Quantifying uncertainty induced by scattering angle distribution using maximum entropy method

Maruyama, Shuhei; Yamamoto, Akio*; Endo, Tomohiro*

Annals of Nuclear Energy, 205, p.110591_1 - 110591_13, 2024/09

https://doi.org/10.1016/j.anucene.2024.110591

Recent status of the cryogenic sample environment at the MLF, J-PARC

Ishikado, Motoyuki*; Takahashi, Ryuta*; Yamauchi, Yasuhiro*; Nakamura, Masatoshi*; Ishimaru, Sora*; Yamauchi, Sara*; Kawamura, Seiko; Kira, Hiroshi*; Sakaguchi, Yoshifumi*; Watanabe, Masao; et al.

JPS Conference Proceedings (Internet), 41, p.011010_1 - 011010_7, 2024/05

https://doi.org/10.7566/JPSCP.41.011010

First demonstration of a single-end readout position-sensitive optical fiber radiation sensor inside the Fukushima Daiichi Nuclear Power Station based on wavelength-resolving analysis

Terasaka, Yuta; Sato, Yuki; Uritani, Akira*

Nuclear Instruments and Methods in Physics Research A, 1062, p.169227_1 - 169227_6, 2024/05

https://doi.org/10.1016/j.nima.2024.169227

Time-dependent change in occurrence rate of steam generator tube leak in sodium-cooled fast reactors; Phenix and BN-600

Kurisaka, Kenichi

Mechanical Engineering Journal (Internet), 11(2), p.23-00377_1 - 23-00377_14, 2024/04

https://doi.org/10.1299/mej.23-00377

This study aims to understand the time-dependent change in the occurrence rate of leak from steam generator (SG) tubes in sodium-cooled fast reactors (SFRs). The target SFRs in the present paper are Phenix in France and BN-600 in Russia. By reviewing publicly available literature that show data from the SFRs, we have investigated the numbers of tube-to-tubeplate welds and tube-to-tube welds, heat transfer areas of tube base metal, operating hours of SGs, dates when SG tube leak occurred, locations of leak, and corrective actions taken after tube leak events, such as replacement of the module, in which a leak occurred. Based on these, we have estimated the time to leak and quantitatively analyzed the time-dependent change of the occurrence rates of SG tube leak for each of the above-mentioned parts by hazard plotting method. The results show that the rates of both Phenix and BN-600 decreased over time. For Phenix, this is probably thanks to improved welding and SG operating conditions. For BN-600, it seems that in many cases, the probable cause of the leak was initial defects that developed to failure during the early stage of reactor operation, and that no special countermeasure was taken in the later stages. Therefore, it would be natural to assume that the rate simply decreased over time. The rate of leak at tube-to-tube welds in Phenix shows significant increase in a short term after a certain period of time. This can be caused by thermal stress repeatedly exerted on the materials.

Background radiation monitoring via manned helicopter and development of technology for radiation monitoring via unmanned airplane for application of nuclear emergency response technique in the fiscal year 2022 (Contract research)

Futemma, Akira; Sanada, Yukihisa; Sasaki, Miyuki; Kawasaki, Yoshiharu*; Iwai, Takeyuki*; Hiraga, Shogo*; Haginoya, Masashi*; Matsunaga, Yuki*; Akutsu, Yuichiro*; Arai, Yoshinori*; et al.

JAEA-Technology 2023-026, 161 Pages, 2024/03

JAEA-Technology-2023-026.pdf:14.66MB

By the accident at Tokyo Electric Power Company's (TEPCO's) Fukushima Daiichi Nuclear Power Station (FDNPS), caused by tsunami triggered by the 2011 off the Pacific coast of Tohoku Earthquake, a large amount of radioactive material was released into the surrounding environment. After the accident, Airborne Radiation Monitoring (ARM) via manned helicopter has been utilized as a method to quickly and extensively measure radiation distribution surrounding FDNPS. In order to utilize ARM and to promptly provide the results during a nuclear emergency, information on background radiation levels, topographical features, and controlled airspace surrounding nationwide nuclear facilities have been prepared in advance. In the fiscal year 2022, we conducted ARM around the Mihama Nuclear Power Station of Kansai Electric Power Company (KEPCO), the Tsuruga Power Station of Japan Atomic Power Company (JAPC), and the Ikata Power Station of Shikoku Electric Power Company (YONDEN), and prepared information on background radiation doses and controlled airspace. In addition, we have developed an aerial radiation detection system via unmanned airplane, which is expected to be an alternative to ARM, during a nuclear emergency. This report summarizes the results and technical issues identified.

Human resource development related to remote control technology for monitoring inside RPV pedestal during retrieval of fuel debris (Contract research); FY2022 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*

JAEA-Review 2023-023, 99 Pages, 2024/03

JAEA-Review-2023-023.pdf:6.0MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2022. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2019, this report summarizes the research results of the "Human Resource Development Related to Remote Control Technology for Monitoring Inside RPV Pedestal during Retrieval of Fuel Debris" conducted in FY2022. The present study aims to construct a monitoring platform for understanding the status inside a reactor during fuel debris removal, and measurement and visualization by sensors moving on the platform. In addition, to develop research personnel through research education by participating in such research projects, classroom lectures, and facility tours is also a goal of this project. In FY2022, each system was improved and expanded toward the final year, and verification experiments were conducted in simulated environments.

Microstructure and plasticity evolution during Lders deformation in an Fe-5Mn-0.1C medium-Mn steel

Koyama, Motomichi*; Yamashita, Takayuki*; Morooka, Satoshi; Sawaguchi, Takahiro*; Yang, Z.*; Hojo, Tomohiko*; Kawasaki, Takuro; Harjo, S.

Tetsu To Hagane, 110(3), p.197 - 204, 2024/02

https://doi.org/10.2355/tetsutohagane.TETSU-2023-038

Thermal conductivity measurement of uranium-plutonium mixed oxide doped with Nd/Sm as simulated fission products

Horii, Yuta; Hirooka, Shun; Uno, Hiroki*; Ogasawara, Masahiro*; Tamura, Tetsuya*; Yamada, Tadahisa*; Furusawa, Naoya*; Murakami, Tatsutoshi; Kato, Masato

Journal of Nuclear Materials, 588, p.154799_1 - 154799_20, 2024/01

https://doi.org/10.1016/j.jnucmat.2023.154799

The thermal conductivities of near-stoichiometric (U,Pu,Am)O doped with NdO/SmO, which is major fission product (FP) generated by a uranium-plutonium mixed oxides (MOX) fuel irradiation, as simulated fission products are evaluated at 1073-1673 K. The thermal conductivities are calculated from the thermal diffusivities that are measured using the laser flash method. To evaluate the thermal conductivity from a homogeneity viewpoint of Nd/Sm cations in MOX, the specimens with different homogeneity of Nd/Sm are prepared using two kinds of powder made by ball-mill and fusion methods. A homogeneous Nd/Sm distribution decreases the thermal conductivity of MOX with increasing Nd/Sm content, whereas heterogeneous Nd/Sm has no influence. The effect of Nd/Sm on the thermal conductivity is studied using the classical phonon transport model (A+BT). The dependences of the coefficients A and B on the Nd/Sm content (C and C, respectively) are evaluated as: A(mK/W)=1.70 10 + 0.93C + 1.20C, B(m/W)=2.39 10.

Development of a surrogate system of a plant dynamics simulation model and an abnormal situation identification system for nuclear power plants using deep neural networks

Seki, Akiyuki; Yoshikawa, Masanori; Nishinomiya, Ryota*; Okita, Shoichiro; Takaya, Shigeru; Yan, X.

Nuclear Technology, 12 Pages, 2024/00

https://doi.org/10.1080/00295450.2023.2273566

Two types of deep neural network (DNN) systems have been constructed with the intent to assist safety operation of a nuclear power plant. One is a surrogate system (SS) that can estimate physical quantities of a nuclear power plant in a computational time of several orders less than a physical simulation model. The other is an abnormal situation identification system (ASIS) that can estimate the state of the disturbance causing an anomaly from physical quantities of a nuclear power plant. Both systems are trained and tested using data obtained from the analytical code for incore and plant dynamics (ACCORD), which reproduces the steady and dynamic behavior of the actual high Temperature engineering test reactor (HTTR) under various scenarios. The DNN models are built by adjusting, the main hyperparameters. Through these procedures, these systems are shown able to perform with a high degree of accuracy.

Quantitative visualization of a radioactive plume with harmonizing gamma-ray imaging spectrometry and real-time atmospheric dispersion simulation based on 3D wind observation

Nagai, Haruyasu; Furuta, Yoshihiro*; Nakayama, Hiromasa; Satoh, Daiki

Journal of Nuclear Science and Technology, 60(11), p.1345 - 1360, 2023/11

https://doi.org/10.1080/00223131.2023.2197445

A novel monitoring method for the quantitative visualization of 3D distribution of a radioactive plume and source term estimation of released radionuclides is proposed and its feasibility is demonstrated by preliminary test. The proposed method is the combination of gamma-ray imaging spectroscopy with the Electron Tracking Compton Camera (ETCC) and real-time high-resolution atmospheric dispersion simulation based on 3D wind observation with Doppler lidar. The 3D distribution of a specific radionuclide in a target radioactive plume is inversely reconstructed from line gamma-ray images from each radionuclide by several ETCCs located around the target by harmonizing with the air concentration distribution pattern of the plume predicted by real-time atmospheric dispersion simulation. A prototype of the analysis method was developed, showing a sufficient performance in several test cases using hypothetical data generated by numerical simulations of atmospheric dispersion and radiation transport.