Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Oka, Kiyoshi
Reza Kenkyu, 31(9), p.612 - 617, 2003/09
no abstracts in English
Yamamoto, Kazuyoshi; Kumada, Hiroaki; Kishi, Toshiaki; Torii, Yoshiya; Endo, Kiyoshi*; Yamamoto, Tetsuya*; Matsumura, Akira*; Uchiyama, Junzo; Nose, Tadao*
JAERI-Tech 2002-092, 23 Pages, 2002/12
JAERI-Tech-2002-092.pdf:5.22MB
Thermal neutron flux is determined using the gold wires in current BNCT irradiation, so evaluation of arbitrary points after the irradiation is limited in the quantity of these detectors. In order to make up for the weakness, dose estimation of a patient is simulated by a computational dose calculation supporting system. In another way without computer simulation, a medical irradiation condition can be replicate experimentally using of realistic phantom which was produced from CT images by rapid prototyping technique. This phantom was irradiated at a same JRR-4 neutron beam as clinical irradiation condition of the patient and the thermal neutron distribution on the brain surface was measured in detail. This experimental evaluation technique using a realistic phantom is applicable to in vitro cell irradiation experiments for radiation biological effects as well as in-phantom experiments for dosimetry under the nearly medical irradiation condition of patient.
Ioka, Ikuo; Kuriki, Yoshiro*; Iwatsuki, Jin; Kubo, Shinji; Inagaki, Yoshiyuki; Sakaba, Nariaki
no journal, ,
Hydrogen is one of the promising major energy sources in the future. IS process is one of candidates for the large-scale production of hydrogen using heat from solar power. Severe corrosive environment which is thermal decomposition of sulfuric acid exists in the IS process. To achieve a massive hydrogen production system, one of the key factors is the development of structural materials. A hybrid material that combined the corrosion-resistant and the pressure-resistant functions was made by a plasma spraying and laser treatment. The flat specimen of the hybrid material showed enough corrosion resistance in boiling sulfuric acid. To confirm the applicability of the hybrid material as the structural material, corrosion tests were performed in 98 wt.% boiling sulfuric acid using round bar specimens with the curved surface. The specimens showed enough corrosion resistance in boiling sulfuric acid though some cracks were observed in the surface layer from the cross section observation.
Ioka, Ikuo; Kuriki, Yoshiro*; Iwatsuki, Jin; Kubo, Shinji; Inagaki, Yoshiyuki; Sakaba, Nariaki
no journal, ,
IS process is one of candidates for the large-scale production of hydrogen. Thermal decomposition of sulfuric acid exists in the IS process. A hybrid material with the corrosion-resistance and the ductility was made by a plasma spraying and laser treatment. The specimen had excellent corrosion resistance in the condition of 95 mass% boiling sulfuric acid. The corrosion rate of the specimen in 47 mass% boiling sulfuric acid was fifty times higher than that in 95 mass% boiling sulfuric acid. It seems that the cracks of the surface layer weren't sealed up perfectly in the condition of 47 mass% boiling sulfuric acid. To improve the corrosion resistance of the specimen, the specimen was treated with a thermal treatment for pre-oxidation. The pre-oxidized specimen got superior corrosion resistance in the condition of 47 mass% boiling sulfuric acid. It was confirmed that the pre-oxidation was effective in improving corrosion resistance of the specimen.
