Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Fujita, Tatsuya; Yamamoto, Akio*
Journal of Nuclear Science and Technology, 62(2), p.179 - 196, 2025/02
Times Cited Count：0 Percentile：0.00(Nuclear Science & Technology)This study newly established a direct coupling code system consisting of the nuclear data processing code FRENDY version 2, and the three-dimensional heterogeneous transport code GENESIS (FRENDY-V2/GENESIS) for easy implementation of the random-sampling-based uncertainty quantification considering the implicit effect due to nuclear cross-section (XS) perturbations. The multi-group macroscopic XSs prepared for GENESIS were generated by FRENDY version 2, where the Dancoff factor was calculated by the neutron current method. Then the background XSs were evaluated based on the Carlvik two-term rational approximation. The infinite multiplication factor (k-infinity) and the fission reaction rate distribution in UO
and MOX lattice geometries were compared with MVP3 to verify the calculation accuracy of FRENDY-V2/GENESIS. The sensitivity analyses on the discretization conditions such as the ray tracing of the method of characteristics were also carried out. Through several comparisons between FRENDY-V2/GENESIS and MVP3, FRENDY-V2/GENESIS with the SHEM 361-group structure calculates the k-infinity within approximately 50 pcm and the fission reaction rate distribution within approximately 0.1% by the root mean square, respectively. Consequently, the applicability of FRENDY-V2/GENESIS was verified, and FRENDY-V2/GENESIS can be used to discuss the implicit effect due to multi-group XS perturbations.
Wakasa, Sachi*; Ishiyama, Tatsuya*; Hirouchi, Daisuke*; Matta, Nobuhisa*; Fujita, Natsuko; Echigo, Tomoo*
Geomorphology, 468, p.109497_1 - 109497_8, 2025/01
Times Cited Count：0 Percentile：0.00(Geography, Physical)To estimate long-term rates of coastal uplift along the northern Pacific coast of Northeast Japan, we determined the surface exposure ages of marine and fluvial terraces based on terrestrial in situ cosmogenic radionuclide dating of exposed bedrock surfaces. Based on reinterpretation of marine and fluvial terraces, we collected samples from the northern and southern Sanriku coast. The surface exposure ages from 
Be concentrations in quartz calculated from the measured Be/
Be ratios commonly suggest middle to late Pleistocene ages for the marine and fluvial terraces and slow coastal uplift rates at intermediate timescales. The results demonstrate different styles of crustal strain accommodation in the northern Northeast Japan arc above the subducting Pacific plate.
Suyama, Kenya; Gunji, Satoshi; Watanabe, Tomoaki; Araki, Shohei; Fukuda, Kodai; Shimada, Kazuya; Fujita, Tatsuya; Ueki, Taro; Nguyen, H.
JAEA-Conf 2024-001, 40 Pages, 2024/07
JAEA-Conf-2024-001.pdf:1.28MB
JAEA-Conf-2024-001-appendix(CD-ROM).zip:163.97MB
The 12th International Conference on Nuclear Criticality Safety (ICNC2023) was held from October 1 to October 6, 2023, at the Sendai International Center (Aobayama, Aoba-ku, Sendai, Miyagi-prefecture 980-0856, Japan), organized by Japan Atomic Energy Agency (JAEA) and co-organized by the Reactor Physics Division of the Atomic Energy Society of Japan (AESJ) and the Nuclear Energy Agency of the Organization for Economic Co-operation and Development (OECD/NEA). 224 presentations passed peer review and 273 technical session registrations, bringing the total number of registered participants to 289, including accompanying persons. Technical tours were also conducted to i) Fukushima Daiichi Nuclear Power Station of TEPCO holdings and Interim Storage Facility Information Center, ii) Nuclear Science Research Institute of JAEA (STACY Renewable Reactor and FCA), iii) NanoTerasu of Tohoku University (synchrotron radiation facility) and Onagawa Nuclear Power Station of Tohoku Electric Power Co., Inc. This report summarizes the conference and compiles the papers that were presented and agreed to be published in the Proceedings.
Tc separation/concentration technology from 
Mo by (n, 
) method, 2Fujita, Yoshitaka; Hu, X.*; Yang, Y.*; Kitagawa, Taiga*; Fujihara, Yasuyuki*; Yoshinaga, Hisao*; Hori, Junichi*; Do, T. M. D.*; Suzuki, Tatsuya*; Suematsu, Hisayuki*; et al.
KURNS Progress Report 2023, P. 122, 2024/07
no abstracts in English
Fujita, Tatsuya
Robutsuri No Kenkyu (Internet), (77), 4 Pages, 2024/06
This is a report on the International Conference on Reactor Physics (PHYSOR2024) held in April 2024. In the "Robutsuri-No-Kenkyu," a newsletter of the Reactor Physics Division in the Atomic Energy Society of Japan, participation reports are written from the viewpoints of university professors and students, vendor engineers, and research institute researchers. This report describes the contents of the research presentations at this international conference from the perspective of the research institute researcher.
Hu, X.*; Fujita, Yoshitaka; Tsuchiya, Kunihiko; Fukutani, Satoshi*; Hori, Junichi*; Suzuki, Tatsuya*
Journal of Radioanalytical and Nuclear Chemistry, 333(11), p.6057 - 6063, 2024/05
Times Cited Count：0 Percentile：0.00(Chemistry, Analytical)no abstracts in English
Fujita, Tatsuya
Proceedings of Best Estimate Plus Uncertainty International Conference (BEPU 2024) (Internet), 14 Pages, 2024/05
The uncertainty analysis of PWR depletion test problem on the OECD/NEA/NSC LWR-UAM benchmark Phase II based on JENDL-5 was performed as a preliminary investigation. The random sampling was used to quantify the uncertainty of k-infinity and nuclide inventories, the cross section (XS), the fission product yield (FPY), the decay constant, and the decay branch ratio were randomly perturbed, and several times of SERPENT 2.2.1 calculations were performed. XSs in the ACE file were perturbed by the ACE file perturbation tool using FRENDY with the 56-group covariance matrix generated by NJOY2016.72. The perturbation quantity of independent FPY was evaluated using the FPY covariance matrix prepared in JENDL-5, and the perturbed cumulative FPY was reconstructed based on the relationship between the independent and cumulative FPYs. The decay constant was independently perturbed for each nuclide. To perturb the decay branch ratios, the covariance matrix was generated by applying the generalized least square method and randomly perturbed based on this covariance matrix in the same manner as the independent FPY. In general, the influence due to decay data was an order of magnitude smaller than the influences due to XS and FPY uncertainties. For the uncertainty of k-infinity and transuranic nuclide inventories, the influence due to XS uncertainty was dominant, and that due to FPY and decay data uncertainties was one or a few orders of magnitude smaller. On the other hand, for the uncertainty of FP nuclide inventories, the influence due to FPY uncertainty was almost the same or larger than that due to XS uncertainty. It was also confirmed that the influence due to either XS or FPY uncertainty became different for each FP nuclide. In future studies, the influence due to XS uncertainty on FP nuclides will be discussed because it was not prepared in JENDL-5 and not considered in the present paper.
Fujita, Tatsuya
Proceedings of International Conference on Physics of Reactors (PHYSOR 2024) (Internet), p.718 - 727, 2024/04
The convergence process of the k-infinity uncertainty during random-sampling-based uncertainty quantification was compared between several efficient sampling techniques. The k-infinity uncertainty was evaluated by statistically processing several times of SERPENT 2.2.1 calculations using perturbed ACE files based on JENDL-5 cross-section covariance data. The antithetic sampling (AS), the Latin hypercube sampling (LHS), the control variates (CV), and the combination approaches of them were focused on in the present paper. In PWR-UO fuel assembly geometry without the nuclide depletion, as discussed in past studies, AS and LHS showed higher efficient convergence than nominal sampling without any efficient sampling techniques. In terms of CV, though a stand-alone application did not have a large impact on the k-infinity uncertainty convergence, its performance was improved in combination with AS, as discussed in the past study. In addition, a new combined approach of LHS and CV (CV+LHS) was proposed in the present paper. CV+LHS improved the k-infinity uncertainty convergence and was more efficient than CV+AS. The main reason for this improvement was that the convergence for the mean value of alternative parameters in CV was enhanced by applying LHS. Consequently, this study proposed the new combined approach of CV+LHS and confirmed its efficiency performance for the random-sampling-based uncertainty quantification in the PWR-UO fuel assembly geometry. The applicability of CV+LHS for the nuclide-depletion calculations will be confirmed in future studies.
Mo hot atoms made by a neutron capture method from 
-MoO
to waterQuach, N. M.*; Ngo, M. C.*; Yang, Y.*; Nguyen, T. B.*; Nguyen, V. T.*; Fujita, Yoshitaka; Do, T. M. D.*; Nakayama, Tadachika*; Suzuki, Tatsuya*; Suematsu, Hisayuki*
Journal of Radioanalytical and Nuclear Chemistry, 332(10), p.4057 - 4064, 2023/10
Times Cited Count：4 Percentile：62.75(Chemistry, Analytical)Technetium-99m (Tc) is the most widely used medical radioisotope in the world and is produced from molybdenum-99 (Mo). Production of Mo via the neutron capture method draws attention as an alternative to fission-derived Mo due to non-proliferation issues, but the specific radioactivity of Mo is extremely low. In this work, a porous -MoO wire was prepared as an irradiation target in order to improve the specific activity by extracting Mo. Porous -MoO wire is synthesized from Mo metal wire by a two-step heating procedure. The hot atom effect of Mo was confirmed by activity and isotope measurements of the porous -MoO wire after neutron irradiation and the water used for extraction. In term of the extraction effectiveness, the effectiveness of Mo extraction in the porous -MoO wire was comparable to that of commercial -MoO powder.
-MoO whiskers in Mo/
Tc radioisotope production and Mo/Tc extraction using hot atomsNgo, M. C.*; Fujita, Yoshitaka; Suzuki, Tatsuya*; Do, T. M. D.*; Seki, Misaki; Nakayama, Tadachika*; Niihara, Koichi*; Suematsu, Hisayuki*
Inorganic Chemistry, 62(32), p.13140 - 13147, 2023/08
Times Cited Count：5 Percentile：54.36(Chemistry, Inorganic & Nuclear)Technetium-99m (Tc) is one of the most important radioisotopes for diagnostic radio-imaging applications. Tc is a daughter product of the Mo isotope. There are two methods used to produce Mo/Tc: the nuclear fission (n,f) and the neutron capture (n,) methods. Between them, the (n,f) method is the main route, used for approximately 90% of the world's production. However, the (n,f) method faces numerous problems, including the use of highly enriched uranium, the release of highly radioactive waste, and nonproliferation problems. Therefore, the (n,) method is being developed as a future replacement for the (n,f) method. In this work, -MoO whiskers prepared by the thermal evaporation method and -MoO particles were irradiated in a nuclear reactor to produce Mo/Tc via neutron capture. The irradiated targets were dispersed into water to extract the Mo/Tc. As a result, -MoO whisker yielded higher Mo extraction rate than that from -MoO. In addition, by comparing the dissolved 
Mo concentrations in water, we clarified a prominent hot-atom of -MoO whiskers. This research is the first demonstration of -MoO being used as an irradiation target in the neutron capture method. On the basis of the results, -MoO is considered a promising irradiation target for producing Mo/Tc by neutron capture and using water for the radioisotope extraction process in the future.
Tc separation/concentration technology from Mo by (n, ) methodFujita, Yoshitaka; Hu, X.*; Takeuchi, Tomoaki; Takeda, Ryoma; Fujihara, Yasuyuki*; Yoshinaga, Hisao*; Hori, Junichi*; Suzuki, Tatsuya*; Suematsu, Hisayuki*; Ide, Hiroshi
KURNS Progress Report 2022, P. 110, 2023/07
no abstracts in English
Mo/Tc generator by (n, ) method, 4Fujita, Yoshitaka; Seki, Misaki; Ngo, M. C.*; Do, T. M. D.*; Hu, X.*; Yang, Y.*; Takeuchi, Tomoaki; Nakano, Hiroko; Fujihara, Yasuyuki*; Yoshinaga, Hisao*; et al.
KURNS Progress Report 2021, P. 118, 2022/07
no abstracts in English
Fujita, Yoshitaka; Niizeki, Tomotake*; Fukumitsu, Nobuyoshi*; Ariga, Katsuhiko*; Yamauchi, Yusuke*; Malgras, V.*; Kaneti, Y. V.*; Liu, C.-H.*; Hatano, Kentaro*; Suematsu, Hisayuki*; et al.
Bulletin of the Chemical Society of Japan, 95(1), p.129 - 137, 2022/01
Times Cited Count：10 Percentile：61.73(Chemistry, Multidisciplinary)In this work, the mechanisms responsible for the adsorption of molybdate ions on alumina are investigated using in-depth surface analyses carried out on alumina specimens immersed in solutions containing different molybdate ions at different pH values. The obtained results reveal that when alumina is immersed in an acidic solution containing molybdate ions, the hydroxyl groups present on the surface are removed to generate positively charged sites, and molybdate ions (MoO
or AlMo
O
H
) are adsorbed by electrostatic interaction. Alumina dissolves slightly in an acidic solution to form AlMoOH, which is more easily desorbed than MoO. Furthermore, the enhancement in the Mo adsorption or desorption property may be achieved by enriching the surface of the alumina adsorbent with many -OH groups and optimizing Mo solution to adsorb molybdate ions on alumina as MoO ions. These findings will assist researchers in engineering more efficient and stable alumina-based adsorbents for molybdenum adsorption used in medical radioisotope (Mo/Tc) generators.
Mo adsorption and Tc elution with alumina columnsFujita, Yoshitaka; Seki, Misaki; Sano, Tadafumi*; Fujihara, Yasuyuki*; Suzuki, Tatsuya*; Yoshinaga, Hisao*; Hori, Junichi*; Suematsu, Hisayuki*; Tsuchiya, Kunihiko
Journal of Physics; Conference Series, 2155, p.012018_1 - 012018_6, 2022/01
Technetium-99m (Tc), the daughter nuclide of Molybdenum-99 (Mo), is the most commonly used radioisotope in radiopharmaceuticals. The research and development (R&D) for the production of Mo by the neutron activation method ((n, ) method) has been carried out from viewpoints of no-proliferation and nuclear security, etc. Since the specific activity of Mo produced by the (n, ) method is extremely low, developing AlO with a large Mo adsorption capacity is necessary to adapt (n, )Mo to the generator. In this study, three kinds of AlO specimens with different raw materials were prepared and compared their adaptability to generators by static and dynamic adsorption. MoO pellet pieces (1.5g) were irradiated with 5 MW for 20 min in the Kyoto University Research Reactor (KUR). Irradiated MoO pellet pieces were dissolved in 6M-NaOH aq. In dynamic adsorption, 1 g of AlO was filled into a PFA tube (
1.59 mm). The Mo adsorption capacity of AlO specimens under dynamic condition was slightly reduced compared to that under static condition. The Tc elution rate was about 100% at 1.5 mL of milking in dynamic adsorption, while it was around 56-87% in static adsorption. The Mo/Tc ratio of dynamic condition was greatly reduced compared to that of static condition. Therefore, the Tc elution property is greatly affected by the method of adsorbing Mo, e.g., the column shape, the linear flow rate, etc.
Mo/Tc generator by (n, ) method, 3Fujita, Yoshitaka; Seki, Misaki; Namekawa, Yoji*; Nishikata, Kaori; Daigo, Fumihisa; Ide, Hiroshi; Tsuchiya, Kunihiko; Sano, Tadafumi*; Fujihara, Yasuyuki*; Hori, Junichi*; et al.
KURNS Progress Report 2020, P. 136, 2021/08
no abstracts in English
Furuya, Osamu*; Fujita, Satoshi*; Muta, Hitoshi*; Otori, Yasuki*; Itoi, Tatsuya*; Okamura, Shigeki*; Minagawa, Keisuke*; Nakamura, Izumi*; Fujimoto, Shigeru*; Otani, Akihito*; et al.
Proceedings of ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (Internet), 6 Pages, 2021/07
Since the Fukushima accident, with the higher safety requirements of nuclear facilities in Japan, suppliers, manufacturers and academic societies have been actively considering the reconstruction of the safety of nuclear facilities from various perspectives. The Nuclear Regulation Authority has formulated new regulatory standards and is in operation. The new regulatory standards are based on defense in depth, and have significantly raised the levels of natural hazards and have requested to strengthen the countermeasures from the perspective of preventing the simultaneous loss of safety functions due to common factors. Facilities for dealing with specific serious accidents are required to have robustness to ensure functions against earthquakes that exceed the design standards to a certain extent. In addition, since the probabilistic risk assessment (PRA) and the safety margin evaluation are performed to include the range beyond the design assumption in the safety improvement evaluation, it is very important to extent the special knowledge in the strength of important equipment for seismic safety. This paper summarizes the research and examination results of specialized knowledge on the concept of maintaining the functions of important seismic facilities and the damage index to be considered by severe earthquakes. In the other paper, the study on reliability of seismic capacity analysis for important equipment in nuclear facilities will be reported.
Sakakibara, Hiroshi; Aoki, Nobuhiro; Muto, Masahiro; Otabe, Jun; Takahashi, Kenji*; Fujita, Naoyuki*; Hiyama, Kazuhiko*; Suzuki, Hirokazu*; Kamogawa, Toshiyuki*; Yokosuka, Toru*; et al.
JAEA-Technology 2020-020, 73 Pages, 2021/03
JAEA-Technology-2020-020.pdf:8.26MB
The decommissioning is currently in progress at the prototype fast breeder reactor Monju. Fuel assemblies will be taken out of its core for the first step of the great task. Fuel assemblies stand on their own spike plugged into a socket on the core support plate and support with adjacent assemblies through their housing pads each other, resulting in steady core structure. For this reason, some substitutive assemblies are necessary for the purpose of discharging the fuel assemblies of the core. Monju side commissioned, therefore, Plutonium Fuel Development Center to manufacture the substitutive assemblies and the Center accepted it. This report gives descriptions of design, manufacture, and shipment in regard to the substitutive assemblies.
Mo-adsorption/Tc-elution properties of alumina with different surface structuresFujita, Yoshitaka; Seki, Misaki; Sano, Tadafumi*; Fujihara, Yasuyuki*; Kitagawa, Tomoya*; Matsukura, Minoru*; Hori, Junichi*; Suzuki, Tatsuya*; Tsuchiya, Kunihiko
Journal of Radioanalytical and Nuclear Chemistry, 327(3), p.1355 - 1363, 2021/03
Times Cited Count：4 Percentile：40.86(Chemistry, Analytical)We prepared three types of AlO with different surface structures and investigated Mo-adsorption/Tc-elution properties using [Mo]MoO that was irradiated in the Kyoto University Research Reactor. AlO adsorbed [Mo]molybdate ions in solutions at different pH; the lower was the pH, the higher was the Mo-adsorption capacity of AlO. The Tc-elution properties of molybdate ion adsorbed AlO were elucidated by flowing saline. Consequently, it was suggested that Mo-adsorption/desorption properties are affected by the specific surface of AlO and Tc-elution properties are affected by the crystal structure of AlO.
Mo/Tc generator by (n,) method, 2Fujita, Yoshitaka; Seki, Misaki; Namekawa, Yoji*; Nishikata, Kaori; Kato, Yoshiaki; Sayato, Natsuki; Tsuchiya, Kunihiko; Sano, Tadafumi*; Fujihara, Yasuyuki*; Hori, Junichi*; et al.
KURNS Progress Report 2019, P. 157, 2020/08
no abstracts in English
O(
He,
)F reaction; Identification of the low-energy "super" -Gamow-Teller stateFujita, Hirohiko*; Fujita, Yoshitaka*; Utsuno, Yutaka; Yoshida, Kenichi*; Adachi, Tatsuya*; Algora, A.*; Csatl
s, M.*; Deaven, J. M.*; Estevez-Aguado, E.*; Guess, C. J.*; et al.
Physical Review C, 100(3), p.034618_1 - 034618_13, 2019/09
Times Cited Count：15 Percentile：77.80(Physics, Nuclear)no abstracts in English
