Stress measurement of stainless steel piping welds by complementary use of high-energy synchrotron X-rays and neutrons

Miura, Yasufumi*; Suzuki, Kenji*; Morooka, Satoshi; Shobu, Takahisa

Quantum Beam Science (Internet), 8(1), p.1_1 - 1_14, 2024/03

https://doi.org/10.3390/qubs8010001

Deuterium content and site occupancy in iron sulfide at high pressure and temperature determined using in situ neutron diffraction measurements

Abeykoon, S.*; Howard, C.*; Dominijanni, S.*; Eberhard, L.*; Kurnosov, A.*; Frost, D. J.*; Boffa Ballaran, T.*; Terasaki, Hidenori*; Sakamaki, Tatsuya*; Suzuki, Akio*; et al.

Journal of Geophysical Research; Solid Earth, 128(9), p.e2023JB026710_1 - e2023JB026710_17, 2023/09

https://doi.org/10.1029/2023JB026710

Small amounts of iron sulphide minerals are found in most rocks from the Earth's mantle and as inclusions trapped in natural diamonds. Hydrogen may dissolve into iron sulphide minerals under high pressures and temperature, but is most likely lost once pressure and temperature are removed. In this study, we determined deuterium contents in iron sulphide, held under high pressure and temperature conditions, using neutron diffraction measurements with 6-ram multi-anvil press at PLANET, J-PARC. Deuterium contents in iron sulphide were measured at high-P, up to 11.4 GPa and high-T to 1300 K in in situ neutron diffraction experiments. The total deuterium content increases with both P and T. The results are used to estimate hydrogen contents of iron sulphide minerals in the deep continental lithospheric mantle, which are found to be in the range 1700-2700 ppm. This corresponds to approximately 2-3 ppm of hydrogen in the bulk mantle.

Relationship between internal stress distribution and microstructure in a suspension-sprayed thermal barrier coating with a columnar structure

Yamazaki, Yasuhiro*; Shinomiya, Keisuke*; Okumura, Tadaharu*; Suzuki, Kenji*; Shobu, Takahisa; Nakamura, Yuiga*

Quantum Beam Science (Internet), 7(2), p.14_1 - 14_12, 2023/05

https://doi.org/10.3390/qubs7020014

A Study on stress measurement of weld part using double exposure method

Suzuki, Kenji*; Kura, Komoe*; Miura, Yasufumi*; Shiro, Ayumi*; Toyokawa, Hidenori*; Saji, Choji*; Kajiwara, Kentaro*; Shobu, Takahisa

Zairyo, 71(12), p.1005 - 1012, 2022/12

https://doi.org/10.2472/jsms.71.1005

This paper describes a stress measurement from a welded part of an austenitic stainless steel using synchrotron X-rays. Difficulty measuring the X-ray stress of the welded part is caused by the broadening of the diffraction spot in the radial and circumferential directions. The bending strains of the rectangular bar made of the welded part were measured using synchrotron white X-rays and the double exposure method. To improve the energy resolution, monochromatic synchrotron X-ray of 70 keV was used. The diffraction pattern showed the sharp arc like a pattern from texture material. The diffraction profile was obtained from the integral of the diffraction intensity in the direction of the circumference. The diffraction angle was determined using the double exposure method. As a result, the distribution of the residual stresses of the welded part could be measured.

Carrying-out of whole nuclear fuel materials in Plutonium Research Building No.1

Inagawa, Jun; Kitatsuji, Yoshihiro; Otobe, Haruyoshi; Nakada, Masami; Takano, Masahide; Akie, Hiroshi; Shimizu, Osamu; Komuro, Michiyasu; Oura, Hirofumi*; Nagai, Isao*; et al.

JAEA-Technology 2021-001, 144 Pages, 2021/08

JAEA-Technology-2021-001.pdf:12.98MB

Plutonium Research Building No.1 (Pu1) was qualified as a facility to decommission, and preparatory operations for decommission were worked by the research groups users and the facility managers of Pu1. The operation of transportation of whole nuclear materials in Pu1 to Back-end Cycle Key Element Research Facility (BECKY) completed at Dec. 2020. In the operation included evaluation of criticality safety for changing permission of the license for use nuclear fuel materials in BECKY, cask of the transportation, the registration request of the cask at the institute, the test transportation, formulation of plan for whole nuclear materials transportation, and the main transportation. This report circumstantially shows all of those process to help prospective decommission.

Alternation of magnetic anisotropy accompanied by metal-insulator transition in strained ultrathin manganite heterostructures

Kobayashi, Masaki*; Anh, L. D.*; Suzuki, Masahiro*; Kaneta-Takada, Shingo*; Takeda, Yukiharu; Fujimori, Shinichi; Shibata, Goro*; Tanaka, Arata*; Tanaka, Masaaki*; Oya, Shinobu*; et al.

Physical Review Applied (Internet), 15(6), p.064019_1 - 064019_10, 2021/06

https://doi.org/10.1103/PhysRevApplied.15.064019

Thermally altered subsurface material of asteroid (162173) Ryugu

Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

https://doi.org/10.1038/s41550-020-01271-2

Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.

A Unique high natural background radiation area; Dose assessment and perspectives

Hosoda, Masahiro*; Nugraha, E. D.*; Akata, Naofumi*; Yamada, Ryohei; Tamakuma, Yuki*; Sasaki, Michiya*; Kelleher, K.*; Yoshinaga, Shinji*; Suzuki, Takahito*; Rattanapongs, C. P.*; et al.

Science of the Total Environment, 750, p.142346_1 - 142346_11, 2021/01

https://doi.org/10.1016/j.scitotenv.2020.142346

The biological effects of low dose-rate radiation exposures on humans remains unknown. In fact, the Japanese nation still struggles with this issue after the Fukushima Dai-ichi Nuclear Power Plant accident. Recently, we have found a unique area in Indonesia where naturally high radiation levels are present, resulting in chronic low dose-rate radiation exposures. We aimed to estimate the comprehensive dose due to internal and external exposures at the particularly high natural radiation area, and to discuss the enhancement mechanism of radon. A car-borne survey was conducted to estimate the external doses from terrestrial radiation. Indoor radon measurements were made in 47 dwellings over three to five months, covering the two typical seasons, to estimate the internal doses. Atmospheric radon gases were simultaneously collected at several heights to evaluate the vertical distribution. The absorbed dose rates in air in the study area vary widely between 50 nGy h and 1109 nGy h. Indoor radon concentrations ranged from 124 Bq m to 1015 Bq m. That is, the indoor radon concentrations measured exceed the reference levels of 100 Bq m recommended by the World Health Organization. Furthermore, the outdoor radon concentrations measured were comparable to the high indoor radon concentrations. The annual effective dose due to external and internal exposures in the study area was estimated to be 27 mSv using the median values. It was found that many residents are receiving radiation exposure from natural radionuclides over the dose limit for occupational exposure to radiation workers. This enhanced outdoor radon concentration might be as a result of the stable atmospheric conditions generated at an exceptionally low altitude. Our findings suggest that this area provides a unique opportunity to conduct an epidemiological study related to health effects due to chronic low dose-rate radiation exposure.

The Impact of nuclear shape on the emergence of the neutron dripline

Tsunoda, Naofumi*; Otsuka, Takaharu; Takayanagi, Kazuo*; Shimizu, Noritaka*; Suzuki, Toshio*; Utsuno, Yutaka; Yoshida, Sota*; Ueno, Hideki*

Nature, 587, p.66 - 71, 2020/11

https://doi.org/10.1038/s41586-020-2848-x

no abstracts in English

FEMAXI-7 analysis for modeling benchmark for FeCrAl

Yamaji, Akifumi*; Susuki, Naomichi*; Kaji, Yoshiyuki

IAEA-TECDOC-1921, p.199 - 209, 2020/07

The thermo-physical models and irradiation behavior of FeCrAl as defined by the benchmark organizer have been implemented to FEMAXI-7. Analyses were carried out firstly for the specified normal operation condition. Then, some sensitivity analyses were carried out with different assumptions and model parameters. Under the normal operating condition, the predicted FeCrAl cladded fuel performance was similar to that of Zry cladded fuel with notable, but not major difference regarding late gap closure. Under the simulated LOCA conditions, the burst pressure could be evaluated. The predicted cladding creep strain at burst was mainly attributed to creep strain with negligible plastic strain. Overall, FEMAXI-7 analyses have demonstrated excellent robustness and flexibility in modeling FeCrAl-UO system under normal and LOCA conditions.