Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Mao, W.*; Gong, W.; 川崎 卓郎; Gao, S.*; 伊東 達矢; 山下 享介*; Harjo, S.; Zhao, L.*; Wang, Q.*
Scripta Materialia, 264, p.116726_1 - 116726_6, 2025/07
被引用回数：0An ultrafine-grained 304 austenitic stainless steel exhibited pronounced serrated Luders deformation at 20 K, with stress and temperature oscillations reaching 200 MPa and 20 K. 
neutron diffraction and digital image correlation revealed discontinuous Luders band propagation and burst martensite formation. During deformation, austenite phase stress remained lower than at upper yielding, indicating elastic behavior. Notably, martensite phase stress stayed lower than austenite until fracture, likely due to stress relaxation from burst martensitic transformation at 20 K. The low martensite stress delayed brittle fracture until austenite plastically yielded during uniform deformation.
友田 陽*; Harjo, S.; 徐 平光; 諸岡 聡; Gong, W.; Wang, Y.*
Metals, 15(6), p.610_1 - 610_19, 2025/05
Lattice parameters of product and matrix phases in steels have been measured using in situ X-ray and neutron diffraction during forward and reverse transformations. These parameters are influenced by temperature, transformation-induced internal stresses, alloying element partitioning, crystal defects, and magnetic strains. Disentangling these contributions is essential for understanding lattice behavior. This review explores internal strain (stress) associated with ferrite, pearlite, bainite, martensite, and reverse austenite transformations, emphasizing the distinction between diffusional and displacive mechanisms. It also examines how plastic deformation of austenite affects subsequent bainite or martensite formation. The roles of dislocations and vacancies are identified as critical areas for further research.
Wang, Y.*; Gong, W.; Harjo, S.; 他7名*
Acta Materialia, 288, p.120840_1 - 120840_14, 2025/04
被引用回数：1 パーセンタイル：0.00(Materials Science, Multidisciplinary)Low yield strength and the presence of Luders bands constitute principal impediments to the extensive applications of conventional medium Mn steels with a duplex microstructure of ferrite and austenite. Flash heating and the concept of chemical heterogeneity have been combined to engineer a duplex austenite-martensite microstructure in medium Mn steels, which has proven effective in augmenting the yield strength and mitigating the occurrence of Luders bands. However, the underlying mechanisms remain ambiguous. In the present work, the effect of austenite stability on yielding behavior was systematically investigated in an austenite-martensite duplex medium Mn steel. Austenite stability was identified as the critical factor governing yield strength, where reduced stability promotes early stage deformation induced martensite transformation, thereby decreasing yield strength. Diminished austenite stability may as well induce enhanced work hardening, thereby result in the inclination and eventual elimination of yield plateau, concomitant with the disappearance of Luders bands. These observations expand our current understanding of the yielding behavior in medium Mn steels and offer insights for the design of other advanced high strength steels.
Naeem, M.*; Rehman, A. U.*; Romero Resendiz, L.*; Salamci, E.*; Aydin, H.*; Ansari, P.*; Harjo, S.; Gong, W.; Wang, X.-L.*; 他3名*
Communications Materials (Internet), 6, p.65_1 - 65_13, 2025/04
The need for lightweight materials with mechanical integrity at ultralow temperatures drives the development of advanced alloys for cryogenic use. Additive manufacturing via laser powder bed fusion (LPBF) offers a scalable way to create alloys with tailored properties. Here, we show that LPBF-processed Al10SiMg exhibits a high ultimate tensile strength (395 MPa) and uniform elongation (25%) at 15 K. These enhancements stem from grain refinement, increased geometrically necessary dislocations, and stress partitioning between the Al matrix and the stiffer Si phase, aiding strain accommodation. neutron diffraction reveals that the Si phase, with its higher yield strength, bears most of the load, while the Al matrix undergoes continuous strain hardening, extending deformation capacity. These results highlight Al10SiMg's promise for cryogenic applications such as hydrogen storage, aerospace, and quantum computing hardware.
Naeem, M.*; Ma, Y.*; Tian, J.*; Kong, H.*; Romero-Resendiz, L.*; Fan, Z.*; Jiang, F.*; Gong, W.; Harjo, S.; Wu, Z.*; et al.
Materials Science & Engineering A, 924, p.147819_1 - 147819_10, 2025/02
被引用回数：0 パーセンタイル：0.00(Nanoscience & Nanotechnology)Face-centered cubic (fcc) medium-/high-entropy alloys (M/HEAs) typically enhance strength and ductility at cryogenic temperatures via stacking faults, twinning, or martensitic transformation. However, in-situ neutron diffraction on VCoNi MEA at 15 K reveals that strain hardening is driven solely by rapid dislocation accumulation, without these mechanisms. This results in increased yield strength, strain hardening, and fracture strain. The behavior, explained by the Orowan equation, challenges conventional views on cryogenic strengthening in fcc M/HEAs and highlights the role of dislocation-mediated plasticity at low temperatures.
Xu, J.*; Lang, P.*; Liang, S.*; Zhang, J.*; Fei, Y.*; Wang, Y.*; Gao, D.*; 服部 高典; 阿部 淳*; Dong, X.*; et al.
Journal of Physical Chemistry Letters (Internet), p.2445 - 2451, 2025/00
被引用回数：0 パーセンタイル：0.00(Chemistry, Physical)アルダー-エン反応は、アルケンとアリル水素との化学反応であり、C-C結合を構築する効率的な方法である。従来、この反応には触媒、高温、あるいは光触媒が必要であった。本研究では、触媒を用いずに室温下で加圧することで成功した1-ヘキセンのアルダー-エン反応を報告する。1-ヘキセンは4.3GPaで結晶化し、18GPaで重合してオレフィンを形成する。ガスクロマトグラフィー-質量分析法により、1-ヘキセンが高圧下でのアルダー-エン反応により二量体を生成することを発見した。その場中性子回折から、この反応過程はトポケミカル則に従わないことがわかった。理論計算により、1つのC-H 
結合と2つのアルケン
結合を含む6員環遷移状態が示され、そのエネルギーは20GPaまで圧縮すると明らかに減少した。本研究は、触媒を用いずに室温でアルダー-エン反応を実現する新規かつ有望な方法を提供し、この重要な反応の応用を拡大するものである。
neutron diffractionNaeem, M.*; Ma, Y.*; Knowles, A. J.*; Gong, W.; Harjo, S.; Wang, X.-L.*; Romero Resendiz, L.*; 他6名*
Materials Science & Engineering A, 916, p.147374_1 - 147374_8, 2024/11
被引用回数：2 パーセンタイル：63.37(Nanoscience & Nanotechnology)Heterostructured materials (HSMs) improve the strength-ductility trade-off of alloys, but their cryogenic performance under real-time deformation is unclear. We studied heterostructured CrCoNi medium-entropy alloy via neutron diffraction at 77 K and 293 K. A significant mechanical mismatch between fine and coarse grains led to an exceptional yield strength of 918 MPa at 293 K, increasing to 1244 MPa at 77 K with a uniform elongation of 34%. This strength-ductility synergy at 77 K is attributed to high dislocation pile-up density, increased planar faults, and martensitic transformation. Compared to homogeneous alloys, HSMs show promise for enhancing cryogenic mechanical performance in medium-/high-entropy alloys.
-
transitionsYang, Q.*; Yang, X.*; Wang, Y.*; Fei, Y.*; Li, F.*; Zheng, H.*; Li, K.*; Han, Y.*; 服部 高典; Zhu, P.*; et al.
Nature Communications (Internet), 15, p.7778_1 - 7778_9, 2024/09
被引用回数：9 パーセンタイル：88.46(Multidisciplinary Sciences)明るい一重項励起子と三重項励起子を同時に発現する発光材料は、オプトエレクトロニクス、サイネージ、情報暗号化において大きな可能性を秘めている。しかしながら、高性能の白色発光を実現するためには、蛍光と燐光の寄与が不均衡であることが大きな障害となっている。ここでは、水素結合の協同効果による圧力処理エンジニアリングによって、n--遷移の混合を実現し、イソフタル酸(IPA)中で三重項状態の発光を7%から40%に高めることで、この課題に対処した。加圧処理したIPAでは、蛍光と燐光のハイブリッドに基づく優れた白色発光が得られ、フォトルミネッセンス量子収率は当初の19%(青色発光)から75%に増加した。その場での高圧IRスペクトル、X線回折、中性子回折から、圧力の上昇に伴い水素結合が連続的に強化されることが明らかになった。さらに、この強化された水素結合は、圧力処理後も常圧条件下まで保持され、バランスの取れた一重項/三重項励起子集団のための効率的な系間交差を目的としたIPAに与え、効率的な白色発光をもたらした。この研究は、有機低分子の三重項状態を明るくするルートを提案するだけでなく、一重項励起子と三重項励起子の比率を調節して、高性能の白色発光を構築するものである。
Zhu, L.*; He, H.*; Naeem, M.*; Sun, X.*; Qi, J.*; Liu, P.*; Harjo, S.; 中島 健次; Li, B.*; Wang, X.-L.*
Physical Review Letters, 133(12), p.126701_1 - 126701_6, 2024/09
被引用回数：1 パーセンタイル：48.32(Physics, Multidisciplinary)It has long been suspected that magnetism could play a vital role in the phase stability of multi- component high-entropy alloys. However, the nature of the magnetic order, if any, has remained elusive. Here, by using elastic and inelastic neutron scattering, we demonstrate evidence of antiferromagnetic order below 
80 K and strong spin fluctuations persisting to room temperature in a single-phase face-centered cubic (fcc) CrMnFeCoNi high-entropy alloy. Despite the chemical complexity, the magnetic structure in CrMnFeCoNi can be described as 
-Mn-like, with the magnetic moments confined in alternating (001) planes and pointing toward the 
111
direction. Combined with first-principles calculation results, it is shown that the antiferromagnetic order and spin fluctuations help stabilized the fcc phase in CrMnFeCoNi high-entropy alloy.
Ying, H.*; Yang, X.*; He, H.*; Yan, A.*; An, K.*; Ke, Y.*; Wu, Z.*; Tang, S.*; Zhang, Z.*; Dong, H.*; et al.
Scripta Materialia, 250, p.116181_1 - 116181_7, 2024/09
被引用回数：1 パーセンタイル：41.92(Nanoscience & Nanotechnology)Nanoscale chemical fluctuations and their effect on the deformation behavior of CrFeCoNi-based high-entropy alloys (HEAs) were investigated using small-angle scattering and in situ neutron diffraction measurements. Small-angle scattering results demonstrated the presence of nano (
10 nm) chemical fluctuations in the as-prepared CrFeCoNiPd HEAs, which was attributed to the negative mixing of enthalpy and the significant atomic radius difference between Pd and the constituent elements in the CrFeCoNi-based alloys. Subsequent tensile tests demonstrated that the yield and tensile strengths of the as-prepared CrFeCoNiPd HEA surpass those of the as-prepared CrMnFeCoNi HEA. Neutron diffraction data analysis revealed an anomalous response of dislocation evolution with the strain.
Wang, S.*; Wang, J.*; Zhang, S.*; Wei, D.*; Chen, Y.*; Rong, X.*; Gong, W.; Harjo, S.; Liu, X.*; Jiao, Z.*; et al.
Journal of Materials Science & Technology, 185, p.245 - 258, 2024/06
被引用回数：15 パーセンタイル：97.90(Materials Science, Multidisciplinary)Nanoprecipitates and nanoscale retained austenite (RA) with suitable stability play crucial roles in determining the yield strength (YS) and ductility of ultrahigh strength steels (UHSSs). However, owing to the kinetics incompatibility between nanoprecipitation and austenite reversion, it is highly challenging to simultaneously introduce high-density nanoprecipitates and optimized RA in UHSSs. In this work, through the combination of austenite reversion treatment (ART) and subsequent flash austenitizing (FA), nanoscale chemical heterogeneity was successfully introduced into a low-cost UHSS prior to the aging process. This chemical heterogeneity involved the enrichment of Mn and Ni in the austenite phase. The resulting UHSS exhibited dual-nanoprecipitation of Ni(Al,Mn) and (Mo,Cr)
C and nanoscale austenite stabilized via Mn and Ni enrichment. The hard martensitic matrix strengthened by high-density dual-nanoprecipitates constrains the plastic deformation of soft RA with a relatively low fraction, and the presence of relatively stable nanoscale RA with adequate Mn and Ni enrichment leads to a marginal loss in YS but keeps a persistent transformation-induced plasticity (TRIP) effect. As a result, the newly-developed UHSS exhibits an ultrahigh YS of 1.7 GPa, an ultimate tensile strength (UTS) of 1.8 GPa, a large uniform elongation (UE) of 8.5 percent, and a total elongation (TE) of 13 percent. The strategy of presetting chemical heterogeneity to introduce proper metastable phases before aging can be extended to other UHSSs and precipitation-hardened alloys.
Ma, Y.*; Naeem, M.*; Zhu, L.*; He, H.*; Sun, X.*; Yang, Z.*; He, F.*; Harjo, S.; 川崎 卓郎; Wang, X.-L.*
Acta Materialia, 270, p.119822_1 - 119822_13, 2024/05
被引用回数：9 パーセンタイル：95.42(Materials Science, Multidisciplinary)We report an in situ neutron diffraction study of 316 L that reveals an extraordinary work-hardening rate (WHR) of 7 GPa at 15 K. Detailed analyses show that the major contribution to the excellent strength and ductility comes from the transformation-induced plasticity (TRIP) effect, introduced by the austenite-to-martensite (-to-
') phase transition. A dramatic increase in the WHR is observed along with the transformation; the WHR declined when the austenite phase is exhausted. During plastic deformation, the volume-fraction weighted phase stress and stress contribution from the '-martensite increase significantly. The neutron diffraction data further suggest that the -to-' phase transformation was mediated by the 
-martensite, as evidenced by the concurrent decline of the phase with the phase.
土屋 晴文; 日比野 欣也*; 川田 和正*; 大西 宗博*; 瀧田 正人*; 宗像 一起*; 加藤 千尋*; 霜田 進*; Shi, Q.*; Wang, S.*; et al.
Progress of Earth and Planetary Science (Internet), 11, p.26_1 - 26_14, 2024/05
被引用回数：0 パーセンタイル：0.00(Geosciences, Multidisciplinary)From 1998 to 2017, neutron monitors located at an altitude of 4300 m on the Tibetan plateau detected 127 long-duration bursts of high-energy radiation in association with thunderclouds. These bursts typically lasted for 10-40 min, and 89% of them occurred between 10:00 and 24:00 local time. They were also found to be more likely to occur at night, especially during 18:00-06:00 local time period. The observed diurnal and seasonal variations in burst frequency were consistent with the frequencies of lightning and precipitation on the Tibetan plateau. Based on 19 years of data, the present study suggests that an annual variation in burst frequency has a periodicity of 16 years and a lag of 3 years relative to solar activity.
水野 るり恵*; 新倉 潤*; 齋藤 岳志*; 松崎 禎市郎*; 櫻井 博儀*; Amato, A.*; 浅利 駿介*; Biswas, S.*; Chiu, I.-H.; Gianluca, J.*; et al.
Nuclear Instruments and Methods in Physics Research A, 1060, p.169029_1 - 169029_14, 2024/03
被引用回数：2 パーセンタイル：46.61(Instruments & Instrumentation)We have developed a photon detection system for muonic X-ray spectroscopy. The detector system consists of high-purity germanium detectors with BGO Compton suppressors. The signals from the detectors are readout with a digital acquisition system. The absolute energy accuracy, energy and timing resolutions, photo-peak efficiency, the performance of the Compton suppressor, and high count rate durability are studied with standard -ray sources and in-beam experiment using 
Al(
)
Si resonance reaction. The detection system was demonstrated at Paul Scherrer Institute. A calibration method for a photon detector at a muon facility using muonic X-rays of 
Au and 
Bi is proposed.
Linh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Duguet, T.*; G
mez-Ramos, M.*; Holt, J. D.*; Hu, B. S.*; et al.
Physical Review C, 109(3), p.034312_1 - 034312_15, 2024/03
被引用回数：2 パーセンタイル：58.81(Physics, Nuclear)理化学研究所RIビームファクトリーにて中性子過剰核
Arビームからの1中性子ノックアウト反応実験を行い、
Arのエネルギー準位および分光学的因子を導出した。特に、第一励起状態の
への分光学的因子が大きいことから、始状態のArの基底状態において中性子が
軌道を多く占めていることがわかった。これは、中性子数32がよい魔法数として知られる
Caとは異なった性質であり、カルシウムからアルゴンへと陽子が2個減ることで閉殻構造が大きく崩れることが明らかになった。
SnHuang, Z.*; Wang, W.*; Ye, H.*; Bao, S.*; Shangguan, Y.*; Liao, J.*; Cao, S.*; 梶本 亮一; 池内 和彦*; Deng, G.*; et al.
Physical Review B, 109(1), p.014434_1 - 014434_9, 2024/01
被引用回数：2 パーセンタイル：62.71(Materials Science, Multidisciplinary)TbMnSn is a correlated topological magnet with a Mn-based kagome lattice, in which a Chern gap opens at the Dirac point at low temperatures. The magnetic moment direction of the ferrimagnetic order changes from in the kagome plane to the out-of-plane upon cooling, which is essential for generating the Chern gap, but the underlying mechanism for the spin reorientation remains elusive. Here, we investigate the spin-reorientation transition in TbMnSn using neutron scattering. We provide direct evidence for the spin-reorientation transition and unveil the coexistence of two Tb modes at 200 K. To account for these results, we put forward a model based on SU(N) spin-wave theory, in which there is a temperature evolution of the ground state Tb 
orbitals, driven by the crystalline electric field, single-ion anisotropy, and exchange interactions between Tb and Mn ions. Our findings shed light on the complex magnetism of TbMnSn, despite its relatively simple ground state magnetic structure, and provide insights into the mechanisms for tuning magnetic topological materials.
Zhang, A.*; Deng, K.*; Sheng, J.*; Liu, P.*; Kumar, S.*; 島田 賢也*; Jiang, Z.*; Liu, Z.*; Shen, D.*; Li, J.*; et al.
Chinese Physics Letters, 40(12), p.126101_1 - 126101_8, 2023/12
被引用回数：11 パーセンタイル：83.08(Physics, Multidisciplinary)In a Dirac semimetal, the massless Dirac fermion has zero chirality, leading to surface states connected adiabatically to a topologically trivial surface state as well as vanishing anomalous Hall effect. Recently, itis predicted that in the nonrelativistic limit of certain collinear antiferromagnets, there exists a type of chiral "Dirac-like" fermion, whose dispersion manifests four-fold degenerate crossing points formed by spin-degenerate linear bands, with topologically protected Fermi arcs. Here, by combining with neutron diffraction and first-principles calculations, we suggest a multidomain collinear antiferromagnetic configuration, rendering the existence of the Fermi-arc surface states induced by chiral Dirac-like fermions.
Hu, Q.*; Wang, Q. M.*; Zhang, T.*; Zhao, C.*; Iltaf, K. H.*; Liu, S. Q.*; 深津 勇太
Energy Reports (Internet), 9, p.3661 - 3682, 2023/12
被引用回数：10 パーセンタイル：66.70(Energy & Fuels)This study evaluates petrophysical properties of representative geological rocks in the context of injectivity, storage space, and caprock integrity for effective utilization and long-term storage of carbon dioxide. A total of 10 geological rocks were selected as representative storage media for consideration as saline aquifers & depleted oil and gas reservoirs, basalts, and cap rocks, as well as utilization in organic-rich shale and coal seams. An integrated suite of laboratory tests, including liquid immersion porosimetry, gas expansion porosimetry, grain size distribution, mercury intrusion porosimetry, and gas diffusion, were performed on these various rock samples. The results exhibit a disparity of petrophysical properties among two broad groups of rocks: rocks selected for possible storage of CO have porosities of 10-25%, permeabilities of 10
-10
m
, 
m-sized pore-throat size distribution, and mostly good pore connectivity; in contrast, the potential caprocks have porosities of 0.5-5%, permeabilities of 10
-10
m, pore throat sizes of 
50 nm, and probably poorly connected pore networks. An understanding of the measured facets of pore structure and contribution of fractures is also critical in the context of different testing principles and data interpretation of petrophysical analyses, as well as observational scales in the laboratory and field, and therefore reliable confidence of CO storage and utilization performance. Our work further illustrates the controlling influence of grain size distribution and geological processes on pore size distribution and pore connectivity for a wide range of rock types and lithologies, and particularly presents the extent and behavior of CO gas diffusion with a custom-designed apparatus for a holistic understanding of various petrophysical attributes of widely different geological rocks.
Ratliff, H.; McGirl, N. A.*; Beach, M. R.*; Castellanos, L. A.*; Clowdsley, M. S.*; Heilbronn, L. H.*; LaTessa, C.*; Norbury, J. W.*; Rusek, A.*; Sivertz, M.*; et al.
Nuclear Instruments and Methods in Physics Research B, 544, p.165121_1 - 165121_15, 2023/11
被引用回数：0 パーセンタイル：0.00(Instruments & Instrumentation)Experiments emulating the deep-space radiation environment within an enclosed spacecraft were conducted at the NASA Space Radiation Laboratory; this was achieved by bombarding various combinations of two consecutive thick targets with Galactic Cosmic Ray-like particle beams. While all secondary particles generated in the first of these two targets could be characterized using time-of-flight techniques, characterization of the neutrons produced in the second target, emulating the "back wall" of a spacecraft, required the development and implementation of deconvolution techniques. This work covers this methodology, its validation, and the systematic results present within this benchmark dataset of neutron yields from the secondary target.
Be ground-state molecular structure using Be(
)
He triple differential reaction cross-section measurementsLi, P. J.*; Beaumel, D.*; Lee, J.*; Assi
, M.*; Chen, S.*; Franchoo, S.*; Gibelin, J.*; Hammache, F.*; Harada, T.*; 延与 佳子*; et al.
Physical Review Letters, 131(21), p.212501_1 - 212501_7, 2023/11
被引用回数：21 パーセンタイル：93.59(Physics, Multidisciplinary)Beのクラスター構造を()反応を用いて調査した。三重微分断面積が実験的に測定され、Tohsaki-Horiuchi-Schuck-R
pke波動関数の方法や反対称化分子動力学を用いた歪曲波インパルス近似計算と比較した。実験データと理論計算の顕著な一致が確認され、Beの比較的コンパクトな分子状態を確認した。
