Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yasumiishi, Misa*; Masoudi, P.*; Nishimura, Taku*; Ochi, Kotaro; Ye, X.*; Aldstadt, J.*; Komissarov, M.*
Radiation Measurements, 168, p.106978_1 - 106978_16, 2023/11
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)In this study, we surveyed air dose rates using hand-held and backpack-type scintillators in a forest of deciduous and evergreen trees in Fukushima Prefecture, Japan. The effects of topographic features on air dose rates were examined using multivariate adaptive regression splines (MARS) against five selected topographic parameters. The air dose rates were distributed unevenly in the forest, and air dose rates varied by more than 1
Sv/h as a function of time, likely owing to ground wetness etc. The effect of different topographic parameters varied between survey dates. The MARS model predictions with all topographic parameters yielded an R
of 0.54 or higher. To discuss whether the effect of topography on air dose rates and soil contamination levels is consistent, air dose rates measured in the field were compared with those estimated from the depth profile of radiocesium in soil. Most air dose rates estimated from the soil samples were in the range of field measurements.
and 
shell gap for Ti and V by the first high-precision multireflection time-of-flight mass measurements at BigRIPS-SLOWRIIimura, Shun*; Rosenbusch, M.*; Takamine, Aiko*; Tsunoda, Yusuke*; Wada, Michiharu*; Chen, S.*; Hou, D. S.*; Xian, W.*; Ishiyama, Hironobu*; Yan, S.*; et al.
Physical Review Letters, 130(1), p.012501_1 - 012501_6, 2023/01
Times Cited Count：5 Percentile：94.66(Physics, Multidisciplinary)Okutsu, Kenichi*; Yamashita, Takuma*; Kino, Yasushi*; Nakashima, Ryota*; Miyashita, Konan*; Yasuda, Kazuhiro*; Okada, Shinji*; Sato, Motoyasu*; Oka, Toshitaka; Kawamura, Naritoshi*; et al.
Fusion Engineering and Design, 170, p.112712_1 - 112712_4, 2021/09
Times Cited Count：3 Percentile：45.99(Nuclear Science & Technology)A muonic molecule which consists of two hydrogen isotope nuclei (deuteron (d) or tritium (t)) and a muon decays immediately via nuclear fusion and the muon will be released as a recycling muon, and start to find another hydrogen isotope nucleus. The reaction cycle continues until the muon ends up its lifetime of 2.2 s. Since the muon does not participate in the nuclear reaction, the reaction is so called a muon catalyzed fusion (CF). The recycling muon has a particular kinetic energy (KE) of the muon molecular orbital when the nuclear reaction occurs. Since the KE is based on the unified atom limit where distance between two nuclei is zero. A precise few-body calculation estimating KE distribution (KED) is also in progress, which could be compared with the experimental results. In the present work, we observed recycling muons after CF reaction.
Yamashita, Takuma*; Okutsu, Kenichi*; Kino, Yasushi*; Nakashima, Ryota*; Miyashita, Konan*; Yasuda, Kazuhiro*; Okada, Shinji*; Sato, Motoyasu*; Oka, Toshitaka; Kawamura, Naritoshi*; et al.
Fusion Engineering and Design, 169, p.112580_1 - 112580_5, 2021/08
Times Cited Count：3 Percentile：45.99(Nuclear Science & Technology)A muon () having 207 times larger mass of electron and the same charge as the electron has been known to catalyze a nuclear fusion between deuteron (d) and triton (t). These two nuclei are bound by and form a muonic hydrogen molecular ion, dt. Due to the short inter-nuclear distance of dt, the nuclear fusion, d +t
+ n + 17.6 MeV, occurs inside the molecule. This reaction is called muon catalyzed fusion (CF). Recently, the interest on CF is renewed from the viewpoint of applications, such as a source of high-resolution muon beam and mono-energetic neutron beam. In this work, we report a time evolution calculation of CF in a two-layered hydrogen isotope target.
Nancekievill, M.*; Espinosa, J.*; Watson, S.*; Lennox, B.*; Jones, A.*; Joyce, M. J.*; Katakura, Junichi*; Okumura, Keisuke; Kamada, So*; Kato, Michio*; et al.
Sensors (Internet), 19(20), p.4602_1 - 4602_16, 2019/10
Times Cited Count：7 Percentile：38.52(Chemistry, Analytical)In order to contribute to fuel debris search at the Fukushima Daiichi Nuclear Power Station, we developed a system to search for submerged fuel debris by mounting a sonar on the remotely operated vehicle (ROV). The system can obtain 3D images of submerged fuel debris in real time by using the positioning system, depth sensor, and collected sonar data. As a demonstration test, a simulated fuel debris was installed at the bottom of the water tank facility at the Naraha Center for Remote Control Technology Development, and a 3D image was successfully obtained.
Kaji, Yoshiyuki; Nemoto, Yoshiyuki; Nagatake, Taku; Yoshida, Hiroyuki; Tojo, Masayuki*; Goto, Daisuke*; Nishimura, Satoshi*; Suzuki, Hiroaki*; Yamato, Masaaki*; Watanabe, Satoshi*
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 8 Pages, 2019/05
In this research program, cladding oxidation model in SFP accident condition, and numerical simulation method to evaluate capability of spray cooling system which was deployed for spent fuel cooling during SFP accident, have been developed. These were introduced into the severe accident codes such as MAAP and SAMPSON, and SFP accident analyses were conducted. Analyses using Computational Fluid Dynamics (CFD) code were conducted as well for the comparison with SA code analyses and investigation of detail in the SFP accident. In addition, three-dimensional criticality analysis method was developed as well, and safer loading pattern of spent fuels in pool was investigated.
hydrogen partitioning controlToda, Hiroyuki*; Yamaguchi, Masatake; Matsuda, Kenji*; Shimizu, Kazuyuki*; Hirayama, Kyosuke*; Su, H.*; Fujihara, Hiro*; Ebihara, Kenichi; Itakura, Mitsuhiro; Tsuru, Tomohito; et al.
Tetsu To Hagane, 105(2), p.240 - 253, 2019/02
Times Cited Count：0 Percentile：0(Metallurgy & Metallurgical Engineering)no abstracts in English
Strasser, P.*; Abe, Mitsushi*; Aoki, Masaharu*; Choi, S.*; Fukao, Yoshinori*; Higashi, Yoshitaka*; Higuchi, Takashi*; Iinuma, Hiromi*; Ikedo, Yutaka*; Ishida, Katsuhiko*; et al.
EPJ Web of Conferences, 198, p.00003_1 - 00003_8, 2019/01
Times Cited Count：13 Percentile：99.06(Quantum Science & Technology)Kamada, So*; Kato, Michio*; Nishimura, Kazuya*; Nancekievill, M.*; Watson, S.*; Lennox, B.*; Jones, A.*; Joyce, M. J.*; Okumura, Keisuke; Katakura, Junichi*
Progress in Nuclear Science and Technology (Internet), 6, p.199 - 202, 2019/01
As a technology development to investigate the distribution of submerged fuel debris in the primary containment vessel (PCV) of the Fukushima Daiichi Nuclear Power Station, we are conducting development experiments of sonar system to be mounted in a compact ROV. The experiments were conducted in two types of water tanks with different depths, simulating the PCV, using sonar with different sizes, ultrasonic frequencies, and beam scanning method, and simulated fuel debris. As a result, we characterized the shape discrimination performance of the simulated debris, and the noise due to multi-path in narrow closed space.
Nancekievill, M.*; Jones, A. R.*; Joyce, M. J.*; Lennox, B.*; Watson, S.*; Katakura, Junichi*; Okumura, Keisuke; Kamada, So*; Kato, Michio*; Nishimura, Kazuya*
IEEE Transactions on Nuclear Science, 65(9), p.2565 - 2572, 2018/09
Times Cited Count：25 Percentile：91.9(Engineering, Electrical & Electronic)In order to contribute to the development of technology to search fuel debris submerged in water inside the primary containment vessel of the Fukushima Daiichi Nuclear Power Station, we are developing a remotely operated vehicle (ROV) system equipped with a compact radiation detector and sonar. A cerium bromide (CeBr
) scintillator detector for dose rate monitoring and 
ray spectroscopy was integrated into ROV and experimentally validated with a 
Cs source, both in the conditions of laboratory and submerged. In addition, the ROV combined with the IMAGENEX 831L sonar could characterize the shape and size of a simulated fuel debris at the bottom of the water pool facility.
-ray spectra obtained via aerial radiation monitoring using an unmanned helicopterOchi, Kotaro; Sasaki, Miyuki; Ishida, Mutsushi*; Hamamoto, Shoichiro*; Nishimura, Taku*; Sanada, Yukihisa
International Journal of Environmental Research and Public Health, 14(8), p.926_1 - 926_14, 2017/08
Times Cited Count：4 Percentile：22.71(Environmental Sciences)After the Fukushima Daiichi Nuclear Power Plant accident, the vertical distribution of radiocesium in soil has been investigated to better understand the behavior of radiocesium in the environment. The typical method used for measuring the vertical distribution of radiocesium is troublesome because it requires collection and measurement of the activity of soil samples. In this study, we established a method of estimating the vertical distribution of radiocesium by focusing on the characteristics of -ray spectra obtained via aerial radiation monitoring using an unmanned helicopter. In this method, the change in the ratio of direct rays to scattered rays at various depths in the soil was utilized to quantify the vertical distribution of radiocesium. The results show a positive correlation between the abovementioned and the actual vertical distributions of radiocesium measured in the soil samples.
Nancekievill, M.*; Jones, A. R.*; Joyce, M. J.*; Lennox, B.*; Watson, S.*; Katakura, Junichi*; Okumura, Keisuke; Kamada, So*; Kato, Michio*; Nishimura, Kazuya*
Proceedings of 5th International Conference on Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA 2017) (USB Flash Drive), 6 Pages, 2017/06
We are developping a submersible ROV system, coupled with radiation detectors aimed at mapping the interior of the reactors at the Fukushima Daiichi Nuclear Power Station. To map the -ray intensity environment a cerium bromide (CeBr) inorganic scintillator detector sensitive to -rays has been incorporated into the ROV to measure -ray intensity and identify radioactive isotopes. The ROV is a cylindrical shape with a diameter of about 150 mm, and it have two end caps of five pumps each allowing control of the ROV in 5 degree of freedom. It is possible to directly replace the CeBr detector with a single crystal chemical vapour deposition (CVD) neutron detector with a 
Li convertor foil that is capable of mapping the thermal neutron flux.
Strasser, P.*; Aoki, Masaharu*; Fukao, Yoshinori*; Higashi, Yoshitaka*; Higuchi, Takashi*; Iinuma, Hiromi*; Ikedo, Yutaka*; Ishida, Katsuhiko*; Ito, Takashi; Iwasaki, Masahiko*; et al.
Hyperfine Interactions, 237(1), p.124_1 - 124_9, 2016/12
Times Cited Count：7 Percentile：90.97(Physics, Atomic, Molecular & Chemical)Abe, Hiroshi; Shimomura, Takuya; Tokuhira, Shinnosuke*; Shimada, Yukihiro*; Takenaka, Yusuke*; Furuyama, Yuta*; Nishimura, Akihiko; Uchida, Hirohisa*; Daido, Hiroyuki; Oshima, Takeshi
Proceedings of 7th International Congress on Laser Advanced Materials Processing (LAMP 2015) (Internet), 4 Pages, 2015/08
A short pulse laser (the nanosecond and femtosecond) was applied to hydrogen absorbing alloys surface layer, and a surface modification experiment was put into effective to aim at improvement of hydrogen adsorption functionally. It was investigated about correlation between an initial hydrogen absorption reaction rate of hydrogen alloys and a laser irradiation in this research. The laser irradiation condition was done with pulse width 100 fsec and energy 0.2 - 3.4 mJ/pulse. It blazed down on hydrogen absorbing alloys (LaNi
Al
) and changed local order in the surface. As a result, the initial hydrogen absorption reaction rate was 1.5 - 3.0 times as fast as a irradiated sample, and the result and laser irradiated sample found out that a hydrogen absorption function improves. A laser irradiation can conclude to be effective in surface modification of the hydrogen storage materials.
Terada, Takaya; Nishimura, Akihiko; Oka, Kiyoshi; Moriyama, Taku*; Matsuda, Hiroyasu*
Hozengaku, 13(4), p.87 - 94, 2015/01
Nishimura, Akihiko; Takenaka, Yusuke*; Furuyama, Takehiro*; Shimomura, Takuya; Terada, Takaya; Daido, Hiroyuki
Journal of Laser Micro/Nanoengineering, 9(3), p.221 - 224, 2014/11
Times Cited Count：0 Percentile：0(Nanoscience & Nanotechnology)Heat resistant FBG sensors were developed by femtosecond laser processing to apply them to high temperature operated piping system of nuclear power plants. The FBG sensor was installed on the surface of a steel blade and a vibration test was conducted to detect the resonant vibration frequency of the vibrating blade. The FBG sensor had the heatproof performance at 600
C. A frequency stabilized sensing system using a tunable laser was tested for structural health monitoring in daily operation of nuclear power plants. The FBG sensor was installed on the surface of a steel blade for vibration induced strain measurements. Welding, brazing, soldering and noble metal powder adhesive were discussed for molding the FBG sensors.
Nishimura, Akihiko; Terada, Takaya; Takenaka, Yusuke*; Furuyama, Takehiro*; Shimomura, Takuya
Proceedings of 22nd International Conference on Nuclear Engineering (ICONE-22) (DVD-ROM), 6 Pages, 2014/07
Since 2007, JAEA has been developing laser based technologies of structural health monitoring. The FBG sensor made by femtosecond laser processing will be the best candidate. To make the best use of the heat resistant characteristic, the FBG sensor was embedded in metal mold by laser cladding. A groove was processed to the surface of a SUS metal plate. We used a QCW laser to weld a filler wire on the plate. A series of weld beads perfectly formed a sealing clad on the groove. Though the FBG sensor was buried tightly, no degradation on the reflection spectrum was detected after the processing. The FBG sensor could detect the vibration of the plate caused by impact shocks and audio vibration. The reflection peak of the FBG sensor under laser cladding condition was shifted to be 6 nm. We demonstrated that the corresponded temperature derive from the reflection peak shift reached 600 degrees in heat shock experiments. The installation procedure of a FBG sensor using a portable laser cladding machine was described.
Nishimura, Akihiko; Takenaka, Yusuke*; Furuyama, Takehiro*; Shimomura, Takuya; Terada, Takaya; Daido, Hiroyuki
Proceedings of 1st Smart Laser Processing Conference 2014 (SLPC 2014), 4 Pages, 2014/04
Heat resistant FBG sensors were developed by femtosecond laser processing. In order to apply them to piping system of nuclear power plants, vibration test under high temperature was demonstrated. The FBG sensor had the heatproof performance at 600C. A frequency stabilized sensing system using a tunable laser was tested for structural health monitoring in daily operation of nuclear power plants. The FBG sensor was installed on the surface of a steel blade for vibration induced strain measurements. Welding, brazing, soldering and noble metal powder adhesive were discussed for molding the FBG sensors.
Takeda, Seiji; Nishimura, Yuki; Munakata, Masahiro; Sawaguchi, Takuma; Kimura, Hideo
Genshiryoku Bakkuendo Kenkyu (CD-ROM), 19(2), p.23 - 38, 2012/12
In safety assessments of the geological disposal of TRU waste, it is important to understand the possibility and extents of influence of hyperalkaline groundwater derived from the degradation of cementitious materials that are used as forms for the containment of waste and as constructional materials in the disposal facilities of TRU waste. In this research, reactive transport analyses of hyperalkaline plume induced by cementitious materials were performed to clarify the extent of the hyperalkaline groundwater spreading and the type of alterations occurring with or without considering the precipitation of zeolite. The effect of the groundwater velocities on the spread of hyperalkaline groundwater was also examined. The analysis results indicate that whether zeolites precipitate or not significantly affect extent of hyperalkaline groundwater and the amount of precipitation of secondary minerals. In the case that groundwater velocity was 10 times higher, hyperalkaline groundwater spread broader than the original groundwater velocity case. It might be due to our kinetic dissolution model of host rock minerals, which limits chemical reactions neutralizing hyperalkaline groundwater.
Zhang, Z.*; Nishimura, Hiroaki*; Namimoto, Takura*; Fujioka, Shinsuke*; Arikawa, Yasunobu*; Nishikino, Masaharu; Kawachi, Tetsuya; Sagisaka, Akito; Hosoda, Hirokazu*; Orimo, Satoshi; et al.
Review of Scientific Instruments, 83(5), p.053502_1 - 053502_5, 2012/05
Times Cited Count：18 Percentile：62.3(Instruments & Instrumentation)X-ray line spectra ranging from 17 to 77 keV were quantitatively measured with a Laue spectrometer, composed of a cylindrically curved crystal and a detector. Either a visible CCD detector coupled with a CsI phosphor screen or an imaging plate can be chosen, depending on the signal intensities and exposure times. The absolute sensitivity of the spectrometer system was calibrated using pre-characterized laser-produced X-ray sources and radioisotopes. The integrated reflectivity for the crystal is in good agreement with predictions by an open code for X-ray diffraction. The energy transfer efficiency from incident laser beams to hot electrons, as the energy transfer agency for specific X-ray line emissions, is derived as a consequence of this work.
