Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Fei, Y.*; Wang, Y.*; Zhang, J.*; Liu, J.*; Zhao, Z.*; 服部 高典; 阿部 淳*; Dong, X.*; Mao, H.-K.*; Zheng, H.*; et al.
Chemistry; A European Journal, 32(31), p.e71096_1 - e71096_11, 2026/08
被引用回数:0 パーセンタイル:0.00(Chemistry, Multidisciplinary)カーボンナノスレッド(CNThs)は、卓越した機械的特性を備えた一次元飽和炭素ナノ材料である。多環芳香族炭化水素(PAHs)は、高圧下において、機械的性能が向上した、より太い多環状CNThsを形成すると期待されている。本研究では、最も単純なPAHであるナフタレンの高圧重合について、複数の最先端手法を用いて体系的に調査した。ナフタレン分子はヘリンボーン状に積層し、20GPa以上ではa-b方向に沿って[4+2]環化付加反応を起こし、一次元CNThを生成した。多くのCNThの形成とは対照的に、CNThの核生成は加圧中に起こりその成長は減圧中に進行するが、これはヘリンボーン状に積層した芳香族化合物に普遍的に見られる現象であると考えられる。得られたCNTh結晶の単位格子が決定され、生成物であるCNThの可能な構造も提案された。本研究は、高圧下におけるナフタレンの重合特性を明らかにし、滑り角が重合経路を決定する上で重要な役割を果たすことを示している。
telier effect in an Al-Mg-Zn-based crossover aluminum alloyZhang, X.*; Li, Y.*; Wei, S.*; Guo, H.*; He, Z.*; Yang, C.*; Gong, W.; Harjo, S.; Zhou, D.*; Li, Z.*; et al.
Acta Materialia, 308, p.121990_1 - 121990_18, 2026/04
被引用回数:8 パーセンタイル:99.16(Materials Science, Multidisciplinary)Dynamic strain aging (DSA) causes serrated flow, known as the Portevin-Le Ch
telier (PLC) effect, through interactions between solute atoms and dislocations. In this study, tensile tests on an Al-Mg-Zn crossover solid-solution alloy revealed that DSA and strain-induced dynamic precipitation jointly control serration behavior. At low strain rates, DSA-assisted precipitation produced Type C serrations, whereas high strain rates suppressed precipitation and promoted Type A serrations. High-energy X-ray diffraction and TEM analyses showed that screw dislocations dominated early deformation and governed plastic flow localization through cross-slip. Frequent cross-slip at high strain rates generated dislocation microbands responsible for Type A serrations, highlighting the primary role of screw dislocations rather than edge dislocations. A constitutive model incorporating DSA-assisted strengthening successfully predicted flow behavior over a wide strain-rate range.
Bk and
AmWang, J. G.*; Zhang, Z. Y.*; Andreyev, A. N.; 他33名*
Physics Letters B, 875, p.140365_1 - 140365_6, 2026/04
被引用回数:2 パーセンタイル:81.50(Astronomy & Astrophysics)ガス充填反跳分離器SHANS2を用いて、新同位体
Bkと
Amを調査した。これらの同位体は、
Au(
Ar,2n)
Bk反応によって合成された
Bkの放射性崩壊系列の測定により同定された。またこれらの同位体の
線エネルギーと半減期が決定された。系統的な解析により、BkとAmの同位体に関する実験データと理論予測との間に大きな不一致があることが明らかになり、更なる調査の必要性が示唆された。
Zn
Mo
O
Bao, S.*; Liao, J.*; Huang, Z.*; Shangguan, Y.*; Ma, Z.*; Zhang, B.*; Cheng, S.*; Xu, H.*; Song, Z.*; Dong, S.*; et al.
Physical Review Letters, 136(9), p.096502_1 - 096502_8, 2026/03
被引用回数:3 パーセンタイル:96.14(Physics, Multidisciplinary)Lattice vibrations can carry angular momentum and magnetic moments under broken inversion or time-reversal symmetry, forming so-called chiral phonons. While such excitations have been explored in nonmagnetic systems via optical probes, their direct detection in magnetic materials and coupling to spin excitations remain largely unexplored. Here, using neutron spectroscopy, sensitive to both nuclear and magnetic scattering, we reveal the magnetic signature of chiral phonons in ferrimagnetic Fe
Zn
Mo
O
with Curie temperature
K. Below
, we observe enhanced magnetic scattering of phonons at small momenta, arising from strong magnon-phonon coupling. In addition, out-of-plane intensity modulation, phonon mode splitting, and field-induced Zeeman shifts are observed, all closely associated with the ferrimagnetic order. These features vanish above
, where phonon spectra are dominated by nuclear scattering. These observations demonstrate the existence of chiral phonons carrying substantial magnetic moments that directly contribute to magnetic scattering, and establish neutron spectroscopy as a powerful, momentum-resolved probe of their magnetic character.
O
Gao, B.*; Chen, T.*; Liu, C.*; Klemm, M. L.*; Zhang, S.*; Ma, Z.*; Xu, X.*; Won, C.*; McCandless, G. T.*; Rao, K.*; et al.
Science Advances (Internet), 12(10), p.eaed7778_1 - eaed7778_7, 2026/03
被引用回数:2 パーセンタイル:76.89(Multidisciplinary Sciences)In the search for unconventional magnetism, exotic quantum states are characterized by a lack of order and a broad spin excitation continuum approaching zero temperature. We study the two-dimensional triangular-lattice effective spin-system CeMgAl
O
, which shows slight disorder but no magnetic ordering down to 100 millikelvin. Spin-wave analysis in the magnetic-field-polarized state determines the spin Hamiltonian featuring a mixed ferromagnetic-antiferromagnetic nearest-neighbor exchange interaction. This places the system near an exactly solvable point of the spin-triangular-lattice XXZ model with extensive ground-state degeneracy. In zero field, neutron spectroscopy reveals a prominent continuum; we show that this arises from an ensemble average of spin-wave spectra across the degenerate ground-state manifold. This demonstrates that the role of weak quenched disorder can be quantitatively constrained: It inhibits unique ground-state selection and stabilizes a local distribution within the degenerate manifold, yielding continuum-like spectra that necessitate a critical reevaluation of the experimental signatures of exotic quantum states.
RhZhang, J. Z.*; Chen, Z. Q.*; Qu, T.*; Wang, Y. K.*; Li, Z. H.*; Orlandi, R.; 他62名*
Physics Letters B, 873, p.140144_1 - 140144_9, 2026/02
被引用回数:0 パーセンタイル:0.00(Astronomy & Astrophysics)At the RIKEN,
-delayed
-ray spectroscopy studies were conducted on
Rh and
Rh, resulting in the world's first successful identification of a 1/2
isomer in these isotope, extending the energy difference between the 9/2
and 1/2
states up to neutron number
=74. Comparison of the new results with state-of-the-art calculations suggests that triaxial deformation plays a significant role in the evolution of the energy difference, indicating a shape transition from axially symmetric to triaxial deformation within the Rh isotopic series. These findings provide new insights into the structure of neutron-rich nuclei in the atomic number
region, elucidating the interplay between triaxial deformation and shell evolution.
Qin, T. Y.*; Hu, F. F.*; 徐 平光; Zhang, R.*; Su, Y. H.; Ao, N.*; Li, Z. W.*; 篠原 武尚; 菖蒲 敬久; Wu, S. C.*
International Journal of Fatigue, 202, p.109233_1 - 109233_16, 2026/01
被引用回数:7 パーセンタイル:69.50(Engineering, Mechanical)The surface induction-hardened S38C medium carbon steel shows a good balance of strength and toughness, but complicates the evaluation of fatigue resistance, mainly because of gradient residual stress (RS) and grains. An integrated fatigue resistance assessment (AIFA) framework was proposed to consider the residual stress relief under stochastic loads. To this end, quasi-in situ neutron diffraction and Bragg-edge imaging were combined to probe the evolution of residual stress during crack propagation. Firstly, a rigid-flexible coupled vehicle dynamics model was adopted to obtain the time-domain variable amplitude loading spectrum. Then, Fortran subroutines were developed to assign these data into full-scale S38C axle model, and the remaining life was predicted using the damage tolerance approach. The results demonstrate that crack propagation would accelerate when residual stress is considered in the case of the crack depth exceeding 3.0 mm. It is, for the first time, found that 15 mm- and 5 mm-thickness fan-shaped specimens can retain the axial and hoop residual strain in terms of diffraction angle variation, respectively, for full-scale structural S38C steel axles. In the absence of RS, the remaining life of the axle decreases sharply from 624,800 to 51,300 km as the crack depth increases from 3.0 to 16 mm. Compared with the standard method under constant amplitude loading without residual stress relief, the present AIFA method provides the more accurate but conservative fatigue life prediction.
and L1
phase in deformation behaviors of additively manufactured FeCrNiAlTi alloyWang, X.*; Wang, Y.*; Gong, W.; Wu, W.*; Zhang, Y.*; Harjo, S.; Yang, Z.*; Chen, H.*
International Journal of Plasticity, 195, p.104502_1 - 104502_16, 2025/12
被引用回数:12 パーセンタイル:92.14(Engineering, Mechanical)Precipitation hardening strengthens FCC alloys but often reduces ductility. This study shows that precipitates can also modify deformation behavior to mitigate this trade-off. An FeCrNiAlTi FCC alloy fabricated by laser additive manufacturing contains incoherent L2
precipitates at cell walls and coherent L1
precipitates within cells. By controlling precipitation, an excellent strength-ductility balance was achieved at both ambient and cryogenic temperatures. High-density precipitates provide strengthening while promoting deformation-induced stacking faults and twinning, thereby enhancing work hardening via strain heterogeneity. In situ neutron diffraction indicates that post-yield lattice strain governs stacking fault and twin formation. Simulations show that interfacial misfit of the L2
phase and the size and spacing of the L1
phase amplify local strain.
Zhao, X.*; Zhang, Z.*; 服部 高典; Wang, J.*; Li, L.*; Jia, Y.*; Li, W.*; Xue, J.*; Fan, X.*; Song, R.*; et al.
Nature Communications (Internet), 16, p.7713_1 - 7713_8, 2025/08
被引用回数:10 パーセンタイル:85.19(Multidisciplinary Sciences)熱効果は、固体状態の冷凍技術の一つの解決策の基盤を成すもので、通常は固体状態の相転移付近で発生し、冷凍温度範囲が限定されている。ここでは、前例のない概念である「全温度帯バロカロリック効果」を導入し実現する。すなわち、KPF
において77.5Kから300Kの極めて広い温度範囲(潜在的に4Kまで)で観測される顕著なバカカロリック効果である。この温度範囲は、一般的な室温、液体窒素、液体水素、液体ヘリウムの冷却領域をカバーしている。直接測定されたバーカロリック断熱温度変化は、250MPaの圧力を解放した際に、室温で12K、77.5Kで2.5Kに達する。この効果は、圧力依存性の中性子粉末回折、ラマン散乱解析、第一原理計算により示されるように、菱面体高圧相への持続的な相転移に起因する。構造的不安定性を考慮した熱力学的エネルギーランドスケープを記述する。この独自の全温度帯バロカロリック効果は、従来の多段式シナリオを超えた、高度に適用可能な固体状態冷凍技術への新たなアプローチを提供する。
Li, F.*; Tang, X.*; Fei, Y.*; Zhang, J.*; Liu, J.*; Lang, P.*; Che, G.*; Zhao, Z.*; Zheng, Y.*; Fang, Y.*; et al.
Journal of the American Chemical Society, 147(17), p.14054 - 14059, 2025/04
被引用回数:2 パーセンタイル:21.18(Chemistry, Multidisciplinary)2,2'-ビピラジン(BPZ)の圧力誘起重合により結晶性グラファンナノリボン(GANR)を合成した。中性子回折データのリートベルト精密化,核磁気共鳴スペクトル,赤外スペクトル,理論計算を行った結果、BPZは
積層した芳香環の間でディールス・アルダー重合し、並外れた長距離秩序を持つ伸びたボート型GANR構造を形成することがわかった。未反応の-C=N-基がボートの両端を橋渡ししており、さらなる機能化の余地がある。このGANRのバンドギャップは2.25eVであり、光電応答は良好である(I
/I
=18.8)。われわれの研究は、高圧トポケミカル重合法が、特定の構造と望んだ特性を持つグラファンの精密な合成に有望な方法であることを強調している。
Rajeev, H. S.*; Hu, X.*; Chen, W.-L.*; Zhang, D.*; Chen, T.*; 古府 麻衣子*; 梶本 亮一; 中村 充孝; Chen, A. Z.*; Johnson, G. C.*; et al.
Journal of the Physical Society of Japan, 94(3), p.034602_1 - 034602_14, 2025/03
被引用回数:2 パーセンタイル:55.25(Physics, Multidisciplinary)Two-dimensional hybrid organic-inorganic perovskites (HOIPs) have emerged as promising materials for light-emitting diode applications. In this study, by using time-of-flight neutron spectroscopy we identified and quantitatively separated the lattice vibrational and molecular rotational dynamics of two perovskites, butylammonium lead iodide (BA)
PbI
and phenethyl-ammonium lead iodide (PEA)
PbI
. By examining the corresponding temperature dependence, we found that the lattice vibrations, as evidenced by neutron spectra, are consistent with the lattice dynamics obtained from Raman scattering. We revealed that the rotational dynamics of organic molecules in these materials tend to suppress their photoluminescence quantum yield (PLQY) while the vibrational dynamics did not show predominant correlations with the same. Additionally, we observed photoluminescence emission peak splitting for both systems, which becomes prominent above certain critical temperatures where the suppression of PLQY begins. This study suggests that the rotational motions of polarized molecules may lead to a reduction in exciton binding energy or the breaking of degeneracy in exciton binding energy levels, enhancing non-radiative recombination rates, and consequently reducing photoluminescence yield. These findings offer a deeper understanding of fundamental interactions in 2D HOIPs and could guide the design of more efficient light-emitting materials for advanced technological applications.
Liu, P.-F.*; Li, X.*; Li, J.*; Zhu, J.*; Tong, Z.*; 古府 麻衣子*; 楡井 真実; Xu, J.*; Yin, W.*; Wang, F.*; et al.
National Science Review, 11(12), p.nwae216_1 - nwae216_10, 2024/12
被引用回数:31 パーセンタイル:91.47(Multidisciplinary Sciences)Crystalline solids exhibiting inherently low lattice thermal conductivity (
) are of great importance in applications such as thermoelectrics and thermal barrier coatings. However,
cannot be arbitrarily low and is limited by the minimum thermal conductivity related to phonon dispersions. In this work, we report the liquid-like thermal transport in a well-ordered crystalline CsAg
Te
, which exhibits an extremely low
value of
0.18 Wm
K
. On the basis of first-principles calculations and inelastic neutron scattering measurements, we find that there are lots of low-lying optical phonon modes at
3.1 meV hosting the avoided-crossing behavior with acoustic phonons. These strongly localized modes are accompanied by weakly bound rattling Ag atoms with thermally induced large amplitudes of vibrations. Using the two-channel model, we demonstrate that coupling of the particle-like phonon modes and the heat-carrying wave-like phonons is essential for understanding the low
, which is heavily deviated from the
temperature dependence of the standard Peierls theory. In addition, our analysis indicates that the soft structural framework with liquid-like motions of the fluctuating Ag atoms is the underlying cause that leads to the suppression of the heat conduction in CsAg
Te
. These factors synergistically account for the ultralow
value. Our results demonstrate that the liquid-like heat transfer could indeed exist in a well-ordered crystal.
Ying, H.*; Yang, X.*; He, H.*; Yan, A.*; An, K.*; Ke, Y.*; Wu, Z.*; Tang, S.*; Zhang, Z.*; Dong, H.*; et al.
Scripta Materialia, 250, p.116181_1 - 116181_7, 2024/09
被引用回数:14 パーセンタイル:79.41(Nanoscience & Nanotechnology)Nanoscale chemical fluctuations and their effect on the deformation behavior of CrFeCoNi-based high-entropy alloys (HEAs) were investigated using small-angle scattering and in situ neutron diffraction measurements. Small-angle scattering results demonstrated the presence of nano (
10 nm) chemical fluctuations in the as-prepared CrFeCoNiPd HEAs, which was attributed to the negative mixing of enthalpy and the significant atomic radius difference between Pd and the constituent elements in the CrFeCoNi-based alloys. Subsequent tensile tests demonstrated that the yield and tensile strengths of the as-prepared CrFeCoNiPd HEA surpass those of the as-prepared CrMnFeCoNi HEA. Neutron diffraction data analysis revealed an anomalous response of dislocation evolution with the strain.
Zeng, Z.*; Zhou, C.*; Zhou, H.*; Han, L.*; Chi, R.*; Li, K.*; 古府 麻衣子; 中島 健次; Wei, Y.*; Zhang, W.*; et al.
Nature Physics, 20(7), p.1097 - 1102, 2024/07
被引用回数:33 パーセンタイル:96.08(Physics, Multidisciplinary)Emergent quasiparticles with a Dirac dispersion in condensed matter systems can be described by the Dirac equation for relativistic electrons, in analogy with Dirac particles in high-energy physics. For example, electrons with a Dirac dispersion have been intensively studied in electronic systems such as graphene and topological insulators. However, charge is not a prerequisite for Dirac fermions, and the emergence of Dirac fermions without a charge degree of freedom has been theoretically predicted to be realized in Dirac quantum spin liquids. These quasiparticles carry a spin of 1/2 but are charge-neutral and so are called spinons. Here we show that the spin excitations of a kagome antiferromagnet, YCu
(OD)
Br
[Br
(OD)
], are conical with a spin continuum inside, which is consistent with the convolution of two Dirac spinons. The predictions of a Dirac spin liquid model with a spinon velocity obtained from spectral measurements are in agreement with the low-temperature specific heat of the sample. Our results, thus, provide spectral evidence for a Dirac quantum spin liquid state emerging in this kagome lattice antiferromagnet. However, the locations of the conical spin excitations differ from those calculated by the nearest-neighbor Heisenberg model, suggesting the Dirac spinons have an unexpected origin.
Wang, S.*; Wang, J.*; Zhang, S.*; Wei, D.*; Chen, Y.*; Rong, X.*; Gong, W.; Harjo, S.; Liu, X.*; Jiao, Z.*; et al.
Journal of Materials Science & Technology, 185, p.245 - 258, 2024/06
被引用回数:29 パーセンタイル:95.01(Materials Science, Multidisciplinary)Nanoprecipitates and nanoscale retained austenite (RA) with suitable stability play crucial roles in determining the yield strength (YS) and ductility of ultrahigh strength steels (UHSSs). However, owing to the kinetics incompatibility between nanoprecipitation and austenite reversion, it is highly challenging to simultaneously introduce high-density nanoprecipitates and optimized RA in UHSSs. In this work, through the combination of austenite reversion treatment (ART) and subsequent flash austenitizing (FA), nanoscale chemical heterogeneity was successfully introduced into a low-cost UHSS prior to the aging process. This chemical heterogeneity involved the enrichment of Mn and Ni in the austenite phase. The resulting UHSS exhibited dual-nanoprecipitation of Ni(Al,Mn) and (Mo,Cr)
C and nanoscale austenite stabilized via Mn and Ni enrichment. The hard martensitic matrix strengthened by high-density dual-nanoprecipitates constrains the plastic deformation of soft RA with a relatively low fraction, and the presence of relatively stable nanoscale RA with adequate Mn and Ni enrichment leads to a marginal loss in YS but keeps a persistent transformation-induced plasticity (TRIP) effect. As a result, the newly-developed UHSS exhibits an ultrahigh YS of 1.7 GPa, an ultimate tensile strength (UTS) of 1.8 GPa, a large uniform elongation (UE) of 8.5 percent, and a total elongation (TE) of 13 percent. The strategy of presetting chemical heterogeneity to introduce proper metastable phases before aging can be extended to other UHSSs and precipitation-hardened alloys.

Liao, J.*; Huang, Z.*; Shangguan, Y.*; Zhang, B.*; Cheng, S.*; Xu, H.*; 梶本 亮一; 蒲沢 和也*; Bao, S.*; Wen, J.*
Physical Review B, 109(22), p.224411_1 - 224411_10, 2024/06
被引用回数:4 パーセンタイル:39.51(Materials Science, Multidisciplinary)Antiferromagnetic van der Waals family
P
(
= Fe, Mn, Co, and Ni;
= S and Se) have attracted significant research attention due to the possibility of realizing long-range magnetic order down to the monolayer limit. Here, we perform inelastic neutron scattering measurements on single-crystal samples of MnPSe
, a member of the
P
family, to study the spin dynamics and determine the effective spin model. The excited magnon bands are well characterized by a spin model, which includes a Heisenberg term with three intraplane exchange parameters (
meV,
meV,
meV) and one interplane parameter (
meV), and an easy-plane single-ion anisotropy term (
meV). Additionally, we observe the intersection of the magnon and phonon bands but no anomalous spectral features induced by the formation of magnon-phonon hybrid excitations at the intersecting region. We discuss possible reasons for the absence of such hybrid excitations in MnPSe
.
Baccou, J.*; Glantz, T.*; Ghione, A.*; Sargentini, L.*; Fillion, P.*; Damblin, G.*; Sueur, R.*; Iooss, B.*; Fang, J.*; Liu, J.*; et al.
Nuclear Engineering and Design, 421, p.113035_1 - 113035_16, 2024/05
被引用回数:12 パーセンタイル:92.28(Nuclear Science & Technology)In the Best-Estimate Plus Uncertainty (BEPU) framework, the use of best-estimate code requires to go through a Verification, Validation and Uncertainty Quantification process (VVUQ). The relevance of the experimental data in relation to the physical phenomena of interest in the VVUQ process is crucial. Adequacy analysis of selected experimental databases addresses this problem. The outcomes of the analysis can be used to select a subset of relevant experimental data, to encourage designing new experiments or to drop some experiments from a database because of their substantial lack of adequacy. The development of a specific transparent and reproducible approach to analyze the relevance of experimental data for VVUQ still remains open and is the topic of this contribution. In this paper, the concept of adequacy initially introduced in the OECD/NEA SAPIUM (Systematic APproach for model Input Uncertainty quantification Methodology) activity is formalized. It is defined through two key properties, called representativeness and completeness, that allows considering the multifactorial dimension of the adequacy problem. A new systematic approach is then proposed to analyze the adequacy of a set of experimental databases. It relies on the introduction of two sets of criteria to characterize representativeness and completeness and on the use of multi-criteria decision analysis method to perform the analysis. Finally, the approach is applied in the framework of the new OECD/NEA ATRIUM activity which includes a set of practical IUQ exercises in thermal-hydraulics to test the SAPIUM guideline in determining input uncertainties and forward propagating them on an application case. It allows evaluating the adequacy of eight experimental databases coming from the Super Moby-dick, Sozzi-Sutherland and Marviken experiments and identifying the most adequate ones.
Guo, B.*; Chen, H.*; Chong, Y.*; Mao, W.; Harjo, S.; Gong, W.; Zhang, Z.*; Jonas, J. J.*; 辻 伸泰*
Acta Materialia, 268, p.119780_1 - 119780_11, 2024/04
被引用回数:32 パーセンタイル:95.78(Materials Science, Multidisciplinary)This paper focused on the characterization and mechanism of the dynamic transformation from the alpha to beta phase during the hot deformation of Ti-6Al-4V alloy and pure titanium. The investigation employed in-situ neutron diffraction and atomistic simulations for a comprehensive understanding of the process. Dynamic transformations were observed during deformation of the Ti-6Al-4V alloy and pure titanium below the beta transus temperatures. During isothermal holding after unloading, the in-situ neutron diffraction results for Ti-6Al-4V and pure titanium indicated a sluggish reverse transformation from the beta to alpha phase. The mechanism of dynamic transformation was explored through in-situ neutron diffraction and atomistic simulations, which revealed twofold effects of deformation on dynamic transformation. Firstly, deformation led to a significant rise in the Gibbs energy of the alpha phase relative to the beta phase, expanding the beta phase region and diminishing the alpha phase region. Secondly, deformation lowered the energy barriers associated with dynamic transformation, facilitating the activation of dynamic transformation more readily than in the equilibrium state before deformation.
FCC hierarchical martensite transformation under dynamic impact in FeMnAlNiTi alloyLi, C.*; Fang, W.*; Yu, H. Y.*; Peng, T.*; Yao, Z. T.*; Liu, W. G.*; Zhang, X.*; 徐 平光; Yin, F.*
Materials Science & Engineering A, 892, p.146096_1 - 146096_11, 2024/02
被引用回数:7 パーセンタイル:57.05(Nanoscience & Nanotechnology)The quasi-static superelastic responses and hierarchical martensite transformation from body-centered cubic (BCC) to face-centered cubic (FCC) under dynamic impact in Fe
Mn
Al
Ni
Ti
alloys were investigated. Polycrystalline and oligocrystalline alloys were produced through solution heat treatment and cyclic heat treatment processes, respectively. The results show the volume fraction of residual martensite for oligocrystalline alloys is lower, which exhibits better superelastic responses compared with polycrystalline alloys. Dynamic impact tests indicate that, despite the weakening of the grain boundary strengthening effect, the ultimate strength of the oligocrystalline alloys closely matches that of the polycrystalline alloys under dynamic impact. The martensite transformation of the FeMnAlNiTi alloy is characterized as hierarchical under dynamic impact, and increasing strain rates and grain sizes can enhance the BCC
FCC martensite transformation, resulting in higher martensite phase fractions for oligocrystalline alloys. The increase in ultimate strength is attributed to the dynamic Hall-Petch effect introduced by more martensite phase interfaces under dynamic impact.
neutron diffractionZhou, Y.*; Song, W.*; Zhang, F.*; Wu, Y.*; Lei, Z.*; Jiao, M.*; Zhang, X.*; Dong, J.*; Zhang, Y.*; Yang, M.*; et al.
Journal of Alloys and Compounds, 971, p.172635_1 - 172635_7, 2024/01
被引用回数:8 パーセンタイル:42.29(Chemistry, Physical)The grain orientation-dependent lattice strain evolution of a (TiZrHfNb)
refractory high-entropy alloy (HEA) during tensile loading has been investigated using
neutron diffraction. The equivalent strain-hardening rate of each of the primary
-oriented grain families was found to be relatively low, manifesting the macroscopically weak work-hardening ability of such a body-centered cubic (BCC)-structured HEA. This finding is indicative of a dislocation planar slip mode that is confined in a few single-slip planes and leads to in-plane softening by high pile-up stresses.