検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 1258 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Production rates of long-lived radionuclides $$^{10}$$Be and $$^{26}$$Al under direct muon-induced spallation in granite quartz and its implications for past high-energy cosmic ray fluxes

櫻井 敬久*; 紅林 泰*; 鈴木 颯一郎*; 堀内 一穂*; 高橋 唯*; 堂下 典弘*; 菊地 聡*; 門叶 冬樹*; 岩田 尚能*; 田島 靖*; et al.

Physical Review D, 109(10), p.102005_1 - 102005_18, 2024/05

銀河宇宙線の永年変化は銀河の活動に密接に関係しており、局所的な銀河磁場・星間雲・超新星残骸の近くの環境が反映される。高エネルギー銀河宇宙線によって大気中で生成される高エネルギーミューオンは、深い地層まで透過し、岩石中に放射性同位体を生成する。$$^{10}$$Beや$$^{26}$$Alのような長寿命の放射性核種は岩石中に蓄積されるため、高エネルギーミューオンの収量の長期変動、ひいては数百万年間の高エネルギー銀河宇宙線(GCR)の長期変動の調査に利用できる。本研究では、CERN SPSのCOMPASS実験ラインにて、160GeV/cの正ミューオンを合成石英プレートと花崗岩コアに照射して、岩石中の$$^{10}$$Beと$$^{26}$$Alの生成断面積を測定した。更に、ミューオンが直接起こす核破砕反応とミューオンが生成した二次粒子が引き起こす反応が、岩石中での長寿命核種の生成にそれぞれどの程度寄与するかを明らかにした。

論文

Estimating the corrosion rate of stainless steel R-SUS304ULC in nitric acid media under concentrating operation

入澤 恵理子; 加藤 千明

Journal of Nuclear Materials, 591, p.154914_1 - 154914_10, 2024/04

 被引用回数:0 パーセンタイル:0.05(Materials Science, Multidisciplinary)

核燃料再処理施設における濃縮運転時の溶液組成及び沸騰の変化を考慮して、オーステナイト系ステンレス鋼R-SUS304ULCの腐食量を評価した。オーステナイト系ステンレス鋼R-SUS304ULCは、日本の使用済燃料再処理施設の高放射性廃液濃縮装置の構造材料であり、濃縮運転時に腐食性の高い硝酸溶液を処理する。本研究の結果、カソード反応活性化によるステンレス鋼の腐食速度を加速する要因として、硝酸濃度、酸化性金属イオン濃度、減圧沸騰に着目する必要があることがわかった。

報告書

原子力科学研究所における航空機落下確率に関する評価について

神川 豊; 鈴木 真琴; 安掛 寿紀; 村上 貴彦; 森田 祐介; 椎名 秀徳; 福島 学; 平根 伸彦; 大内 靖弘

JAEA-Technology 2023-030, 57 Pages, 2024/03

JAEA-Technology-2023-030.pdf:1.93MB

航空機落下事故に関するデータが原子力規制庁により更新されたことに伴い、原子力科学研究所における航空機落下確率を再評価するため、経済産業省原子力安全・保安院「実用発電用原子炉施設への航空機落下確率の評価基準について(内規)」に基づき評価を行い、原子力科学研究所の各施設における航空機落下確率を評価した。評価の結果、航空機落下確率の総和は最大となる放射性廃棄物処理場において 5.68$$times$$10$$^{-8}$$回/(炉・年))であり、航空機落下を「想定される外部人為事象」として設計上考慮する必要があるか否かの基準である 10$$^{-7}$$回/(炉・年))を超えないことを確認した。

論文

Processing of JENDL-5 photonuclear sublibrary

今野 力

JAEA-Conf 2023-001, p.143 - 146, 2024/02

MCNP6.2, PHITS3.27で使うことができる光核サブライブラリのACEファイルを作成できるようにNJOY2016.67を修正し、JENDL-5の光核サブライブラリのACEファイルを作成した。作成したライブラリを使って簡単なテスト計算を行い、作成したライブラリに問題がないことを確認した。

論文

The Precipitation and redistribution of alloying element in Zircaloy-4 cladding tube oxidized in high-temperature steam

天谷 政樹

High Temperature Corrosion of Materials, 15 Pages, 2024/00

 被引用回数:0 パーセンタイル:0.02(Metallurgy & Metallurgical Engineering)

Zirconium (Zr)-based alloys are widely used as fuel cladding material for light water reactors. Under a loss-of-coolant accident (LOCA) condition, the oxidation of fuel cladding by high-temperature steam induces the degradation of mechanical properties of the cladding and would affect the integrity of fuel rods and/or assemblies, etc., during LOCA. In this study, the distribution of the elements (zirconium, oxygen, tin, iron and chromium) in Zircaloy-4 cladding specimens oxidized in the temperature range of $$sim$$ 1350- $$sim$$ 1700 K in steam was analyzed along the radial direction of the specimens by using SEM/EPMA, and the cause of element distribution in the specimens was discussed in consideration of the morphology of precipitates in the specimens and hypothesized phase diagrams related to the elements contained in the specimens. The form of the particles precipitated and the comparison between SEM/EPMA results and hypothesized phase diagrams of Zr-Sn-O system suggested that the liquefaction of tin-rich material and/or Zr-(Fe,Cr) compounds occurred during the oxidation test. The results obtained indicate that Zircaloy-4 cladding tubes would start melting at the melting point of tin-oxide and the eutectic point of Zr-(Fe,Cr)compounds, which is much lower than the melting point of Zr, $$alpha$$-Zr(O), or zirconium oxide (ZrO$$_{2}$$).

論文

Simulated performance evaluation of d-Be compact fast neutron source

中山 梓介

Journal of Nuclear Science and Technology, 60(12), p.1447 - 1453, 2023/12

 被引用回数:0 パーセンタイル:0.01(Nuclear Science & Technology)

d+Be中性子源は、橋やトンネルなどのインフラ設備のオンサイト非破壊検査のための可搬型中性子源の候補である。PHITSおよびJENDL-5を用いたモンテカルロ粒子輸送シミュレーションにより、d+Be中性子源の可搬型高速中性子源への適用性を検討した。シミュレーションの結果、遮へい体の厚さを約1.5倍にすることで、現在可搬型中性子源の有力な候補とされているビームエネルギー2.5MeVのp+Li中性子源と同等の性能を持つd+Be中性子源を、より低いビームエネルギーで実現できることを示した。

論文

Microstructural evolution of intermetallic phase precipitates in Cr-coated zirconium alloy cladding in high-temperature steam oxidation up to 1400$$^{circ}$$C

Mohamad, A. B.; 根本 義之; 古本 健一郎*; 岡田 裕史*; 佐藤 大樹*

Corrosion Science, 224, p.111540_1 - 111540_15, 2023/11

 被引用回数:0 パーセンタイル:0(Materials Science, Multidisciplinary)

The steam oxidation test on the Cr-coated Zry cladding was studied up to 1400$$^{circ}$$C to understand the oxidation behavior under the accidental conditions. The double-sided oxidation test study showed that Cr coating can protect Zry cladding at 1200$$^{circ}$$C within 5 min. Cr coating has a protective effect on the Zry cladding up to 1200$$^{circ}$$C in a steam environment. However, in the oxidation test up to 1200$$^{circ}$$C/30 min and 1300$$^{circ}$$C/5 min, Cr coating can no longer protect Zry cladding. Furthermore, at 1300$$^{circ}$$C, the intermetallic phase of the Zr(Cr, Fe)$$_{2}$$ phase that precipitated within the Zry substrate formed as globule microstructures with Fe enrichment. In addition, the transition of the intermetallic phase within the Zry substrate from the solid to the pre-liquid and liquid phases was observed, where it was determined at 1350$$^{circ}$$C/60 min and 1400$$^{circ}$$C/30 min within the ZrO$$_{2}$$ phase (outer side region). The oxidation of the Zr(Cr, Fe)$$_{2}$$ interlayer was also determined in this study, where it resulted in the formation of the oxide phase of Cr, Zr, and Fe. It is worth mentioning that further experiments, such as mechanical testing and modeling, should be considered to support the degradation of the Cr-coated Zry cladding mainly when the liquid phase of the intermetallic phase is obtained for beyond design-basis accident environment.

論文

Evaluation of thermal expansion reactivity feedback effect in water-moderated fuel-particle-dispersion system

福田 航大

Proceedings of 4th Reactor Physics Asia Conference (RPHA2023) (Internet), 4 Pages, 2023/10

水減速燃料粒子分散体系(例:燃料デブリ体系)における熱膨張フィードバックが即発超臨界時の出力ピーク値や放出エネルギーに与える影響を定量的に明らかにすることを目的とした解析を行った。熱膨張を考慮する場合/しない場合の燃料温度反応度係数を仮想的な体系に対して計算し、Nordeheim-Fuchモデルを用いた評価を行った。その結果、熱膨張の影響を無視することで出力ピーク値や放出エネルギーに数十パーセントの誤差が生じうることが明らかとなった。この誤差は臨界事故解析の多くの場面では問題となる大きさではないものの、解析の目的によっては(例えば、事故後の被ばく量やRI放出量の検証のため精度よく結果を得たい場合)熱膨張反応度フィードバックの影響を考慮すべきであることが示された。

論文

Development of new containment tents for rapid worker evacuation from the workspace in emergencies at plutonium fuel handling facilities

柴沼 智博; 平野 宏志*; 木村 泰久; 會田 貴洋; 吉田 将冬; 永井 佑哉; 北村 哲浩

保健物理(インターネット), 58(2), p.91 - 98, 2023/08

原子力機構プルトニウム燃料技術開発センターは、簡易に組み立てられる緊急避難用グリーンハウス(GH)を開発した。本稿では本GHを開発するに至った背景について述べた後、従来の緊急避難用GHの具体的な問題点を整理し、それらをどのように改良・改善し新たなGHを開発したかを説明した。また、本GHを実際に運用することで出現した新たな問題点についても触れ、施した更なる改良・改善内容を紹介した。

論文

A Terrestrial SER Estimation Methodology Based on Simulation Coupled With One-Time Neutron Irradiation Testing

安部 晋一郎; 橋本 昌宜*; Liao, W.*; 加藤 貴志*; 浅井 弘彰*; 新保 健一*; 松山 英也*; 佐藤 達彦; 小林 和淑*; 渡辺 幸信*

IEEE Transactions on Nuclear Science, 70(8, Part 1), p.1652 - 1657, 2023/08

 被引用回数:0 パーセンタイル:0.01(Engineering, Electrical & Electronic)

中性子を起因とする半導体デバイスのシングルイベントアップセット(SEU: Single Event Upset)は、地上にある電子機器の動作の信頼性に関係する問題となる。白色中性子ビームを用いた加速器試験では、現実的な環境の中性子起因ソフトエラー率(SER: Soft Error rate)を測定できるが、世界的にも白色中性子ビームを供給できる施設の数は少ない。ここで、多様な中性子源に適用可能な単一線源照射を地上におけるSER評価に適用できる場合、ビームタイムの欠乏を解消できる。本研究では、これまでに得られた測定結果のうち任意の1つを抽出し、これとPHITSシミュレーションで得たSEU断面積を用いた地上環境におけるSERの評価の可能性を調査した。その結果、提案する推定法で得られたSERは、最悪の場合でも従来のWeibull関数を用いた評価値と2.7倍以内で一致することを明らかにした。また、SER評価におけるシミュレーションコストを低減する簡易化の影響も明らかにした。

論文

Development of correction method for sample density effect on PGA

前田 亮; 瀬川 麻里子; 藤 暢輔; 遠藤 駿典; 中村 詔司; 木村 敦

Journal of Radioanalytical and Nuclear Chemistry, 332(8), p.2995 - 2999, 2023/08

 被引用回数:0 パーセンタイル:0.01(Chemistry, Analytical)

The accuracy of the prompt $$gamma$$-ray analysis is known to degrade for the samples containing neutron-scattering materials, such as hydrogen, depending on its content. Recently, we discovered that the density of the scattering materials also affects the accuracy. In this paper, we developed a correction method for the effect of the sample densities. The developed correction method is straightforward and applicable to samples with unknown densities. The simulation and experiments verified the performance of the correction method. The results confirmed that the correction method could reduce the uncertainty due to sample density from 47% to approximately 1%.

論文

OECD/NEA ARC-F Project; Summary of fission product transport

Lind, T.*; Kalilainen, J.*; Marchetto, C.*; Beck, S.*; 中村 康一*; 木野 千晶*; 丸山 結; 城戸 健太朗; Kim, S. I.*; Lee, Y.*; et al.

Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.4796 - 4809, 2023/08

The OECD/NEA ARC-F project was established to investigate the accidents at Fukushima Daiichi nuclear power station with the aim of consolidating the observations for deeper understanding of the severe accident progression and the status of reactors and containment vessels. Additionally, the project formed an information sharing framework in reactor safety between Japan and international experts. In order to achieve these objectives, the project focused on three tasks: i) to refine analysis for accident scenarios and associated fission-product transport and dispersion, ii) to compile and manage data on the Fukushima Daiichi NPS accident, and iii) to discuss future long-term projects relevant to the Fukushima Daiichi NPS accident. The work was carried out by 22 partners from 12 countries. In the fission product group, ten organizations worked on five topics which were ranked with a high significance as open issues based on the BSAF project and were thereby selected for further investigations. The five fission product related topics were: i) fission product speciation, ii) iodine chemistry, iii) pool scrubbing, iv) fission product transport and behavior in the buildings, and v) uncertainty analysis and variant calculations. In this paper, the work carried out to investigate these five fission product release and transport topics of special interest in the ARC-F project will be described and summarized.

論文

Oxygen potential of neodymium-doped U$$_{0.817}$$Pu$$_{0.180}$$Am$$_{0.003}$$O$$_{2 pm x}$$ uranium-plutonium-americium mixed oxides at 1573, 1773, and 1873 K

Vauchy, R.; 砂押 剛雄*; 廣岡 瞬; 中道 晋哉; 村上 龍敏; 加藤 正人

Journal of Nuclear Materials, 580, p.154416_1 - 154416_11, 2023/07

 被引用回数:4 パーセンタイル:96.18(Materials Science, Multidisciplinary)

Oxygen potentials of U$$_{0.817}$$Pu$$_{0.180}$$Am$$_{0.003}$$O$$_{2 pm x}$$ incorporating 10 and 20 mol% of neodymium (Nd/Metal) were investigated by thermogravimetry at 1573, 1773, and 1873 K. The presence of neodymium induced an increase in the oxygen potential of the U-Pu mixed oxide. The correlation between oxygen partial pressure pO$$_{2}$$ and deviation from stoichiometry x was analyzed, and a model of defect chemistry was proposed. Finally, the crystal structure of these mixed oxides was discussed at the light of the mechanisms of possible Nd(III)/U(V) charge compensation, and deviation from stoichiometry.

論文

重粒子線治療の全身被ばく線量評価システムRT-PHITS for CIRTの開発

古田 琢哉

Isotope News, (787), p.20 - 23, 2023/06

炭素線治療は従来の放射線治療よりも腫瘍部への線量が集中する優位性を持つが、正常組織での二次的ながんの発生原因となり得る照射を完全に無くすことは困難である。現状の線量評価では治療効果と周辺重要臓器の急性障害の回避を目的に治療部位近傍に限定した評価が行われており、2次発がんなどの副作用に影響する低線量の領域まで評価が行われていない。そこで、重粒子線治療の計画データを基に、重粒子ビーム照射体系を再構築し、PHITSによって、2次粒子の挙動も含めて重粒子線治療を正確に再現するシステムRT-PHITS for CIRTを開発した。このシステムを用いることで、過去に実施された重粒子線治療の患者全身における線量評価が可能で、評価結果を治療後の2次がん発生等の疫学データと組み合わせることで、放射線治療後の副作用と被ばく線量の相関関係を明らかにすることができる。

論文

環境放射線と半導体デバイスのソフトエラー; 環境放射線起因ソフトエラーのシミュレーション

安部 晋一郎

日本原子力学会誌ATOMO$$Sigma$$, 65(5), p.326 - 330, 2023/05

電子機器の信頼性問題として、地上に降り注ぐ二次宇宙線の中性子やミューオンによって生じる電子機器の一時的な誤動作(ソフトエラー)がある。高い信頼性が求められる電子機器の数は社会の進歩とともに増えており、これらすべての機器のソフトエラー発生率(SER: Soft Error Rate)を実測的な方法で評価することは難しい。また機器の製造前の段階でSERを評価することも求められており、シミュレーションによるSER評価の重要性が高まっている。原子力学会誌の解説記事において、放射線挙動解析コードPHITSを用いたソフトエラーシミュレーション技術の研究開発や、ソフトエラー発生の物理過程の詳細解析結果について紹介する。

論文

Research on improvement of HTGR core power-density, 4; Feasibility study for a reactor core

沖田 将一朗; 水田 直紀; 高松 邦吉; 後藤 実; 吉田 克己*; 西村 洋亮*; 岡本 孝司*

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 10 Pages, 2023/05

Adoption of SiC-matrix fuel elements in future pin-in-block type HTGR designs will enhance oxidation resistance of the fuel element in the event of the air ingress accident, one of the most worrisome accidents in HTGRs. This would eliminate the need for the graphite sleeves used in the current pin-in-block type HTGR designs and enable high power density core designs with sleeveless and direct coolable fuel structure. Such a concept itself has been suggested by Japan Atomic Energy Agency (JAEA) in the past. However, JAEA has not yet demonstrated the feasibility for a core design with the SiC-matrix fuel elements. The present work is intended to demonstrate the feasibility for a new core design upgraded from an existing conceptual core design, called HTR50S, with 50 MW thermal power and reactor outlet temperature of 750$$^{circ}$$C. The new core design uses SiC-matrix fuel elements and increases the reactor power density to 1.2 times higher than the original HTR50S design. The feasibility is determined by whether the core satisfies the target values in nuclear and thermal-hydraulic designs by performing burn-up calculation with the whole core model and fuel temperature calculations. The calculation results showed that the new core design satisfied these target values on the reactor shutdown margin, the temperature coefficient of reactivity, and the maximum fuel temperature during normal operation.

論文

Development of dynamic PRA methodology for external hazards in sodium-cooled fast reactor via applying Markov chain Monte Carlo method to severe accident analysis code; Assessment of accident management of assigning independent emergency diesel generators to each air cooler

Li, C.-Y.; 渡部 晃*; 内堀 昭寛; 岡野 靖

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 10 Pages, 2023/05

Quantitative assessment of the effect of accident management on the various external hazards is essential in the nuclear safety analysis. This study aims to establish the dynamic probabilistic risk assessment methodology for sodium-cooled fast reactors that can consider the transient plant status under continuous external hazards with corresponding countermeasures operating stochastically. Specifically, the Continuous Markov chain Monte Carlo (CMMC) and Deterministic and Stochastic Petri Nets (DSPN) methods are newly applied to the severe accident analysis code, SPECTRA, which can conduct dynamic plant evaluation in the different severe accident conditions of nuclear reactors, to develop an evaluation methodology for typical external hazards. In the DSPN-CMMC-SPECTRA coupled frame, the latest safety functions of the plant components/systems can be stochastically determined by the DSPN-CMMC grounded on the current plant states under continuous hazard and the interaction between the multi-state components/systems; then, SPECTRA can evaluate the following plant state determined by the latest safety function of the components/systems. Therefore, the advantage of this newly developed DSPN-CMMC-SPECTRA frame is having the capability to quantitatively and stochastically evaluate the transient accident progressions that potentially lead to the core damage under the continuous external hazard scenario. As for the preliminary exam on the DSPN-CMMC-SPECTRA frame, one of the typical external hazards of continuous volcanic ashfall is selected in this research. In addition, the numerical investigation of alternative accident management' effects has also been carried out and quantitatively confirmed in this research.

論文

Applicability of differential die-away self-interrogation technique for quantification of spontaneous fission nuclides for fuel debris at Fukushima Daiichi Nuclear Power Plants

長谷 竹晃; 相樂 洋*; 小菅 義広*; 能見 貴佳; 奥村 啓介

Journal of Nuclear Science and Technology, 60(4), p.460 - 472, 2023/04

 被引用回数:1 パーセンタイル:27.23(Nuclear Science & Technology)

This paper provides an overview of the applicability of the Differential Die-Away Self-Interrogation (DDSI) technique for quantification of spontaneous fissile nuclides in fuel debris at the Fukushima Daiichi Nuclear Power Plants. In this research, massive fuel debris stored in a canister was evaluated, and the void space of the canister was assumed to be filled with water for wet storage and air for dry storage. The composition of fuel debris was estimated based on elements such as the inventory in the reactor core and operation history. The simulation results show that for wet storage, the DDSI technique can properly evaluate the neutron leakage multiplication and quantify spontaneous fissile nuclides with a total measurement uncertainty (TMU) of approximately 8%. For dry storage, the known-alpha technique, which was previously established, can be applied to quantify spontaneous fissile nuclides with a TMU of approximately 4%. In both cases, the largest uncertainty factor is the variation in water content in the canister. In the case of wet storage, the uncertainty could be significantly increased in cases where the fuel debris is extremely unevenly distributed in the canister.

論文

Measurement of 107-MeV proton-induced double-differential thick target neutron yields for Fe, Pb, and Bi using a fixed-field alternating gradient accelerator at Kyoto University

岩元 大樹; 中野 敬太; 明午 伸一郎; 佐藤 大樹; 岩元 洋介; 杉原 健太; 西尾 勝久; 石 禎浩*; 上杉 智教*; 栗山 靖敏*; et al.

Journal of Nuclear Science and Technology, 60(4), p.435 - 449, 2023/04

 被引用回数:3 パーセンタイル:63.91(Nuclear Science & Technology)

加速器駆動核変換システム(ADS)の研究開発及び京都大学臨界実験装置(KUCA)におけるADS未臨界炉物理の基礎研究を目的として、固定磁場強収束(FFAG)加速器を用いて107MeV陽子による鉄、鉛及びビスマス標的に対する二重微分中性子収量(TTNY)を測定した。TTNYは8個の中性子検出器(各検出器は小型のNE213液体有機シンチレータと光電子増倍管より構成される)からなる中性子検出器システムを用いて飛行時間法により得られたものである。測定で得られたTTNYを、粒子・重イオン輸送コードシステム(PHITS)に組み込まれたモンテカルロ法に基づく核破砕反応モデル(INCL4.6/GEM, Bertini/GEM, JQMD/GEM, JQMD/SMM/GEM)及び評価済み高エネルギー核データライブラリ(JENDL-4.0/HE)による計算結果と比較した。JENDL-4.0/HEを含む比較対象のモデルは、検出器角度5度における高エネルギーピークを再現しないなどの特徴的な不一致が見られた。測定で得られたTTNYとPHITSによって評価した20MeV以下のエネルギー及び角度積分中性子収率を比較した結果、INCL4.6/GEMがKUCAにおけるADS炉物理実験のモンテカルロ輸送シミュレーションに適していることが示された。

論文

Large-eddy simulation on two-liquid mixing in the horizontal leg and downcomer (the TAMU-CFD Benchmark), with respect to fluctuation behavior of liquid concentration

安部 諭; 岡垣 百合亜

Nuclear Engineering and Design, 404, p.112165_1 - 112165_14, 2023/04

 被引用回数:0 パーセンタイル:0.01(Nuclear Science & Technology)

Pressurized Thermal Shock (PTS) is induced potentially by the rapid cooling of the cold-leg and downcomer wall in the primary system of a Pressurized Water Reactor (PWR) due to the initiation of Emergency Core Cooling System (ECCS). Thus, fluids mixing in a horizontal cold-leg and downcomer should be predicted accurately; however, turbulence production and damping often hinders this prediction due to the presence of the density gradients. Hence, the Fifth International Benchmark Exercise, the cold-leg mixing Computational Fluid Dynamics (CFD) Benchmark, was conducted under the support of OECD/NEA. The experiment was designed for visualization of the mixing phenomena of two liquids with different densities. The heavy liquid was a simulant of cold water from ECCS, in a horizontal leg and downcomer. We used the Large-eddy Simulation (LES) to investigate the time fluctuation behaviors of velocity and liquid concentration. The CFD simulation was performed with two turbulence models and three different numerical meshes. We investigated the characteristics of the appearance frequency of the heavy liquid concentration with the statistical method. Based on our findings, we propose further experiments and numerical investigations to understand the fluid mixing phenomena related to PTS.

1258 件中 1件目~20件目を表示