Progress in development and design of the neutral beam injector for JT-60SA

Hanada, Masaya; Kojima, Atsushi; Tanaka, Yutaka; Inoue, Takashi; Watanabe, Kazuhiro; Taniguchi, Masaki; Kashiwagi, Mieko; Tobari, Hiroyuki; Umeda, Naotaka; Akino, Noboru; et al.

Fusion Engineering and Design, 86(6-8), p.835 - 838, 2011/10

https://doi.org/10.1016/j.fusengdes.2011.04.068

Neutral beam (NB) injectors for JT-60 Super Advanced (JT-60SA) have been designed and developed. Twelve positive-ion-based and one negative-ion-based NB injectors are allocated to inject 30 MW D beams in total for 100 s. Each of the positive-ion-based NB injector is designed to inject 1.7 MW for 100s at 85 keV. A part of the power supplies and magnetic shield utilized on JT-60U are upgraded and reused on JT-60SA. To realize the negative-ion-based NB injector for JT-60SA where the injection of 500 keV, 10 MW D beams for 100s is required, R&Ds of the negative ion source have been carried out. High-energy negative ion beams of 490-500 keV have been successfully produced at a beam current of 1-2.8 A through 20% of the total ion extraction area, by improving voltage holding capability of the ion source. This is the first demonstration of a high-current negative ion acceleration of 1 A to 500 keV. The design of the power supplies and the beamline is also in progress. The procurement of the acceleration power supply starts in 2010.

Achievement of 500 keV negative ion beam acceleration on JT-60U negative-ion-based neutral beam injector

Kojima, Atsushi; Hanada, Masaya; Tanaka, Yutaka*; Kawai, Mikito*; Akino, Noboru; Kazawa, Minoru; Komata, Masao; Mogaki, Kazuhiko; Usui, Katsutomi; Sasaki, Shunichi; et al.

Nuclear Fusion, 51(8), p.083049_1 - 083049_8, 2011/08

https://doi.org/10.1088/0029-5515/51/8/083049

Hydrogen negative ion beams of 490 keV, 3 A and 510 keV, 1 A have been successfully produced in the JT-60 negative ion source with three acceleration stages. These successful productions of the high-energy beams at high current have been achieved by overcoming the most critical issue, i.e., a poor voltage holding of the large negative ion sources with the grids of 2 m for JT-60SA and ITER. To improve voltage holding capability, the breakdown voltages for the large grids was examined for the first time. It was found that a vacuum insulation distance for the large grids was 6-7 times longer than that for the small-area grid (0.02 m). From this result, the gap lengths between the grids were tuned in the JT-60 negative ion source. The modification of the ion source also realized a significant stabilization of voltage holding and a short conditioning time. These results suggest a practical use of the large negative ion sources in JT-60SA and ITER.

Antiferromagnetic interaction between paramagnetic Co ions in the diluted magnetic semiconductor ZnCoO

Kobayashi, Masaki*; Ishida, Yukiaki*; Hwang, J. I.*; Osafune, Yoshitaka*; Fujimori, Atsushi*; Takeda, Yukiharu; Okane, Tetsuo; Saito, Yuji; Kobayashi, Keisuke*; Saeki, Hiromasa*; et al.

Physical Review B, 81(7), p.075204_1 - 075204_7, 2010/02

AA2009-0975.pdf:0.87MB

https://doi.org/10.1103/PhysRevB.81.075204

Recent R&D activities of negative-ion-based ion source for JT-60SA

Ikeda, Yoshitaka; Hanada, Masaya; Kamada, Masaki; Kobayashi, Kaoru; Umeda, Naotaka; Akino, Noboru; Ebisawa, Noboru; Inoue, Takashi; Honda, Atsushi; Kawai, Mikito; et al.

IEEE Transactions on Plasma Science, 36(4), p.1519 - 1529, 2008/08

https://doi.org/10.1109/TPS.2008.927382

The JT-60SA N-NBI system is required to inject 10 MW for 100 s at 500 keV. Three key issues should be solved for the JT-60SA N-NBI ion source. One is to improve the voltage holding capability. Recent R&D tests suggested that the accelerator with a large area of grids may need a high margin in the design of electric field and a long time for conditioning. The second issue is to reduce the grid power loading. It was found that some beamlets were strongly deflected due to beamlet-beamlet interaction and strike on the grounded grid. The grids are to be designed by taking account of beamlet-beamlet interaction in three-dimensional simulation. Third is to maintain the D- production for 100 s. A simple cooling structure is proposed for the active cooled plasma grid, where a key is the temperature gradient on the plasma grid for uniform D- production. The modified N-NBI ion source will start on JT-60SA in 2015.

Long pulse production of high current D ion beams in the JT-60 negative ion source

Hanada, Masaya; Kamada, Masaki; Akino, Noboru; Ebisawa, Noboru; Honda, Atsushi; Kawai, Mikito; Kazawa, Minoru; Kikuchi, Katsumi; Komata, Masao; Mogaki, Kazuhiko; et al.

Review of Scientific Instruments, 79(2), p.02A519_1 - 02A519_4, 2008/02

https://doi.org/10.1063/1.2821508

A long pulse production of high-current, high-energy D ion beams was studied in the JT-60U negative ion source that was designed to produce 22 A, 500 keV D ion beams. Prior to the long pulse production, the short pulse beams were produced to examine operational ranges for a stable voltage holding capability and an allowable grid power loading. From a correlation between the voltage holding capability and a light intensity of cathodoluminescence from the insulator made of Fiber Reinforced Plastic insulator, the voltage holding was found to be stable at 340 kV where the light was sufficiently suppressed. The grid power loading for the long pulse operation was also decreased to the allowable level of 1 MW without a significant reduction of the beam power by tuning the extraction voltage (Vext) and the arc power (Parc). These allow the production of 30 A D ion beams at 340 keV from two ion sources at Vacc = 340 kV. The pulse length was extended step by step, and finally reached up to 21 s, where the beam pulse length was limited by the surface temperature of the beam scraper without water cooling. The D ion beams were neutralized to via a gas cell, resulting in a long pulse injection of 3.2 MW D beams for 21 s. This is the first long injection of 20 s in a power range of 3 MW.

Characteristics of voltage holding and light emission on the accelerator of JT-60U N-NBI ion source

Kikuchi, Katsumi; Akino, Noboru; Hanada, Masaya; Ikeda, Yoshitaka; Kamada, Masaki; Kawai, Mikito; Mogaki, Kazuhiko; Noto, Katsuya; Usui, Katsutomi

JAEA-Technology 2007-027, 17 Pages, 2007/03

JAEA-Technology-2007-027.pdf:2.3MB

Voltage holding capability of the 500 kV accelerator in the JT-60 negative ion source that is one of the key issues for high performance of the JT-60 negative-ion-based NBI system was investigated. The achieved voltage holding capabilities with and without the beam acceleration were 400 kV and 455 kV, respectively. To understand a poor voltage holding capability of the negative ion source, correlation between the voltage holding capability and the light emitted inside the ion source was carefully examined. The acceleration voltage was stably applied at 400kV, where the light intensity was almost zero. Increasing the acceleration voltage beyond 400 kV, the voltage holding become very unstable where the light intensity increases in proportion to the acceleration voltage. The spectroscopy measurement showed that the light spectrum was a broad wavelength of 360 - 500 nm peaked at 420 nm. There was no line spectrum due to the gas discharge such as hydrogen, oxygen, carbon. From these results, it is seemed that the origin of the light emission is a cathode luminescence from the FRP (Fiberglass Reinforced Plastic) insulator in JT-60 negative ion source due to the electron impact. Moreover, breakdown phenomena at inside and outside of the ion source were examined by using photo-multipliers with fast data acquisition system. When the breakdown occurred inside the ion source, the breakdowns sequentially occurred at the spark gap switches outside of the ion source, which protect the FRP insulator from the flashover on its surface. Once the spark gap was turned on after the breakdown inside the ion source, the breakdowns at the spark gap occurred at lower voltage than the normal set value when the high voltage was applied again after 70 ms interval. This result indicates that the voltage holding capability was limited by the spark gap switches in this operational sequence.

Characterization of magnetic components in the diluted magnetic semiconductor ZnCoO by X-ray magnetic circular dichroism

Kobayashi, Masaki*; Ishida, Yukiaki*; Hwang, J. I.*; Mizokawa, Takashi*; Fujimori, Atsushi*; Mamiya, Kazutoshi*; Okamoto, Jun*; Takeda, Yukiharu; Okane, Tetsuo; Saito, Yuji; et al.

Physical Review B, 72(20), p.201201_1 - 201201_4, 2005/11

https://doi.org/10.1103/PhysRevB.72.201201

no abstracts in English

Experiment of voltage holding capability on the accelerator of JT-60U N-NBI ion source

Takenouchi, Tadashi; Akino, Noboru; Ikeda, Yoshitaka; Kamada, Masaki; Kawai, Mikito; Kikuchi, Katsumi; Tanai, Yutaka; Hanada, Masaya

no journal, , 

no abstracts in English

Research and development of high performance FBR core materials based on grain boundary engineering, 2; Evaluation of tensile properties

Yano, Yasuhide; Yamashita, Shinichiro; Endo, Masaki*; Sakaguchi, Norihito*; Watanabe, Seiichi*; Miyagi, Masanori*; Oyamada, Tetsuya*; Sato, Shinya*; Sato, Yutaka*; Kokawa, Hiroyuki*; et al.

no journal, , 

no abstracts in English

Dependence evaluation on grain boundary characteristic for corrosion effects after irradiaion

Endo, Masaki*; Sakaguchi, Norihito*; Kinoshita, Hiroshi*; Watanabe, Seiichi*; Kokawa, Hiroyuki*; Yamashita, Shinichiro; Yano, Yasuhide; Kawai, Masayoshi*

no journal, , 

no abstracts in English