検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 7 件中 1件目~7件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Update status of the J-PARC 3NBT control system

大井 元貴; 明午 伸一郎; 圷 敦*; 川崎 智之; 西川 雅章*; 福田 真平

Proceedings of 12th International Topical Meeting on Nuclear Applications of Accelerators (AccApp '15), p.89 - 96, 2016/00

J-PARCでは、3GeV, 1MWの陽子ビームを3GeV陽子ビーム輸送施設(3NBT)を経由して核破砕中性子源施設に輸送する。J-PARCのような大出力の加速器施設では、僅かなビームロスであっても、重大な故障に発展する可能性があるため、小さな異常の段階で迅速に検知するためのシステムが必要であり、EPICSとCSS(Control System Studio)を用いた監視制御システムを開発した。これにより、モニタデータを複合的に評価する環境を構築した。また、ビーム調整を効率よく行うためにSADコードを用いた制御システムを開発し、数ショットのビームで容易にビーム診断および調整を可能にし、ビーム電流密度の平坦化を目的として導入された8極電磁石に起因する非線形ビーム光学への対応も行った。これらのビーム輸送系の制御改良により、ビーム調整の手順が簡略化し数クリックで軌道調整が可能になり、また、習熟度の低いオペレータでも容易に軌道調整が可能になった。

論文

Research and development of high intensity beam transport to the target facilities at J-PARC

明午 伸一郎; 大井 元貴; 池崎 清美*; 川崎 智之; 木下 秀孝; 圷 敦*; 西川 雅章*; 福田 真平

Proceedings of 12th International Topical Meeting on Nuclear Applications of Accelerators (AccApp '15), p.255 - 260, 2016/00

At the J-PARC, spallation neutron and muon sources has built at placed at the MLF by using 3-GeVproton beam. By the result of post irradiation examination of the mercury target vessel, damage was found on the surface of the vessel due to the pitting erosion caused by the proton beam. Since the pitting erosion is known to be proportional to the 4th power of the beam current density, peak current density should be kept as low as possible so that beam-flattening system by nonlinear beam optics using octupole magnets was developed. For efficiently beam tuning, a tool was developed by using SAD code system. By the result of the beam study, the peak current density at the target can be reduced by 30% with the present nonlinear optics.

論文

Fabrication process qualification of TF Insert Coil using real ITER TF conductor

尾関 秀将; 礒野 高明; 河野 勝己; 齊藤 徹; 川崎 勉; 西野 克巳; 奥野 清; 木戸 修一*; 仙波 智行*; 鈴木 洋三*; et al.

IEEE Transactions on Applied Superconductivity, 25(3), p.4200804_1 - 4200804_4, 2015/06

 被引用回数:0 パーセンタイル:0(Engineering, Electrical & Electronic)

JAEA is planning performance test of 50 m Toroidal Field (TF) conductor of ITER using Central Solenoid Model Coil (CSMC) test facility at Naka-site in Japan. In order to test the conductor, "TF Insert Coil" (TFIC) is under fabrication in cooperate with Hitachi, Ltd. TFIC is a solenoid coil wound in 1.44 m diameter. It is going to be installed into the bore of CSMC, whose maximum magnetic field is 13 T. The maximum driven current of TFIC is 68 kA. In order to prepare for fabrication of TFIC, several trials of components including windings, removal of Cr plating of the strands, welding and compaction of terminal sleeve were carried out for process qualification. The results of trials showed that the winding dimater satisfied its criterion, the Cr plating was clearly removed using non-woven cloth soaked into HCl solution, the mechanical strengths at 4 K of welds at the terminal were enough. Eventually, the fabrication process qualification of TFIC was completed.

報告書

断面積セット作成プログラムMAIL3.1

須山 賢也; 小室 雄一; 高田 友幸*; 川崎 弘光*; 大内 圭介*

JAERI-Data/Code 98-004, 172 Pages, 1998/02

JAERI-Data-Code-98-004.pdf:4.47MB

本書はSIMCRI, ANISN-JR, KENO IV, KENO V, MULTI-KENO, MULTI-KENO-2そしてMULTI-KENO-3.0のような、輸送計算プログラム用の断面積セットを作成するプログラムMAIL3.1の使用手引書である。MAIL3.1は、1990年に公開されたMAIL3.0の改良版である。MAIL3.1は、MAIL3.0の機能をすべて継承し、以下に示す2つの新しい機能を持つ。1.AMPX形式の断面積セットの作成、2.Hansen-Roach断面積セットの核種識別子の印字

口頭

ITER TF導体を用いたインサート・コイルの製作

尾関 秀将; 礒野 高明; 河野 勝己; 齊藤 徹; 川崎 勉; 西野 克巳; 奥野 清; 木戸 修一*; 仙波 智行*; 鈴木 洋三*; et al.

no journal, , 

国際熱核融合実験炉(ITER)のトロイダル・フィールド(TF)コイル用超伝導導体の性能を評価するため、原子力機構はTFインサート・コイル(TFIC)という直径1.44mで8.875ターンの巻線部を有するTF導体を用いたソレノイドコイルをメーカーとの協力により製作した。TFICは、原子力機構の所有する中心ソレノイドモデルコイル施設の中心ボアに据付され、最大13Tまでの外部磁場環境下で性能試験が行われる。TFICの製作にあたっては、TF導体及びTFICの構造を考慮した製作技術を確立する必要があった。原子力機構では、その製作過程で適用する製作技術について試作を実施し、超伝導素線へのダメージが無く、構造的強度が十分で、かつ、製作プロセスが適切に完了可能であるかという観点から、解体試験及び極低温度を含む温度領域での機械試験を実施した。上記試験の結果から、各製作プロセスである導体巻線・Crめっき除去・電気継手部の溶接・熱処理・導体絶縁のための樹脂含浸工程を確立し、TFインサート・コイルの製作を問題なく完了することができた。本発表では、上記試作結果とTFICの製作プロセスについて報告する。

口頭

1MW大強度核破砕中性子源でのビーム平坦化技術開発

明午 伸一郎; 大井 元貴; 藤森 寛*; 川崎 智之; 西川 雅章; 福田 真平

no journal, , 

J-PARCでは速い繰り返し(25Hz)の3GeV陽子シンクロトロン加速器から出射する1MWの大強度陽子ビームを用いた核破砕中性子源(JSNS)の運転を目指している。中性子源の水銀容器ではビームに誘発されるピッティング損傷が重要な問題となっている。ピッティング損傷はピーク電流密度の4乗に比例するために、ピーク電流密度を低く抑えた運転が求められる。この実現のため、我々は八極電磁石を用いた非線形ビーム光学によるビーム平坦化技術の開発及び、RCSから出射される1MWのビームを用いたプロファイルの制御試験を行ってきた。八極電磁石におけるビームの$$beta$$関数や、位相差が重要な鍵となるが、短時間のビーム調整時間内に効率的に試験・調整を行うことが可能なようにSAD(Strategic Accelerator Design)を用いたツールの開発を行った。その結果、わずか数ショットでビーム診断とビーム平坦化に必要な非線形ビーム光学の調整が可能になった。ツールによるビーム調整により、非線形ビーム光学によりピーク電流は約30%減少できる見込みを得た。

口頭

Measurement of reactor neutrinos using plastic scintillator cube

長谷川 勝一; 今野 智之*; 川崎 建夫*

no journal, , 

新しく開発を進めている、立方体形状のプラスチックシンチレータを用いた原子炉ニュートリノ検出器について報告を行う。原子炉から発生した反電子ニュートリノを逆ベータ崩壊反応を利用することによって測定する検出器であり、現在の開発状況について詳細に報告する。

7 件中 1件目~7件目を表示
  • 1