Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Okutani, Akira*; Onishi, Hiroaki; Kimura, Shojiro*; Takeuchi, Tetsuya*; Kida, Takanori*; Mori, Michiyasu; Miyake, Atsushi*; Tokunaga, Masashi*; Kindo, Koichi*; Hagiwara, Masayuki*
Journal of the Physical Society of Japan, 90(4), p.044704_1 - 044704_9, 2021/04
Times Cited Count:3 Percentile:39.9(Physics, Multidisciplinary)Nishikino, Masaharu; Kawachi, Tetsuya; Hasegawa, Noboru; Ishino, Masahiko; Minami, Yasuo*; Suemoto, Toru*; Onishi, Naofumi*; Ito, Atsushi*; Sato, Katsutoshi*; Faenov, A.*; et al.
X-Ray Lasers and Coherent X-Ray Sources; Development and Applications XI (Proceedings of SPIE, Vol.9589), p.958902_1 - 958902_7, 2015/09
Hasegawa, Noboru; Nishikino, Masaharu; Tomita, Takuro*; Onishi, Naofumi*; Ito, Atsushi*; Eyama, Tsuyoshi*; Kakimoto, Naoya*; Izutsu, Rui*; Minami, Yasuo*; Baba, Motoyoshi*; et al.
X-Ray Lasers and Coherent X-Ray Sources; Development and Applications XI (Proceedings of SPIE, Vol.9589), p.95890A_1 - 95890A_8, 2015/09
Times Cited Count:1 Percentile:55.4(Optics)We have improved a soft X-ray laser (SXRL) interferometer synchronized with a Ti:Sapphire laser pulse to observe the single-shot imaging of the nano-scaled structure dynamics of the laser induced materials. By the precise imaging optics and double time fiducial system having been installed, the lateral resolution on the sample surface and the precision of the temporal synchronization between the SXRL and Ti:Sapphire laser pulses were improved to be 700 nm and 2 ps, respectively. By using this system, the initial stage (before 200 ps) of the ablation process of the Pt surface pumped by 80 fs Ti:Sapphire laser pulse was observed by the comparison between the soft X-ray reflective image and interferogram. We have succeeded in the direct observation of the unique ablation process around the ablation threshold such as the rapid increase of the surface roughness and surface vibration.
Hasegawa, Noboru; Tomita, Takuro*; Nishikino, Masaharu; Eyama, Tsuyoshi*; Kakimoto, Naoya*; Minami, Yasuo*; Baba, Motoyoshi*; Onishi, Naofumi*; Ito, Atsushi*; Kawachi, Tetsuya; et al.
JAEA-Conf 2015-001, p.17 - 20, 2015/07
We have succeeded in simultaneous observation of the ablation front and the expansion front with thin filmy structure in the femto-second laser ablation process of a gold target by using the 13.9 nm soft X-ray probe (incident angle to the sample 70 deg) with soft X-ray interferometer. The dependence on the laser local fluence and materials was obtained by the comparison between gold and tungsten.
Nishikino, Masaharu; Hasegawa, Noboru; Tomita, Takuro*; Eyama, Tsuyoshi*; Kakimoto, Naoya*; Onishi, Naofumi*; Ito, Atsushi*; Baba, Motoyoshi*; Minami, Yasuo*; Kawachi, Tetsuya; et al.
Reza Gakkai Dai-471-Kai Kenkyukai Hokoku; Tanhacho Ryoshi Bimu Hassei To Sono Oyo, p.9 - 12, 2014/12
no abstracts in English
Nishikino, Masaharu; Hasegawa, Noboru; Ishino, Masahiko; Yamagiwa, Mitsuru; Kawachi, Tetsuya; Minami, Yasuo*; Terakawa, Kota*; Takei, Ryota*; Baba, Motoyoshi*; Suemoto, Toru; et al.
JAEA-Conf 2013-001, p.16 - 19, 2013/09
The dynamics of the femtosecond laser ablation is still not clear at the early stage. Several studies on the time-resolved imaging of femtosecond laser ablation process have been performed on various materials. In this study, we have demonstrated a pump and probe imaging of the metal surface morphology during the femtosecond laser ablation by using the laser-driven plasma induced soft X-ray laser (SXRL) as a probe beam. The pumping laser used for ablation was a Ti:Sapphire laser system based on chirped pulse amplification. The pump beam had a Gaussian profile and the focal spot size on the metal surface was about 70 micron at FWHM. The dependence for the pump laser fluence of the ablation surface expansion and the surface condition (roughness and density gradient) were observed from the soft X-ray interferogram and reflective image, respectively.
Nishikino, Masaharu; Hasegawa, Noboru; Tomita, Takuro*; Minami, Yasuo*; Takei, Ryota*; Baba, Motoyoshi*; Eyama, Tsuyoshi*; Takayoshi, Shodai*; Kawachi, Tetsuya; Hatomi, Daiki*; et al.
Proceedings of SPIE, Vol.8849, p.88490E_1 - 88490E_6, 2013/09
Times Cited Count:2 Percentile:73.05(Optics)We have developed the pump and probe interferometer and reflective imaging technique of the metal surfaces during the femtosecond laser ablation by using the laser-driven soft X-ray laser at the wavelength of 13.9 nm. The pumping laser used for ablation was a Ti: Sapphire laser pulse with the duration of 80 fs pulse at a central wavelength of 795 nm, and had a gaussian spatial profile. By using the X-ray imaging technique, the time resolved image of nano-scaled ablation dynamics of the platinum and the gold pumped by a femtosecond laser pulse was obtained.
Sumi, Mika; Masashige, Kobayashi,*; Onishi, Sumitaka; Suzuki, Toru; Li, T. K.*; Vo, D.*
Final Program P.657 #229, 657- Pages, 2004/00
The Isotope Dilution Gamma-ray Spectrometry (IDGS) technique has developed at LANL. Feasibility study to implement IDGS for measuring MOX samples at PFC has performed and its results will be presented.
; Kobayashi, Hideo; ; Onishi, Sumitaka; ; ; *
JNC TN8440 2002-017, 33 Pages, 2003/02
The fabrication of the Experimental fast reactor "JOYO" MK-III core fuel has been carried out from 2001 to 2002. Chemical analysis and physical-property measurements of feed powder, dry recovered powder, blended MOX powder and fuel pellet have been carried out for purposes of the process control, the material accountancy, and the quality assurance of fuel pellet as a product. All the results of analysis and measurement related to the fabrication of Experimental fast reactor "JOYO" MK-III core fuel are reported.
; Maki, Akira; ; ; ; ; Fukuda, Kazuhito
JNC TN8410 2001-023, 188 Pages, 2001/11
"The 4th technological meeting of Tokai Reprocessing Plant (TRP)" was held in JNFL Rokkasyo site on octorber 11, 2001. The report contains the proceedings, transparancies and questionnaires of themeetin. This time, we reported about "Maintenance and repair results of Tokai Reprocessing Plant" based on technology and knowledge accumulated in Tokai Reprocessing Plant.
Ogata, Yoshiaki; ; Ochiai, Kazuya; ; ;
PNC TN8410 91-275, 125 Pages, 1991/11
None
Ouchi, Jin; Sanyoshi, Hirotaka*; ; Kishimoto, Yoichiro; Kawata, Tomio*; ; *; *
PNC TN8410 87-011, 253 Pages, 1987/01
None
Hayashi, Shotaro; ; Wada, Koji; ; Wada, Yukio; Sone, Toru
PNC TN841 85-32, 31 Pages, 1985/06
no abstracts in English
; Ouchi, Yoshifusa; Sone, Toru; ; Tayama, Toshimitsu
PNC TN852 82-10, 33 Pages, 1982/04
None
; Ouchi, Yoshifusa; Tayama, Toshimitsu; *
PNC TN841 82-20, 16 Pages, 1982/03
no abstracts in English
Kaya, Akira; Ouchi, Yoshifusa; ; *; Sone, Toru; Sakai, Fumiaki;
PNC TN841 80-30, , 1980/05
no abstracts in English
Kuriyama, Isamu; *; *; *; *
Hitachi Hyoron, 58(3), p.247 - 252, 1976/03
no abstracts in English