Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yoshitomi, Hiroshi
Isotope News, (786), p.26 - 29, 2023/04
no abstracts in English
Yoshinaka, Kazuyuki; Shimizu, Kazuyuki; Sugiyama, Takayuki
JAEA-Review 2021-008, 112 Pages, 2021/07
We had drastically been improving quality assurance system for Tokai Reprocessing Plant (TRP), through applying new regulatory requirements, giving up ISO certification from FY2012 to 2019. In revising QA system, it is obviously necessary to satisfy the regulatory requirements, but it is important to continuously improve the QA system considering effectiveness to safety performance based on earlier experiences. In this report, the background of QA system revision, interpretation and thinking way of conformation and application to new regulation and "Application Guide to Quality Assurance Code for Safety in Nuclear Power Plants (JEAC 4111)" to TRP, issues considered. And matters that require attention for future QA activities are described. Key points are "in work processes planning, relationship with other sections and responsibility boundaries should be clearly defined with such as flow chart", "to manage decision-making processes is important, including input information, judgment criteria and so on", "concerning process monitoring and measurement, not only focusing on scheduling but also viewpoints toward conditions of facilities/systems, conformance to regulatory requirements and process improvement are necessary", and "in documentation, matching for existing system, clear relation to other fundamental documents are necessary".
Waste Technical Standards Working Group
JAEA-Review 2017-017, 112 Pages, 2017/11
In Japan Atomic Energy Agency, JAEA, a Waste Technical Standards Working Group has established since FY2015. The Working Group is composed of the members from waste management sections in each site in JAEA and from Radioactive Waste Management and Disposal Project Department. In this Working Group, we discussed quality management on conditioning waste packages, methodologies to evaluate the radioactivity concentration and measures for dismantling waste. This annual report summarizes the results of discussion in FY2016.
Usuda, Shigekazu
Isotope News, (617), p.20 - 24, 2005/09
no abstracts in English
Kikuchi, Masahiro*; Muraoka, Susumu*; Osabe, Takeshi*; Terada, Hiromi; Shimizu, Kenichi; Otani, Tetsuo*; Fujimaki, Kazunori*; Ishikawa, Tadatsugu*; Shinohara, Yoshinori*
Dai-23-Kai Kaku Busshitsu Kanri Gakkai Nihon Shibu Nenji Taikai Rombunshu, p.91 - 98, 2002/12
Nuclear material measurement is an important measure to determine the amount of nuclear material of each stage such as receipt, shipment, inventory and hold-up. The material accountancy based on the material balance among the measurements is a measure to control of nuclear material. The material accountancy, from its technical aspect, can be used as promising measures for purposes from operator's level to state's level such as the nuclear safety, property control and environmental preservation other than safeguards measures only to conclude no diversion of nuclear material. This paper discusses various purposes of nuclear material measurements and clarifies the certain function to be expected at each purpose. Based on the discussion, critical points for the quality assurance of each stage are studied.
Yonezawa, Chushiro; Matsue, Hideaki; Miyamoto, Yutaka; Suzuki, Daisuke; Yasuda, Kenichiro; Inagawa, Jun; Saito, Yoko
Jitsuyo Gamma-sen Sokutei Handobukku, 366 Pages, 2002/06
no abstracts in English
Kanamori, Masashi
JNC TN8440 2001-023, 110 Pages, 2001/12
The business of the Safety administration Division became a wide range such as the management of a labor safety health, the crisis management, the security and the management of an entrance, and the business of the following concerning the Tokai Works, the protection of nuclear materials, the business of the sanction, the nuclear material safeguards, the transport of nuclear materials and the business of a quality assurance. For the purpose of summarizing these businesses and utilizing the data concerning the businesses, the report about the businesses achievement has been periodically drawn up as quarter news since 2001, when the Safety Administration Division was established. This report describes about the business achievement of the second quarter news from July to September in 2001.
Kanamori, Masashi
JNC TN8440 2001-015, 100 Pages, 2001/09
As a consequence of this reorganization, the business of the Safety Administration Division became a wide range such as the management of a labor safety health, the crisis management, the security and the management of an entrance, the business of the sanction concerning the Tokai Works, the protection of nuclear materials, the nuclear material safeguards, the transport of nuclear materials and the business of a quality assurance. In the respect of the purpose of summarizing these businesses and utilizing the data concerning the businesses, the report about a business achievement was determined to make.
Kajiyama, Tadashi; Numata, Kazuaki; Otani, Seiji; *; *; Goto, Tatsuro*; Takahashi, Hideki*
JNC TN8440 2000-008, 34 Pages, 2000/02
The procedure and result of lower endplug welding, Test and Inspection and Shipment of the 1 reload core fuel assembly (80 Fuel Assemblies) for the fast breeder reactor MONJU should be report, which had examined and inspected in Tamatsukuri Branch, Material Insurance office, Quality Assurance Section, Technical Administration Division, Plutonium Fuel Center (before: Inspection Section, Plutonium Fuel Division), from June 1994 to January 1996. The number of cladding tubes welded to the endplug were total to 13,804, 7,418 for Core - Inside of 43 fuel Assemblies and 6,386 for Core-Outside of 37 fuel Assemblies. 13,794 of them, 7,414 Core-Inside and 6,379 Core-Outside were approved by the test and sent to Plutonium Fuel Center. 10 of them weren't approved mainly because of default welding. Disapproval rating is 0.07%.
Ueta, Shinzo*; *; *; *
JNC TJ8400 2000-002, 364 Pages, 2000/02
Japan Nuclear Cycle Development Institute (JNC) have been setting migration parameters and developing its database for the 2nd Progress Report of HLW Geological Disposal (H12 Report). In this study, experimentswere carried out to certify the reliability of parameters and scenario, and examination was carried out to survey procedures of quality management. The main contents are as follows. (1)Data acquisition for certification of migration parameters. The effect of NH complex of Pd on distribution coefficients (Kd) of Pd on both bentonite and rocks, and the effect of sulfate and carbonate complexes of Am on Kds of Am on bentonite are investigated. Kds of Pd depended on NH concentration in aqueous. The dependence varied with pH. Effects of sulfate and carbonate complexes on Kds of Am were not remarkable. Apparent diffusivities of Cs in bentonite saturated by saline water were measured. It was confirmed that the apparent diffusivities of Cs in saline water were similar to those in pure water. (2)Evaluation of colloidal effect on nuclide migration. An evaluation of validity of analytical model (Hwang's model) for nuclide migration under existence of colloids and investigation of characterization of colloids in groundwater were carried out. As the results, it was indicated that the Hwang's model was appropriate, and it was found that samplingtechnique influenced concentration and size distribution of colloids. (3)Influence of organic substances on solubility. Solubility of Th was measured under the condition with humic acid and carbonate. It increased roughly in proportion to the concentration of humic acid. And it was remarkably high under the condition with carbonate. It was confirmed that Th solubility data set in H12 report was conservative, even though humic acid existed in groundwater. (4)Use of Mechanistic Models for Safety Assessment. The integrated sorption/diffusion model has been used to calculate K, D and D values ...
Fusaeda, Shigeki*; Yanagisawa, Ichiro*; Kataoka, Shinichi*; Shimada, Takashi*; *; *; *
PNC TJ1216 98-007, 46 Pages, 1998/02
None
Fusaeda, Shigeki*; Yanagisawa, Ichiro*; Kataoka, Shinichi*; Shimada, Takashi*; *; *; *
PNC TJ1216 98-006, 673 Pages, 1998/02
None
; Murayama, Yoji; Takayanagi, Masaji; Ara, Katsuyuki
IAEA-TECDOC-973, 0, p.113 - 120, 1997/10
no abstracts in English
*; Fusaeda, Shigeki*; Kataoka, Shinichi*; Nemoto, Kazuhiko*; Yanagisawa, Ichiro*; Fukui, Hiroshi*; Doi, Motoo*
PNC TJ1216 97-007, 77 Pages, 1997/03
None
*; *; Kataoka, Shinichi*; Nemoto, Kazuhiko*; Yanagisawa, Ichiro*; Fukui, Hiroshi*; Doi, Motoo*
PNC TJ1216 97-006, 202 Pages, 1997/03
None
Toyohara, Masumitsu*; Hirayama, Fumio*; Tamura, Toshiyuki*; Fukazawa, Takuji*; Igarashi, Noboru*
PNC TJ8164 96-010, 213 Pages, 1996/03
no abstracts in English