Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nagaya, Yasunobu
EPJ Nuclear Sciences & Technologies (Internet), 11, p.1_1 - 1_7, 2025/01
Japan Atomic Energy Agency (JAEA) has been developing a general-purpose continuous-energy Monte Carlo code MVP for nuclear reactor core analysis. Recently improvements to MVP have been focused on the development of an advanced neutronics/thermal-hydraulics coupling code. JAEA has also developed a new Monte Carlo solver Solomon for criticality safety analysis. Solomon aims to calculate the criticality of a damaged reactor core including fuel debris. This paper provides an overview of the capabilities and reviews recent applications of MVP and Solomon.
Tobita, Yoshiharu; Tagami, Hirotaka; Ishida, Shinya; Onoda, Yuichi; Sogabe, Joji; Okano, Yasushi
IAEA-TECDOC-2079, p.72 - 84, 2025/00
Since the fast reactor core is not in the maximum reactivity configuration, a hypothetical core disruptive accident could lead to the prompt criticality due to a change in the core material configuration, and the resulting energy generation has been one of the issues in fast reactor safety, and therefore appropriate measures are needed to mitigate and contain the effect of energy generated in the accident. In order to assess the effectiveness of these mitigative measures, a set of computer codes to analyze the event progressions and energy generation behavior in the ATWS of fast reactors have been developed, maintained, and improved under international collaboration in JAEA. Since the important physical phenomena, which govern the event progression, vary along with the progression of the accident, the whole accident process is divided into several phases in the analysis of accident, and dedicated analysis methods for each phase are provided to analyze the event progression in each phase. The organization and overview of these analysis methods are described in this paper. As a representative example of the validation approaches in applying these analysis methods to the reactor safety assessment in licensing procedure in Japan, the validation studies to confirm the applicability to reactor analysis of the SIMMER code for analyzing core material movement and reactor power, which is important to analyze the energy generation in the accident, are presented in the paper. The validation studies of the SIMMER code confirmed the applicability of SIMMER to the reactor analysis, while the critical phenomena that the effect of their uncertainty in the reactor analysis should be checked were also recognized.
Yoshida, Kazuo; Hiyama, Mina*; Tamaki, Hitoshi
JAEA-Research 2024-007, 24 Pages, 2024/08
JAEA-Research-2024-007.pdf:2.1MB
An accident of evaporation to dryness by boiling of high-level radioactive liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into the atmosphere. Accurate quantitative estimation of released Ru is one of the important issues for risk assessment of those facilities. It has been observed experimentally that volatility of RuO
is suppressed by HNO
generated by HNO
radiolysis. The analysis of chemical reactions of NO
including HNO and HNO in the waste tank is essential to simulate of these phenomena. To resolve this issue, an analytical approach has been attempted to couple dynamically two computer codes SHAWED and SCHERN. The simulation of boiling behavior in the tank is conducted with SHAWED. SCHERN simulates chemical behaviors of HNO, HNO and NO in the tank. A programmatic coupling algorithm and a trial simulation of the accident are presented in this report.
Ono, Ayako; Okamoto, Kaoru*; Makino, Yasushi*; Hosokawa, Shigeo*; Yoshida, Hiroyuki
Proceedings of Specialist Workshop on Advanced Instrumentation and Measurement Techniques for Nuclear Reactor Thermal-Hydraulics and Severe Accidents (SWINTH-2024) (USB Flash Drive), 13 Pages, 2024/06
JAEA has been developing an advanced neutronic/thermal-hydraulics coupling simulation system. In the coupling simulation system, the detailed thermal-hydraulics codes based on an interface-capturing method (JUPITER or TPFIT) will be adopted to simulate thermal-hydraulics behavior in a fuel bundle. The experimental data and findings relating to the gas-liquid two-phase flow in a fuel bundle are especially required to validate JUPITER/TPFIT. In this study, we therefore develop a measurement method by combining Laser-Doppler Velocimetry (LDV) and photodiodes, which can access to a small flow channel such as a subchannel of a fuel bundle. The developed measurement method is validated by comparison with the measument by a electrical conductance probe. Finally, we obtain experimental data on local flow structures and interactions between gas and liquid phases. The developed measurement method is actually applied to an air-water dispersed bubbly flow to confirm its capability.
Ishida, Shinya; Tagami, Hirotaka; Okano, Yasushi; Yamano, Hidemasa; Kubo, Shigenobu; Tobita, Yoshiharu
Proceedings of 11th European Review Meeting on Severe Accident Research Conference (ERMSAR 2024) (Internet), 10 Pages, 2024/05
Murakami, Kenta*; Arai, Taku*; Yamada, Koji*; Momma, Kensuke*; Tsuji, Takashi*; Nakagawa, Nobuyuki*; Onizawa, Kunio
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 3 Pages, 2024/03
This paper studied the future vision of codes and standards in Japan by systematically comparing Japanese regulatory rules, standards, and industry guides related to long term operation with international safety standards, and confirmed that the Japanese standard system generally meets their recommendations. The recommendation for the future improvements of Japanese codes and standards were summarized into five items.
Taniguchi, Yoshinori; Mihara, Takeshi; Kakiuchi, Kazuo; Udagawa, Yutaka
Annals of Nuclear Energy, 195, p.110144_1 - 110144_11, 2024/01
Times Cited Count：0 Percentile：0.00(Nuclear Science & Technology)Nakamura, Izumi*; Otani, Akihito*; Okuda, Yukihiko; Watakabe, Tomoyoshi; Takito, Kiyotaka; Okuda, Takahiro; Shimazu, Ryuya*; Sakai, Michiya*; Shibutani, Tadahiro*; Shiratori, Masaki*
Dai-10-Kai Kozobutsu No Anzensei, Shinraisei Ni Kansuru Kokunai Shimpojiumu (JCOSSAR2023) Koen Rombunshu (Internet), p.143 - 149, 2023/10
In 2019, the JSME Code Case for seismic design of nuclear power plant piping systems was published. The Code Case provides the strain-based fatigue criteria and detailed inelastic response analysis procedure as an alternative design rule to the current seismic design, which is based on the stress evaluation by elastic response analysis. In 2022, it was approved to revise the Code Case with improving the cycle counting method for fatigue evaluation to the Rain flow method. In addition, the discussion to incorporate the elastic-plastic behavior of support structures is now in progress for the next revision of the Code Case. This paper discusses the contents and background of the 2022 revision, the progress of the next revision, and future tasks.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2023-001, 26 Pages, 2023/05
JAEA-Research-2023-001.pdf:1.61MB
An accident of evaporation to dryness by boiling of high-level radioactive liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into the atmosphere. Accurate quantitative estimation of released Ru is one of the important issues for risk assessment of those facilities. To resolve this issue, an analytical approach has been developed using computer simulation programs to assess the radioactive source term from those facilities. The proposed approach consists analyses with three computer programs. At first, the simulation of boiling behavior in the HLLW tank is conducted with SHAWED code. Next step, the thermal-hydraulic behavior in the facility building is simulated with MELCOR code based on the results at the first step simulation such as flowed out mixed steam flow rate, temperature and volatilized Ru from the tank. The final analysis step is carried out for estimating amount of released radioactive materials with SCHERN computer code which simulates chemical behaviors of nitric acid, nitrogen oxide and Ru based on the condition also simulated MELCOR. Series of sample simulations of the accident at a hypothetical typical facility are presented with the data transfer between those codes in this report.
Li, C.-Y.; Watanabe, Akira*; Uchibori, Akihiro; Okano, Yasushi
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 10 Pages, 2023/05
Collaborative Laboratories for Advanced Decommissioning Science; Tohoku University*
JAEA-Review 2022-063, 86 Pages, 2023/02
JAEA-Review-2022-063.pdf:3.81MB
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2019, this report summarizes the research results of the "The study of oxidative stress status in the organs exposed to low dose/low dose-rate radiation" conducted from FY2019 to FY2021. Since the final year of this proposal was FY2021, the results for three fiscal years were summarized. The present study aims to investigate the biological effects of low dose/low dose-rate radiation exposure, which is of great social interest, on the oxidative stress status of individual organs and will contribute to the collection of scientific data in a dose range to be required. The samples to be analyzed in this study were collected from wild Japanese macaques exposed in the ex-evacuation zone after the accident of 1F.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2022-011, 37 Pages, 2022/12
JAEA-Research-2022-011.pdf:2.88MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents at a fuel reprocessing plant. Two major mechanisms are expected for fission products (FPs) transfer from liquid to vapor phase. One is non-volatiles FPs transfer in the form of mists to the vapor phase in the tank, the other is volatilization of such as Ruthenium. These FPs transferred to the vapor phase in the tank could be released with water and nitric-acid mixed steam and NO gas flow to the environment. NO is generated from denitration of nitrate fission products during dry out phase. These phenomena occurred in this accident originate from the liquid waste boiling in the tank. It is essential for the risk assessment of this accident to simulate thermo-hydraulic and chemical behaviors in the waste tank quantitatively with a versatile computer program. The SHAWED (
imulation of 
igh-level radio
ctive 
aste 
vaporation and 
ryness) has been developed to realize these requirements. In this report, detailed description of major analytical models is explained based on the features of this accident, and some simulation examples are also described for the use in an actual risk assessment.
Simanullang, I. L.*; Nakagawa, Naoki*; Ho, H. Q.; Nagasumi, Satoru; Ishitsuka, Etsuo; Iigaki, Kazuhiko; Fujimoto, Nozomu*
Annals of Nuclear Energy, 177, p.109314_1 - 109314_8, 2022/11
Times Cited Count：0 Percentile：0.00(Nuclear Science & Technology)Nakamura, Hideo; Bentaib, A.*; Herranz, L. E.*; Ruyer, P.*; Mascari, F.*; Jacquemain, D.*; Adorni, M.*
Proceedings of International Conference on Topical Issues in Nuclear Installation Safety; Strengthening Safety of Evolutionary and Innovative Reactor Designs (TIC 2022) (Internet), 10 Pages, 2022/10
Kato, Shinya; Matsuba, Kenichi; Kamiyama, Kenji; Akaev, A.*; Vurim, A.*; Baklanov, V.*
Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 12 Pages, 2022/09
The In-Vessel Retention (IVR) of molten-core in Core Disruptive Accidents (CDAs) is of prime importance in enhancing the safety of sodium-cooled fast reactors. One of the main subjects in ensuring IVR is to design the Control Rod Guide Tube (CRGT) which allows effective discharge of molten core materials from the core region. The effectiveness of the CRGT design is assessed through CDA analyses, and it is reasonable for these analyses to develop a computer code collaborated with experimental researches. Thus, experiments addressing the discharge behavior of the molten-core materials through the CRGT have proceeded as one of the subjects in the collaboration research named the EAGLE-3 project, and the obtained experimental results are reflected in the development of the SIMMER code. In this project, a series of out-of-pile tests using molten-alumina as the fuel simulant was conducted to understand the discharge behavior of molten-core materials through the CRGT. In this study, in order to investigate the effect of an internal structure in the CRGT on the discharge behavior of the molten-core materials, the data of an out-of-pile test in which the molten-alumina penetrated to a duct with the internal structure were analyzed. In addition, the post-test analysis using the SIMMER code was conducted and the results were compared with the test results.
Li, C.-Y.; Watanabe, Akira*; Uchibori, Akihiro; Okano, Yasushi
Dai-26-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 4 Pages, 2022/07
Identifying accident scenarios that could lead to severe accidents and evaluating their frequency of occurrence are essential issues. This study aims to establish the methodology of the dynamic Probabilistic Risk Assessment (PRA) for sodium-cooled fast reactors that can consider the time dependency and the interdependence of each event. Specifically, the Continuous Markov chain Monte Carlo (CMMC) method is newly applied to the SPECTRA code, which analyzes the severe accident conditions of nuclear reactors, to develop an evaluation methodology for typical external hazards. Currently, a fault-tree model of air coolers of decay heat removal system is implemented as the CMMC method, and a series of preliminary analysis of the plant's transient characteristics under the scenario of volcanic ashfall has been conducted.
Thwe Thwe, A.; Terada, Atsuhiko; Hino, Ryutaro; Nagaishi, Ryuji; Kadowaki, Satoshi
Journal of Nuclear Science and Technology, 59(5), p.573 - 579, 2022/05
Times Cited Count：0 Percentile：0.00(Nuclear Science & Technology)The simulations of the combustion of self-propagating hydrogen-air premixed flame are performed by an open-source CFD code. The flame propagation behavior, flame radius, temperature and pressure are analyzed by varying the initial laminar flame speed and grid size. When the initial laminar speed increases, the thermal expansion effects become strong which leads the increase of flame radius along with the increase of flame surface area, flame temperature and pressure. A new laminar flame speed model derived previously from the results of experiment is also introduced to the code and the obtained flame radii are compared with those from the experiments. The formation of cellular flame fronts is captured by simulation and the cell separation on the flame surface vividly appears when the gird resolution becomes sufficiently higher. The propagation behavior of cellular flame front and the flame radius obtained from the simulations have the reasonable agreement with the previous experiments.
Malins, A.; Lemoine, T.*
Journal of Open Source Software (Internet), 7(71), p.3318_1 - 3318_6, 2022/03
Collaborative Laboratories for Advanced Decommissioning Science; Tohoku University*
JAEA-Review 2021-050, 82 Pages, 2022/01
JAEA-Review-2021-050.pdf:2.89MB
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2020. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2019, this report summarizes the research results of the "The study of oxidative stress status in the organs exposed to low dose/low dose-rate radiation" conducted in FY2020. The present study aims to investigate the biological effects of low dose/low dose-rate radiation exposure, which is of great social interest, on the oxidative stress status of individual organs and will contribute to the collection of scientific data in a dose range to be required. An interdisciplinary collaborative study discussed the correlation between radiation dose and the biological effect by analyzing the samples of wild Japanese macaques exposed to radiation due to the accident of Fukushima Daiichi Nuclear Power Station and of animal experiments.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2021-013, 20 Pages, 2022/01
JAEA-Research-2021-013.pdf:2.35MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into atmosphere. An idea has been proposed to implement a steam condenser as an accident countermeasure. This measure is expected to prevent nitric acid steam diffusing in facility building and to increase gaseous Ru trapping ratio into condensed water. A simulation study has been carried out with a hypothetical typical facility building to analyze the efficiency of steam condenser. In this study, SCHERN computer code simulates chemical behaviors of Ru in nitrogen oxide, nitric acid and water mixed vapor based on the conditions obtained from simulation with thermal-hydraulic computer code MELCOR. The effectiveness of steam condenser has been analyzed quantitively in preventing mixed vapor diffusion and gaseous Ru trapping effect. Some issues to be solved in analytical model has been also clarified in this study.
