Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Niwa, Masakazu; Shimada, Koji; Terusawa, Shuji*; Goto, Akira*; Nishiyama, Nariaki; Nakajima, Toru; Ishihara, Takanori; Hakoiwa, Hiroaki
Island Arc, 33(1), p.e12516_1 - e12516_16, 2024/02
Times Cited Count：0 Percentile：0.02(Geosciences, Multidisciplinary)To investigate the geological evidence of near-surface crustal deformations in a high-strain shear zone that has been geodetically identified but not associated with clear tectonic landforms, a fieldwork was conducted in E-W trending southern Kyushu high-strain shear zone, Japan. According to our study, an investigation based on the slip data from minor faults and the occurrences of fracture zones could help to identify a concealed fault that is small in terms of size to record tectonic landforms but can trigger large earthquakes.
Niwa, Masakazu; Shimada, Koji; Sueoka, Shigeru; Fujita, Natsuko; Yokoyama, Tatsunori; Ogita, Yasuhiro; Fukuda, Shoma; Nakajima, Toru; Kagami, Saya; Ogata, Manabu; et al.
JAEA-Review 2023-017, 27 Pages, 2023/10
JAEA-Review-2023-017.pdf:0.94MB
This report is a plan of research and development (R&D) on geosphere stability for long-term isolation of high-level radioactive waste (HLW) in Japan Atomic Energy Agency (JAEA), in fiscal year 2023. The objectives and contents in fiscal year 2023 are described in detail based on the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028). In addition, the background of this research is described from the necessity and the significance for site investigation and safety assessment, and the past progress. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques.
Niwa, Masakazu; Shimada, Koji; Sueoka, Shigeru; Ishihara, Takanori; Ogawa, Hiroki; Hakoiwa, Hiroaki; Watanabe, Tsuyoshi; Nishiyama, Nariaki; Yokoyama, Tatsunori; Ogata, Manabu; et al.
JAEA-Research 2023-005, 78 Pages, 2023/10
JAEA-Research-2023-005.pdf:6.51MB
This annual report documents the progress of research and development (R&D) in the 1st fiscal year of the Japan Atomic Energy Agency 4th Medium- and Long-term Plan (fiscal years 2022-2028) to provide the scientific base for assessing geosphere stability for long-term isolation of high-level radioactive waste. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques. The current status of R&D activities with previous scientific and technological progress is summarized.
Nishiyama, Nariaki; Kawamura, Makoto; Umeda, Koji*; Niwa, Masakazu
Oyo Chishitsu, 64(3), p.98 - 111, 2023/08
It is important to accumulate research examples on the spatial distribution of dikes under volcanic edifices for risk assessment in volcanic disaster prevention and site selection and safety assessment for the geological disposal of high-level radioactive waste. The topography of volcanoes is considered to represent the location of magma intrusion associated with volcanic activity and its history. In this study, we attempted to determine the predominant orientation of radial dikes and evaluate the central conduit stability based on the distribution, centroid, and area of contour lines comprising the volcanic edifices using GIS-based topographic analysis. As a result of the topographic analysis, the predominant orientation of the dikes was successfully shown for the volcanoes with stable conduits. On the other hand, this analysis was not suitable for determine the predominant orientation of dikes in volcanoes with unstable conduits, thus the applicable range of this analysis is considered to be determined by the conduit stability. In addition, the conduit stability can be evaluated by using the area data of contour polygons, which represents the scope of application to the method for determination of the predominant orientation of dikes. This means that the conduit stability during volcanic activity can be evaluated even for volcanoes of which activity history is not yet known, and that topographic analysis is a useful tool for this purpose. The use of topographic analysis in this study will be expected to provide a new scale for the history of volcanic activity.
Murakami, Hiroaki; Nishiyama, Nariaki; Takeuchi, Ryuji; Iwatsuki, Teruki
Oyo Chishitsu, 64(2), p.60 - 69, 2023/06
In order to confirm the quality control items for borehole closure in radioactive waste disposal projects, in-situ borehole sealing tests using bentonite material were conducted. As a result, the closure performance was successfully demonstrated by comparing the data of water injection tests conducted before and after the installation of the closure material. However, the breakthrough was observed after closing, probably due to high differential pressure applied to the seal section. Thus, it is important to ascertain throughout the entire operation that the borehole is adequately closed. The placement and specifications of the closure material should be determined according to the hydrogeological structure in the borehole. The confirmation items to use bentonite for sealing material are identified to be: to consider swelling and density loss in the borehole; to place the planned depth using appropriate emplacement technique; to be placed without damage to seals when use some backfilling materials, considering effect of permeability on adjacent seals.
Nishiyama, Nariaki; Goto, Akira*; Tsukahara, Yuzuko; Kawamura, Makoto; Umeda, Koji*; Niwa, Masakazu
JAEA-Testing 2022-003, 51 Pages, 2022/09
JAEA-Testing-2022-003.pdf:5.24MB
JAEA-Testing-2022-003-appendix(CD-ROM).zip:1.12MB
Advancement of the evaluation technology of the magma activity range is essential as one of the technical issues related to volcanic and igneous activities in the evaluation of the long-term stability of the geological environment in the geological disposal of high-level radioactive waste. As an effective method, topographical analysis of volcanic edifices is expected to be used to determine the distribution area of dikes. In recent years, the development of computer-based topographic analysis technology has made it possible to simply perform a large volume of work that would otherwise be difficult due to the manual handling. This report describes an analysis method for the shape of contour lines that forms volcanic edifices using GIS software.
Murakami, Hiroaki; Iwatsuki, Teruki; Takeuchi, Ryuji; Nishiyama, Nariaki*
Genshiryoku Bakkuendo Kenkyu (CD-ROM), 27(1), p.22 - 33, 2020/06
Geological disposal of radioactive waste requires the large amounts of fundamental technical knowledge throughout the project. Monitoring is carried out to collect site-relevant information for the creation of an environmental database, to assist in the decision-making process, etc. We summarized the current technical level and problems of the groundwater monitoring in the world. Through the research and technology development so far, the technologies have been developed for drilling borehole in the geological environment survey prior to monitoring and the selection of the monitoring site. However, the following technical developments are remaining issues: long-term operation method of monitoring equipment, retrieving method of monitoring equipment after long-term operation, transport method of backfill material for borehole sealing, technical basis for the sealing performance when the borehole-protective casing and strainer tube are left.
Theis, C.*; Carbonez, P.*; Feldbaumer, E.*; Forkel-Wirth, D.*; Jaegerhofer, L.*; Pangallo, M.*; Perrin, D.*; Urscheler, C.*; Roesler, S.*; Vincke, H.*; et al.
EPJ Web of Conferences, 153, p.08018_1 - 08018_5, 2017/09
Times Cited Count：0 Percentile：0.03(Nuclear Science & Technology)At CERN, gas-filled ionization chambers PTW-34031 (PMI) are commonly used in radiation fields including neutrons, protons and 
-rays. A response function for each particle is calculated by the radiation transport code FLUKA. To validate a response function to high energy neutrons, benchmark experiments with quasi mono-energetic neutrons have been carried out at RCNP, Osaka University. For neutron irradiation with energies below 200 MeV, very good agreement was found comparing the FLUKA simulations and the measurements. In addition it was found that at proton energies of 250 and 392 MeV, results calculated with neutron sources underestimate the experimental data due to a non-negligible gamma component originating from the target 
Li(p,n)Be reaction.
Matsumoto, Tetsuro*; Masuda, Akihiko*; Nishiyama, Jun*; Iwase, Hiroshi*; Iwamoto, Yosuke; Satoh, Daiki; Hagiwara, Masayuki*; Yashima, Hiroshi*; Yashima, Hiroshi*; Shima, Tatsushi*; et al.
EPJ Web of Conferences, 153, p.08016_1 - 08016_3, 2017/09
Times Cited Count：1 Percentile：61.03(Nuclear Science & Technology)Neutron energy spectra behind concrete and iron shields were measured for quasi-monoenergetic neutrons above 200 MeV using a Bonner sphere spectrometer (BSS). Quasi-monoenergetic neutrons were produced by the Li(p,xn) reaction with 246-MeV and 389-MeV protons. The response function of BSS was also measured at neutron energies from 100 MeV to 387 MeV. In data analysis, the measured response function was used and the multiple neutron scattering effect between the BSS and the shielding material was considered. The neutron energy spectra behind the concrete and iron shields were obtained by the unfolding method using the MAXED code. Ambient dose equivalents were obtained as a function of a shield thickness successfully. For the case of the 244 MeV neutron incidence, the multiple neutron scattering effect on the effective dose is large under 50 cm thickness of the concrete shield.
Masuda, Akihiko*; Matsumoto, Tetsuro*; Iwamoto, Yosuke; Hagiwara, Masayuki*; Satoh, Daiki; Sato, Tatsuhiko; Iwase, Hiroshi*; Yashima, Hiroshi*; Nakane, Yoshihiro; Nishiyama, Jun*; et al.
Nuclear Instruments and Methods in Physics Research A, 849, p.94 - 101, 2017/03
Times Cited Count：1 Percentile：10.58(Instruments & Instrumentation)Quasi-monoenergetic high-energy neutron fields induced by Li(p,n) reactions are used for the response evaluation of neutron-sensitive devices. The quasi-monoenergetic high-energy field consists of high-energy monoenergetic peak neutrons and unwanted continuum neutrons down to the low-energy region. A two-angle differential method has been developed to compensate for the effect of the continuum neutrons in the response measurements. In this study, the two-angle differential method was demonstrated for Bonner sphere detectors, which are typical examples of moderator-based neutron-sensitive detectors, to investigate the method's applicability and its dependence on detector characteristics. Through this study, the adequacy of the two-angle differential method was experimentally verified, and practical suggestions were made pertaining to this method.
Matsumoto, Tetsuro*; Masuda, Akihiko*; Nishiyama, Jun*; Harano, Hideki*; Iwase, Hiroshi*; Iwamoto, Yosuke; Hagiwara, Masayuki*; Satoh, Daiki; Yashima, Hiroshi*; Nakane, Yoshihiro; et al.
Progress in Nuclear Science and Technology (Internet), 4, p.332 - 336, 2014/04
Recently, many high-energy accelerators are used for various fields. Shielding data for high-energy neutrons are therefore very important from the point of view of radiation protection in high energy accelerator facilities. However, the shielding experimental data for high energy neutrons above 100 MeV are very poor both in quality and in quantity. In this study, neutron penetration spectral fluence and ambient dose through iron and concrete shields were measured with a Bonner sphere spectrometer (BSS). Quasi-monoenergetic neutrons were produced by the Li(p,xn) reaction by bombarding a 1-cm thick Li target with 246-MeV and 389-MeV protons in the Research Center for Nuclear Physics (RCNP) of the Osaka University. Shielding materials are iron blocks with a thickness from 10 cm to 100 cm and concrete blocks with a thickness from 25 cm to 300 cm.
Masuda, Akihiko*; Matsumoto, Tetsuro*; Harano, Hideki*; Nishiyama, Jun*; Iwamoto, Yosuke; Hagiwara, Masayuki*; Satoh, Daiki; Iwase, Hiroshi*; Yashima, Hiroshi*; Nakamura, Takashi*; et al.
IEEE Transactions on Nuclear Science, 59(1), p.161 - 166, 2012/02
Times Cited Count：12 Percentile：66.47(Engineering, Electrical & Electronic)In this study, responses of Bonner sphere spectrometer (BSS) for 245 and 388 MeV neutrons was measured at RCNP, Osaka University. The neutrons are generated in the Li(p,n) reaction and its spectra consist of a high-energy peak and a continuum down to the low energy. Therefore, the observed counts of BSS caused by the continuum need to be subtracted. Adjusting a Li target angle and a collimator position, 0 deg and 30 deg component of generated neutron are available. While the 0 deg component contains both the peak and the continuum, the 30 deg component is considered to contain only the continuum. Therefore, the response of the peak is obtained. The spectra were measured using the time-of-flight (TOF) method with a NE213 scintillator.
Li(p,n) reactions at 246-389 MeVIwamoto, Yosuke; Hagiwara, Masayuki*; Satoh, Daiki; Iwase, Hiroshi*; Yashima, Hiroshi*; Itoga, Toshiro*; Sato, Tatsuhiko; Nakane, Yoshihiro; Nakashima, Hiroshi; Sakamoto, Yukio; et al.
Proceedings of 10th Meeting of the Task Force on Shielding Aspects of Accelerators, Targets and Irradiation Facilities (SATIF-10), p.53 - 61, 2011/03
The neutron energy spectra penetrating 10 to 100 cm thick iron and 25 to 200 cm thick concrete shields have been measured using 138, 243 and 387 MeV quasi-monoenergetic neutron sources at the Research Center for Nuclear Physics (RCNP) facility, Osaka University. The source neutrons were produced from a 1 cm thick lithium target bombarded with 140, 245 and 388 MeV protons. Two types of NE213 liquid organic scintillators and Bonner ball neutron spectrometers were used for the neutron energy spectrum measurement. The TOF and unfolding methods were applied to estimate the energy spectra behind the shield in the peak energy region and continuous energy region, respectively. We have also measured the neutron energy spectra and angular distribution of the source neutron above 1 MeV in the angular range from 0
to 30 with the TOF method. All measured data were compared with the PHITS Monte Carlo calculations.
Li(p,n) reactions at angles from 0 to 30Iwamoto, Yosuke; Hagiwara, Masayuki*; Satoh, Daiki; Iwase, Hiroshi*; Yashima, Hiroshi*; Itoga, Toshiro*; Sato, Tatsuhiko; Nakane, Yoshihiro; Nakashima, Hiroshi; Sakamoto, Yukio; et al.
Nuclear Instruments and Methods in Physics Research A, 629(1), p.43 - 49, 2011/02
Times Cited Count：21 Percentile：82.54(Instruments & Instrumentation)The authors measured the neutron energy spectra of a quasi-monoenergetic Li(p,n) neutron source with 246 and 389 MeV protons set at seven angles (0, 2.5, 5, 10, 15, 20 and 30), using a time-of-flight (TOF) method employing organic scintillators NE213 at the Research Center for Nuclear Physics (RCNP) of Osaka University. The energy spectra of the source neutrons were precisely deduced down to 2 MeV at 0 and 10 MeV at other angles. The cross sections of the peak neutron production reaction at 0 were on the 35-40 mb line of other experimental data, and the peak neutron angular distribution agreed well with the Taddeucci formula. Neutron energy spectra below 100 MeV at all angles were comparable, but the shapes of the continuum above 150 MeV changed considerably with the angle.
Nishiyama, Satoshi*; Onishi, Yuzo*; Sawada, Atsushi; Yano, Takao*
Doboku Gakkai Rombunshu, C, 65(4), p.776 - 788, 2009/10
This paper describes the simulation method to explain the mechanism of the permeability characteristics of specimens with single discontinuties under shear through shear-flow coupling tests, showing that on the shear stress-displacement curve obtained by the constant normal load testing, the water flowing through the discontinuties have different transmissibility-aperture width relation before or after the yield range. As a technique to serve this purpose, the lattice gas method, which is to substitute the fluid with particles and repeat letting them collide. With this technique, the factors of surface structure of discontinuties that determine the shear/permeability characteristics are identified.
Miyake, Yasuhiro*; Nishiyama, Kusuo*; Kawamura, Naritoshi*; Makimura, Shunsuke*; Strasser, P.*; Shimomura, Koichiro*; Beveridge, J. L.*; Kadono, Ryosuke*; Fukuchi, Koichi*; Sato, Nobuhiko*; et al.
Physica B; Condensed Matter, 374-375, p.484 - 487, 2006/03
Times Cited Count：6 Percentile：31.27(Physics, Condensed Matter)The construction of the Materials and Life Science building was started in the beginning of the fiscal year of 2004. After commissioning of the accelerator and beam transport sections in 2008, muon beams will be available for users in 2009. In this letter, the latest construction status of the J-PARC Muon Science Facility is reported.
Miyake, Yasuhiro*; Kawamura, Naritoshi*; Makimura, Shunsuke*; Strasser, P.*; Shimomura, Koichiro*; Nishiyama, Kusuo*; Beveridge, J. L.*; Kadono, Ryosuke*; Sato, Nobuhiko*; Fukuchi, Koichi*; et al.
Nuclear Physics B; Proceedings Supplements, 149, p.393 - 395, 2005/12
The J-PARC muon science experimental area is planned to be located in the integrated building of the facility for materials and life science study. One muon target will be installed upstream of the neutron target. The main feature of the facility is introduced.
Nishiyama, Satoshi*; Uehara, Shinichi*; Yano, Takao*; Saito, Ryuhei*; Uchida, Masahiro; Sawada, Atsushi; Takebe, Atsuji
JNC TY8400 2005-007, 70 Pages, 2005/03
JNC-TY8400-2005-007.pdf:2.24MB
None
Morimoto, Kyoichi; Kato, Masato; Nishiyama, Motokuni; Endo, Hideo; Kono, Shusaku; Uno, Hiroki*; Tamura, Tetsuya*; Sugata, Hiromasa*
JNC TN8400 2003-011, 32 Pages, 2003/01
JNC-TN8400-2003-011.pdf:0.62MB
MOX fuel containing Neptunium is being developed as candidate fuel for an advanced nuclear fuel recycle. In this report, influence of Np on the sintering behavior, phase separation behavior of MOX fuel pellets and the homogeneity of MOX fuel pellets were evaluated. It was observed that the high Np containing pellets had a low sintered density and the microstructure changes of the pellets during the sintering were slow compared with MOX without Np. The pellets were also analyzed via Ceramography, X-ray diffraction measurement and an electron probe microanalysis. The phase separation behavior of MOX with Np was similar to that of MOX. The homogeneity of the pellet produced with this experiment was acceptable to the fuel specification.
Onishi, Yuzo*; *; *; *;
JNC TY7400 2002-001, 87 Pages, 2002/03
JNC-TY7400-2002-001.pdf:28.68MB
None
