Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kato, Chiaki; Yamagishi, Isao; Sato, Tomonori; Yamamoto, Masahiro*
Zairyo To Kankyo, 70(12), p.441 - 447, 2021/12
Zeolite particles have been used in a Cs adsorption vessel for purification of contaminated water in Fukushima Dai-ich Nuclear Power Station (1F). The used Cs adsorption vessels were kept in storage space on 1F site. The risk of localized corrosion of stainless steel used in the vessel was worried. To evaluate the risk of localized corrosion, using specially designed electrochemical testing apparatus was used under gamma-ray irradiation test. And, real size mock-up test conducted. The results showed the potential change caused by creation of H
O by water radiolysis decreased by zeolite particles and the enrichment of chloride ion concentration in the vessel do not propagate during dry up procedure of Cs adsorption vessel. These data indicate the risk of localized corrosion of Cs adsorption vessel may stay at considerably low level.
Igarashi, Takahiro; Komatsu, Atsushi; Motooka, Takafumi*; Ueno, Fumiyoshi; Yamamoto, Masahiro
Corrosion Science and Technology, 20(3), p.105 - 111, 2021/06
We constructed three dimensional computational model using cellular automata method to simulate the intergranular corrosion propagation of stainless steel. In the model, the computational system was constructed by three types of cells: grain (bulk), grain boundary (GB), and solution cell. Our simulations revealed that the surface roughness calculated by the model adopted distributed dissolution rates of GBs was greater than that adopted constant dissolution rates of GBs. The cross-sectional images obtained by our simulation were comparable with that obtained by corrosion tests. These results indicate that the surface roughness during corrosion relates the distribution of corrosion rate.
Yamamoto, Masahiro
Keisan Kogaku, 25(3), p.4105 - 4108, 2020/07
Recently, some attempts using Multi-Physics simulation for corrosion problems, especially crevice corrosion, have been increasing. Corrosion undergoes by electrochemical reaction. The numerical calculation procedure is used a non-liner equation. Furthermore, this reaction is affected by environmental factors, i.e. composition, amount and mobility of chemical species and redox potential. These values change with time by corrosion process itself. This report, these needs for Multi-Physics calculations are introduced.
Yamamoto, Masahiro
Zairyo To Kankyo 2020 Koenshu (CD-ROM), p.9 - 16, 2020/05
The author has been continuing research and development for corrosion science for about forty years. One of the main targets of his research is applying computational science techniques on corrosion problems. The results are briefly introduced in this article. Also, the author organized some workshop for corrosion problems of 1F decommissioning procedure for several years. Such activities are evaluated for receiving the society award in JSCE.
Yamamoto, Masahiro; Irisawa, Eriko; Igarashi, Takahiro; Komatsu, Atsushi; Kato, Chiaki; Ueno, Fumiyoshi
Proceedings of Annual Congress of the European Federation of Corrosion (EUROCORR 2019) (Internet), 5 Pages, 2019/09
Intergranular corrosion phenomena were analysed using modified reprocessing solution. The data indicated that corrosion rates increased with time at the initial stage, and these stayed at constant value. Intergranular corrosion propagated at grain boundary in the initial stage and then attacked whole grain boundary causing drop out of grains. Corrosion rates of steady state were sum of intergranular corrosion amounts and weight losses of dropped grains. Surface appearances and cross sections of corroded samples were analyzed. The results indicated that the initial stage of intergranular corrosion was characterized by the ratio of corrosion rates between grain boundary and matrix. These ratios differed from individual grain boundaries. Total corrosion rates were affected by the distribution of these ratios. These data were based on the numerical modelling of intergranular corrosion using cellular automata. And also, calculated results were compared with these analytical data.
Otani, Kyohei; Sato, Tomonori; Kaji, Yoshiyuki; Yamamoto, Masahiro
JAEA-Review 2019-007, 15 Pages, 2019/06
JAEA-Review-2019-007.pdf:2.35MB
Metallic pipes under solid-liquid two phase flow is damaged by collision of solid particle to the pipe walls, and this phenomenon is named "erosion". In the case of the liquid is corrosive solution, further damage is occurred on the pipe walls chemically, and this named "erosion-corrosion". In the Fukushima Daiichi decommissioning project, the fuel debris will be crushed during removal operation of the debris and micro debris particles would be generated. It is estimated that the pipes of the circulating cooling system would be damaged under the solid-liquid two phase flow containing fuel debris particles. For the reason, the previous study about erosion and erosion-corrosion of metallic materials under solid-liquid two phase flow was surveyed. The survey showed that the damage rate by erosion and erosion-corrosion is influence by a lot of parameter in comparison to the corrosion rate which occurred in no-flow solution. Therefore, it is necessary to pay attention to selecting the experimental method and condition before the investigation about erosion-corrosion of metallic materials under solid-liquid two phase flow is carried out.
Irisawa, Eriko; Yamamoto, Masahiro; Kato, Chiaki; Motooka, Takafumi; Ban, Yasutoshi
Journal of Nuclear Science and Technology, 56(4), p.337 - 344, 2019/04
Times Cited Count：6 Percentile：48.99(Nuclear Science & Technology)Yamamoto, Masahiro; Soma, Yasutaka; Igarashi, Takahiro; Ueno, Fumiyoshi
Proceedings of Annual Congress of the European Federation of Corrosion (EUROCORR 2018) (USB Flash Drive), 7 Pages, 2018/09
In order to clarify the SCC behavior of SUS316L under BWR environment, mass transfer inside crevice of SUS316L in high temperature water using various crevice gap samples was investigated. The samples were prepared by put together two SUS316L sheets. Crevice gap differs from 0.005 mm to 0.1 mm. Corrosion tests were conducted in 8 ppm dissolved oxygen (DO) conditions. Surface oxide film was analysed by laser Raman spectroscopy (LRS) after immersion. Numerical simulations were also conducted by using COMSOL Maltiphysics. Diffusion process of DO and the other chemical species were calculated with connected to electrochemical process. Electrical conductivities inside the crevice were 100 times larger than these of outer water. The reason of high conductivity is existence of Fe
ions at the DO depletion crevice.
Yamamoto, Masahiro; Sato, Tomonori; Igarashi, Takahiro; Ueno, Fumiyoshi; Soma, Yasutaka
Proceedings of European Corrosion Congress 2017 (EUROCORR 2017) and 20th ICC & Process Safety Congress 2017 (USB Flash Drive), 6 Pages, 2018/09
The authors have studied the differences between outer surface and the crevice-like portion of SUS316L in high pressurized and high temperature water containing dissolved oxygen. We have already introduced that changes in the characteristics of corrosion products along the crevice directions and gap width. It is suggested that the environmental conditions are different with the features of crevice from these results. In this report, we introduce the changes in oxide films with crevice gaps and comparison with the numerical simulation data utilizing of FEM calculation.
Aoki, So; Kondo, Keietsu; Kaji, Yoshiyuki; Yamamoto, Masahiro
Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Vol.2, p.663 - 672, 2018/00
Times Cited Count：2 Percentile：58(Materials Science, Multidisciplinary)The objective of this study was to clarify effect of long-term thermal aging on SCC initiation susceptibility in low carbon austenitic stainless steels. Specimens used were Type 304L and 316L steels. Both steels were cold rolled to 20% thickness reduction (CW) and then followed by long-term thermal aging at 288
C for 14,000 h (LTA). Crevice Bent Beam (CBB) test was carried out to estimate the SCC initiation susceptibility under BWR simulated water condition at high temperature. The present results of the CBB tests showed that 304L CW + LTA exhibited no SCC susceptibility. In contrast, the SCC initiation susceptibility of 316L increased by the combination of cold rolling and long-term thermal aging. To understand these results, evaluation on the changes in microchemistry, microstructure and mechanical properties induced by the CW and LTA treatment has been developed, and their correlation with the SCC initiation susceptibility is discussed.
Irisawa, Eriko; Kato, Chiaki; Kamoshida, Michio*; Hakamatsuka, Yasuyuki*; Ueno, Fumiyoshi; Yamamoto, Masahiro
Proceedings of European Corrosion Congress 2017 (EUROCORR 2017) and 20th ICC & Process Safety Congress 2017 (USB Flash Drive), 9 Pages, 2017/09
Yamamoto, Masahiro
Zairyo To Kankyo 2017 Koenshu (CD-ROM), 4 Pages, 2017/05
The committee surveying the corrosion losses in Japan was established in 1976, with conjunction of the Japan Society of Corrosion Engineering and the Japan Association of Corrosion Control. The report made by the committee introduced that corrosion loss was estimated to be about 1.8% of GDP (Gross Domestic Product). About quarter century had passed after the first survey, JSCE and JACC made the second surveying committee for the cost of corrosion in Japan in 1998. During that time, Japan's economic circumstances had changed drastically. In this report, results and problems of the former two researches are summarized.
Ouchi, Kazuki; Otobe, Haruyoshi; Kitatsuji, Yoshihiro; Yamamoto, Masahiro
ECS Transactions, 75(27), p.51 - 57, 2017/01
Times Cited Count：1 Percentile：38.46(Electrochemistry)We investigated the deposition of U(IV) following a valence change of U as electrodeposition using an electrochemical quartz crystal microbalance (EQCM). When measurements of the reduction of U(VI) in a weak acid solution were performed, deposits of U(IV) were observed on the electrode surface. From deposition rates, pH dependence of them, and oxidation potentials of deposits, we proposed the following deposition mechanism. The deposition is divided into the three phases; First, in the induction phase, U(IV) produced by the disproportionation forms U(IV) hydroxide nucleus. Next, in the growth phase, U(IV) deposits begin to grow. In this phase, the deposits catalyze the reduction of U(V) to U(IV), resulting an increase of the reduction current. Finally, in the transformation phase, U(IV) hydroxide species transform into U dioxide having more stable state.
Yamamoto, Masahiro
Zairyo To Kankyo, 66(1), p.3 - 12, 2017/01
The laboratory simulation tests which could be reproduced the corrosion reactions propagating in the actual environments were utilized to analyze the mechanism of corrosion phenomena. In this report, some results are introduced in the cases of maritime structures and nuclear facilities. Experimental apparatus was originally designed to obtain the data in high radioactive condition simulating actual plants. One is a result showing the effect of Np ion to the corrosion of stainless steel in nuclear fuel reprocessing plant. Corrosion mechanism was revealed that Np
ion is reduced to Np
ion by a corrosion reaction of stainless steel and then re-oxidized to Np ion in the bulk solution. And repetition of this cycle accelerated corrosion of stainless steel by a little amounts of Np addition in nitric acid solution. Another result is introduced that an effect of HO created by radiolysis of cooling water at high radioactive environment in light water reactor.
Kato, Chiaki; Ishijima, Yasuhiro; Ueno, Fumiyoshi; Yamamoto, Masahiro
Journal of Nuclear Science and Technology, 53(9), p.1371 - 1379, 2016/09
Times Cited Count：4 Percentile：36.53(Nuclear Science & Technology)The effects of crystal textures and the potentials in the anodic oxidation of zirconium in a boiling nitric acid solution were investigated to study the stress corrosion cracking of zirconium in nitric acid solutions. The growth of the zirconium oxide film dramatically changed depending on the applied potential at a closed depassivation potential (1.47 V vs. SSE). At 1.5 V, the zirconium oxide film rapidly grows, and its growth exhibits cyclic oxidation kinetics in accordance with a nearly cubic rate law. The zirconium oxide film grows according to the quantity of electric charge, and the growth rate does not depend on the crystal texture in the pretransition region before the cyclic oxidation kinetics. However, the growth and cracking under the thick oxide film depend on the crystal texture in the transition region. On the normal direction side, the oxide film thickness decreases on average since some areas of the thick oxide film are separated from the specimen surface owing to the cracks in the thick oxide. On the rolling direction side, cracks are found under the thick oxide film, which deeply propagate along the RD without an external stress. The cracks under the thick oxide film propagate to the center of the oxide layer. The cracks in the oxide layer propagate in the (0002)Zr plane in the zirconium matrix. The oxide layer consists of string-like zirconium oxide and zirconium hydride. The string-like zirconium oxide contains orthorhombic ZrO in addition to monoclinic ZrO. As one assumption for the mechanism of crack initiation and propagation without an external stress, it is considered that the oxidizing zirconium hydrides precipitate in the (0002)Zr and then the phase transformation from orthorhombic ZrO to monoclinic ZrO in the oxide layer causes the crack propagation in the (0002) plane.
Motooka, Takafumi; Ueno, Fumiyoshi; Yamamoto, Masahiro
Proceedings of 2016 EFCOG Nuclear & Facility Safety Workshop (Internet), 6 Pages, 2016/09
At the Fukushima Daiichi nuclear accident, seawater was injected into spent fuel pools of Unit 2-4 for the emergency cooling. Seawater might cause localized corrosion of spent fuel cladding. This would lead to leakage of not only fissile materials but also fission products from fuel cladding. The behavior, however, is not understood well. In this paper, the effects of seawater on corrosion behavior and mechanical property of were studied by using a spent fuel cladding from a BWR. We immersed the spent cladding tubes in diluted artificial seawater for 300h at 353 K, and conducted their visual, cross-sectional and strength examinations. As a localized corrosion index, the pitting potentials of specimens fabricated from the cladding were measured as functions of chloride ion concentration ranging from 20 to 2500 ppm. The visual examination showed that localized corrosion has not occurred, and cross-sectional examination showed no cracks. The strength of immersed tubes was comparable to that of non-immersed tubes. Additionally, pitting potential could not be measured over 1.0 V; pitting corrosion was hardly occurred. These results suggested that the specimens from the spent fuel cladding tube was very resistant to localized corrosion.
Ueno, Fumiyoshi; Irisawa, Eriko; Kato, Chiaki; Igarashi, Takahiro; Yamamoto, Masahiro; Abe, Hitoshi
Proceedings of European Corrosion Congress 2016 (EUROCORR 2016) (USB Flash Drive), 7 Pages, 2016/09
In this study, we focused on the effect of the boiling of nitric acid solution on the corrosion of a stainless steel-made concentrator in reduced pressure in fuel reprocessing plant. In order to perform the simulation test in a non-radioactive condition, nitric acid solution with the addition of vanadium as an oxidizing metal ion were used. Corrosion tests were carried out under the conditions of boiling at reduced pressure, and of non-boiling at normal pressure and several temperatures. As a result, corrosion was accelerated by the solution boiling while it was not by non-boiling at the same temperature. It was found also that the temperature dependence of corrosion rate is the same in the both conditions of boiling and non-boiling. The corrosion accelerating effect will be discussed on the basis of the reaction among nitric acid, NOx and vanadium, etc.
Yamamoto, Masahiro
Zairyo To Kankyo 2016 Koenshu (CD-ROM), p.1 - 8, 2016/05
I will make a presentation for "Go Okamoto Memorial Lecture" at coming Zairyo to Kankyo 2016 Symposium. I will introduce the data analysis method using reproducing experiment for an actual environment. The examples will be shown in case of maritime structure and nuclear engineering plant.
-ray irradiated neutral water conditionYamamoto, Masahiro; Komatsu, Atsushi; Sato, Tomonori; Nakano, Junichi; Ueno, Fumiyoshi
Proceedings of 17th Asian Pacific Corrosion Control Conference (APCCC-17) (USB Flash Drive), 8 Pages, 2016/01
In Fukushima-Daiichi Nuclear Power Station, decommissioning procedures are continuing more than 30 years until fuel debris removal. It is important to keep soundness of primary container vessel (PCV), made of carbon steel, during these procedures. Corrosion of carbon steel is well-known to be controlled by cathodic reaction, in usual, oxygen reduction reaction. Corrosion of carbon steel could be mitigated by nitrogen injection procedure. However, a lot of radioactive materials exist in cooling water, an effect of radiolysis product on corrosion is an important problem. Clarifying an irradiation effect for corrosion of carbon steel, corrosion test was conducted in 
Co -ray irradiated condition. Electrochemical measurements were conducted to determine cathodic current density of samples. Corrosion rates of carbon steel decrease with time in both -ray irradiated and non-irradiated conditions. Measured values of cathodic current density gradually decreased with time and then stayed at constant value.
Yoshida, Masafumi; Hanada, Masaya; Kojima, Atsushi; Kashiwagi, Mieko; Grisham, L. R.*; Hatayama, Akiyoshi*; Shibata, Takanori*; Yamamoto, Takashi*; Akino, Noboru; Endo, Yasuei; et al.
Fusion Engineering and Design, 96-97, p.616 - 619, 2015/10
Times Cited Count：11 Percentile：67.3(Nuclear Science & Technology)In JT-60 Super Advanced for the fusion experiment, 22A, 100s negative ions are designed to be extracted from the world largest ion extraction area of 450 mm 
1100 mm. One of the key issues for producing such as high current beams is to improve non-uniform production of the negative ions. In order to improve the uniformity of the negative ions, a tent-shaped magnetic filter has newly been developed and tested for JT-60SA negative ion source. The original tent-shaped filter significantly improved the logitudunal uniformity of the extracted H
ion beams. The logitudinal uniform areas within a 
10 deviation of the beam intensity were improved from 45% to 70% of the ion extraction area. However, this improvement degrades a horizontal uniformity. For this, the uniform areas was no more than 55% of the total ion extraction area. In order to improve the horizontal uniformity, the filter strength has been reduced from 660 Gasus
cm to 400 Gasuscm. This reduction improved the horizontal uniform area from 75% to 90% without degrading the logitudinal uniformity. This resulted in the improvement of the uniform area from 45% of the total ion extraction areas. This improvement of the uniform area leads to the production of a 22A H ion beam from 450 mm 1100 mm with a small amount increase of electron current of 10%. The obtained beam current fulfills the requirement for JT-60SA.
