Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Fujita, Natsuko; Miyake, Masayasu; Matsubara, Akihiro*; Ishii, Masahiro*; Watanabe, Takahiro; Jinno, Satoshi; Nishio, Tomohiro*; Ogawa, Yumi; Kimura, Kenji; Shimada, Akiomi; et al.
Dai-35-Kai Tandemu Kasokuki Oyobi Sono Shuhen Gijutsu No Kenkyukai Hokokushu, p.17 - 19, 2024/03
The JAEA-AMS-TONO facility at the Tono Geoscience Center, JAEA has three accelerator mass spectrometers. We report the present status of the JAEA-AMS-TONO.
Nakahara, Masaumi; Watanabe, So; Yuyama, Takahiro*; Ishizaka, Tomohisa*; Yuri, Yosuke*; Ishii, Yasuyuki*; Yamagata, Ryohei*; Yamada, Naoto*; Koka, Masashi*; Kada, Wataru*; et al.
QST-M-47; QST Takasaki Annual Report 2022, P. 64, 2024/03
An extraction chromatography method has been studied to recover minor actinides from high-level liquid waste. For effective elution of minor actinides in an adsorbent, the structures of complexes are attempted to be evaluated with ion beam induced luminescence. In this study, Eu complexes in the adsorbent were irradiated by Ar ion beam, and the ion beam induced luminescence spectra of Eu complexes were measured to evaluate the structures of Eu complexes.
Aoyagi, Kazuhei; Ishii, Eiichi
Environmental Earth Sciences, 83(3), p.98_1 - 98_15, 2024/02
Times Cited Count:0 Percentile:0.02(Environmental Sciences)The long-term geological disposal of high-level radioactive waste relies on predictions of future changes in a disposal facility's hydro-mechanical characteristics to assess potential leakage through fractures in the excavation damaged zone (EDZ) after backfilling the facility. This study evaluated the transmissivity of EDZ fractures using in situ hydraulic tests around the area of a full-scale, experimental, engineered barrier system in the Horonobe Underground Research Laboratory, Hokkaido, Japan. After their installation, the buffer blocks swelled, altering the stresses within the EDZ fractures. The effects of these changing stresses on the fractures' transmissivity were assessed over a period of 4 years. The transmissivity continuously decreased in this period to about 41% of its value measured prior to the swelling. Using the Barton-Bandis normal-stress-dependent fracture-closure model, the decrease in transmissivity is quantitatively attributed to closure of the EDZ fractures, which was caused by the swelling pressure increasing up to 0.88 MPa. Evidence of fracture closure came from seismic tomography surveying, which revealed a slight increase in seismic velocity in the study area with increasing swelling pressure. The results show that EDZ fractures were closed by swelling of the full-scale buffer material. They also demonstrate the applicability of the Barton-Bandis model to preliminary estimation of the long-term transmissivity of EDZ fractures in facilities for the geological disposal of radioactive waste.
Kofu, Maiko; Kawamura, Seiko; Murai, Naoki; Ishii, Rieko*; Hirai, Daigoro*; Arima, Hiroshi*; Funakoshi, Kenichi*
Physical Review Research (Internet), 6(1), p.013006_1 - 013006_9, 2024/01
Nomura, Mikihiro*; Ishii, Katsunori; Sato, Yuya*
Recent Trends in Methanation and Green Hydrogen, p.148 - 157, 2023/10
no abstracts in English
Ishii, Katsunori; Morita, Keisuke; Noguchi, Hiroki; Aoki, Takeshi; Mizuta, Naoki; Hasegawa, Takeshi; Nagatsuka, Kentaro; Nomoto, Yasunobu; Shimizu, Atsushi; Iigaki, Kazuhiko; et al.
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 4 Pages, 2023/09
Nakahara, Masaumi; Watanabe, So; Takeuchi, Masayuki; Yuyama, Takahiro*; Ishizaka, Tomohisa*; Ishii, Yasuyuki*; Yamagata, Ryohei*; Yamada, Naoto*; Koka, Masashi*; Kada, Wataru*; et al.
Nuclear Instruments and Methods in Physics Research B, 542, p.144 - 150, 2023/09
Times Cited Count:1 Percentile:0.02(Instruments & Instrumentation)The structures of Eu complexes in the adsorbents prepared with various extractants were evaluated by ion beam induced luminescence analysis in an extraction chromatography for minor actinides recovery. The luminescence of Eu was measured with a proton beam obtained from the single-ended accelerator and an argon ion beam obtained from the azimuthally varying field cyclotron in Takasaki Ion Accelerators for Advanced Radiation Application in National Institutes for Quantum Science and Technology. In this study, it was confirmed that the spectral shape of Eu complexes in the adsorbents varied depending on the kinds of extractants, and the correlation between the change in the spectra and the structures of Eu complexes was investigated.
Mochizuki, Akihito; Ishii, Eiichi
Applied Geochemistry, 155, p.105737_1 - 105737_15, 2023/08
Times Cited Count:0 Percentile:0.01(Geochemistry & Geophysics)Understanding the difference in groundwater flow between glacial and interglacial periods is crucial for predicting the impact of future climate changes on groundwater movement. This study assesses the difference in groundwater flow between the last glacial period (LGP) and the postglacial period (PGP) in fractured mudstones of the Horonobe area, Japan, by combining the data for stable isotopes (D and O) and Cl concentration of fracture and pore waters with radiocarbon (C) age. The isotopic compositions of fractures and pore waters indicate that groundwater at 28250 m deep in a borehole closest to the recharge area comprises meteoric water, recharged under the same climates as the present. The fracture water has isotopic compositions more similar to meteoric water than the matrix pore water near the fracture. The C age of fracture water suggests meteoric water recharge during the PGP. At greater depths in the borehole and sampling points in other boreholes, the isotopic compositions indicate the mixing of glacial meteoric and altered connate water, with the fracture water having comparable isotopic compositions with the matrix pore water. The recharge timing of meteoric water is inferred to be the LGP or before based on C dating. These results suggest that the meteoric water recharged during the PGP flows at a shallow depth, whereas the meteoric water recharged during the LGP intruded to greater depths. This result is consistent with previous inferences from surface geophysical and geological surveys that the depths of local valleys during the LGP were greater by 50 m than the present ones and enhanced the downward hydraulic gradient. Combining the chemical and isotopic compositions of groundwater with C age helps assess the groundwater flow during the LGP and PGP in fractured rocks.
Ishitsuka, Etsuo; Ho, H. Q.; Kitagawa, Kanta*; Fukuda, Takahito*; Ito, Ryo*; Nemoto, Masaya*; Kusunoki, Hayato*; Nomura, Takuro*; Nagase, Sota*; Hashimoto, Haruki*; et al.
JAEA-Technology 2023-013, 19 Pages, 2023/06
Eight people from five universities participated in the 2022 summer holiday practical training with the theme of "Technical development on HTTR". The participants practiced the feasibility study for nuclear battery, the burn-up analysis of HTTR core, the feasibility study for Cf production, the analysis of behavior on loss of forced cooling test, and the thermal-hydraulic analysis near reactor pressure vessel. In the questionnaire after this training, there were impressions such as that it was useful as a work experience, that some students found it useful for their own research, and that discussion with other university students was a good experience. These impressions suggest that this training was generally evaluated as good.
Ishii, Eiichi
Hydrogeology Journal, 31(4), p.893 - 911, 2023/06
Times Cited Count:0 Percentile:0(Geosciences, Multidisciplinary)Major inflows can occur during tunnel/shaft excavations in faulted/fractured rock masses even if pre-excavation grouted. In such cases, post-excavation grouting may be required for reducing the inflows. However, following the diffusion equation for fluid pressure, inflows can naturally reduce to half to one-tenth within the first several days to several weeks when the flow dimensions of the surrounding rock masses are closed to one, while the inflows hardly reduce when the flow dimensions are as high as three. Thus, if the flow dimensions are closed to one, the natural reductions in inflow may be also effectively available for the countermeasures. Nevertheless, the usability of relationship between changes in inflow and flow dimensions has been poorly verified at actual tunnel/shaft-excavation sites. Actual inflows may be strongly affected by different factors including grouting, degassing, excavation processes, and far-field boundary conditions. The author analyzed changes in inflow at six locations where major inflows occurred during tunnel/shaft excavations in faulted/fractured siliceous rocks and investigated flow dimensions in the rocks by packer tests in boreholes. The results confirmed that the inflows for several days to several weeks immediately after the inflows occurred change consistently with the flow dimensions estimated from the packer tests. Thus, even if major inflows were encountered during excavations, the subsequent changes in inflow are predictable based on the flow dimensions, and the flow dimensions can be estimated by preliminary packer tests or from the changes in inflow at the inflow locations for the first several days.
Kokubu, Yoko; Fujita, Natsuko; Watanabe, Takahiro; Matsubara, Akihiro; Ishizaka, Chika; Miyake, Masayasu*; Nishio, Tomohiro*; Kato, Motohisa*; Ogawa, Yumi*; Ishii, Masahiro*; et al.
Nuclear Instruments and Methods in Physics Research B, 539, p.68 - 72, 2023/06
Times Cited Count:0 Percentile:0.02(Instruments & Instrumentation)The JAEA-AMS-TONO facility at the Tono Geoscience Center, JAEA has an accelerator mass spectrometer (JAEA-AMS-TONO-5MV). The spectrometer enabled us to use a multi-nuclide AMS of carbon-14 (C), beryllium-10, aluminium-26 and iodine-129, and we have recently been proceeding test measurement of chlorine-36. In response to an increase of samples, we installed a state-of-the-art multi-nuclide AMS with a 300 kV Tandetron accelerator in 2020. Recently, we are driving the development of techniques of isobar separation in AMS and of sample preparation. Ion channeling is applied to remove isobaric interference and we are building a prototype AMS based on this technique for downsizing of AMS. The small sample graphitization for C has been attempted using an automated graphitization equipment equipped with an elemental analyzer.
Chen, Y.*; Asano, Shun*; Wang, T.*; Xie, P.*; Kitayama, Shinnosuke*; Ishii, Kenji*; Matsumura, Daiju; Tsuji, Takuya; Taniguchi, Takanori*; Fujita, Masaki*
JPS Conference Proceedings (Internet), 38, p.011050_1 - 011050_6, 2023/05
Ishii, Katsunori; Aoki, Takeshi; Isaka, Kazuyoshi; Noguchi, Hiroki; Shimizu, Atsushi; Sato, Hiroyuki
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
Nomoto, Yasunobu; Mizuta, Naoki; Morita, Keisuke; Aoki, Takeshi; Okita, Shoichiro; Ishii, Katsunori; Kurahayashi, Kaoru; Yasuda, Takanori; Tanaka, Masato; Isaka, Kazuyoshi; et al.
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 7 Pages, 2023/05
Mizuta, Naoki; Morita, Keisuke; Aoki, Takeshi; Okita, Shoichiro; Ishii, Katsunori; Kurahayashi, Kaoru; Yasuda, Takanori; Tanaka, Masato; Isaka, Kazuyoshi; Noguchi, Hiroki; et al.
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 6 Pages, 2023/05
Kato, Masato; Nakamichi, Shinya; Hirooka, Shun; Watanabe, Masashi; Murakami, Tatsutoshi; Ishii, Katsunori
Nihon Genshiryoku Gakkai Wabun Rombunshi (Internet), 22(2), p.51 - 58, 2023/04
Uranium and Plutonium mixed oxide (MOX) pellets used as fast reactor fuels have been produced from several raw materials by mechanical blending method through processes of ball milling, additive blending, granulation, pressing, sintering and so on. It is essential to control the pellet density which is one of the important fuel specifications, but it is difficult to understand relationships among many parameters in the production. Database for MOX production was prepared from production results in Japan, and input data of eighteen types were chosen from production process and made a data set. Machine learning model to predict sintered density of MOX pellet was derived by gradient boosting regressor, and represented the measured sintered density with coefficient of determination of R=0.996
Matsubara, Akihiro*; Fujita, Natsuko; Miyake, Masayasu; Ishii, Masahiro*; Watanabe, Takahiro; Kokubu, Yoko; Nishio, Tomohiro*; Ogawa, Yumi; Jinno, Satoshi; Kimura, Kenji; et al.
JAEA-Conf 2022-002, p.55 - 62, 2023/03
We report the present status of the JAEA-AMS-TONO. Particularly, the destructions of varistors used in the beamline equipment will be presented. The cause of the destruction as well as implementation of the safety measures are mentioned.
Yamamoto, Naoki*; Matsumura, Daiju; Hagihara, Yuto*; Tanaka, Kei*; Hasegawa, Yuta*; Ishii, Kenji*; Tanaka, Hirohisa*
Journal of Power Sources, 557, p.232508_1 - 232508_10, 2023/02
Times Cited Count:2 Percentile:26.88(Chemistry, Physical)Nakahara, Masaumi; Watanabe, So; Ishii, Yasuyuki*; Yamagata, Ryohei*; Yamada, Naoto*; Koka, Masashi*; Yuyama, Takahiro*; Ishizaka, Tomohisa*; Kada, Wataru*; Hagura, Naoto*
QST-M-39; QST Takasaki Annual Report 2021, P. 62, 2023/02
In an extraction chromatography method for minor actinides recovery, analysis for the structure of complex in a silica-based adsorbent has been studied to separate minor actinides efficiently. In this study, Eu was used as simulated material of minor actinides, and silica-based adsorbents containing Eu complex were prepared. The ion beam induced luminescence spectra of Eu complexes in silica-based adsorbents were measured, and the basic data for the structures of Eu complexes were obtained.
Kobayashi, Aine*; Toyama, Takeshi*; Nakamura, Takeshi*; Shobuda, Yoshihiro; Ishii, Koji*; Tomizawa, Masahito*; Takeuchi, Yasunao*; Sato, Yoichi*
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.19 - 23, 2023/01
In the J-PARC main ring, density modulation due to longitudinal beam instability occurs during the debunching process of coasting beams. This leads to the generation of an electron cloud, which in turn causes transverse beam instabilities. The transverse beam instability causes beam loss and the electron cloud is assumed to cause vacuum degradation, both of which hinder the beam intensity enhancement, so it is essential to clarify the causes and countermeasures. In particular, the longitudinal impedance of several hundred MHz has been investigated as relevant, and measures to reduce the impedance of individual devices are underway. The Eddy-current type septum magnet, newly installed this year, was found to have a large impedance by simulation. Therefore, we are investigating a method to reduce the impedance by a flange loaded with SiC radio wave absorber, which can be applied to locations where there is no spatial margin to install a taper. In this report, we will discuss the characterization of SiC to be used in actual devices, impedance simulation reflecting the results of SiC evaluation, and evaluation of the effect of impedance countermeasures by impedance measurement using the wire method, and progress in evaluating the effect on the beam by beam simulation and beam study.