Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Shimomura, Yusuke; Sato, Takuya; Fukui, Yasutaka; Kudo, Kenji; Yoshioka, Tatsuji
JAEA-Review 2018-023, 220 Pages, 2019/01
JAEA-Review-2018-023.pdf:15.6MB
On September 11, 2015, leaky traces of bituminized wastes were confirmed from four drums filled with bituminization in waste packages storage yard (II) of waste management facility in Oarai Research and Development Center. Moreover, even after the subsequent investigation, a leakage trace was found from one bituminous drum on November 10, 2015. Furthermore, on December 2, 2015, there was no a leakage trace in one bituminous drum, however the upper lid was found to be intensely corroded. To investigate the causes and the countermeasures for leakages of bituminized wastes from the drums, we have set up a Work Group to investigate the causes and the countermeasures to leakage traces from the drums. This report is based on "Report on Cause Investigation and Countermeasure of Leakage Trace from the Drum" summarized by this working group, the report was reconstructed including the contents clarified in the subsequent document investigation.
Strasser, P.*; Abe, Mitsushi*; Aoki, Masaharu*; Choi, S.*; Fukao, Yoshinori*; Higashi, Yoshitaka*; Higuchi, Takashi*; Iinuma, Hiromi*; Ikedo, Yutaka*; Ishida, Katsuhiko*; et al.
EPJ Web of Conferences, 198, p.00003_1 - 00003_8, 2019/01
Times Cited Count：13 Percentile：99.06(Quantum Science & Technology)Strasser, P.*; Aoki, Masaharu*; Fukao, Yoshinori*; Higashi, Yoshitaka*; Higuchi, Takashi*; Iinuma, Hiromi*; Ikedo, Yutaka*; Ishida, Katsuhiko*; Ito, Takashi; Iwasaki, Masahiko*; et al.
Hyperfine Interactions, 237(1), p.124_1 - 124_9, 2016/12
Times Cited Count：7 Percentile：90.97(Physics, Atomic, Molecular & Chemical)Abe, Hiroshi; Shimomura, Takuya; Tokuhira, Shinnosuke*; Shimada, Yukihiro*; Takenaka, Yusuke*; Furuyama, Yuta*; Nishimura, Akihiko; Uchida, Hirohisa*; Daido, Hiroyuki; Oshima, Takeshi
Proceedings of 7th International Congress on Laser Advanced Materials Processing (LAMP 2015) (Internet), 4 Pages, 2015/08
A short pulse laser (the nanosecond and femtosecond) was applied to hydrogen absorbing alloys surface layer, and a surface modification experiment was put into effective to aim at improvement of hydrogen adsorption functionally. It was investigated about correlation between an initial hydrogen absorption reaction rate of hydrogen alloys and a laser irradiation in this research. The laser irradiation condition was done with pulse width 100 fsec and energy 0.2 - 3.4 mJ/pulse. It blazed down on hydrogen absorbing alloys (LaNi
Al
) and changed local order in the surface. As a result, the initial hydrogen absorption reaction rate was 1.5 - 3.0 times as fast as a irradiated sample, and the result and laser irradiated sample found out that a hydrogen absorption function improves. A laser irradiation can conclude to be effective in surface modification of the hydrogen storage materials.
Nishimura, Akihiko; Takenaka, Yusuke*; Furuyama, Takehiro*; Shimomura, Takuya; Terada, Takaya; Daido, Hiroyuki
Journal of Laser Micro/Nanoengineering, 9(3), p.221 - 224, 2014/11
Times Cited Count：0 Percentile：0(Nanoscience & Nanotechnology)Heat resistant FBG sensors were developed by femtosecond laser processing to apply them to high temperature operated piping system of nuclear power plants. The FBG sensor was installed on the surface of a steel blade and a vibration test was conducted to detect the resonant vibration frequency of the vibrating blade. The FBG sensor had the heatproof performance at 600
C. A frequency stabilized sensing system using a tunable laser was tested for structural health monitoring in daily operation of nuclear power plants. The FBG sensor was installed on the surface of a steel blade for vibration induced strain measurements. Welding, brazing, soldering and noble metal powder adhesive were discussed for molding the FBG sensors.
Nishimura, Akihiko; Terada, Takaya; Takenaka, Yusuke*; Furuyama, Takehiro*; Shimomura, Takuya
Proceedings of 22nd International Conference on Nuclear Engineering (ICONE-22) (DVD-ROM), 6 Pages, 2014/07
Since 2007, JAEA has been developing laser based technologies of structural health monitoring. The FBG sensor made by femtosecond laser processing will be the best candidate. To make the best use of the heat resistant characteristic, the FBG sensor was embedded in metal mold by laser cladding. A groove was processed to the surface of a SUS metal plate. We used a QCW laser to weld a filler wire on the plate. A series of weld beads perfectly formed a sealing clad on the groove. Though the FBG sensor was buried tightly, no degradation on the reflection spectrum was detected after the processing. The FBG sensor could detect the vibration of the plate caused by impact shocks and audio vibration. The reflection peak of the FBG sensor under laser cladding condition was shifted to be 6 nm. We demonstrated that the corresponded temperature derive from the reflection peak shift reached 600 degrees in heat shock experiments. The installation procedure of a FBG sensor using a portable laser cladding machine was described.
Nishimura, Akihiko; Takenaka, Yusuke*; Furuyama, Takehiro*; Shimomura, Takuya; Terada, Takaya; Daido, Hiroyuki
Proceedings of 1st Smart Laser Processing Conference 2014 (SLPC 2014), 4 Pages, 2014/04
Heat resistant FBG sensors were developed by femtosecond laser processing. In order to apply them to piping system of nuclear power plants, vibration test under high temperature was demonstrated. The FBG sensor had the heatproof performance at 600C. A frequency stabilized sensing system using a tunable laser was tested for structural health monitoring in daily operation of nuclear power plants. The FBG sensor was installed on the surface of a steel blade for vibration induced strain measurements. Welding, brazing, soldering and noble metal powder adhesive were discussed for molding the FBG sensors.
Kiriyama, Hiromitsu; Mori, Michiaki; Okada, Hajime; Shimomura, Takuya; Nakai, Yoshiki*; Tanoue, Manabu; Kondo, Shuji; Kanazawa, Shuhei; Yogo, Akifumi; Sagisaka, Akito; et al.
JPS Conference Proceedings (Internet), 1, p.015095_1 - 015095_5, 2014/03
We present the design and characterization of a high-contrast, petawatt-class Ti:sapphire chirped-pulse amplification (CPA) laser system. Two saturable absorbers and low-gain optical parametric chirped-pulse amplification (OPCPA) preamplifier in the double CPA laser chain have improved the temporal contrast to 1.4
10
on the subnanosecond time scale at 70 terawatt level. Final uncompressed broadband pulse energy is 28 J, indicating the potential for reaching peak power near 600 terawatt. We also discuss our upgrade to over petawatt level at a 0.1 Hz repetition rate briefly.
Sakaki, Hironao; Nishiuchi, Mamiko; Maeda, Shota; Sagisaka, Akito; Pirozhkov, A. S.; Pikuz, T.; Faenov, A.*; Ogura, Koichi; Fukami, Tomoyo; Matsukawa, Kenya*; et al.
Review of Scientific Instruments, 85(2), p.02A705_1 - 02A705_4, 2014/02
Times Cited Count：2 Percentile：11.24(Instruments & Instrumentation)High intensity laser-plasma interaction has attracted considerable interest for a number of years. The laser-plasma interaction is accompanied by generation of various charged particle beams. Results of simultaneous novel measurements of electron-induced photonuclear neutrons (photoneutron), which are a diagnostic of the laser-plasma interaction, are proposed to use for optimization of the laser-plasma ion generation. The proposed method is demonstrated by the laser irradiation with the intensity os 110
W/cm
on the metal foil target. The photoneutrons are measured by using NE213 liquid scintillation detectors. Heavy-ion signal is registered with the CR39 track detector simultaneously. The measured signals of the electron-induced photoneutrons are well reproduced by using the Particle and Heavy Ion Transport code System (PHITS). The results obtained provide useful approach for analyzing the various laser based ion beams.
Sagisaka, Akito; Pirozhkov, A. S.; Nishiuchi, Mamiko; Ogura, Koichi; Sakaki, Hironao; Yogo, Akifumi; Mori, Michiaki; Kiriyama, Hiromitsu; Okada, Hajime; Kanazawa, Shuhei; et al.
Reza Kenkyu, 42(2), p.160 - 162, 2014/02
High-intensity laser and thin-foil interactions produce high-energy particles, hard X-ray, high-order harmonics, and terahertz radiation. A proton beam driven by a high-intensity laser has received attention as a compact ion source for medical and other applications. We have measured the proton yield from thin-foil targets irradiated with a high-intensity Ti:sapphire laser (J-KAREN) at JAEA. The longitudinal extent of the preformed plasma protruding from the front surface of the target is reduced by decreasing the duration of the amplified spontaneous emission (ASE) before the main pulse. The maximum proton energy in the target normal direction increases when the size of the preformed plasma is controlled.
Yogo, Akifumi; Kondo, Kiminori; Mori, Michiaki; Kiriyama, Hiromitsu; Ogura, Koichi; Shimomura, Takuya; Inoue, Norihiro*; Fukuda, Yuji; Sakaki, Hironao; Jinno, Satoshi; et al.
Optics Express (Internet), 22(2), p.2060 - 2069, 2014/01
Times Cited Count：10 Percentile：49.33(Optics)Fukuda, Yuji; Sakaki, Hironao; Kanasaki, Masato; Yogo, Akifumi; Jinno, Satoshi; Tampo, Motonobu*; Faenov, A. Ya.*; Pikuz, T. A.*; Hayashi, Yukio; Kando, Masaki; et al.
Proceedings of SPIE, Vol.8779 (Internet), p.87790F_1 - 87790F_7, 2013/05
Times Cited Count：0 Percentile：0.05(Engineering, Biomedical)We demonstrate a new ion diagnosis method for high energy ions by utilizing a combination of a single CR-39 detector and plastic plates, which enables to detect high energy ions beyond the detection threshold limit of the CR-39. This detection method coupled with a magnetic spectrometer is applied to identify high energy ions of 50 MeV per nucleon in laser-driven ion acceleration experiments using cluster-gas targets.
Kiriyama, Hiromitsu; Shimomura, Takuya; Mori, Michiaki; Nakai, Yoshiki*; Tanoue, Manabu; Kondo, Shuji; Kanazawa, Shuhei; Pirozhkov, A. S.; Esirkepov, T. Z.; Hayashi, Yukio; et al.
Applied Sciences (Internet), 3(1), p.214 - 250, 2013/03
Times Cited Count：15 Percentile：50(Chemistry, Multidisciplinary)This paper reviews techniques for improving the temporal contrast and spatial beam quality in an ultra-intense laser system that is based on chirped-pulse amplification (CPA). We describe the design, performance, and characterization of our laser system, which has the potential for achieving a peak power of 600 TW. We also describe applications of the laser system in the relativistically dominant regime of laser-matter interactions and discuss a compact, high efficiency diode-pumped laser system.
Fukuda, Yuji; Sakaki, Hironao; Kanasaki, Masato; Yogo, Akifumi; Jinno, Satoshi; Tampo, Motonobu; Faenov, A. Ya.*; Pikuz, T.; Hayashi, Yukio; Kando, Masaki; et al.
Radiation Measurements, 50, p.92 - 96, 2013/03
Times Cited Count：12 Percentile：67.14(Nuclear Science & Technology)A new diagnosis method for high energy ions utilizing a single CR-39 detector mounted on plastic plates is demonstrated to identify the presence of the high energy component beyond the CR-39's detection threshold limit. On irradiation with a 25 MeV per nucleon He ion beam from conventional rf-accelerators, a large number of etch pits having elliptical opening shapes are observed on the rear surface. Detailed investigations reveal that these etch pits are created by heavy ions inelastically backscattered from the plastic plates. This ion detection method is applied to laser-driven ion acceleration experiments using cluster-gas targets, and acceleration of ions with energies up to 50 MeV per nucleon are identified.
Faenov, A. Ya.*; Skobelev, I. Yu.*; Pikuz, T.; Pikuz, S. A.*; Fortov, V. E.*; Fukuda, Yuji; Hayashi, Yukio; Pirozhkov, A. S.; Kotaki, Hideyuki; Shimomura, Takuya; et al.
Laser and Particle Beams, 30(3), p.481 - 488, 2012/09
Times Cited Count：11 Percentile：43.57(Physics, Applied)Kiriyama, Hiromitsu; Shimomura, Takuya; Sasao, Hajime; Nakai, Yoshiki*; Tanoue, Manabu; Kondo, Shuji; Kanazawa, Shuhei; Pirozhkov, A. S.; Mori, Michiaki; Fukuda, Yuji; et al.
Optics Letters, 37(16), p.3363 - 3365, 2012/08
Times Cited Count：39 Percentile：85.86(Optics)We demonstrate the temporal contrast enhancement in a petawatt-class Ti:sapphire chirped-pulse amplification (CPA) laser system. An extra saturable absorber, introduced downstream a low gain optical parametric chirped-pulse amplification (OPCPA) preamplifier, has improved the temporal contrast in the system to 1.410 on the sub-nanosecond time scale at 70 TW power level. We have achieved 28 J of uncompressed broadband output energy with this system, indicating the potential for reaching peak powers near 600 TW.
Pikuz, T.; Faenov, A.*; Skobelev, I.*; Fortov, V. E.*; Boldarev, A.*; Gasilov, V.*; Chen, L. M.*; Zhang, L.*; Yan, W.*; Yuan, D.*; et al.
AIP Conference Proceedings 1465, p.181 - 201, 2012/07
Times Cited Count：0 Percentile：0.13(Physics, Applied)Ogura, Koichi; Nishiuchi, Mamiko; Pirozhkov, A. S.; Tanimoto, Tsuyoshi*; Sagisaka, Akito*; Esirkepov, T. Z.; Kando, Masaki; Shizuma, Toshiyuki; Hayakawa, Takehito; Kiriyama, Hiromitsu; et al.
Optics Letters, 37(14), p.2868 - 2870, 2012/07
Times Cited Count：83 Percentile：95.88(Optics)Using high contrast (10
:1) and high intensity (10 W/cm) laser pulse with the duration of 40 fs from OPCPA/Ti:Sapphire laser, a 40 MeV proton bunch is obtained, which is a record for laser pulse with energy less than 10 J. The efficiency for generation of protons with kinetic energy above 15 MeV is 0.1%.
Ogura, Koichi; Shizuma, Toshiyuki; Hayakawa, Takehito; Yogo, Akifumi; Nishiuchi, Mamiko; Orimo, Satoshi; Sagisaka, Akito; Pirozhkov, A. S.; Mori, Michiaki; Kiriyama, Hiromitsu; et al.
Japanese Journal of Applied Physics, 51(4), p.048003_1 - 048003_2, 2012/04
Times Cited Count：2 Percentile：8.93(Physics, Applied)A proton beam driven by a repetitive high-intensity-laser is utilized to induce a 
Li(p,n)Be nuclear reaction. The total activity of Be are evaluated by two different methods. The activity obtained measuring the decay 
-rays after 1912 shots at 1 Hz is 1.7
0.2 Bq. This is in good agreement with 1.60.3 Bq evaluated from the proton energy distribution measured using a time-of-flight detector and the nuclear reaction cross-sections. We conclude that the production of activity can be monitored in real time using the time-of-flight-detector placed inside a diverging proton beam coupled with a high-speed signal processing system.
Kiriyama, Hiromitsu; Mori, Michiaki; Shimomura, Takuya; Miyanaga, Noriaki*
Osaka Daigaku Reza Enerugigaku Kenkyu Senta Heisei-23-Nendo Kyodo Riyo, Kyodo Kenkyu Seika Hokokusho, p.113 - 114, 2012/03
We have developed a femtosecond high intensity laser system, which combines both Ti:sapphire chirped-pulse amplification (CPA) and optical parametric chirped-pulse amplification (OPCPA) techniques, that produces more than 28 J broadband output energy, indicating the potential for achieving peak powers of 600 TW. With a cleaned high-energy seeded OPCPA preamplifier with a saturable absorber as a front-end in the system, for the final compressed pulse we found that the temporal contrast in this system exceeds 10 on the sub-nanosecond timescale before the main femtosecond pulse.
