Uranium-plutonium-americium cation interdiffusion in polycrystalline (U,Pu,Am)O mixed oxides

Vauchy, R.; Matsumoto, Taku; Hirooka, Shun; Uno, Hiroki*; Tamura, Tetsuya*; Arima, Tatsumi*; Inagaki, Yaohiro*; Idemitsu, Kazuya*; Nakamura, Hiroki; Machida, Masahiko; et al.

Journal of Nuclear Materials, 588, p.154786_1 - 154786_13, 2024/01

https://doi.org/10.1016/j.jnucmat.2023.154786

A Terrestrial SER Estimation Methodology Based on Simulation Coupled With One-Time Neutron Irradiation Testing

Abe, Shinichiro; Hashimoto, Masanori*; Liao, W.*; Kato, Takashi*; Asai, Hiroaki*; Shimbo, Kenichi*; Matsuyama, Hideya*; Sato, Tatsuhiko; Kobayashi, Kazutoshi*; Watanabe, Yukinobu*

IEEE Transactions on Nuclear Science, 70(8, Part 1), p.1652 - 1657, 2023/08

https://doi.org/10.1109/TNS.2023.3280190

Single event upsets (SEUs) caused by neutrons is a reliability problem for microelectronic devices in the terrestrial environment. Acceleration tests using white neutron beam provide realistic soft error rates (SERs), but only a few facilities can provide white neutron beam in the world. If single-source irradiation applicable to diverse neutron source can be utilized for the evaluation of the SER in the terrestrial environment, it contributes to solve the shortage of beam time. In this study, we investigated the feasibility of the SER estimation in the terrestrial environment by any one of these measured data with the SEU cross sections obtained by PHITS simulation. It was found that the SERs estimated by our proposed method are within a factor of 2.7 of that estimated by the Weibull function. We also investigated the effect of simplification which reduce the computational cost in simulation to the SER estimation.

Validation practices of multi-physics core performance analysis in an advanced reactor design study

Doda, Norihiro; Kato, Shinya; Hamase, Erina; Kuwagaki, Kazuki; Kikuchi, Norihiro; Ohgama, Kazuya; Yoshimura, Kazuo; Yoshikawa, Ryuji; Yokoyama, Kenji; Uwaba, Tomoyuki; et al.

Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.946 - 959, 2023/08

https://dx.doi.org/10.13182/NURETH20-40118

An innovative design system named ARKADIA is being developed to realize the design of advanced nuclear reactors as safe, economical, and sustainable carbon-free energy sources. This paper focuses on ARKADIA-Design for design studies as a part of ARKADIA and introduces representative verification methods for numerical analysis methods of the core design. ARKADIA-Design performs core performance analysis of sodium-cooled fast reactors using a multiphysics approach that combines neutronics, thermal-hydraulics, core mechanics, and fuel pin behavior analysis codes. To confirm the validity of these analysis codes, validation matrices are identified with reference to experimental data and reliable numerical analysis results. The analysis models in these codes and the representative practices for the validation matrices are described.

Regulatory implementation of the occupational equivalent dose limit for the lens of the eye and underlying relevant efforts in Japan

Yokoyama, Sumi*; Hamada, Nobuyuki*; Tsujimura, Norio; Kunugita, Naoki*; Nishida, Kazutaka*; Ezaki, Iwao*; Kato, Masahiro*; Okubo, Hideki*

International Journal of Radiation Biology, 99(4), p.604 - 619, 2023/04

https://doi.org/10.1080/09553002.2022.2115160

In April 2011, the International Commission on Radiological Protection recommended reducing the occupational equivalent dose limit for the lens. Such a new occupational lens dose limit has thus far been implemented in many countries, and there are extensive discussions toward its regulatory implementation in other countries. In Japan, discussions in the Japan Health Physics Society (JHPS) began in April 2013 and in Radiation Council in July 2017, and the new occupational lens dose limit was implemented into regulation in April 2021. To share our experience, we have published a series of papers summarizing situations in Japan: the first paper based on information available by early 2017, and the second paper by early 2019. This paper (our third paper of this series) aims to review updated information available by mid-2022, such as regarding regulatory implementation of the new occupational lens dose limit, recent discussions by relevant ministries based on the opinion from the council, establishment process of safety and health management systems, the JHPS guidelines on lens dose monitoring and radiation safety, voluntary countermeasures of the licensees, development of lens dose calibration method, and recent studies on exposure of the lens in nuclear workers and biological effect on the lens.

Doppler-free ablation fluorescence spectroscopy of Ca for high-resolution remote isotopic analysis

Miyabe, Masabumi; Kato, Masaaki*; Hasegawa, Shuichi*

Journal of Analytical Atomic Spectrometry, 38(2), p.347 - 358, 2023/02

https://doi.org/10.1039/D2JA00304J

To develop remote isotopic analysis for the nuclids with small isotope shifts, Doppler-free fluorescence spectroscopy of Ca was performed using laser ablation plume. Counter-propagating laser beams from two external cavity diode lasers were used to irradiate the plume in order to excite the ground-state Ca atoms to the D state through a double resonance scheme of S P D. Subsequently, we measured fluorescence spectra associated with the relaxation from the D to P states. The linewidth measured at 1 ms delay after ablation under helium gas pressure of 70 Pa was found to be less than 70 MHz, which was about 1/30 of the linewidth of the Doppler-limited fluorescence spectrum. A broad Gaussian pedestal was observed at less than 600 micro-second delay in the temporal variation in fluorescence spectra, and it was most likely due to the velocity-changing collision. Additionally, the pressure broadening rate coefficient for the second-step P D transition was determined to be 46.0 MHz/torr from the spectra measured under various gas pressures. We evaluated analytical performances such as linearity of the calibration curve, limit of detection, and measurement accuracy using fluorescence signals of three naturally occurring Ca isotopes (i.e., Ca, Ca, and Ca). The limit of detection of isotopic abundance was estimated to be 0.09% from the 3-sigma criteria of the background. These results suggest that this spectroscopic technique is promising for remote isotopic analysis of nuclides with small isotope shifts.

Composite with a glassy nonporous coordination polymer enhances gas adsorption selectivity

Zheng, X.*; Kato, Masaru*; Uemura, Yohei*; Matsumura, Daiju; Yagi, Ichizo*; Takahashi, Kiyonori*; Noro, Shinichiro*; Nakamura, Takayoshi*

Inorganic Chemistry, 62(3), p.1257 - 1263, 2023/01

https://doi.org/10.1021/acs.inorgchem.2c04068

Local environmental effects on cosmic ray observations at Syowa Station in the Antarctic; PARMA-based snow cover correction for neutrons and machine learning approach for neutrons and muons

Kataoka, Ryuho*; Sato, Tatsuhiko; Kato, Chihiro*; Kadokura, Akira*; Kozai, Masayoshi*; Miyake, Shoko*; Murase, Kiyoka*; Yoshida, Rihito*; Tomikawa, Yoshihiro*; Munakata, Kazuoki*

Journal of Space Weather and Space Climate (Internet), 12, p.37_1 - 37_11, 2022/11

https://doi.org/10.1051/swsc/2022033

Solar modulation of galactic cosmic rays around the solar minimum in 2019-2020 looks different in the secondary neutrons and muons observed at the ground. To compare the solar modulation of primary cosmic rays in detail, we have to remove the possible seasonal variations caused by the atmosphere and surrounding environment. As such surrounding environment effects, we evaluate the snow cover effect on neutron count rate and the atmospheric temperature effect on muon count rate both simultaneously observed at Syowa Station in the Antarctic (69.01 S, 39.59 E). The corrected muon count rate starts decreasing in late 2019, earlier than the corrected neutron count rate which starts decreasing in early 2020, possibly indicating the rigidity dependent solar modulation in the heliosphere.

Design and actual performance of J-PARC 3 GeV rapid cycling synchrotron for high-intensity operation

Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.

Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09

https://doi.org/10.1080/00223131.2022.2038301

In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.

Analysis on cooling behavior for simulated molten core material impinging to a horizontal plate in a sodium pool

Matsushita, Hatsuki*; Kobayashi, Ren*; Sakai, Takaaki*; Kato, Shinya; Matsuba, Kenichi; Kamiyama, Kenji

Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 9 Pages, 2022/09

During core disruptive accidents in sodium-cooled fast reactors, the molten core material flows through flow channels, such as the control rod guide tubes, into the core inlet plenum under the core region. The molten core material can be cooled and solidified while impinging on a horizontal plate of the inlet plenum in a sodium coolant. However, the solidification and cooling behaviors of molten core materials impinged on a horizontal structure have not been sufficiently studied thus far. Notably, this is an important phenomenon that needs to be elucidated from the perspective of improving the safety of sodium-cooled fast reactors. Accordingly, a series of experiments on discharging a simulated molten core material (alumina: AlO) into a sodium coolant on a horizontal structure was conducted at the experimental facility of the National Nuclear Center of the Republic of Kazakhstan. In this study, analyses on the sodium experiments using SIMMER-III as the fast reactor safety evaluation code were performed. The analysis methods were validated by comparing the results and experiment data. In addition, the cooling and solidification behaviors during jet impingement were evaluated. The results indicated that the molten core material exhibited fragmentation owing to the impingement on the horizontal plate and was, therefore, scattered toward the periphery. Furthermore, the simulated molten core material was evaluated to be cooled by sodium and subsequently solidified.

Plant system study of France-Japan common concept on Sodium-cooled Fast Reactor

Kato, Atsushi; Yamamoto, Tomohiko; Ando, Masato; Chikazawa, Yoshitaka; Murakami, Hisatomo*; Oyama, Kazuhiro*; Kaneko, Fumiaki*; Higurashi, Koichi*; Chanteclair, F.*; Chenaud, M.-S.*; et al.

EPJ Nuclear Sciences & Technologies (Internet), 8, p.11_1 - 11_10, 2022/06

https://doi.org/10.1051/epjn/2022006

This paper provides an overview of plant system studies to establish a common technical view for Sodium-cooled Fast Reactor concept between France and Japan based on ASTRID600 and the new concept with downsized output called ASTRID150. One of important issues on a reactor structure design is to enhance seismic resistance to be tolerable against strong earthquake such that postulated in Japan. A concept of High Frequency Design is shared, and the design options related to HFD have been examined and design recommendations are established. In addition, this paper include results of studies for a steam generator, a decay heat removal system, a fuel handling system and a containment vessel.