Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Lin, Z. M.*; Liu, B. X.*; Ming, K. S.*; 徐 平光; Yin, F. X.*; Zheng, S. J.*
Scripta Materialia, 263, p.116692_1 - 116692_7, 2025/07
Complementary layer thickness effects on strength and plasticity in Q235 and SUS304 steels provide a novel strategy to realize high strength and high plasticity of heterogeneous Q235/SUS304 multilayered steel. In this work, the tensile deformation behaviors and fracture characteristics of vacuum hot-rolled Q235/SUS304 multilayered steel with various layer thicknesses ranging from 223 m to 5
m were deeply investigated. The tensile strength improved with the reduction of layer thickness, and the uniform elongation were first increasing and then decreasing with the decrease of layer thickness, and the peak value appeared at the layer thickness of 20
m. Interestingly, the fracture elongation forms a high plateau value within the 10
20
m range. Further analysis reveals that the severe strain localization in the brittle SUS304 thin layers is delayed by the ductile Q235 layers, which is mainly attributed to the different texture evolution and dislocation configuration characteristics during tensile deformation.
Liu, P.-F.*; Li, X.*; Li, J.*; Zhu, J.*; Tong, Z.*; 古府 麻衣子*; 楡井 真実; Xu, J.*; Yin, W.*; Wang, F.*; et al.
National Science Review, 11(12), p.nwae216_1 - nwae216_10, 2024/12
被引用回数:7 パーセンタイル:88.60(Multidisciplinary Sciences)Crystalline solids exhibiting inherently low lattice thermal conductivity () are of great importance in applications such as thermoelectrics and thermal barrier coatings. However,
cannot be arbitrarily low and is limited by the minimum thermal conductivity related to phonon dispersions. In this work, we report the liquid-like thermal transport in a well-ordered crystalline CsAg
Te
, which exhibits an extremely low
value of
0.18 Wm
K
. On the basis of first-principles calculations and inelastic neutron scattering measurements, we find that there are lots of low-lying optical phonon modes at
3.1 meV hosting the avoided-crossing behavior with acoustic phonons. These strongly localized modes are accompanied by weakly bound rattling Ag atoms with thermally induced large amplitudes of vibrations. Using the two-channel model, we demonstrate that coupling of the particle-like phonon modes and the heat-carrying wave-like phonons is essential for understanding the low
, which is heavily deviated from the
temperature dependence of the standard Peierls theory. In addition, our analysis indicates that the soft structural framework with liquid-like motions of the fluctuating Ag atoms is the underlying cause that leads to the suppression of the heat conduction in CsAg
Te
. These factors synergistically account for the ultralow
value. Our results demonstrate that the liquid-like heat transfer could indeed exist in a well-ordered crystal.
Pan, Y.-W.*; Liu, Z.-W.*; Geng, L.-S.*; 保坂 淳; Liu, X.*
Physical Review D, 110(9), p.094004_1 - 094004_8, 2024/11
被引用回数:0 パーセンタイル:0.00(Astronomy & Astrophysics)3つの粒子からなる系が浅い束縛状態を作る可能性を指摘した。これはエフィモフ効果が関わっていると解釈される。
Chen, H. F.*; Liu, B. X.*; 徐 平光; Fang, W.*; Tong, H. C.*; Yin, F. X.*
Journal of Materials Research and Technology, 32, p.3060 - 3069, 2024/09
被引用回数:0 パーセンタイル:0.00(Materials Science, Multidisciplinary)The hot-rolled microstructure of medium Mn steel has coarse grains and severe elemental segregation, resulting in low strength and plasticity. Constructing a multiphase structure, refining the microstructure, and regulating elemental segregation enhance the mechanical properties. In this study, liquid nitrogen treatment created a layered distribution of austenite and martensite. Warm rolling was then used to reduce layer thickness and refine grain structure. After liquid nitrogen and warm rolling treatments, the strength and plasticity of medium Mn steel increased to 1270 MPa and 23.3%, respectively, far exceeding the hot-rolled state (724 MPa, 12.8%). Warm rolling also triggers austenite reverted transformation (ART) and introduces high-density dislocations, further improving austenite stability. This strengthening effect is higher than that from intercritical annealing alone. Improved austenite stability delays the transformation induced plasticity (TRIP) effect, preventing brittle fracture and enhancing deformation coordination between layers, significantly increasing the plastic deformation capacity of medium Mn steel.
Yang, Q.*; Yang, X.*; Wang, Y.*; Fei, Y.*; Li, F.*; Zheng, H.*; Li, K.*; Han, Y.*; 服部 高典; Zhu, P.*; et al.
Nature Communications (Internet), 15, p.7778_1 - 7778_9, 2024/09
被引用回数:6 パーセンタイル:84.39(Multidisciplinary Sciences)明るい一重項励起子と三重項励起子を同時に発現する発光材料は、オプトエレクトロニクス、サイネージ、情報暗号化において大きな可能性を秘めている。しかしながら、高性能の白色発光を実現するためには、蛍光と燐光の寄与が不均衡であることが大きな障害となっている。ここでは、水素結合の協同効果による圧力処理エンジニアリングによって、n--
遷移の混合を実現し、イソフタル酸(IPA)中で三重項状態の発光を7%から40%に高めることで、この課題に対処した。加圧処理したIPAでは、蛍光と燐光のハイブリッドに基づく優れた白色発光が得られ、フォトルミネッセンス量子収率は当初の19%(青色発光)から75%に増加した。その場での高圧IRスペクトル、X線回折、中性子回折から、圧力の上昇に伴い水素結合が連続的に強化されることが明らかになった。さらに、この強化された水素結合は、圧力処理後も常圧条件下まで保持され、バランスの取れた一重項/三重項励起子集団のための効率的な系間交差を目的としたIPAに与え、効率的な白色発光をもたらした。この研究は、有機低分子の三重項状態を明るくするルートを提案するだけでなく、一重項励起子と三重項励起子の比率を調節して、高性能の白色発光を構築するものである。
Zhu, L.*; He, H.*; Naeem, M.*; Sun, X.*; Qi, J.*; Liu, P.*; Harjo, S.; 中島 健次; Li, B.*; Wang, X.-L.*
Physical Review Letters, 133(12), p.126701_1 - 126701_6, 2024/09
被引用回数:1 パーセンタイル:58.36(Physics, Multidisciplinary)It has long been suspected that magnetism could play a vital role in the phase stability of multi- component high-entropy alloys. However, the nature of the magnetic order, if any, has remained elusive. Here, by using elastic and inelastic neutron scattering, we demonstrate evidence of antiferromagnetic order below 80 K and strong spin fluctuations persisting to room temperature in a single-phase face-centered cubic (fcc) CrMnFeCoNi high-entropy alloy. Despite the chemical complexity, the magnetic structure in CrMnFeCoNi can be described as
-Mn-like, with the magnetic moments confined in alternating (001) planes and pointing toward the
111
direction. Combined with first-principles calculation results, it is shown that the antiferromagnetic order and spin fluctuations help stabilized the fcc phase in CrMnFeCoNi high-entropy alloy.
Liu, R.*; 中村 充孝; 蒲沢 和也*; Lu, X.*
Chinese Physics Letters, 41(6), p.067401_1 - 067401_7, 2024/08
被引用回数:0 パーセンタイル:0.00(Physics, Multidisciplinary)Antiferromagnetic spin fluctuation is regarded as the leading driving force for electron pairing in high- superconductors. Here, we use inelastic neutron scattering (INS) to investigate the symmetry and in-plane wave-vector dependence of low-energy spin excitations in uniaxial-strain detwinned FeSe. The low-energy spin excitations (
10 meV) appear mainly at
= (
1, 0) in the superconducting state (
9 K) and the nematic state (
90 K), confirming the constant C
rotational symmetry and ruling out the C
mode at
3 meV reported in a prior INS study. Moreover, our results reveal an isotropic spin resonance in the superconducting state, which is consistent with the
wave pairing symmetry. At slightly higher energy, low-energy spin excitations become highly anisotropic.
Wang, S.*; Wang, J.*; Zhang, S.*; Wei, D.*; Chen, Y.*; Rong, X.*; Gong, W.; Harjo, S.; Liu, X.*; Jiao, Z.*; et al.
Journal of Materials Science & Technology, 185, p.245 - 258, 2024/06
被引用回数:13 パーセンタイル:98.23(Materials Science, Multidisciplinary)Nanoprecipitates and nanoscale retained austenite (RA) with suitable stability play crucial roles in determining the yield strength (YS) and ductility of ultrahigh strength steels (UHSSs). However, owing to the kinetics incompatibility between nanoprecipitation and austenite reversion, it is highly challenging to simultaneously introduce high-density nanoprecipitates and optimized RA in UHSSs. In this work, through the combination of austenite reversion treatment (ART) and subsequent flash austenitizing (FA), nanoscale chemical heterogeneity was successfully introduced into a low-cost UHSS prior to the aging process. This chemical heterogeneity involved the enrichment of Mn and Ni in the austenite phase. The resulting UHSS exhibited dual-nanoprecipitation of Ni(Al,Mn) and (Mo,Cr) C and nanoscale austenite stabilized via Mn and Ni enrichment. The hard martensitic matrix strengthened by high-density dual-nanoprecipitates constrains the plastic deformation of soft RA with a relatively low fraction, and the presence of relatively stable nanoscale RA with adequate Mn and Ni enrichment leads to a marginal loss in YS but keeps a persistent transformation-induced plasticity (TRIP) effect. As a result, the newly-developed UHSS exhibits an ultrahigh YS of 1.7 GPa, an ultimate tensile strength (UTS) of 1.8 GPa, a large uniform elongation (UE) of 8.5 percent, and a total elongation (TE) of 13 percent. The strategy of presetting chemical heterogeneity to introduce proper metastable phases before aging can be extended to other UHSSs and precipitation-hardened alloys.
Baccou, J.*; Glantz, T.*; Ghione, A.*; Sargentini, L.*; Fillion, P.*; Damblin, G.*; Sueur, R.*; Iooss, B.*; Fang, J.*; Liu, J.*; et al.
Nuclear Engineering and Design, 421, p.113035_1 - 113035_16, 2024/05
被引用回数:6 パーセンタイル:97.67(Nuclear Science & Technology)In the Best-Estimate Plus Uncertainty (BEPU) framework, the use of best-estimate code requires to go through a Verification, Validation and Uncertainty Quantification process (VVUQ). The relevance of the experimental data in relation to the physical phenomena of interest in the VVUQ process is crucial. Adequacy analysis of selected experimental databases addresses this problem. The outcomes of the analysis can be used to select a subset of relevant experimental data, to encourage designing new experiments or to drop some experiments from a database because of their substantial lack of adequacy. The development of a specific transparent and reproducible approach to analyze the relevance of experimental data for VVUQ still remains open and is the topic of this contribution. In this paper, the concept of adequacy initially introduced in the OECD/NEA SAPIUM (Systematic APproach for model Input Uncertainty quantification Methodology) activity is formalized. It is defined through two key properties, called representativeness and completeness, that allows considering the multifactorial dimension of the adequacy problem. A new systematic approach is then proposed to analyze the adequacy of a set of experimental databases. It relies on the introduction of two sets of criteria to characterize representativeness and completeness and on the use of multi-criteria decision analysis method to perform the analysis. Finally, the approach is applied in the framework of the new OECD/NEA ATRIUM activity which includes a set of practical IUQ exercises in thermal-hydraulics to test the SAPIUM guideline in determining input uncertainties and forward propagating them on an application case. It allows evaluating the adequacy of eight experimental databases coming from the Super Moby-dick, Sozzi-Sutherland and Marviken experiments and identifying the most adequate ones.
Li, J.*; Li, X.*; Zhang, Y.*; Zhu, J.*; Zhao, E.*; 古府 麻衣子; 中島 健次; Avdeev, M.*; Liu, P.-F.*; Sui, J.*; et al.
Applied Physics Reviews (Internet), 11(1), p.011406_1 - 011406_8, 2024/03
被引用回数:7 パーセンタイル:94.53(Physics, Applied)The desire for intrinsically low lattice thermal conductivity () in thermoelectrics motivates numerous efforts on understanding the microscopic mechanisms of heat transport in solids. Here, based on theoretical calculations, we demonstrate that
-MgAgSb hosts low-energy localized phonon bands and avoided crossing of the rattler modes, which coincides with the inelastic neutron scattering result. Using the two-channel lattice dynamical approach, we find, besides the conventional contribution (
70% at 300 K) from particlelike phonons propagating, the coherence contribution dominated by the wavelike tunneling of phonons accounts for
30% of total
at 300 K. By considering dual contributions, our calculated room-temperature
of 0.64 Wm
K
well agrees with the experimental value of 0.63 Wm
K
. More importantly, our computations give a nonstandard
dependence, perfectly explaining the abnormal temperature-trend of
in experiment for
-MgAgSb. By molecular dynamics simulation, we reveal that the structure simultaneously has soft crystalline sublattices with the metavalent bonding and fluctuating liquid-like sublattices with thermally induced large amplitude vibrations. These diverse forms of chemical bonding arouse mixed part-crystal part-liquid state, scatter strongly heat-carrying phonons, and finally produce extremely low
. The fundamental research from this study will accelerate the design of ultralow-
materials for energy-conversion applications.
Li, X.*; Zhu, R.*; Xin, J.*; Luo, M.*; Shang, S.-L.*; Liu, Z.-K.*; Yin, C.*; 舟越 賢一*; Dippenaar, R. J.*; 肥後 祐司*; et al.
CALPHAD; Computer Coupling of Phase Diagrams and Thermochemistry, 84, p.102641_1 - 102641_6, 2024/03
被引用回数:0 パーセンタイル:0.00(Thermodynamics)The phase transformations and pressure-volume dependencies of the Ti-45Al alloy with respect to pressure have been investigated by means of in-situ observation using multi anvil-type high-pressure devices and synchrotron radiation. Under hydrostatic compression from 0 to 10.1 GPa, about 2.3 vol. % of transforms continuously to
2. Lattice parameters as well as volume fractions of these two phases have been determined as a function of pressure. Bulk moduli estimated using Birch-Murnaghan's equation of state are 148 GPa for the
phase, 138 GPa for the
2 phase, and 149 GPa for their two-phase mixture of Ti-45Al alloy. First-principles have also applied to investigate bulk moduli of two single phases, and the deviation between calculations and measurements is discussed and attributed to mainly phase transformation. The presently study provides useful insights into thermodynamics of
2 and
phases under high pressure.
Linh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Duguet, T.*; Gmez-Ramos, M.*; Holt, J. D.*; Hu, B. S.*; et al.
Physical Review C, 109(3), p.034312_1 - 034312_15, 2024/03
被引用回数:1 パーセンタイル:68.69(Physics, Nuclear)理化学研究所RIビームファクトリーにて中性子過剰核Arビームからの1中性子ノックアウト反応実験を行い、
Arのエネルギー準位および分光学的因子を導出した。特に、第一励起状態の
への分光学的因子が大きいことから、始状態の
Arの基底状態において中性子が
軌道を多く占めていることがわかった。これは、中性子数32がよい魔法数として知られる
Caとは異なった性質であり、カルシウムからアルゴンへと陽子が2個減ることで閉殻構造が大きく崩れることが明らかになった。
Li, C.*; Fang, W.*; Yu, H. Y.*; Peng, T.*; Yao, Z. T.*; Liu, W. G.*; Zhang, X.*; 徐 平光; Yin, F.*
Materials Science & Engineering A, 892, p.146096_1 - 146096_11, 2024/02
被引用回数:3 パーセンタイル:73.35(Nanoscience & Nanotechnology)The quasi-static superelastic responses and hierarchical martensite transformation from body-centered cubic (BCC) to face-centered cubic (FCC) under dynamic impact in FeMn
Al
Ni
Ti
alloys were investigated. Polycrystalline and oligocrystalline alloys were produced through solution heat treatment and cyclic heat treatment processes, respectively. The results show the volume fraction of residual martensite for oligocrystalline alloys is lower, which exhibits better superelastic responses compared with polycrystalline alloys. Dynamic impact tests indicate that, despite the weakening of the grain boundary strengthening effect, the ultimate strength of the oligocrystalline alloys closely matches that of the polycrystalline alloys under dynamic impact. The martensite transformation of the FeMnAlNiTi alloy is characterized as hierarchical under dynamic impact, and increasing strain rates and grain sizes can enhance the BCC
FCC martensite transformation, resulting in higher martensite phase fractions for oligocrystalline alloys. The increase in ultimate strength is attributed to the dynamic Hall-Petch effect introduced by more martensite phase interfaces under dynamic impact.
Li, P. J.*; Beaumel, D.*; Lee, J.*; Assi, M.*; Chen, S.*; Franchoo, S.*; Gibelin, J.*; Hammache, F.*; Harada, T.*; 延与 佳子*; et al.
Physical Review Letters, 131(21), p.212501_1 - 212501_7, 2023/11
被引用回数:14 パーセンタイル:91.25(Physics, Multidisciplinary)Beのクラスター構造を(
)反応を用いて調査した。三重微分断面積が実験的に測定され、Tohsaki-Horiuchi-Schuck-R
pke波動関数の方法や反対称化分子動力学を用いた歪曲波インパルス近似計算と比較した。実験データと理論計算の顕著な一致が確認され、
Beの比較的コンパクトな分子状態を確認した。
Chen, S.*; Browne, F.*; Doornenbal, P.*; Lee, J.*; Obertelli, A.*; 角田 佑介*; 大塚 孝治*; 茶園 亮樹*; Hagen, G.*; Holt, J. D.*; et al.
Physics Letters B, 843, p.138025_1 - 138025_7, 2023/08
被引用回数:6 パーセンタイル:84.52(Astronomy & Astrophysics)Scからの1陽子ノックアウト反応を用いて、
Caと
Caのガンマ崩壊を観測した。
Caでは1456(12)keVの
線遷移が、
Caでは1115(34)keVの遷移が観測された。どちらの遷移も暫定的に
と割り当てられた。有効核子間相互作用をわずかに修正した広い模型空間での殻模型計算では、
準位エネルギー、2中性子分離エネルギー、反応断面積が実験とよく一致し、N=34閉殻の上に新しい殻が形成されていることを裏付けた。その構成要素である
と
軌道はほぼ縮退しており、これは
Caが二重魔法核である可能性を排除し、Ca同位体のドリップラインを
Caあるいはそれ以上にまで広げる可能性がある。
Fang, Y.*; Kong, L.*; Wang, R.*; Zhang, Z.*; Li, Z.*; Wu, Y.*; Bu, K.*; Liu, X.*; Yan, S.*; 服部 高典; et al.
Materials Today Physics (Internet), 34, p.101083_1 - 101083_7, 2023/05
被引用回数:8 パーセンタイル:69.27(Materials Science, Multidisciplinary)層状ファンデルワールスハライドは、外部圧力に対して特に敏感であるため、目的とする性質を持つ構造にチューンすることが可能となる。一方で、圧力に非常に敏感であるという特性は、同時に目的とする機能の実現に有害な相転移や格子歪みを引き起こす可能性があるためその操作は依然として困難である。この研究では、層状RhI結晶が持つ極めて弱い層間結合と高い機能可変性を観察した。5GPaという適度な圧力をかけると圧力誘起相転移が起こり、積層構造に変化が現れた。驚くべきことに、この相転移は、圧力に対してほぼ直線的なバンドギャップ減少という傾向に影響を与えなかった。また、より高い圧力では、1.3eVの赤方偏移というかなり大きな調整幅を伴う金属相が観測された。さらに、RhI
のキャリア濃度は30GPaで4桁増加し、光電流は7.8GPaで5桁増加することが確認された。これらの結果は、ファンデルワールスハライドの層状構造という特異な特徴を生かした探索、調整、理解のための新たな機会を創出し、原子レベルの薄さを持つマテリアルバイデザインに基づく将来のデバイスとして有望である。
Zhang, T.*; Yao, Y.*; 守田 幸路*; Liu, X.*; Liu, W.*; 今泉 悠也; 神山 健司
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
The in-pile EAGLE ID1 test was conducted by Japan Atomic Energy Agency to demonstrate the effectiveness of the fuel assembly with an internal duct structure during a core disruptive accident in a sodium-cooled fast reactor. In this study, a new computational fluid dynamics code based on the fully Lagrangian particle method was developed for the purpose of clarifying the failure mechanism of the inner duct wall of FAIDUS. The three-dimensional simulation of the ID1 test was performed to analyze a series of thermal hydraulic behaviors leading up to duct wall failure for a computational domain that included six fuel pins. The simulations reasonably reproduced the heat transfer characteristics observed in the test, showing that the local contact of liquid steel with high thermal conductivity with the duct wall greatly enhances the heat transfer from the nuclear heating fuel to the duct wall. The results support the validity of the conclusions of our analytical study regarding the molten pool-to-duct wall heat transfer mechanism that caused the thermal failure of the duct wall.
Cao, Y.*; Zhou, H.*; Khmelevskyi, S.*; Lin, K.*; Avdeev, M.*; Wang, C.-W.*; Wang, B.*; Hu, F.*; 加藤 健一*; 服部 高典; et al.
Chemistry of Materials, 35(8), p.3249 - 3255, 2023/04
被引用回数:2 パーセンタイル:25.33(Chemistry, Physical)静水圧や化学圧力は、結晶構造を変化させる効率的な刺激であり、材料科学において電気的、磁気的特性のチューニングによく利用されている。しかし、化学圧力は定量化が困難であり、これら両者の定量的な対応関係はまだよくわかっていない。本研究では、負の熱膨張(NTE)を持つ永久磁石の候補である金属間化合物を調べた。放射光X線その場観察により、AlをドープしたHoFe
に負の化学圧力があることを明らかにし、単位セル体積の温度・圧力依存性を用いそれを定量的に評価した。また、磁化測定と中性子回折測定を組み合わせることで、磁気秩序に対する化学圧力と静水圧の違いを比較した。興味深いことに、圧力はNTEの抑制と増強を制御するために使用することができた。電子状態計算から、圧力がFermiレベル(EF)に対する主要バンドの上部に影響を与えたことを示しており、これは磁気安定性に影響を与え、それが磁気とNTEを調節する上で重要な役割を果たしていることがわかった。本研究は、圧力の影響を理解し、それを利用して機能性材料の特性を制御する良い例を示している。
Pohl, T.*; Sun, Y. L.*; Obertelli, A.*; Lee, J.*; Gmez-Ramos, M.*; 緒方 一介*; 吉田 数貴; Cai, B. S.*; Yuan, C. X.*; Brown, B. A.*; et al.
Physical Review Letters, 130(17), p.172501_1 - 172501_8, 2023/04
被引用回数:11 パーセンタイル:88.84(Physics, Multidisciplinary)大きなフェルミ面非対称性を持つ陽子過剰なO原子核からの100MeV/nucleonでの陽子による陽子・中性子除去反応について報告した。この結果は、quasi-freeノックアウト反応、非弾性散乱、核子移行反応を含む複数の反応機構の定量的寄与を初めて示すものである。このようなエネルギー領域では通常無視される非弾性散乱と核子移行の寄与が、弱束縛陽子と強束縛中性子の除去反応断面積にそれぞれ約50%と30%寄与していることが示された。
間所 寛; 山下 拓哉; Gaus-Liu, X.*; Cron, T.*; Fluhrer, B.*; 佐藤 一憲; 溝上 伸也*
Nuclear Technology, 209(2), p.144 - 168, 2023/02
被引用回数:2 パーセンタイル:31.89(Nuclear Science & Technology)Since the reactor pressure vessel (RPV) lower head failure determines the subsequent ex-vessel accident progression, it is a key issue to understand the accident progression of Fukushima Daiichi Nuclear Power Station (1F). The RPV failure is largely affected by thermal loads on the vessel wall and thus it is inevitable to understand thermal behavior of molten metallic pool with co- existence of solid oxide fuel debris. In the past decades, numerous experiments have been conducted to investigate a homogeneous molten pool behavior. Few experiments, however, addresses the melting and heat transfer process of debris bed consisted of materials with different melting temperatures. LIVE-J2 experiment aimed to provide the experimental data on a solid-liquid mixture pool in a simulated RPV lower head under various conditions. The extensive measurements of the melt temperature indicate the heat transfer regimes in a solid-liquid mixture pool. The test results showed that the conductive heat transfer was dominant during the steady state along the vessel wall boundary and that convective heat transfer takes place inside the mixture pool. Besides the experimental performance, the test case was numerically simulated by using ANSYS Fluent. The simulation results generally agree with the measured experimental data. The flow regime and transient melt evolution were able to be estimated by the calculated velocity field and the crust thickness, respectively.