Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Murakami, Masashi; Hoshino, Yuzuru; Nakatani, Takayoshi; Sugaya, Toshikatsu; Fukumura, Nobuo*; Sanda, Toshio*; Sakai, Akihiro
JAEA-Technology 2019-003, 50 Pages, 2019/06
JAEA-Technology-2019-003.pdf:4.42MB
Toward the establishment of a common approach to determine the radioactivity concentrations in dismantling wastes arising from research reactors, radionuclide concentrations in the reactor structure materials of aluminum, carbon steel, shield concrete, and graphite of TRIGA Mark II reactor at Rikkyo University, Japan, were evaluated with both radiochemical analysis and theoretical calculation. The measured nuclides by the radiochemical analysis were 
H, 
Co, and 
Ni in aluminum, H, Co, Ni, and 
Eu in carbon steel, H, Co, and Eu in shield concrete, and H, 
C, Co, Ni, and Eu in graphite. Neutron-flux distributions and neutron-induced activities were computed with DORT and ORIGEN-ARP codes, respectively. Using the results of material composition analysis, radioactivity concentrations were conservatively predicted with good accuracy except for graphite material.
Tsuji, Tomoyuki; Hoshino, Yuzuru; Sakai, Akihiro; Sakamoto, Yoshiaki; Suzuki, Yasuo*; Machida, Hiroshi*
JAEA-Technology 2017-010, 75 Pages, 2017/06
JAEA-Technology-2017-010.pdf:2.31MB
It is necessary for reasonable disposal to be studied on evaluation methods to determine radioactivity concentrations in the radioactive wastes, which is generated from post-irradiation examination (PIE) facilities, for establishment of reasonable confirmation methods concerning radioactive wastes generated from research, industrial, and medical facilities. It has been chosen the PIE facilities of NUCLEAR DEVELOPMENT CORPORATION as a model for this study. As a result, it has been confirmed that the theoretical methods are applied for the important nuclides (H-3, C-14, Co-60, Ni-63, Sr-90, Tc-99, Cs-137, Eu-154, U-234, U-235, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Am-241 and Cm-244).
Hayashi, Hirokazu; Okada, Shota; Izumo, Sari; Hoshino, Yuzuru; Tsuji, Tomoyuki; Nakata, Hisakazu; Sakai, Akihiro; Amazawa, Hiroya; Sakamoto, Yoshiaki
Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 7 Pages, 2017/04
A near surface disposal for low-level radioactive waste (LLW) generated from commercial nuclear power plants (NPP) is operating in Japan. However, the disposal of LLW from other nuclear facilities and radioisotope utilization facilities has not yet been implemented. Japan Atomic Energy Agency (JAEA) plans to implement the near surface disposal. In order to be disposed of these wastes, it must be confirmed by the regulator that each waste package (radioactive waste solidified with filling materials, such as cement, in a container by a regulated method is termed a waste package) conforms to technical standards that aim for safe disposal. JAEA has studied reasonable confirmation methods to demonstrate the conformity of the waste package to the technical standard as NPP operators have studied it. This report describes the outline of our activities focused on development of the confirmation method applicable to radioactive wastes from research facilities.
Hoshino, Yuzuru; Sakamoto, Yoshiaki; Muroi, Masayuki*; Mukai, Satoru*
JAEA-Technology 2015-015, 96 Pages, 2015/07
JAEA-Technology-2015-015.pdf:20.34MB
In order to dispose of the radioactive waste which generates from post-irradiation examination (PIE) facilities, the common evaluation method of radioactivity in wastes from PIE should be established by the actual data such as radioactivity values and the theoretical calculation. In this study, the radioactivity concentrations of 17 nuclides (H-3, C-14, Co-60, Ni-63, Sr-90, Tc-99, Cs-137, Eu-154, U-234, U-235, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Am-241, Cm-244) in combustible wastes stored in NUCLEAR DEVELOPMENT CORPORATION were measured from 3 samples and the radioactivity was calculated by ORIGEN-2 based on initial contents and operation record of the spent fuel. From the comparison of the obtained data by the radiological measurement with the calculated values, the subject to be solved for establishment of the radioactivity evaluation method for PIE was extracted.
Tsuji, Tomoyuki; Sakamoto, Yoshiaki; Hoshino, Yuzuru; Suzuki, Yasuo*; Machida, Hiroshi*
no journal, ,
JAEA is planning a business for the disposal of low level radioactive wastes generated from research, industrial, and medical facilities. Because those wastes are generated from various facilities, it is important to develop reasonable confirmation methods based on the characteristics of radioactive wastes. As a model case of development of the evaluation method to determine the radioactivity concentration, the common method was studied to determine the radioactivity concentration of PIE wastes stored in NDC. The radioactivity concentrations of 17 nuclides (Sr-90, Tc-99, U-235, 238, Pu-238, 239+240, 241, Am-241, Cm-244 and so on) were calculated by ORIGEN-2 based on actual data such as initial contents and operation record of the spent fuel. From the comparison of the obtained data by radiological measurement with calculated values, it was studied that the theoretical method was applied to determine the radioactivity concentrations of 17 nuclides of PIE wastes.