediate layer. A continuous, large-area multilayer molybdenum dichalcogenide (MoS
) thin film grown by chemical vapor deposition is inserted between the Pt and YIG layers in the LSSE configuration. We found that, when the large-area multilayer MoS
film was present, the measured ISHE-induced voltage and theoretically calculated spin current in the Pt/MoS
/YIG trilayer increased by
510% and 470%, respectively, compared to those of a Pt/YIG bilayer. The induced voltage and spin current were very sensitive to the surface conductance, which was affected by the surface coverage of the multilayer MoS
films in the LSSE measurement. Furthermore, the theoretically calculated spin current and spin mixing conductance in the trilayer geometry are in qualitatively good agreement with the experimental observations. These measurements enable us to explain the effect of the interface conditions on the spin Seebeck effect in spin transport.
永野 博彦; Kim, Y.*; Lee, B.-Y.*; 重田 遥*; 犬伏 和之*
Soil Science and Plant Nutrition, 64(6), p.793 - 802, 2018/12
被引用回数:5 パーセンタイル:22.47(Plant Sciences)北半球の高緯度生態系における年間温室効果ガス(GHG)収支を決定する重要なプロセスである凍結土壌の融解中に起きる炭素動態の変化を調べるために、本研究では、内陸アラスカのクロトウヒ林から採取した凍結土壌コアの培養実験を行った。地表面から永久凍土がある深さ90cmまでのコアを、3層(表層,中間層,下層)に分けた。次いで、各層から分取した12土壌(1層につき4土壌)を3週間培養し、二酸化炭素(CO)およびメタン(CH
)フラックスを測定した。培養中、温度を0から10
Cまで1週間ずつ変化させた。表層および中間層の8土壌のうち6土壌では、CO
放出量が0
Cよりも5
Cで1.5-19.2倍大きかったが、これら6土壌のうち3土壌のCO
放出は、10
Cでの培養で減少した。CH
放出は、0
Cで培養した下層土壌で最大であった。0
Cで培養した表層および中間層の土壌でも、CH
放出が観察された。5および10
Cでは、下層土壌のCH
放出が減少し、表層および中間層の土壌はCH
吸収を示した。嫌気的CH
酸化および生成の阻害物質(2-bromoethane sulfonate)を添加すると、CH
吸収と放出の両方が減少した。細菌および古細菌群集のゲノム情報は土壌の深さとともに変化したが、融解に対しては安定であった。以上より、北方のクロトウヒ林における土壌のGHGフラックスは土壌融解に敏感かつ多様に反応する一方、細菌および古細菌の全体的な群集構造は融解に対して安定的であることが判明した。
Wu, P.*; Zhang, B.*; Peng, K. L.*; 萩原 雅之*; 石川 喜久*; 古府 麻衣子; Lee, S. H.*; 組頭 広志*; Hu, C. S.*; Qi, Z. M.*; et al.
Physical Review B, 98(9), p.094305_1 - 094305_7, 2018/09
被引用回数:13 パーセンタイル:49.03(Materials Science, Multidisciplinary)熱電材料であるNaドープしたSnSeについて、ARPES, 中性子回折, 中性子非弾性散乱でその電子構造と格子ダイナミクスを測定した結果を報告する。
Han, M. C.*; Yeom, Y. S.*; Lee, H. S.*; Shin, B.*; Kim, C. H.*; 古田 琢哉
Physics in Medicine & Biology, 63(9), p.09NT02_1 - 09NT02_9, 2018/05
被引用回数:11 パーセンタイル:49.11(Engineering, Biomedical)輸送計算コードGeant4, MCNP6, PHITSのマルチスレッド並列計算の実行性能について、異なる複雑さを持つ三体の四面体メッシュファントムを用いて調査した。ここでは、光子と中性子の輸送計算を実行し、初期化にかかる時間、輸送計算の時間及び、メモリ使用量と並列スレッド数の増加に対する相関関係を評価した。初期化にかかる時間は、ファントムの複雑化に伴い増加するものの、並列スレッド数にはあまり依存しないという傾向が三つ全ての計算コードで見られた。輸送計算の時間については、マルチスレッド並列計算に独立タリーの設計を採用しているGeant4では高い並列化効率(40並列で30倍の高速化)が見られたのに対し、MCNP6及びPHITSではタリー共有化による遅延のために、並列スレッド数増加に対する高速化の頭落ちが見られた(40並列でもMCNPは10倍、PHITSは数倍の高速化)。その一方で、Geant4は計算に必要なメモリ容量が大きく、並列スレッド数増加に対するメモリ使用量の増加もMCNP6やPHITSに比べて大きいことが分かった。また、PHITSの特筆すべき点として、メモリ使用量はファントムの複雑さやスレッド数によらず、他の二つの計算コードに比べて、顕著に小さいことも分かった。
Bierwage, A.; Yun, G. S.*; Choe, G. H.*; Nam, Y.*; Lee, W.*; Park, H. K.*; Bae, Y.-S.*
Nuclear Fusion, 55(1), p.013016_1 - 013016_17, 2015/01
被引用回数:4 パーセンタイル:16.99(Physics, Fluids & Plasmas)The dynamics of multiple flux tubes in the core of a sawtoothing tokamak plasma are studied numerically. This is motivated by observations of long-lived hot spots in the ECE images of KSTAR plasmas with ECH. Using a empirical source term in a reduced set of MHD equations, it is shown that flux tubes with helicity h=1 are easily produced and survive for the observed time intervals only if the safety factor q is close to unity and the magnetic shear is small. It is shown that under these conditions the spatial localization of ECH may allow it to actively induce the formation of the tubes. Using simulations, we examine how the flux tubes merge and annihilate, and how their dynamics depend on the strength of the drive. We conclude that flux tubes play an important role for the dynamic competition between sources and sinks of thermal and magnetic energy during the sawtooth ramp phase. The development of self-consistent simulation models is motivated and directions for experiments are given.
川久保 陽子; Hoffheins, B.; 井上 尚子; Mongiello, R.*; Baldwin, G.*; Lee, N. Y.*
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Safe Technologies and Sustainable Scenarios (FR-13) (USB Flash Drive), 8 Pages, 2013/03
原子力の透明性は、国際原子力機関(IAEA)保障措置を補強し、国際的・地域的な信頼醸成に寄与するという点で重要である。そして、信頼醸成の主要な要素である情報共有は、高速炉及び核燃料サイクルの開発の分野においても、透明性を向上させ、専門家間相互理解を促進するために必要である。原子力機構は、アジア太平洋地域における原子力の透明性向上を目的とした情報共有フレームワークを設計、構築のプロジェクトを実施している。本プロジェクトは、サンディア国立研究所(SNL),韓国核不拡散核物質管理院(KINAC),韓国原子力研究所(KAERI)と共同で行っており、現在は情報共有フレームワークの要件の合意に向けて議論を行っている。本稿は情報共有フレームワークの要件開発の現状について記すものである。この要件開発は現在も進行中であるが、近い将来プロジェクト関係機関の間で合意し、デモンストレーションを行う予定である。