Inspection and repair techniques in the reactor vessel of the experimental fast reactor Joyo; Replacement of upper core structure

Ito, Hiromichi*; Ota, Katsu; Kawahara, Hirotaka; Kobayashi, Tetsuhiko; Takamatsu, Misao; Nagai, Akinori

JAEA-Technology 2016-008, 87 Pages, 2016/05

JAEA-Technology-2016-008.pdf:18.11MB

In the experimental fast reactor Joyo, as a part of the restoration work of a partial dysfunction of fuel handling, the replacement of the upper core structure (UCS) was started from March 2014, and was completed in December 2014. In the jack-up test, the UCS was jacked-up to 1000 mm without significant sodium shearing resistance and interference. In the replacement of the UCS, a procedure was prepared with the use of wire-jack equipment assuming the interference. As a result, with the procedure and wire-jack were effectively functioned, the work was successfully completed.

Design and manufacture of Joyo upper core structure for replacement

Ota, Katsu; Ushiki, Hiroshi*; Maeda, Shigetaka; Kawahara, Hirotaka; Takamatsu, Misao; Kobayashi, Tetsuhiko; Kikuchi, Yuki; Tobita, Shigeharu; Nagai, Akinori

JAEA-Technology 2015-026, 180 Pages, 2015/11

JAEA-Technology-2015-026.pdf:79.87MB

In the experimental fast reactor Joyo, it was confirmed that the top of the irradiation test sub-assembly of "MARICO-2" (material testing rig with temperature control) had bent onto the in-vessel storage rack as an obstacle and had damaged the upper core structure (UCS). The replacement of the UCS was conducted from May to December 2014. The design and manufacture of UCS was started from 2008, and the installation of UCS was completed successfully in November 21th 2014. The major results gained during the design and manufacture of UCS is as follows.

Inspection and repair techniques in reactor vessel of sodium cooled fast reactor, 9-3; Replacement of UCS

Ota, Katsu; Ito, Hiromichi; Ushiki, Hiroshi; Yoshihara, Shizuya; Tobita, Shigeharu; Kawahara, Hirotaka; Hara, Masahide*; Okazaki, Hiroyoshi*; Tanaka, Junya*; Tatsuno, Takahiro*

no journal, , 

no abstracts in English

Current status of restoration work for obstacle and upper core structure in reactor vessel of experimental fast reactor "JOYO", 3-2; Replacement of upper core structure

Ushiki, Hiroshi; Ito, Hiromichi; Okuda, Eiji; Suzuki, Nobuhiro; Sasaki, Jun; Ota, Katsu; Kawahara, Hirotaka; Takamatsu, Misao; Nagai, Akinori; Okawa, Toshikatsu

no journal, , 

In the experimental fast reactor Joyo, it was confirmed that the top of the irradiation test sub-assembly of MARICO-2 (material testing rig with temperature control) had bent onto the in-vessel storage rack as an obstacle and had damaged the upper core structure (UCS) in 2007. As a part of the restoration work, UCS replacement was begun at March 24, 2014 and was completed at December 17. In-vessel repair (including observation) for sodium-cooled fast reactors (SFRs) is distinct from that for light water reactors and necessitates independent development. Application of developed in-vessel repair techniques to operation and maintenance of SFRs enhanced their safety and integrity. There is little UCS replacement experience in the world and this experience and insights, which were accumulated in the replacement work of in-vessel large sturucture (UCS) used for more than 30 years, are expected to improve the in-vessel repair techniques in SFRs.