Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
城 鮎美; 菖蒲 敬久; 岡田 達也*; 河野 智哉*; 文屋 宏友*
no journal, ,
アルミニウム単結晶に塑性変形を与えた場合、引張方位111はマクロ的に均一変形する方位である。これまでの研究ではSEM/ECP法やEBSD法によるすべりの様相や方位関係の評価などが行われてきたが、塑性変形したアルミニウム単結晶に対して応力/ひずみの観点から評価し、活動すべり系や内部転位組織の変化と関連付けた研究はほとんど見られなかった。そこで、本研究では放射光X線を利用し、アルミニウム単結晶内の応力/ひずみ分布について評価を行った。その結果、放射光を利用することで、SEM/ECP法やEBSD法では測定できない微小な結晶方位の割れを測定することができた。また、非常に小さい値ではあるが、1結晶粒内でも応力分布が存在していることが明らかになった。
城 鮎美; 菖蒲 敬久; 岡田 達也*; 河野 智哉*; 文屋 宏友*
no journal, ,
The purpose of this study is to clarify the relationship between residual stress in tensile-deformed single crystals and their recrystallization behaviour. Aluminum single crystal having 111 tensile direction was chosen. This crystal exhibit macroscopically uniform multiple-slip without the formation of deformation bands such as kink bands and bands of secondary slip. However, the work-hardening behaviours for this orientation is totally different owing to the difference in dislocation microstructures. Furthermore, post-deformation annealing behaviours of this single crystal are totally different. In the present study, we will evaluate the residual stress in tensile-deformed aluminum single crystals of the multiple-slip orientations such as 111 by using non-destructive X-ray stress measurement method. We expect that the residual stress measurements help quantitative understanding about deformation and recrystallization.
城 鮎美; 岡田 達也*; 河野 智哉*; 佐藤 崇史*; 菖蒲 敬久
no journal, ,
純アルミニウム単結晶の引張方位111は均一変形方位と呼ばれ、塑性変形しても不均一変形帯が形成されず、マクロ的に均一変形することが知られている。また、室温と液体窒素温度での引張変形を比較すると、後者では交差すべりの発生が抑制されることから、加工硬化が最も高くなることが明らかになっている。これまでは光学顕微鏡によるすべり帯様相の観察や、走査型電子顕微鏡による結晶方位の変化などの定性的な評価が主であったが、我々は放射光X線回折を利用し、室温と液体窒素温度で引張変形したアルミニウム単結晶111引張方位の残留応力、結晶性などの定量的な評価を実施した。その結果、最も加工硬化が高い液体窒素温度引張の試験片において、残留ひずみは10010以下であり、ひずみ分布が存在しないこと、結晶性は室温の方が液体窒素温度引張よりも良いことを明らかにした。