Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sakakibara, Hiroshi; Aoki, Nobuhiro; Muto, Masahiro; Otabe, Jun; Takahashi, Kenji*; Fujita, Naoyuki*; Hiyama, Kazuhiko*; Suzuki, Hirokazu*; Kamogawa, Toshiyuki*; Yokosuka, Toru*; et al.
JAEA-Technology 2020-020, 73 Pages, 2021/03
The decommissioning is currently in progress at the prototype fast breeder reactor Monju. Fuel assemblies will be taken out of its core for the first step of the great task. Fuel assemblies stand on their own spike plugged into a socket on the core support plate and support with adjacent assemblies through their housing pads each other, resulting in steady core structure. For this reason, some substitutive assemblies are necessary for the purpose of discharging the fuel assemblies of the core. Monju side commissioned, therefore, Plutonium Fuel Development Center to manufacture the substitutive assemblies and the Center accepted it. This report gives descriptions of design, manufacture, and shipment in regard to the substitutive assemblies.
Irisawa, Keita; Taniguchi, Takumi; Namiki, Masahiro; Garca-Lodeiro, I.*; Osugi, Takeshi; Sakakibara, Tetsuro; Nakazawa, Osamu; Meguro, Yoshihiro; Kinoshita, Hajime*
Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 6 Pages, 2017/04
A solidification technique with minimized water content is being developed using phosphate cements for the safe storage of secondary radioactive wastes in the Fukushima Daiichi Nuclear Power Plant. Conventional cement systems become solidified via hydration reactions, and need a certain water content. Phosphate cement systems, however, become solidified via an acid-base reaction, and so they only require water mainly for reasons of workability. A reduced water content of phosphate cement systems is beneficial for the immobilization of the radioactive wastes from mitigating the potential to generate hydrogen gas by the radiolysis of water by radioactive wastes. The current study investigated the water content and mineralogy of calcium aluminate cement (CAC) and phosphate-modified CAC (CAP) cured in open systems at 60, 90 and 120 C and in a closed system at 20 C as a reference case. Water contents in both the CAC and the CAP were seen to decrease as curing progressed. For 90 C, the CAP contained less water than CAC. Free water in CAC converted to structural water by heat treatment, but this was not the case for CAP. An orthophosphate hydrate salt, a precursor phase of hydroxyapatite, was found in CAP when cured at 20 and 60 C, and a mixture of the orthophosphate hydrate salt and hydroxyapatite, Ca(PO)(OH), were formed in the CAP when cured at 90 C. Phosphate products in CAP cured at 120 C appears to consist of a different phosphate phase compared with the CAP cured at 20, 60 and 90 C.
Kashiwagi, Hirotsugu; Fukuda, Mitsuhiro; Okamura, Masahiro*; Jameson, R. A.*; Hattori, Toshiyuki*; Hayashizaki, Noriyosu*; Sakakibara, Kazuhiko*; Takano, Jumpei*; Yamamoto, Kazuo*; Iwata, Yoshiyuki*; et al.
Review of Scientific Instruments, 77(3), p.03B305_1 - 03B305_4, 2006/03
Times Cited Count:12 Percentile:52.29(Instruments & Instrumentation)Acceleration of a 17mA 100keV/u C ion beam has been successfully achieved with an RFQ linac by means of "Direct injection scheme". The Direct injection scheme is a new scheme for injecting an ion beam from a laser ion source to the RFQ linac without a low energy beam transport line to avoid a beam loss due to the space charge effect. The high current C beam is required for single turn injection to a synchrotron to reduce the size of synchrotron magnets. The high current C beam produced by an ion source with a Nd-YAG laser was injected to the RFQ linac by the Direct injection scheme. It has been proved experimentally that the fully-stripped carbon ion beam with a current more than 10mA can be accelerated by the RFQ linac.
Okamura, Masahiro*; Kashiwagi, Hirotsugu; Sakakibara, Kazuhiko*; Takano, Jumpei*; Hattori, Toshiyuki*; Hayashizaki, Noriyosu*; Jameson, R. A.*; Yamamoto, Kazuo*
Review of Scientific Instruments, 77(3), p.03B303_1 - 03B303_3, 2006/03
Times Cited Count:10 Percentile:47.11(Instruments & Instrumentation)We have been studying a new heavy-ion production technique called "direct plasma injection scheme", DPIS, since 2000. A new radio frequency quadrupole "RFQ" designed especially for the DPIS was commissioned in 2004 and very intense carbon beam was successfully obtained, reaching more than 60 mA accelerated current from the RFQ. Most of the contents of the accelerated beam was carbon 4+ as verified by beam analysis.
Sakakibara, Kazuhiko*; Okamura, Masahiro*; Kondrashev, S.*; Hattori, Toshiyuki*; Kashiwagi, Hirotsugu; Kanesue, Takeshi*
Review of Scientific Instruments, 77(3), p.03B304_1 - 03B304_3, 2006/03
Times Cited Count:2 Percentile:14.57(Instruments & Instrumentation)To accelerate highly charged intense ion beam, we have developed the direct plasma injectionscheme DPIS with laser ion source. In this scheme an ion beam from a laser ion source is injecteddirectly to a radio frequency quadrupole RFQ linac without a low energy beam transport LEBT line and then beam losses in the LEBT can be avoided. We achieved high current acceleration ofcarbon ions 60 mA by DPIS with the RFQ specially designed for high current heavy ions. As thenext step we will use heavier elements such as Al, Fe, and Ta as targets in laser ion source usinghigh power laser, for example, glass laser for DPIS and will examine properties of laser-producedplasma for highly charged ion production.
Kashiwagi, Hirotsugu; Okamura, Masahiro*; Jameson, R. A.*; Hattori, Toshiyuki*; Hayashizaki, Noriyosu*; Sakakibara, Kazuhiko*; Takano, Jumpei*; Yamamoto, Kazuo*; Iwata, Yoshiyuki*; Fujimoto, Tetsuya*
Proceedings of 2nd Annual Meeting of Particle Accelerator Society of Japan and 30th Linear Accelerator Meeting in Japan, p.182 - 184, 2005/07
The carbon beam from a Nd-YAG laser ion source was accelerated successfully by an RFQ linac using Direct injection scheme. The "Direct injection scheme" is the way to inject an ion beam to the RFQ linac without a low energy beam transport line to avoid space charge effect due to a high intensity beam from the laser ion source. About 30mA of a carbon beam was detected by a faraday cup just behind the RFQ linac.
Kumada, Takayuki; Sakakibara, Masahiro*; Nagasaka, Toshimitsu*; Fukuta, Hiroya*; Kumagai, Jun*; Miyazaki, Tetsuo*
Journal of Chemical Physics, 116(3), p.1109 - 1119, 2002/01
Times Cited Count:44 Percentile:77.99(Chemistry, Physical)We have studied diffusion and recombination of H atoms in solid hydrogen using ESR, ENDOR, and ESE spectrometer. The rate constant for recombination of H atoms in highly purified parahydrogen was found to be much smaller than that expected by diffusion coefficient. This result indicates that the H atoms do not recombine in the absence of energy dispersion path in highly purified parahydrogen.
Taniguchi, Takumi; Irisawa, Keita; Ito, Yuzuru; Namiki, Masahiro; Osugi, Takeshi; Abe, Tomohisa; Sato, Junya; Sakakibara, Tetsuro; Nakazawa, Osamu; Meguro, Yoshihiro; et al.
no journal, ,
no abstracts in English
Sakakibara, Hiroshi; Aoki, Nobuhiro; Muto, Masahiro; Otabe, Jun; Takahashi, Kenji*; Fujita, Naoyuki*; Hiyama, Kazuhiko*; Suzuki, Hirokazu*; Kamogawa, Toshiyuki*; Yokosuka, Toru*; et al.
no journal, ,
no abstracts in English