検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 435 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

海洋調査を目的とした無人観測船の開発

眞田 幸尚

福島イノベーション・コースト構想; 浜通りの未来を拓く実用化開発プロジェクト2018年度版, P. 35, 2019/05

福島県イノベーションコースト構想における実用化開発等促進事業に公募し、浜通り所在の事業者らと研究開発体制を組み、無人船の開発を行った。同船は、放射線の測定のみならず海底土サンプルの採取や海水の基礎的な情報(水温等)を取得できるマルチセンサーを搭載しており、開発で得られた要素技術と共に、多様な分野への応用が期待される。

論文

Characteristics of commercially available CdZnTe detector as gamma-ray spectrometer under severe nuclear accident

谷村 嘉彦; 西野 翔; 吉富 寛; 古渡 意彦; 大石 哲也

Progress in Nuclear Science and Technology (Internet), 6, p.134 - 138, 2019/01

福島第一原子力発電所事故のような原子力災害時においては、様々な放射性物質が環境中に放出され、線量を増加させることが考えられる。$$gamma$$線スペクトルを測定し、核種を同定することは外部被ばくと内部被ばくの両方に対する放射線防護上重要である。そこで、市販のCdZnTeスペクトロメータを選び、$$gamma$$線入射角度依存性と使用可能な線量率範囲をFRSの校正場で試験した。その結果、全体の85%をカバーできる$$pm$$135$$^{circ}$$において感度低下は15%以下であり、200$$mu$$Gy/h以下の空気カーマ率の場においてスペクトルが測定できることがわかった。

論文

Gamma-ray imaging system for Fukushima Daiichi Nuclear Power Plant using silicon strip detector

冠城 雅晃; 佐藤 優樹; 吉原 有里*; 島添 健次*; 高橋 浩之*; 鳥居 建男

Reactor Dosimetry; 16th International Symposium on Reactor Dosimetry (ISRD-16) (ASTM STP 1608), p.405 - 414, 2018/11

On March 11, 2011, a massive earthquake occurred in the Tohoku region of Japan, and a large tsunami hit the Fukushima Daiichi Nuclear Power Plant (1F), resulting in a nuclear accident. Despite the years that have passed since the accident, decommissioning remains a concern. Radiation measurement techniques are very important for accelerating the decommissioning and ensuring low radiation exposure to workers. Our gamma-ray imaging system is the detection device for determining the three dimensional radioactive distributions of nuclear fuel debris, measuring high-energy gamma rays (greater than 1 MeV). Silicon semiconductor detectors are among the candidate detectors for radiation measurements in our system because of their radiation-hardness and high counting rate capability. We have been developing a stacked amorphous-silicon (Si)/crystal-Si heterojunction Si strip detector, which has 1-mm-pitch striped electrodes (0.5 mm wide) and 1.2-mm-pitch stacked technology. The detector consists of an Si strip mounted on a thin printed circuit board, front-end readout electronics with a complementary metal oxide semiconductor application specific integrated circuit, and a field programmable gate array. The threshold level of energy deposition of each pulse signal in each channel can be set from the application-specific integrated circuit, and gamma-ray images with energy discrimination can be obtained. The energy threshold level for discrimination of $$^{60}$$Co gamma rays from $$^{137}$$Cs gamma rays was investigated experimentally and by means of simulation, and it was found to be about 500 keV. Therefore, our Si strip detector has the required position sensitivity and energy discrimination ability for identifying high-energy gamma-ray source distributions.

論文

Beamline test of a transition-edge-sensor spectrometer in preparation for kaonic-atom measurements

橋本 直*; 谷田 聖; 他49名*

IEEE Transactions on Applied Superconductivity, 27(4), p.2100905_1 - 2100905_5, 2017/06

We are developing a new technique to apply transition-edge sensors (TESs) to X-ray spectroscopy of exotic atoms, especially of kaonic atoms. To demonstrate the feasibility of this pioneering project, performance of a TES-based X-ray detector was evaluated in pion- and kaon-beam environments at particle accelerators. We successfully observed X-rays from pionic-carbon atoms with a resolution as good as 7 eV FWHM at 6 keV. Also at a kaon beamline, we confirmed that the TES spectrometer will be able to achieve our resolution goal, 6 eV, in our first scientific campaign to measure X-rays from kaonic-helium atoms.

論文

希ガス計数を利用したプルーム通過時間帯決定によるモニタリングポスト測定値を用いた空気中$$^{131}$$I濃度推定手法の改良

山田 純也; 橋本 周; 瀬谷 夏美; 羽場 梨沙; 武藤 保信; 清水 武彦; 高崎 浩司; 横山 須美*; 下 道國*

保健物理, 52(1), p.5 - 12, 2017/03

本研究では、現在開発が進められているモニタリングポスト測定値を用いた迅速性のある空気中$$^{131}$$I濃度推定手法を改良することを目的としている。本推定手法はモニタリングポストのNaI(Tl)検出器で測定した空気由来の$$^{131}$$I計数率に、濃度換算係数を乗ずることで空気中$$^{131}$$I濃度を推定するものである。先行研究では、空気由来の$$^{131}$$I計数率を弁別するために必要となるプルーム通過時間帯の決定方法の不確定性により、推定精度が低下することが指摘されていた。本研究では、沈着のない$$^{133}$$Xe計数率の時間変化からプルーム通過時間帯を決定する方法を考案し、開発中の空気中$$^{131}$$I濃度推定手法に適用した。その結果、空気中$$^{131}$$I濃度の推定値は実測値に対しファクタ3以内になることを示した。

報告書

「もんじゅ」の原子炉格納容器全体漏えい率試験に対する代替露点検出器の実証試験

市川 正一; 千葉 悠介; 大野 史靖; 羽鳥 雅一; 小林 孝典; 上倉 亮一; 走利 信男*; 犬塚 泰輔*; 北野 寛*; 阿部 恒*

JAEA-Research 2016-021, 32 Pages, 2017/02

JAEA-Research-2016-021.pdf:5.0MB

日本原子力研究開発機構は、高速増殖原型炉もんじゅのプラント工程への影響を低減するため、現在、原子炉格納容器全体漏えい率試験で用いている塩化リチウム式露点検出器の代替品として、静電容量式露点検出器の検証試験を実施した。原子炉格納容器全体漏えい率試験(試験条件: 窒素雰囲気、24時間)における静電容量式露点検出器の測定結果は、既存の塩化リチウム式検出器と比較して有意な差は無かった。また、長期検証試験(試験条件: 空気雰囲気、2年間)においては、静電容量式露点検出器は、高精度鏡面式露点検出器との比較の結果、「電気技術規程(原子力編)」の「原子炉格納容器の漏えい率試験規程」に基づく使用前検査時に要求される機器精度(精度: $$pm$$2.04$$^{circ}$$C)を長期間にわたり有することを確認した。

論文

The Belle II SVD data readout system

Thalmeier, R.*; 谷田 聖; 他97名*

Nuclear Instruments and Methods in Physics Research A, 845, p.633 - 638, 2017/02

 被引用回数:1 パーセンタイル:64.68(Instruments & Instrumentation)

The Belle II Experiment at the High Energy Accelerator Research Organization (KEK) in Tsukuba, Japan, will explore the asymmetry between matter and antimatter and search for new physics beyond the standard model. 172 double-sided silicon strip detectors are arranged cylindrically in four layers around the collision point to be part of a system which measures the tracks of the collision products of electrons and positrons. A total of 1748 radiation-hard APV25 chips read out 128 silicon strips each and send the analog signals by time-division multiplexing out of the radiation zone to 48 Flash Analog Digital Converter Modules (FADC). Each of them applies processing to the data; for example, it uses a digital finite impulse response filter to compensate line signal distortions, and it extracts the peak timing and amplitude from a set of several data points for each hit, using a neural network. We present an overview of the SVD data readout system, along with front-end electronics, cabling, power supplies and data processing.

論文

The Belle II silicon vertex detector assembly and mechanics

Adamczyk, K.*; 谷田 聖; Belle-II SVD Collaboration*; 他97名*

Nuclear Instruments and Methods in Physics Research A, 845, p.38 - 42, 2017/02

 パーセンタイル:100(Instruments & Instrumentation)

The Belle II experiment at the asymmetric SuperKEKB collider in Japan will operate at an instantaneous luminosity approximately 50 times greater than its predecessor (Belle). The central feature of the experiment is a vertex detector comprising two layers of pixelated silicon detectors (PXD) and four layers of double-sided silicon microstrip detectors (SVD). One of the key measurements for Belle II is CP violation asymmetry in the decays of beauty and charm hadrons, which hinges on a precise charged-track vertex determination and low-momentum track measurement. Towards this goal, a proper assembly of the SVD components with precise alignment ought to be performed and the geometrical tolerances should be checked to fall within the design limits. We present an overview of the assembly procedure that is being followed, which includes the precision gluing of the SVD module components, wire-bonding of the various electrical components, and precision 3D coordinate measurements of the final SVD modules.

論文

Field test of a full scale $$^{3}$$He-alternative HLNC-type counter; High Level Neutron counter-Boron (HLNB)

Henzlova, D.*; Menlove, H. O.*; 谷川 聖史; 向 泰宣; 中村 仁宣

EUR-28795-EN (Internet), p.313 - 323, 2017/00

ロスアラモス国立研究所(LANL)は、$$^{3}$$Heガス供給の枯渇問題に対応するため、新たに開発したホウ素(B-10)を用いた平板状の比例計数管を使用した$$^{3}$$Heフリーの中性子検出器(HLNB:高レベル中性子同時計数装置(B-10))を設計、試作した。これは、代表的な$$^{3}$$He型の中性子検出器の代替品として製作したものである。本論文では、実際のフィールドにおける保障措置機器としての適用性を確認するため、プルトニウム転換技術開発施設(PCDF)において、少量のMOX試料粉末を使用したHLNBの性能評価試験を実施した。その結果、HLNBは300秒の測定時間で2.1%の良好の測定精度を得ることができ、保障措置に適用する中性子同時計数装置としての国際性能指標を満足することできることが分かった。

論文

Measurement of radioactive contamination on work clothing of workers engaged in decontamination operations

辻村 憲雄; 吉田 忠義; 星 勝也

JPS Conference Proceedings (Internet), 11, p.070003_1 - 070003_7, 2016/11

To rationally judge the necessity of the contamination screening measurements required in the decontamination work regulations, a field study of the surface contamination density on the clothing of the workers engaged in decontamination operations was performed. The clothing and footwear of 20 workers was analyzed by high-purity germanium (HPGe) $$gamma$$-ray spectroscopy. The maximum radiocesium activities ($$^{134}$$Cs + $$^{137}$$Cs) observed were 3600, 1300, and 2100 Bq for the work clothing, gloves, and boots, respectively, and the derived surface contamination densities were below the regulatory limit of 40 Bq/cm$$^{2}$$. The results of this field study suggest that the upper bounds of the surface contamination density on the work clothing, gloves, and boots are predictable from the maximum soil loading density on the surface of clothing and footwear and the radioactivity concentration in soil at the site.

論文

$$^3$$He代替非破壊分析装置の開発; 迫り来る$$^3$$Heクライシスの解決を目指して

小泉 光生; 坂佐井 馨; 呉田 昌俊; 中村 仁宣

日本原子力学会誌, 58(11), p.642 - 646, 2016/11

核セキュリティ、保障措置分野では、核分裂に伴う中性子を検出する検認装置として$$^3$$He検出器を利用したものが広く利用されている。検出器に利用される$$^3$$Heガスは、主に米国におけるストックから供給されてきたが、2001年9月11日の同時多発テロ以後、大量の$$^3$$He中性子検知装置を米国内に配備したことから、在庫が減少し、供給が近い将来停止する状況になりつつあった。そうした中、2011年3月末の$$^3$$He代替中性子検出技術に関するワークショップにおけるIAEAの$$^3$$He代替非破壊分析装置開発の呼びかけに応じ、原子力機構においても、J-PARCセンターが開発したZnS/$$^{10}$$B$$_2$$O$$_3$$セラミックシンチレータをベースに$$^3$$He代替検出器の開発を行い、平成27年3月には、開発した中性子検出装器の性能試験及びそれを実装した核物質検認用非破壊分析(Non-Destructive Assay (NDA))装置の性能実証試験を実施した。本解説では、開発した検出器、代替NDA装置を紹介し、あわせて$$^3$$He問題の顛末を報告する。

論文

Charge-collection efficiency of single-crystal CVD diamond detector for low-energy charged particles with energies ranging from 100 keV to 2 MeV

佐藤 優樹; 村上 浩之*; 嶋岡 毅紘*; 坪田 雅功*; 金子 純一*

Nuclear Instruments and Methods in Physics Research A, 834, p.218 - 222, 2016/10

 パーセンタイル:100(Instruments & Instrumentation)

The performance of a diamond detector created from a single-crystal diamond grown by chemical vapor deposition was studied for application in detecting charged particles having energies ranging from 100 keV to 2 MeV. Energy peaks of these low-energy ions were clearly observed. However, we observed that the pulse height for individual incident ions decreases with increasing atomic number of the ions. We estimated the charge collection efficiency of the generated charge carriers by the incident charged particles. While charge collection efficiency above 95% is achieved for helium (He$$^+$$) at energies above 1.5 MeV, over the same incident energy range, the efficiencies are lower for heavy-ions: $$sim$$70% for silicon (Si$$^+$$) and $$sim$$30% for gold (Au$$^{3+}$$). We also found that the charge collection efficiency decreases as the generated charge density inside the diamond crystal increases.

論文

Fano factor evaluation of diamond detectors for alpha particles

嶋岡 毅紘*; 金子 純一*; 佐藤 優樹; 坪田 雅功*; 新名 宏明*; 茶谷原 昭義*; 渡辺 幸志*; 梅沢 仁*; 杢野 由明*

Physica Status Solidi (A), 213(10), p.2629 - 2633, 2016/10

 被引用回数:1 パーセンタイル:88.02(Materials Science, Multidisciplinary)

This report is the first describing experimental evaluation of Fano factor for diamond detectors. High-quality self-standing chemical vapor deposited diamond samples were produced using lift-off method. Alpha-particle induced charge measurements were taken for three samples. A 13.1 eV $$pm$$ 0.07 eV of the average electron-hole pair creation energy and excellent energy resolution of approximately 0.3$$%$$ were found for 5.486 MeV alpha particles from an $$^{241}$$Am radioactive source. The best Fano factor for 5.486 MeV alpha particles calculated from experimentally obtained epsilon values and the detector intrinsic energy resolution was 0.382 $$pm$$ 0.007.

論文

A Bonding study toward the quality assurance of Belle-II silicon vertex detector modules

Kang, K. H.*; 谷田 聖; Belle-II SVD Collaboration*; 他94名*

Nuclear Instruments and Methods in Physics Research A, 831, p.213 - 220, 2016/09

 パーセンタイル:100(Instruments & Instrumentation)

A silicon vertex detector (SVD) for the Belle-II experiment comprises four layers of double-sided silicon strip detectors (DSSDs), assembled in a ladder-like structure. Each ladder module of the outermost SVD layer has four rectangular and one trapezoidal DSSDs supported by two carbon-fiber ribs. In order to achieve a good signal-to-noise ratio and minimize material budget, a novel chip-on-sensor "Origami" method has been employed for the three rectangular sensors that are sandwiched between the backward rectangular and forward (slanted) trapezoidal sensors. This paper describes the bonding procedures developed for making electrical connections between sensors and signal fan-out flex circuits (i.e., pitch adapters), and between pitch adapters and readout chips as well as the results in terms of the achieved bonding quality and pull force.

論文

Belle II SVD ladder assembly procedure and electrical qualification

Adamczyk, K.*; 谷田 聖; 他94名*

Nuclear Instruments and Methods in Physics Research A, 824, p.381 - 383, 2016/07

 パーセンタイル:100(Instruments & Instrumentation)

The Belle II experiment at the SuperKEKB asymmetric $$e^+e^-$$ collider in Japan will operate at a luminosity approximately 50 times larger than its predecessor (Belle). At its heart lies a six-layer vertex detector comprising two layers of pixelated silicon detectors (PXD) and four layers of double-sided silicon microstrip detectors (SVD). One of the key measurements for Belle II is time-dependent CP violation asymmetry, which hinges on a precise charged-track vertex determination. Towards this goal, a proper assembly of the SVD components with precise alignment ought to be performed and the geometrical tolerances should be checked to fall within the design limits. We present an overview of the assembly procedure that is being followed, which includes the precision gluing of the SVD module components, wire-bonding of the various electrical components, and precision three dimensional coordinate measurements of the jigs used in assembly as well as of the final SVD modules.

論文

The Silicon vertex detector of the Belle II experiment

Adamczyk, K.*; 谷田 聖; 他94名*

Nuclear Instruments and Methods in Physics Research A, 824, p.406 - 410, 2016/07

 被引用回数:2 パーセンタイル:57.25(Instruments & Instrumentation)

The silicon vertex detector of the Belle II experiment, structured in a lantern shape, consists of four layers of ladders, fabricated from two to five silicon sensors. The APV25 readout ASIC chips are mounted on one side of the ladder to minimize the signal path for reducing the capacitive noise; signals from the sensor backside are transmitted to the chip by bent flexible fan-out circuits. The ladder is assembled using several dedicated jigs. Sensor motion on the jig is minimized by vacuum chucking. The gluing procedure provides such a rigid foundation that later leads to the desired wire bonding performance. The full ladder with electrically functional sensors is consistently completed with a fully developed assembly procedure, and its sensor offsets from the design values are found to be less than 200 $$mu$$m. The potential functionality of the ladder is also demonstrated by the radioactive source test.

論文

Belle-II VXD radiation monitoring and beam abort with sCVD diamond sensors

Adamczyk, K.*; 谷田 聖; 他94名*

Nuclear Instruments and Methods in Physics Research A, 824, p.480 - 482, 2016/07

 被引用回数:1 パーセンタイル:76.09(Instruments & Instrumentation)

The Belle-II VerteX Detector (VXD) has been designed to improve the performances with respect to Belle and to cope with an unprecedented luminosity of 8$$times$$10$$^{35}$$cm$$^{-2}$$s$$^{-1}$$ achievable by the SuperKEKB. Special care is needed to monitor both the radiation dose accumulated throughout the life of the experiment and the instantaneous radiation rate, in order to be able to promptly react to sudden spikes for the purpose of protecting the detectors. A radiation monitoring and beam abort system based on single-crystal diamond sensors is now under an active development for the VXD. The sensors will be placed in several key positions in the vicinity of the interaction region. The severe space limitations require a challenging remote readout of the sensors.

論文

Charge-collection efficiency and long-term stability of single-crystal CVD diamond detector under different carrier-drift conditions

佐藤 優樹; 村上 浩之*; 嶋岡 毅紘*; 坪田 雅功*; 金子 純一*

Japanese Journal of Applied Physics, 55(4), p.046401_1 - 046401_5, 2016/04

 被引用回数:1 パーセンタイル:88.37(Physics, Applied)

化学気相成長法(CVD)により育成した人工単結晶ダイヤモンドを用いて放射線検出器を製作し、検出器のエネルギー分解能、生成電荷キャリアの収集効率、及び長時間安定性の調査を行った。検出器固有のエネルギー分解能は半値幅で約0.4%であり、$$^{241}$$Amから放出される4つのエネルギー(5.389, 5.443, 5.486及び5.545MeV)の$$alpha$$粒子の観測ができた。電荷キャリアの収集効率は電子、正孔ともに98%を達成し、さらに、主として電子を検出器内でドリフトさせた場合、100時間以上の$$alpha$$粒子照射でもエネルギースペクトルや分解能の劣化は見られなかった。一方で、主として正孔を検出器内でドリフトさせた場合、照射時間と共にエネルギースペクトルが劣化するポーラリゼイション現象が観測された。

論文

Construction and test of the first Belle II SVD ladder implementing the origami chip-on-sensor design

Irmler, C.*; 谷田 聖; 他98名*

Journal of Instrumentation (Internet), 11(1), p.C01087_1 - C01087_9, 2016/01

 被引用回数:4 パーセンタイル:51.49(Instruments & Instrumentation)

The Belle II Silicon Vertex Detector comprises four layers of double-sided silicon strip detectors (DSSDs), consisting of ladders with two to five sensors each. All sensors are individually read out by APV25 chips with the Origami chip-on-sensor concept for the central DSSDs of the ladders. The chips sit on flexible circuits that are glued on the top of the sensors. This concept allows a low material budget and an efficient cooling of the chips by a single pipe per ladder. We present the construction of the first SVD ladders and results from precision measurements and electrical tests.

論文

EMC studies for the vertex detector of the Belle II experiment

Thalmeier, R.*; 谷田 聖; 他102名*

Journal of Instrumentation (Internet), 11(1), p.C01044_1 - C01044_10, 2016/01

 被引用回数:1 パーセンタイル:85.87(Instruments & Instrumentation)

The upgrade of the Belle II experiment plans to use a vertex detector based on two different technologies, DEPFET pixel (PXD) technology and double side silicon microstrip (SVD) technology. The vertex electronics are characterized by the topology of SVD bias that forces to design a sophisticated grounding because of the floating power scheme. The complex topology of the PXD power cable bundle may introduce some noise inside the vertex area. This paper presents a general overview of the EMC issues present in the vertex system, based on EMC tests on an SVD prototype and a study of noise propagation in the PXD cable bundle based on Multi-conductor transmission line theory.

435 件中 1件目~20件目を表示