Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Li, X.*; Zhu, R.*; Xin, J.*; Luo, M.*; Shang, S.-L.*; Liu, Z.-K.*; Yin, C.*; 舟越 賢一*; Dippenaar, R. J.*; 肥後 祐司*; et al.
CALPHAD; Computer Coupling of Phase Diagrams and Thermochemistry, 84, p.102641_1 - 102641_6, 2024/03
被引用回数：0 パーセンタイル：0.00(Thermodynamics)The phase transformations and pressure-volume dependencies of the Ti-45Al alloy with respect to pressure have been investigated by means of in-situ observation using multi anvil-type high-pressure devices and synchrotron radiation. Under hydrostatic compression from 0 to 10.1 GPa, about 2.3 vol. % of 
transforms continuously to 
2. Lattice parameters as well as volume fractions of these two phases have been determined as a function of pressure. Bulk moduli estimated using Birch-Murnaghan's equation of state are 148 GPa for the phase, 138 GPa for the 2 phase, and 149 GPa for their two-phase mixture of Ti-45Al alloy. First-principles have also applied to investigate bulk moduli of two single phases, and the deviation between calculations and measurements is discussed and attributed to mainly phase transformation. The presently study provides useful insights into thermodynamics of 2 and phases under high pressure.
Hwang, Y.*; Puebla, J.*; 近藤 浩太*; Gonzalez-Ballestero, C.*; 一色 弘成*; S
nchez Mu
oz, C.*; Liao, L.*; Chen, F.*; Luo, W.*; 前川 禎通*; et al.
Physical Review Letters, 132(5), p.056704_1 - 056704_7, 2024/01
被引用回数：14 パーセンタイル：96.23(Physics, Multidisciplinary)Here, we report the observation of strong coupling between magnons and surface acoustic wave (SAW) phonons in a thin CoFeB film constructed in an on-chip SAW resonator by analyzing SAW phonon dispersion anticrossings. We employ a nanostructured SAW resonator design that, in contrast to conventional SAW resonators, allows us to enhance shear-horizontal strain. Crucially, this type of strain couples strongly to magnons. Our device design provides the tunability of the film thickness with a fixed phonon wavelength, which is a departure from the conventional approach in strong magnon-phonon coupling research. We detect a monotonic increase in the coupling strength by expanding the film thickness, which agrees with our theoretical model. Our work offers a significant way to advance fundamental research and the development of devices based on magnon-phonon hybrid quasiparticles.
Wang, Q.*; Ma, N.*; Huang, W.*; Shi, J.*; Luo, X.-T.*; 冨高 宙*; 諸岡 聡; 渡邊 誠*
Materials Research Letters (Internet), 11(9), p.742 - 748, 2023/09
被引用回数：2 パーセンタイル：26.77(Materials Science, Multidisciplinary)Cold spray (CS) has emerged as a representative of solid-state additive manufacturing (AM) via supersonic impact. It enables a high deposition rate of solid-state microparticles. Delamination, however, tends to occur when depositing too thick; this remains to be conquered. Here, a CS-like process, warm spray (WS), was presented. Interestingly, it was found that the appropriate increase in particle temperature can effectively reduce the residual stress amplitude, relieving the concentrated tensile stress and safeguarding the additively manufactured components from interfacial delamination even when depositing too thick. The key role of temperature on delamination was identified in solid-state AM via supersonic impact.
Luo, M.-Y.*; Lam, T.-N.*; Wang, P.-T.*; Tsou, N.-T.*; Chang, Y.-J.*; Feng, R.*; 川崎 卓郎; Harjo, S.; Liaw, P. K.*; Yeh, A.-C.*; et al.
Scripta Materialia, 210, p.114459_1 - 114459_7, 2022/03
被引用回数：23 パーセンタイル：89.56(Nanoscience & Nanotechnology)The effect of grain size on strain-controlled low-cycle fatigue (LCF) properties in the CoCrFeMnNi high-entropy alloys (HEAs) was investigated towards the distinct microstructural developments during cyclic loading at a strain amplitude of 
1.0%. A much more prominent secondary cyclic hardening (SCH) behavior at the final deformation stage was observed in the fine-grained (FG) than in the coarse-grained (CG) CoCrFeMnNi. In-situ neutron-diffraction and microscopic examination, strongly corroborated by molecular dynamic (MD) simulations, indicated that dislocation activities from planar slip to wavy slip-driven subgrain structures within the grains acted as the primary cyclic-deformation behaviors in the FG CoCrFeMnNi. Differently observed in the cyclic behavior of the CG CoCrFeMnNi was due to a transition from the planar dislocation slip to twinning.
Lam, T.-N.*; Luo, M.-Y.*; 川崎 卓郎; Harjo, S.; Jain, J.*; Lee, S.-Y.*; Yeh, A.-C.*; Huang, E.-W.*
Crystals (Internet), 12(2), p.157_1 - 157_9, 2022/02
被引用回数：19 パーセンタイル：95.55(Crystallography)In this research, we systematically investigated equiatomic CoCrFeNi and CoCrFeMnNi high-entropy alloys (HEAs). Both of these HEA systems are single-phase, face-centered-cubic (FCC) structures. Specifically, we examined the tensile response in as-cast quaternary CoCrFeNi and quinary CoCrFeMnNi HEAs at room temperature. Compared to CoCrFeNi HEA, the elongation of CoCrFeMnNi HEA was 14% lower, but the yield strength and ultimate tensile strength were increased by 17% and 6%, respectively. The direct real-time evolution of structural defects during uniaxial straining was acquired via in situ neutron-diffraction measurements. The dominant microstructures underlying plastic deformation mechanisms at each deformation stage in as-cast CoCrFeNi and CoCrFeMnNi HEAs were revealed using the Convolutional Multiple Whole Profile (CMWP) software for peak-profile fitting. The possible mechanisms are reported.
(As
P
) superconductorHu, D.*; Yin, Z.*; Zhang, W.*; Ewings, R. A.*; 池内 和彦*; 中村 充孝; Roessli, B.*; Wei, Y.*; Zhao, L.*; Chen, G.*; et al.
Physical Review B, 94(9), p.094504_1 - 094504_7, 2016/09
被引用回数：20 パーセンタイル：63.00(Materials Science, Multidisciplinary)最適Pドープされた超伝導体BaFe(AsP) (T
=30K)におけるスピン励起の温度及びエネルギー依存性が非弾性中性子散乱実験を使って調べられた。我々の実験結果は密度汎関数理論や動的平均場理論で予想される計算結果と矛盾しておらず、BaFe(AsP)における平均プニクトゲン高さの減少が、電子相関の強さを弱め、磁気励起の有効バンド幅の増加に寄与することを示唆している。
Li, B.; Luo, X. H.*; Wang, H.*; Ren, W. J.*; Yano, S.*; Wang, C.-W.*; Gardner, J. S.*; Liss, K.-D.*; Miao, P.*; Lee, S.-H.*; et al.
Physical Review B, 93(22), p.224405_1 - 224405_6, 2016/06
被引用回数：56 パーセンタイル：87.63(Materials Science, Multidisciplinary)Competition between ferromagnetic and antiferromagnetic phases on frustrated lattices in hexagonal Laves phase compound Hf
Ta
Fe is investigated by using neutron diffraction as a function of temperature and magnetic fields and density-functional-theory calculations. At 325 K, the compound orders into the 120
frustrated antiferromagnetic state with well-reduced magnetic moment and an in-plane lattice contraction simultaneously sets in. With further cooling down, however, the accumulated distortion in turn destabilizes this susceptible frustrated structure. The frustration is completely relieved at 255 K when the first-order transition to the ferromagnetic state takes place, where a colossal negative volumetric thermal expansion, 
/K, is obtained. Meanwhile, the antiferromagnetic state can be suppressed by few Tesla magnetic fields, which results in a colossal positive magnetostriction. Such delicate competition is attributed to the giant magnetic fluctuation inherent in the frustrated antiferromagnetic state. Therefore, the magnetoelastic instability is approached even under a small perturbation.
Ding, F.*; Luo, G.-N.*; Pitts, R.*; Litnovsky, A.*; Gong, X.*; Ding, R.*; Mao, H.*; Zhou, H.*; Wampler, W. R.*; Stangeby, P. C.*; et al.
Journal of Nuclear Materials, 455(1-3), p.710 - 716, 2014/12
被引用回数：28 パーセンタイル：88.49(Materials Science, Multidisciplinary)A movable material probe system (Material and Plasma Evaluation System: MAPES) with an independent pumping system and a sample exchange chamber has been developed and installed on a horizontal port of the EAST tokamak for studies of plasma material interaction (PMI). In the 2012 experimental campaign, deposition and erosion were studied for three samples: mock-up of the outer first wall panels (FWPs) in ITER, castellated tungsten, and molybdenum mirrors. The FWPs with carbon deposition layer were exposed to helium plasmas. The maximum erosion rate of the carbon was valuated to be 8 nm/s. The castellated tungsten with rectangular cells and roof-like shaped cells was exposed to deuterium plasmas to compare amount of deposits on the gap surface. The amount of carbon and boron impurities on the gap surface of the roof-like shaped cells were reduced to less than 30% compared with that of the rectangular cells. The molybdenum mirrors of which protective ducts are installed in front were exposed to deuterium plasmas in order to investigate effects of length of the ducts. It was found that the reflectivity of the mirrors with 60 mm-long protective ducts is kept the initial reflectivity.
