Update of fire receiver panel (The Waste Safety Testing Facility)

Hatakeyama, Yuichi; Hirai, Koki; Ikegami, Yuta*; Sano, Naruto; Tomita, Takeshi; Usami, Koji; Tagami, Susumu

JAEA-Technology 2024-020, 33 Pages, 2025/03

JAEA-Technology-2024-020.pdf:2.21MB

The Waste Safety Testing Facility (WASTEF) is a facility that began operation in December 1982 with the aim of conducting safety testing research on the long-term storage and subsequent geological disposal of high-level radioactive waste generated by the reprocessing of spent fuel. This facility is composed of five concrete cells, one lead cell, six glove boxes, and seven hoods, and is a large-scale facility capable of using nuclear fuel materials including uranium and plutonium, as well as radioisotopes such as neptunium and americium. The facility is equipped with an automatic fire alarm system for the entire building in accordance with the Fire Service Act and regulations on technical standards for facilities used. This is an important aspect of safety management, and it is required that the equipment be sufficiently sound and reliable. However, after more than 30 years of use since its installation, the fire receiving panel, one of the components of the automatic fire alarm system, has deteriorated significantly. Furthermore, many of the parts used have been discontinued and are no longer available, making it difficult to procure them, making it difficult to maintain the equipment's performance. Therefore, in order to ensure the safe and stable operation of WASTEF, the fire receiving panel was updated. This report summarizes the update of the fire receiving panel among the automatic fire alarm equipment that was implemented in FY2022.

Development of a radioactive substance detection system integrating a Compton camera and a LiDAR camera with a hexapod robot

Sato, Yuki; Kakuto, Takeshi*; Tanaka, Takayuki*; Shimano, Hiroyuki*; Morohashi, Yuko; Hatakeyama, Tomoyoshi*; Nakajima, Junsaku; Ishiyama, Masahiro

Nuclear Instruments and Methods in Physics Research A, 1063, p.169300_1 - 169300_7, 2024/06

https://doi.org/10.1016/j.nima.2024.169300

Fundamental evaluation of hydrogen behavior in sodium for sodium-water reaction detection of sodium-cooled fast reactor

Yamamoto, Tomohiko; Kato, Atsushi; Hayakawa, Masato; Shimoyama, Kazuhito; Ara, Kuniaki; Hatakeyama, Nozomu*; Yamauchi, Kanau*; Eda, Yuhei*; Yui, Masahiro*

Nuclear Engineering and Technology, 56(3), p.893 - 899, 2024/03

https://doi.org/10.1016/j.net.2023.10.043

Structural investigation of borosilicate glasses by using XAFS measurement in soft X-ray region, 3 (Joint research)

Nagai, Takayuki; Okamoto, Yoshihiro; Yamagishi, Hirona*; Shibata, Daisuke*; Kojima, Kazuo*; Hasegawa, Takehiko*; Sato, Seiichi*; Fukaya, Akane*; Hatakeyama, Kiyoshi*

JAEA-Research 2023-004, 45 Pages, 2023/09

JAEA-Research-2023-004.pdf:6.07MB

The local structure of glass-forming elements and waste elements in borosilicate glasses varies with its chemical composition. In this study, simulated waste glass samples were prepared and the chemical state regarding boron (B), silicon (Si) and waste elements of iron (Fe), cesium (Cs) were estimated by using XAFS measurement in soft X-ray region. To understand the chemical stability of simulated waste glasses, XANES spectra of B K-edge, Fe L, L-edge, and Cs M, M-edge were measured on the glass surface exposed to the leachate. As a result, it was found that the glass surface exposed to the leachate was changed and it was difficult to obtain a clear XANES spectrum. From the B K-edge XANES spectra on glass surfaces exposed to the leachate, an increase in three-coordination of B-O (BO) and a decrease in four-coordination of B-O (BO) were observed compared to the glass surfaces before immersion. The XANES spectra of Fe L, L-edge, and Cs M, M-edge show that as the exposure time in the leachate increases, the Cs present on the glass surface dissolves into the leachate. The XANES spectra of Si K-edge were measured on simulated waste glass surfaces before immersion, and it was confirmed that the change in XANES spectra given by NaO concentration had a larger effect than the waste component concentration.

Mg-ion storage materials based on MnO frameworks

Shimokawa, Kohei*; Hatakeyama, Takuya*; Li, H.*; Ichitsubo, Tetsu

Current Opinion in Electrochemistry, 38, p.101209_1 - 101209_8, 2023/04

https://doi.org/10.1016/j.coelec.2023.101209

Historical changes and Correspondence to Research and Test Reactors New Regulatory Standards for Monitoring Post in Oarai Research and Development Institute, JAEA

Hamaguchi, Takumi; Yamada, Junya; Komatsuzaki, Naoya*; Hatakeyama, Takumi; Seya, Natsumi; Muto, Yasunobu; Miyauchi, Hideaki; Hashimoto, Makoto

JAEA-Technology 2022-038, 65 Pages, 2023/03

JAEA-Technology-2022-038.pdf:4.3MB

New regulatory requirements were developed taking into account the lessons-learnt from the accident at Fukushima Daiichi Nuclear Power Station on March 2011. The new regulatory standards required that monitoring posts should be diversified in transmission systems and equipped with backup power supply equipment for design basis accidents. In this report, we look back on the history of monitoring posts in Oarai Research and Development Institute, explained the application for the permission of reactor installment license, application for approval of the design and construction method, pre-use operator's inspection and improvement design of monitoring posts. This report also includes about inspection based on act on special measures concerning nuclear emergency preparedness and the installation of KURAMA-II, which was carried out in conjunction with the improvement of monitoring post for new regulatory standards. As an appendix, application document for approval of the design and construction method are included.

Results of 1-MW operation in J-PARC 3 GeV rapid cycling synchrotron, 2

Yamamoto, Kazami; Yamamoto, Masanobu; Yamazaki, Yoshio; Nomura, Masahiro; Suganuma, Kazuaki; Fujirai, Kosuke; Kamiya, Junichiro; Nakanoya, Takamitsu; Hatakeyama, Shuichiro; Yoshimoto, Masahiro; et al.

Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.277 - 281, 2023/01

https://www.pasj.jp/web_publish/pasj2022/proceedings/PDF/TUP0/TUP004.pdf

The J-PARC 3GeV Rapid Cycling Synchrotron (RCS) is aiming to provide the proton beam of very high power for neutron experiments and the main ring synchrotron. We have continued the beam commissioning and the output power from RCS have been increasing. In recent years, we have been trying continuous supply of 1-MW high-intensity beam, which is the design value, to a neutron target. We tried to operate continuously for over 40 hours in June 2020. However, some trouble occurred and the operation was frequently suspended. In June 2021, we tried again 1-MW operation but it was suspended due to deterioration of the cooling water performance. Last summer shutdown period, we recovered performance of the cooling water system and retried in this June. In the final case, the outside temperature became extremely high. We could not keep 1-MW power, whereas 600 kW beam was delivered in stable.

Reducing the effect of noise generated from stepper motor for H0 collimator in J-PARC RCS

Fujiyama, Hiroki*; Takahashi, Hiroki; Okabe, Kota; Ito, Yuichi*; Hatakeyama, Shuichiro; Suzuki, Takahiro*; Otsu, Satoru*; Yamakawa, Ryuto*

Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.529 - 531, 2023/01

http://www.pasj.jp/web_publish/pasj2022/proceedings/PDF/WEP0/WEP010.pdf

Stepper motors are used for mechanical drive in collimators and wire scanner monitors of J-PARC accelerators. Many of these drive unit hardware have been used since the beginning of J-PARC construction, and it is necessary to take measures against aging deterioration. Therefore, we started updating the motor and control system from around 2017. However, when the stepper motor was updated to the current product in the RCS H0 collimator, a malfunction occurred. This is because the drive unit control system cannot correctly recognize the state of the LS (limit switch) due to the noise generated by the motor driver, which hinders the operation. When the noise generated from the old and new stepper motors was measured in a simple test environment for confirmation, it was found that the current product was clearly larger. As a countermeasure, when the wiring of the stepper motor, which was bundled in a single multi-core cable, was separated into separate cables for the power system and LS signal system, the noise level was reduced to about 1/10 and normal operation was restored. I was able to. In this case, we report on noise countermeasures for the RCS H0 collimator drive unit.

Structural investigation of borosilicate glasses by using XAFS measurement in soft X-ray region, 2 (Joint research)

Nagai, Takayuki; Okamoto, Yoshihiro; Yamagishi, Hirona*; Kojima, Kazuo*; Inose, Takehiko*; Sato, Seiichi*; Hatakeyama, Kiyoshi*

JAEA-Research 2022-008, 37 Pages, 2022/10

JAEA-Research-2022-008.pdf:5.27MB

The local structure of glass-forming elements and waste elements in borosilicate glasses varies with its chemical composition. In this study, borosilicate glass frit and simulated waste glass samples were prepared and the chemical state regarding boron (B), silicon (Si) and waste elements of iron (Fe), cesium (Cs) were estimated by using XAFS measurement in soft X-ray region. Following results were obtained by XAFS measurements of simulated waste glass surfaces after immersion test to investigate the long chemical stability. (1) As the leaching time of glass samples in immersion test passed, the Cs M, M-edge XANES spectra disappeared and the Fe L, L-edge spectra changed. (2) A new compound was formed on the sample surface after the immersion test, and these changes in the surface state were confirmed by Raman spectroscopy. However, it became difficult to obtain a clear B K-edge XANES spectrum by forming a compound on glass surfaces. The Si K-edge XANES spectra of borosilicate glass frits with different NaO content were measured, and following was confirmed. (1) As the NaO concentration increases in borosilicate glass frit, the K-edge peak of Si shifts to the low energy side. (2) The intensity of the Si K-edge peak is maximum when the NaO content in glass frits was about 7wt%.

Magnetism of AlFeGeO with andalusite structure

Kakimoto, Kazuo*; Takada, Saki*; Ota, Hiroto*; Hayaguchi, Yuya*; Hagihara, Masato; Torii, Shuki*; Kamiyama, Takashi*; Mitamura, Hiroyuki*; Tokunaga, Masashi*; Hatakeyama, Atsushi*; et al.

Journal of the Physical Society of Japan, 91(5), p.054704_1 - 054704_7, 2022/05

https://doi.org/10.7566/JPSJ.91.054704