Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Oikawa, Kenichi; Sato, Hirotaka*; Watanabe, Kenichi*; Su, Y. H.; Shinohara, Takenao; Kai, Tetsuya; Kiyanagi, Yoshiaki*; Hasemi, Hiroyuki
Journal of Physics; Conference Series, 2605, p.012013_1 - 012013_6, 2023/10
Araki, Shohei; Gunji, Satoshi; Arakaki, Yu; Murakami, Takahiko; Yoshikawa, Tomoki; Hasegawa, Kenta; Tada, Yuta; Izawa, Kazuhiko; Suyama, Kenya
Proceedings of 4th Reactor Physics Asia Conference (RPHA2023) (Internet), 4 Pages, 2023/10
To conduct integrated thermal power measurements for the performance test of the modified STACY, we re-analyzed the experimental data measured in the solution fuel STACY using the activation method. We validated its feasibility under the limited number of activation detectors. The re-analyzed results of the activation method by using MVP and PHITS with JENDL-4.0 indicated that the effect of the difference of the position between activation detectors was small enough, and the results agreed with that of the fission product analysis within almost 10%. It is conceivable that the activation method could be adopted instead of the fission product analysis.
Misaki, Satoshi*; Miwa, Hiroko*; Ito, Takashi; Yoshida, Takefumi*; Hasegawa, Shingo*; Nakamura, Yukina*; Tokutake, Shunta*; Takabatake, Moe*; Shimomura, Koichiro*; Chun, W.-J.*; et al.
ACS Catalysis, 13(18), p.12281 - 12287, 2023/09
Times Cited Count:2 Percentile:39.99(Chemistry, Physical)Ishii, Katsunori; Morita, Keisuke; Noguchi, Hiroki; Aoki, Takeshi; Mizuta, Naoki; Hasegawa, Takeshi; Nagatsuka, Kentaro; Nomoto, Yasunobu; Shimizu, Atsushi; Iigaki, Kazuhiko; et al.
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 4 Pages, 2023/09
Arai, Yoichi; Watanabe, So; Hasegawa, Kenta; Okamura, Nobuo; Watanabe, Masayuki; Takeda, Keisuke*; Fukumoto, Hiroki*; Ago, Tomohiro*; Hagura, Naoto*; Tsukahara, Takehiko*
Nuclear Instruments and Methods in Physics Research B, 542, p.206 - 213, 2023/09
Times Cited Count:1 Percentile:0.02(Instruments & Instrumentation)Miyagawa, Akihisa*; Hayashi, Naoki*; Kuzure, Yoshiaki*; Takahashi, Takumi*; Iwamoto, Hibiki*; Arai, Tsuyoshi*; Nagatomo, Shigenori*; Miyazaki, Yasunori; Hasegawa, Kenta; Sano, Yuichi; et al.
Bulletin of the Chemical Society of Japan, 96(7), p.671 - 676, 2023/07
Times Cited Count:3 Percentile:65.78(Chemistry, Multidisciplinary)We investigated the distribution mechanism of Eu(III) in a single polymer-coated silica particle including nitrilotriacetamide (NTA) extractants known as HONTA and TOD2EHNTA. The present study provides a valuable approach for the evaluation and enhancement of the functionality of "single extractant-impregnated polymer-coated silica particle".
Onodera, Naoyuki; Idomura, Yasuhiro; Hasegawa, Yuta; Asahi, Yuichi; Inagaki, Atsushi*; Shimose, Kenichi*; Hirano, Kohin*
Keisan Kogaku Koenkai Rombunshu (CD-ROM), 28, 4 Pages, 2023/05
We have developed a multi-scale wind simulation code named CityLBM that can resolve entire cities to detailed streets. CityLBM enables a real time ensemble simulation for several km square area by applying the locally mesh-refined lattice Boltzmann method on GPU supercomputers. On the other hand, real-world wind simulations contain complex boundary conditions that cannot be modeled, so data assimilation techniques are needed to reflect observed data in the simulation. This study proposes an optimization method for ground surface temperature bias based on an ensemble Kalman filter to reproduce wind conditions within urban city blocks. As a verification of CityLBM, an Observing System Simulation Experiment (OSSE) is conducted for the central Tokyo area to estimate boundary conditions from observed near-surface temperature values.
Hasegawa, Kenta; Goto, Ichiro*; Miyazaki, Yasunori; Ambai, Hiromu; Watanabe, So; Watanabe, Masayuki; Sano, Yuichi; Takeuchi, Masayuki
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 5 Pages, 2023/05
Miyazawa, Takeshi; Kikuchi, Yuta*; Ando, Masami*; Yu, J.-H.*; Yabuuchi, Kiyohiro*; Nozawa, Takashi*; Tanigawa, Hiroyasu*; Nogami, Shuhei*; Hasegawa, Akira*
Journal of Nuclear Materials, 575, p.154239_1 - 154239_11, 2023/03
Times Cited Count:0 Percentile:0.01(Materials Science, Multidisciplinary)Arai, Yoichi; Hasegawa, Kenta; Watanabe, So; Watanabe, Masayuki; Minowa, Kazuki*; Matsuura, Haruaki*; Hagura, Naoto*; Katsuki, Kenta*; Arai, Tsuyoshi*; Konishi, Yasuhiro*
Journal of Radioanalytical and Nuclear Chemistry, 9 Pages, 2023/00
Times Cited Count:0 Percentile:0.01(Chemistry, Analytical)Fujita, Manami; Hasegawa, Shoichi; Hosomi, Kenji; Ichikawa, Masaya; Ichikawa, Yudai; Kim, S.; Nanamura, Takuya; Sako, Hiroyuki; Tamura, Hirokazu; Yamamoto, Takeshi; et al.
Progress of Theoretical and Experimental Physics (Internet), 2022(12), p.123D01_1 - 123D01_17, 2022/12
Times Cited Count:0 Percentile:0.01(Physics, Multidisciplinary)Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.
Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09
Times Cited Count:5 Percentile:87.42(Nuclear Science & Technology)In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.
Aoki, Takeshi; Shimizu, Atsushi; Iigaki, Kazuhiko; Okita, Shoichiro; Hasegawa, Takeshi; Mizuta, Naoki; Sato, Hiroyuki; Sakaba, Nariaki
JAEA-Review 2022-016, 193 Pages, 2022/08
Aiming to realize a massive, cost-effective and carbon-free hydrogen production technology utilizing a high temperature gas cooled reactor (HTGR), Japan Atomic Energy Agency (JAEA) is planning a HTTR heat application test producing hydrogen with High Temperature Engineering Test Reactor (HTTR) achieved 950C of the highest reactor outlet coolant temperature in the world. In the HTTR heat application test, it is required to establish its safety design realizing highly safe connection of a HTGR and a hydrogen production plant by the Nuclear Regulation Authority to obtain the permission of changes to reactor installation. However, installation of a system connecting the hydrogen production plant and a nuclear reactor, and its safety design has not been conducted so far in conventional nuclear power plant including HTTR in the world. A special committee on the HTTR heat application test, established under the HTGR Research and Development Center, considered a safety design philosophy for the HTTR heat application test based on an authorized safety design of HTTR in terms of conformity to the New Regulatory Requirements taking into account new considerable events as a result of the plant modification and connection of the hydrogen production plant. This report provides materials of the special committee such as technical reports, comments provided from committee members, response from JAEA for the comments and minutes of the committee.
Aoki, Takeshi; Shimizu, Atsushi; Iigaki, Kazuhiko; Okita, Shoichiro; Hasegawa, Takeshi; Mizuta, Naoki; Sato, Hiroyuki; Sakaba, Nariaki
JAEA-Technology 2022-011, 60 Pages, 2022/07
Japan Atomic Energy Agency is planning a High Temperature Engineering Test Reactor (HTTR) heat application test producing hydrogen with the HTTR which achieved the highest reactor outlet coolant temperature of 950C in the world to realize a massive, cost-effective and carbon-free hydrogen production technology utilizing a high temperature gas cooled reactor (HTGR). In the HTTR heat application test, it is required to establish its safety design for coupling a hydrogen production plant to HTGR through the licensing by the Nuclear Regulation Authority (NRA). A draft of a safety design philosophy for the HTTR heat application test facility was considered taking into account postulated events due to the plant modification and coupling of the hydrogen production plant based on the HTTR safety design which was authorized through the safety review of the NRA against New Regulatory Requirements. The safety design philosophy was examined to apply proven conventional chemical plant standards to the hydrogen production plant for ensuring public safety against disasters caused by high pressure gases. This report presents a result of a consideration on safety design philosophies regarding the reasonability and condition to apply the High Pressure Gas Safety Act for the hydrogen production plant, safety classifications, seismic design classification, identification of important safety system.
Hayashida, Takeshi*; Uemura, Yohei*; Kimura, Kenta*; Matsuoka, Satoshi*; Hagihara, Masato; Hirose, Sakyo*; Morioka, Hitoshi*; Hasegawa, Tatsuo*; Kimura, Tsuyoshi*
Physical Review Materials (Internet), 5(12), p.124409_1 - 124409_10, 2021/12
Times Cited Count:17 Percentile:77.72(Materials Science, Multidisciplinary)Kimura, Kenta*; Yagi, Naoki*; Hasegawa, Shunsuke*; Hagihara, Masato; Miyake, Atsushi*; Tokunaga, Masashi*; Cao, H.*; Masuda, Takatsugu*; Kimura, Tsuyoshi*
Inorganic Chemistry, 60(20), p.15078 - 15084, 2021/10
Times Cited Count:1 Percentile:9.96(Chemistry, Inorganic & Nuclear)Miwa, Koji*; Fujita, Manami; Hasegawa, Shoichi; Hosomi, Kenji; Ichikawa, Yudai; Imai, Kenichi*; Nanamura, Takuya; Naruki, Megumi; Sako, Hiroyuki; Sato, Susumu; et al.
Physical Review C, 104(4), p.045204_1 - 045204_20, 2021/10
Times Cited Count:13 Percentile:88.31(Physics, Nuclear)Tamura, Jun; Kondo, Yasuhiro; Yee-Rendon, B.; Meigo, Shinichiro; Maekawa, Fujio; Hasegawa, Kazuo; Kako, Eiji*; Umemori, Kensei*; Sakai, Hiroshi*; Konomi, Taro*
JPS Conference Proceedings (Internet), 33, p.011049_1 - 011049_6, 2021/03
Yoshida, Junya; Akaishi, Takaya; Fujita, Manami; Hasegawa, Shoichi; Hashimoto, Tadashi; Hosomi, Kenji; Ichikawa, Masaya; Ichikawa, Yudai; Imai, Kenichi*; Kim, S.; et al.
JPS Conference Proceedings (Internet), 33, p.011112_1 - 011112_8, 2021/03
Sakao, Tamao*; Fujita, Manami; Hasegawa, Shoichi; Hosomi, Kenji; Ichikawa, Masaya; Ichikawa, Yudai; Imai, Kenichi*; Nanamura, Takuya; Naruki, Megumi; Sako, Hiroyuki; et al.
JPS Conference Proceedings (Internet), 33, p.011133_1 - 011133_6, 2021/03