Intruder configurations in Ne at the transition into the island of inversion; Detailed structure study of Ne

Wang, H.*; Yasuda, Masahiro*; Kondo, Yosuke*; Nakamura, Takashi*; Tostevin, J. A.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Poves, A.*; Shimizu, Noritaka*; Yoshida, Kazuki; et al.

Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08

https://doi.org/10.1016/j.physletb.2023.138038

Detailed -ray spectroscopy of the exotic neon isotope Ne has been performed using the one-neutron removal reaction from Ne. Based on an analysis of parallel momentum distributions, a level scheme with spin-parity assignments has been constructed for Ne and the negative-parity states are identified for the first time. The measured partial cross sections and momentum distributions reveal a significant intruder p-wave strength providing evidence of the breakdown of the N = 20 and N = 28 shell gaps. Only a weak, possible f-wave strength was observed to bound final states. Large-scale shell-model calculations with different effective interactions do not reproduce the large p-wave and small f-wave strength observed experimentally, indicating an ongoing challenge for a complete theoretical description of the transition into the island of inversion along the Ne isotopic chain.

Experimental study of liquid spreading and atomization due to jet impingement in liquid-liquid systems

Yamamura, Sota*; Fujiwara, Kota*; Honda, Kota*; Yoshida, Hiroyuki; Horiguchi, Naoki; Kaneko, Akiko*; Abe, Yutaka*

Physics of Fluids, 34(8), p.082110_1 - 082110_13, 2022/08

https://doi.org/10.1063/5.0100340

Liquid spreading and atomization due to jet impingement in liquid-liquid systems are considered to be crucial for understanding the cooling behavior of high-temperature molten material in a shallow water pool. This phenomenon takes place when a liquid jet enters a pool filled with other immiscible liquid. The jet spreads radially after impinging on the floor while forming a thin liquid film and atomizing droplets. In this paper, we explain the result to quantify the unsteady three-dimensional behavior of the spreading jet by the employment of 3D-LIF measurements and 3-dimensional reconstruction. Under high flow velocity conditions, the phenomena of hydraulic jump and atomization of the liquid film occurred along with the spreading. To evaluate the spreading behavior, a comparison of the jump radius position of the liquid-liquid system as the representative value was made with the one calculated by the existing theory of a gas-liquid system. As the result, the spreading of the liquid film in the liquid-liquid system was suppressed compared with that in the gas-liquid system. Furthermore, the PTV method was successfully used to measure the velocity boundary layer and velocity profile in the liquid film, which are important factors that affect the spreading mechanism of the liquid film. These results revealed that in liquid-liquid systems, shear stress at the liquid-liquid interface causes a decrease in the flow velocity and suppressed the development of the velocity boundary layer. Also, to evaluate the atomization behavior, the number and diameter distribution of the droplets were measured from the acquired 3-dimensional shape data of the jet. As the result, the number of droplets increased with the flow velocity. Based on these results, we concluded that the spreading of the liquid film is affected by such atomization behavior.

Development of dispersed phase tracking method for time-series 3-dimensional interface shape data

Horiguchi, Naoki; Yoshida, Hiroyuki; Yamamura, Sota*; Fujiwara, Kota*; Kaneko, Akiko*; Abe, Yutaka*

Proceedings of 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19) (Internet), 14 Pages, 2022/03

scattering length from photoproduction on the proton near the reaction threshold

Ishikawa, Takatsugu*; Fujimura, Hisako*; Fukasawa, Hiroshi*; Hashimoto, Ryo*; He, Q.*; Honda, Yuki*; Hosaka, Atsushi; Iwata, Takahiro*; Kaida, Shun*; Kasagi, Jirota*; et al.

Physical Review C, 101(5), p.052201_1 - 052201_6, 2020/05

https://doi.org/10.1103/PhysRevC.101.052201

Enhancement of element production by incomplete fusion reaction with weakly bound deuteron

Wang, H.*; Otsu, Hideaki*; Chiga, Nobuyuki*; Kawase, Shoichiro*; Takeuchi, Satoshi*; Sumikama, Toshiyuki*; Koyama, Shumpei*; Sakurai, Hiroyoshi*; Watanabe, Yukinobu*; Nakayama, Shinsuke; et al.

Communications Physics (Internet), 2(1), p.78_1 - 78_6, 2019/07

https://doi.org/10.1038/s42005-019-0165-1

Searching for effective pathways for the production of proton- and neutron-rich isotopes through an optimal combination of reaction mechanism and energy is one of the main driving forces behind experimental and theoretical nuclear reaction studies as well as for practical applications in nuclear transmutation of radioactive waste. We report on a study on incomplete fusion induced by deuteron, which contains one proton and one neutron with a weak binding energy and is easily broken up. This reaction study was achieved by measuring directly the cross sections for both proton and deuteron for Pd at 50 MeV/u via inverse kinematics technique. The results provide direct experimental evidence for the onset of a cross-section enhancement at high energy, indicating the potential of incomplete fusion induced by loosely-bound nuclei for creating proton-rich isotopes and nuclear transmutation of radioactive waste.

Redistribution and export of contaminated sediment within eastern Fukushima Prefecture due to typhoon flooding

Kitamura, Akihiro; Kurikami, Hiroshi; Sakuma, Kazuyuki; Malins, A.; Okumura, Masahiko; Machida, Masahiko; Mori, Koji*; Tada, Kazuhiro*; Tawara, Yasuhiro*; Kobayashi, Takamaru*; et al.

Earth Surface Processes and Landforms, 41(12), p.1708 - 1726, 2016/09

https://doi.org/10.1002/esp.3944

Sediment erosion and transport processes that are considered to be important in predicting the future radioactive material distribution through sediment-sorbed form in Fukushima Prefecture are simulated. Since large portion of the sediment is considered to be supplied into the rivers, it is important to trace their migration process in terms of each river basin. We choose five river basins, namely the Odaka, the Ukedo, the Maeda, the Kuma, and the Tomioka, from north to south, because of their importance in contamination aspects and prediction studies. The results are summarized as comprehensive dataset of sediment migration for particular river basins in typical typhoon events that account for the most of annual soil erosion. Detail calculations implemented for the amount of sediment supplied in to the river, deposited on river and dam beds, and exported to the ocean.

Radiation monitoring using manned helicopter around the Fukushima Daiichi Nuclear Power Station in the fiscal year 2014 (Contract research)

Sanada, Yukihisa; Mori, Airi; Ishizaki, Azusa; Munakata, Masahiro; Nakayama, Shinichi; Nishizawa, Yukiyasu; Urabe, Yoshimi; Nakanishi, Chika; Yamada, Tsutomu; Ishida, Mutsushi; et al.

JAEA-Research 2015-006, 81 Pages, 2015/07

JAEA-Research-2015-006.pdf:22.96MB

By the nuclear disaster of Fukushima Daiichi Nuclear Power Station (NPS), Tokyo Electric Power Company (TEPCO), caused by the East Japan earthquake and the following tsunami occurred on March 11, 2011, a large amount of radioactive materials was released from the NPP. These results of the aerial radiation monitoring using the manned helicopter in the fiscal 2014 were summarized in the report.

Feeder components and instrumentation for the JT-60SA magnet system

Yoshida, Kiyoshi; Kizu, Kaname; Murakami, Haruyuki; Kamiya, Koji; Honda, Atsushi; Onishi, Yoshihiro; Furukawa, Masato; Asakawa, Shuji; Kuramochi, Masaya; Kurihara, Kenichi

Fusion Engineering and Design, 88(9-10), p.1499 - 1504, 2013/10

https://doi.org/10.1016/j.fusengdes.2012.12.010

The modifying of the JT-60U magnet system to the superconducting coils (JT-60SA) is progressing as a satellite facility for ITER by both parties of Japanese government and European commission (EU) in the Broader Approach agreement. The magnet system for JT-60SA consists of 18 Toroidal Field (TF) coils, a Central Solenoid (CS) with 4 modules, and 6 Equilibrium Field (EF) coils. The manufacturing of the JT-60SA magnet system is in progress in EU and Japan. The JT-60SA superconducting magnet system generates an average heat load of 3.2 kW at 4 K to the cryoplant, from nuclear and thermal radiation, conduction and electromagnetic heating, and requires current supplies 20 kA for 4 CS modules and 6 EF coils, 25.7 kA to 18 TF coils. The helium flow to remove this heat, consisting of supercritical helium at pressures up to 0.5 MPa and temperature between 4.4-4.8 K, is distributed to the coils and structures through the valve box (VB) from the cryoline connecting to the auxiliary cold box located outside the torus hall. The feeders also contain the electrical supplies from the current lead transitions to room temperature to the coil. The feeder components consist of the in-cryostat feeders with flexible parts to allow coil operational displacements from the connection pipes out of the cryostat, including S-bend conductor to allow differential thermal contraction and the coil terminal boxes (CTBs) with HIS current leads. A measurement and control system is required to monitor and control these coils and feeders for safety and optimal operational availability. For each coil, both current and supercritical helium are supplied from external systems and are controlled from a central system as part of the regular operation with plasma pulses. Quench detection instruments for superconducting coils, feeders and HTS current leads are provided as a separate, stand alone system.

Investigation on cause of outage of Wide Range Monitor (WRM) in High Temperature engineering Test Reactor (HTTR); Transport operation toward investigation for cause of outage

Shinohara, Masanori; Sawahata, Hiroaki; Kawamoto, Taiki; Motegi, Toshihiro; Saito, Kenji; Takada, Shoji; Yoshida, Naoaki; Isozaki, Ryosuke; Katsuyama, Kozo

JAEA-Technology 2012-025, 31 Pages, 2012/08

JAEA-Technology-2012-025.pdf:4.69MB

An event, in which one of WRMs were disabled to detect the neutron flux in the reactor core, occurred during the period of reactor shut down of HTTR in March, 2010. The actual life time of WRM was unexpectedly shorter than the past developed life time. Investigation of the cause of the outage of WRM toward the recovery of the life time up to the developed life is one of the issues to develop the technology basis of High Temperature Gas cooled Reactor (HTGR). Then, a post irradiation examination was planned to specify the damaged part causing the event in the WRM was also planned. For the investigation, the X-ray computed tomography scanner in Fuels Monitoring Facility (FMF). This report describes the preliminary investigation on the cause of outage of the WRM. The results of study for transportation method of the irradiated WRM from HTTR to FMF is also reported with the record to complete the transport operation.

Performance analysis of fusion nuclear-data benchmark experiments for light to heavy materials in MeV energy region with a neutron spectrum shifter

Murata, Isao*; Ota, Masayuki*; Miyamaru, Hiroyuki*; Kondo, Keitaro; Yoshida, Shigeo*; Iida, Toshiyuki*; Ochiai, Kentaro; Konno, Chikara

Journal of Nuclear Materials, 417(1-3), p.1127 - 1130, 2011/10

https://doi.org/10.1016/j.jnucmat.2010.12.299

Nuclear data are indispensable for development of fusion reactor candidate materials. However, benchmarking of the nuclear data in MeV energy region is not sufficient even now. In the present study, benchmark performance in the MeV energy region was investigated theoretically in case of experiments by using a 14MeV neutron source. We carried out a systematical analysis for light to heavy materials. As a result, the benchmark performance for neutron spectrum was confirmed to be acceptable, while for -ray it was not sufficient. This indicates it was effective to use a spectrum shifter. As a shifter beryllium had the best performance. Moreover, it was preliminarily examined whether it is really acceptable that only the spectrum before last collision is considered in the benchmark performance analysis. It was pointed out that not only the last collision but also more previous collisions should be taken into account equally in the benchmark performance analysis.