Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Niwa, Masakazu; Shimada, Koji; Sueoka, Shigeru; Ishihara, Takanori; Hakoiwa, Hiroaki; Asamori, Koichi; Murakami, Osamu; Fukuda, Shoma; Ogita, Yasuhiro; Kagami, Saya; et al.
JAEA-Research 2024-013, 65 Pages, 2024/11
This annual report documents the progress of research and development (R&D) in the 2nd fiscal year of the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028) to provide the scientific base for assessing geosphere stability for long-term isolation of high-level radioactive waste. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques. The current status of R&D activities with previous scientific and technological progress is summarized.
Niwa, Masakazu; Shimada, Akiomi; Asamori, Koichi; Sueoka, Shigeru; Komatsu, Tetsuya; Nakajima, Toru; Ogata, Manabu; Uchida, Mao; Nishiyama, Nariaki; Tanaka, Kiriha; et al.
JAEA-Review 2024-035, 29 Pages, 2024/09
This report is a plan of research and development (R&D) on geosphere stability for long-term isolation of high-level radioactive waste (HLW) in Japan Atomic Energy Agency (JAEA), in fiscal year 2024. The objectives and contents of this research are described in detail based on the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028). In addition, the background of this research is described from the necessity and the significance for site investigation and safety assessment, and the past progress. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques.
Nakayama, Shinsuke; Furutachi, Naoya; Iwamoto, Osamu; Watanabe, Yukinobu*
NEA/NSC/R(2020)4 (Internet), p.345 - 349, 2022/10
Long-lived fission products (LLFPs) generated in nuclear reactors are strongly desired to be converted to stable or short-lived nuclides. Recently, it has been considered to transmute LLFPs by spallation reactions with high energy particles, and some experimental studies revealed that spallation reaction cross-sections induced by deuteron are larger than proton-induced ones. These results suggest the possibility that nuclear transmutation of LLFPs using deuteron beams is more efficient than one using proton beams. On the other hand, we have been developing a code system dedicated for deuteron-induced reactions, called DEURACS. DEURACS has been originally developed to contribute to the design of deuteron accelerator neutron sources. In the present study, we apply DEURACS to calculation of deuteron-induced spallation reactions on LLFPs. Through comparison with measured data, the applicability of DEURACS will be discussed.
Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.
Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09
Times Cited Count:7 Percentile:72.25(Nuclear Science & Technology)In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.
Kobayashi, Daisuke; Yamamoto, Masahiko; Nishida, Naoki; Miyoshi, Ryuta; Nemoto, Ryo*; Hayashi, Hiroyuki*; Kato, Keisuke; Nishino, Saki; Kuno, Takehiko; Kitao, Takahiko; et al.
Nihon Hozen Gakkai Dai-18-Kai Gakujutsu Koenkai Yoshishu, p.237 - 240, 2022/07
All gloves attached to glove-box in Tokai Reprocessing Plant have a fixed expiration date and have to be replaced every 4-year. However, degrees of glove deterioration are different depending on its usage environment (frequency, chemicals, radiation, etc.), because of rubber products. Therefore, physical properties such as tensile strength, elongation, hardness of gloves are measured, and the life-time of gloves are estimated. As a result, gloves without any defects in its appearance have enough physical property for acceptance criteria of new glove. The extrapolated physical property of glove is sufficiently larger than the reported values of damaged glove. No deterioration in physical properties of gloves, that are periodically replaced without any defects in its appearance, is observed and the usable life-time of the glove is estimated to be 8 years.
Nakayama, Shinsuke; Iwamoto, Osamu; Watanabe, Yukinobu*; Ogata, Kazuyuki*
Few-Body Systems, 63(1), p.4_1 - 4_6, 2022/03
Times Cited Count:1 Percentile:19.76(Physics, Multidisciplinary)Intensive neutron sources using deuteron accelerators have been proposed for not only science and engineering fields but also medical applications. For the engineering design of such facilities, accurate and comprehensive nuclear data of deuteron-induced reactions are indispensable. However, it is difficult to meet the requirement by employing experimental data alone. Thus, theoretical model calculations play a key role in completing the necessary nuclear data by interpolation and extrapolation of experimental data. Under the above situations, we have been developing a code system dedicated for deuteron-induced reactions, called DEURACS. In the present work, calculations using DEURACS are compared with available experimental data and validation of the present modelling in DEURACS is discussed. Moreover, the importance of consideration of the breakup processes for accurate prediction of deuteron-induced reactions is also presented.
Inagawa, Jun; Kitatsuji, Yoshihiro; Otobe, Haruyoshi; Nakada, Masami; Takano, Masahide; Akie, Hiroshi; Shimizu, Osamu; Komuro, Michiyasu; Oura, Hirofumi*; Nagai, Isao*; et al.
JAEA-Technology 2021-001, 144 Pages, 2021/08
Plutonium Research Building No.1 (Pu1) was qualified as a facility to decommission, and preparatory operations for decommission were worked by the research groups users and the facility managers of Pu1. The operation of transportation of whole nuclear materials in Pu1 to Back-end Cycle Key Element Research Facility (BECKY) completed at Dec. 2020. In the operation included evaluation of criticality safety for changing permission of the license for use nuclear fuel materials in BECKY, cask of the transportation, the registration request of the cask at the institute, the test transportation, formulation of plan for whole nuclear materials transportation, and the main transportation. This report circumstantially shows all of those process to help prospective decommission.
Nakayama, Shinsuke; Iwamoto, Osamu; Watanabe, Yukinobu*; Ogata, Kazuyuki*
Journal of Nuclear Science and Technology, 58(7), p.805 - 821, 2021/07
Times Cited Count:28 Percentile:97.14(Nuclear Science & Technology)Intensive fast neutron sources using deuteron accelerators have been proposed for various applications. To contribute to the design study of such neutron sources, a deuteron nuclear data library for Li, Be, and C up to 200 MeV, JENDL/DEU-2020 is developed. The evaluation of JENDL/DEU-2020 are performed by employing the code system DEURACS with particular attention to neutron production data. Toward the evaluation of JENDL/DEU-2020, some modifications are made to DEURACS. The validation of the library is performed though simulation with the Monte Carlo transport calculation codes. From the simulation, it is shown that the calculation results based on JENDL/DEU-2020 reproduce the measured neutron production data well in the incident energies up to 200 MeV. The new library is expected to make a large contribution to diverse design studies of deuteron accelerator neutron sources.
Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.
Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03
Times Cited Count:49 Percentile:96.63(Astronomy & Astrophysics)Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.
Watanabe, Yukinobu*; Shigyo, Nobuhiro*; Kin, Tadahiro*; Iwamoto, Osamu
JAEA-Conf 2020-001, 236 Pages, 2020/12
The 2019 Symposium on Nuclear Data was held at Chikushi Campus Cooperation Building (C-Cube), Kyushu University, on November 28 to 30, 2019. The symposium was organized by the Nuclear Data Division of the Atomic Energy Society of Japan (AESJ) in cooperation with Sigma Investigative Advisory Committee of AESJ, Nuclear Science and Engineering Center of Japan Atomic Energy Agency, Kyushu Branch of AESJ, and Center for Accelerator and Beam Applied Science of Kyushu University. In the symposium, there were one tutorial, "From the resonance theory to statistical model", and five sessions, "Study on Nuclear Data and related topics", "Reactor physics", "International Cooperation", "Nuclear Physics", and "High Energy Nuclear Data and their Application". In addition, recent research progress on experiments, nuclear theory, evaluation, benchmark and applications was presented in the poster session. Among 85 participants, all presentations and following discussions were very active and fruitful. This report consists of total 42 papers including 13 oral and 29 poster presentations.
Nakayama, Shinsuke; Iwamoto, Osamu; Watanabe, Yukinobu*
EPJ Web of Conferences, 239, p.03014_1 - 03014_4, 2020/09
Times Cited Count:2 Percentile:83.55(Nuclear Science & Technology)Intensive neutron sources using deuteron accelerators have been proposed for various applications such as irradiation test for fusion reactor materials and production of radioisotopes for medical use. In addition, transmutation system using deuteron-induced spallation reactions has been recently proposed for LLFPs. Accurate and comprehensive deuteron nuclear data are indispensable in the design study of such facilities. Under the above situations, we have been developing a code system dedicated for deuteron-induced reactions, which is called DEURACS. In the present work, calculations using DEURACS are compared with available experimental data up to 200 MeV such as DDXs for emission of neutron or light charged particles. We also analyze isotopic production cross sections of residual nuclei. Validation of the present modelling in DEURACS is discussed through comparison with the experimental data.
Kubo, Shigenobu; Chikazawa, Yoshitaka; Ohshima, Hiroyuki; Uchita, Masato*; Miyagawa, Takayuki*; Eto, Masao*; Suzuno, Tetsuji*; Matoba, Ichiyo*; Endo, Junji*; Watanabe, Osamu*; et al.
Mechanical Engineering Journal (Internet), 7(3), p.19-00489_1 - 19-00489_16, 2020/06
The authors are developing the design concept of pool-type sodium-cooled fast reactor (SFR) that addresses Japan's specific siting conditions such as earthquakes and meets safety design criteria (SDC) and safety design guidelines (SDGs) for Generation IV SFRs. The development of this concept will broaden not only options for reactor types in Japan but also the range and depth of international cooperation. A design concept of 1,500 MWt (650 MWe) class pool-type SFR was thought up by applying design technology obtained from the design of advanced loop-type SFR, named JSFR, equipped with safety measures that reflect results from the feasibility study on commercialized fast reactor cycle systems and fast reactor cycle technology development, improved maintainability and repairability, and lessons learned from the Fukushima Daiichi Nuclear Power Plants accident.
Kunieda, Satoshi; Furutachi, Naoya; Minato, Futoshi; Iwamoto, Nobuyuki; Iwamoto, Osamu; Nakayama, Shinsuke; Ebata, Shuichiro*; Yoshida, Toru*; Nishihara, Kenji; Watanabe, Yukinobu*; et al.
Journal of Nuclear Science and Technology, 56(12), p.1073 - 1091, 2019/12
Times Cited Count:10 Percentile:62.42(Nuclear Science & Technology)A new nuclear data library, JENDL/ImPACT-2018, is developed for an innovative study on the transmutation of long-lived fission products. Nuclear reaction cross- sections are newly evaluated for incident neutrons and protons up to 200 MeV for 163 nuclides including long-lived nuclei such as Se, Zr, Pd and Cs. Our challenge is an evaluation of cross-sections for a number of unstable nuclei over a wide energy range where the experimental data are very scarce. We estimated cross- sections based on a nuclear model code CCONE that incorporates an advanced knowledge on the nuclear structure theory and a model-parameterization based on a new experimental cross-sections measured by the inverse kinematics. Through comparisons with available experimental data on the stable isotopes, it is found that the present data give predictions of cross-sections better than those in the existing libraries.
Nakayama, Shinsuke; Iwamoto, Osamu; Watanabe, Yukinobu*
Physical Review C, 100(4), p.044603_1 - 044603_8, 2019/10
Times Cited Count:7 Percentile:55.74(Physics, Nuclear)The weakly-bound nature of the deuteron brings the complexity of deuteron-induced reactions compared to nucleon-induced ones, and is expected to affect various physical quantities observed in deuteron-induced reactions. Aiming to deep understanding and accurate prediction for the emission of light composite particle (LCP) in deuteron-induced reactions, we revise the computational system dedicated to deuteron-induced reactions, called DEURACS. The model by Iwamoto and Harada describing pre-equilibrium cluster emission which was successfully applied to LCP emission innucleon-induced reactions is integrated into the framework of DEURACS, in which the breakup processes of incident deuteron are explicitly taken into account. The phenomenological model by Kalbach is also adopted to estimate the contribution from the direct pickup process. Using the revised DEURACS, we analyze the , , and reactions in the target mass range . Regardless of the targets, the calculation results successfully reproduced the experimental data for each reaction, simultaneously. These results demonstrates that the LCP emission from the pre-equilibrium and compound nucleus processes in deuteron-induced reactions,which occupies a large part of the total LCP emission,can be described by the same theoretical models as used in nucleon-induced reactions when the breakup processes of incident deuteron are properly considered.
Watanabe, Tamaki*; Toyama, Takeshi*; Hanamura, Kotoku*; Imao, Hiroshi*; Kamigaito, Osamu*; Kamoshida, Atsushi*; Kawachi, Toshihiko*; Koyama, Ryo*; Sakamoto, Naruhiko*; Fukunishi, Nobuhisa*; et al.
Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1105 - 1108, 2019/07
Upgrades for the RIKEN heavy-ion linac (RILAC) involving a new superconducting linac (SRILAC) are currently underway at the RIKEN radioactive isotope beam factory (RIBF). It is crucially important to develop nondestructive beam measurement diagnostics. We have developed a beam energy position monitor (BEPM) system which can measure not only the beam position but also the beam energy simultaneously by measuring the time of flight of the beam. We fabricated 11 BEPMs and completed the position calibration to obtain the sensitivity and offset for each BEPMs. The position accuracy has been achieved to be less than 0.1 mm by using the mapping measurement.
Watanabe, Takashi*; Takeuchi, Tomoaki; Ozawa, Osamu*; Komanome, Hirohisa*; Akahori, Tomoyuki*; Tsuchiya, Kunihiko
Proceedings of 2019 International Image Sensor Workshop (IISW 2019) (Internet), 4 Pages, 2019/06
Radiation hard image sensors have been developed past decades among the world. Almost papers discussed properties before and after radiation but images during radiation were not described yet. We have developed a new type of rad-hard pixel and integrated to 1.3M-pixel, 18-bit digital CMOS image sensor. Pixel area consists of several types of variation and the sensor has been analyzed during gamma ray radiation higher than 1 kGy/h up to 200 kGy. As the result, one type of pixel showed almost zero dark current increase at whole period.
Kubo, Shigenobu; Chikazawa, Yoshitaka; Ohshima, Hiroyuki; Uchita, Masato*; Miyagawa, Takayuki*; Eto, Masao*; Suzuno, Tetsuji*; Matoba, Ichiyo*; Endo, Junji*; Watanabe, Osamu*; et al.
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 8 Pages, 2019/05
The authors are developing the design concept of pool-type sodium-cooled fast reactor (SFR) that addresses Japan's specific siting conditions such as earthquakes and meets safety design criteria (SDC) and safety design guidelines (SDGs) for Generation IV SFRs. The development of this concept will broaden not only options for reactor types in Japan but also the range and depth of international cooperation. A design concept of 1,500 MWt (650 MWe) class pool-type SFR was thought up by applying design technology obtained from the design of advanced loop-type SFR, named JSFR, equipped with safety measures that reflect results from the feasibility study on commercialized fast reactor cycle systems and fast reactor cycle technology development, improved maintainability and repairability, and lessons learned from the Fukushima Daiichi Nuclear Power Plants accident.
Iwamoto, Osamu; Fujita, Reiko*; Niita, Koji*; Watanabe, Yukinobu*
Kaku Deta Nyusu (Internet), (122), p.33 - 43, 2019/02
A program related to the transmutation of long-lived fission products (LLFPs) entitled "Reduction and Resource Recycling of High-level Radioactive Wastes through Nuclear Transmutation" has been conducted under the Impulsing Paradigm Change through Disruptive Technologies Program (ImPACT) organized by the Cabinet Office since 2014 and it will be finished in FY 2018. Various activities from acquisition of basic data to examination of transmutation scenario are being carried out as the five separated projects. R&Ds related to nuclear data are also conducted and many outcomes are being produced. This article describes results of the two projects related nuclear data with a short introduction of the whole project.
Takeuchi, Tomoaki; Otsuka, Noriaki; Watanabe, Takashi*; Tanaka, Shigeo*; Ozawa, Osamu*; Komanome, Hirohisa*; Ueno, Shunji*; Tsuchiya, Kunihiko
Proceedings of 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC 2017) (Internet), 3 Pages, 2018/11
no abstracts in English
Nakayama, Shinsuke; Furutachi, Naoya; Iwamoto, Osamu; Watanabe, Yukinobu*
Physical Review C, 98(4), p.044606_1 - 044606_8, 2018/10
Times Cited Count:14 Percentile:73.71(Physics, Nuclear)Use of deuteron-induced spallation reactions at intermediate energies has recently been proposed for transmutation of several long-lived fission products (LLFPs). In the design study of a transmutation system using a deuteron primary beam, accurate cross section data of deuteron-induced reactions on the LLFPs are indispensable. In the present study, production cross sections of residual nuclei in the deuteron-induced reactions on Zr and Pd at MeV/nucleon are analyzed using DEURACS, in which the breakup processes are explicitly taken into account. The calculated values reproduced the experimental data quantitatively well. From a component-by-component analysis, it was found that the components of nucleon absorption make the significant contributions to residual nuclei production. This result strongly indicates that consideration of the breakup processes is essentially important to predict production of residual nuclei in deuteron-induced reactions.