Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kato, Masato; Oki, Takumi; Watanabe, Masashi; Hirooka, Shun; Vauchy, R.; Ozawa, Takayuki; Uwaba, Tomoyuki; Ikusawa, Yoshihisa; Nakamura, Hiroki; Machida, Masahiko
Journal of the American Ceramic Society, 107(5), p.2998 - 3011, 2024/05
Times Cited Count：0 Percentile：0.01(Materials Science, Ceramics)Irisawa, Eriko; Kato, Chiaki
Journal of Nuclear Materials, 591, p.154914_1 - 154914_10, 2024/04
Times Cited Count：0 Percentile：0.08(Materials Science, Multidisciplinary)The amount of corrosion of austenitic stainless-steel R-SUS304ULC was evaluated considering the changes in solution composition and boiling during actual concentration operations. Austenitic stainless-steel R-SUS304ULC is the structural material of the highly radioactive liquid waste concentrator in Japanese spent fuel reprocessing plant, which treats highly corrosive nitric acid solutions during enrichment operations. The study results show that it is necessary to focus on nitric acid concentrations, oxidizing metal ion concentrations, and decompression boiling as factors that accelerate the corrosion rate of stainless steel because of cathodic reaction activation.
Imagawa, Yuya; Toyota, Kodai; Onizawa, Takashi; Kato, Shoichi
JAEA-Testing 2023-004, 76 Pages, 2024/03
JAEA-Testing-2023-004.pdf:2.08MB
This manual describes the methods for conducting material tests in air, argon gas, and sodium, and for organizing the data obtained, as a part of the development of high-temperature structural design technology for fast reactors. This manual reflects the revision of test methods in Japanese Industrial Standards (JIS) to the "FBR Metallic Materials Test Manual, PNC TN241 77-03" published in 1977 and the "FBR Metallic Materials Test Manual (Revised Edition), JNC TN9520 2001-001" published in 2001. Also, it was written with reference to the recommended room temperature / elevated temperature tensile test method by the Japan Society of Mechanical Engineers (JSME) and the test standard for the elevated-temperature low-cycle fatigue test method by the Society of Materials Science, Japan (JSMS), which are the standard for material test methods in the domestic academic society.
Yamaguchi, Masaaki; Suzuki, Yuji*; Kabasawa, Satsuki; Kato, Tomoko
JAEA-Data/Code 2024-001, 21 Pages, 2024/03
JAEA-Data-Code-2024-001.pdf:3.45MB
JAEA-Data-Code-2024-001-appendix(CD-ROM).zip:8.0MB
Model catchments have developed for use in testing various assessment models that can consider specific surface environmental conditions such as topography, riverine systems, and land use in the biosphere assessment of HLW geological disposal. The model catchments consist of the topography and riverine system of the catchment area created using existing tools, as well as land use and population distribution, river discharge, sediment flux data set by algorithms from topographical data. Datasets of three types of model watersheds (Types 1 to 3, watershed area: 730 to 770 km
) with different topographical characteristics have released as raster data that can be handled by geographic information systems (GIS). Since the model catchments were created virtually reflecting as much as possible the main characteristics of Japan's surface environment, they can be used as a test bed for conducting hydraulic/mass transport analysis to set the GBI and compartment model.
Nara, Yoshitaka*; Kashiwaya, Koki*; Oketani, Kazuki*; Fujii, Hirokazu*; Zhao, Y.*; Kato, Masaji*; Aoyagi, Kazuhei; Ozaki, Yusuke; Matsui, Hiroya; Kono, Masanori*
Zairyo, 73(3), p.220 - 225, 2024/03
The fractures in the rock are the main pass of groundwater flow and solute transport. The filling of fine-grained particle, such as clay minerals, was confirmed to decrease the permeability of rock by laboratory experiment. This research aimed to verify the occurrence of the phenomena in the field. The water containing the clay minerals was injected into the rock at the 200m stage of the Mizunami Underground research laboratory. The hydraulic conductivity decreased two order before and after the injection. This result suggested that the decrease of hydraulic conductivity by the filling of fine-grained particle in the fractures occurred in the real field.
mixed oxidesVauchy, R.; Matsumoto, Taku; Hirooka, Shun; Uno, Hiroki*; Tamura, Tetsuya*; Arima, Tatsumi*; Inagaki, Yaohiro*; Idemitsu, Kazuya*; Nakamura, Hiroki; Machida, Masahiko; et al.
Journal of Nuclear Materials, 588, p.154786_1 - 154786_13, 2024/01
Times Cited Count：1 Percentile：68.31(Materials Science, Multidisciplinary)
C in Mod.9Cr-1Mo steel to 1
10
cyclesToyota, Kodai; Imagawa, Yuya; Onizawa, Takashi; Kato, Shoichi; Furuya, Yoshiyuki*
Nihon Kikai Gakkai Rombunshu (Internet), 89(928), p.23-00206_1 - 23-00206_15, 2023/12
In order to design fast reactors, it is necessary to consider high cycle fatigue of structural materials up to 110
cycles; to evaluate high cycle fatigue at 110 cycles, it is necessary to develop a best-fit fatigue curve applicable up to 110 cycles. In this study, high cycle fatigue tests were conducted under strain-controlled conditions and ultrasonic fatigue tests were also conducted to develop a high cycle fatigue evaluation method for Mod.9Cr-1Mo steel, which is a candidate material for fast reactor structural materials. Based on the test results, the best-fit fatigue curves were extended and the applicability of the JSME best-fit fatigue curves up to 110 cycles was verified.
Takasaki, Koji; Yasumune, Takashi; Yamaguchi, Yukako; Hashimoto, Makoto; Maeda, Koji; Kato, Masato
Journal of Nuclear Science and Technology, 60(11), p.1437 - 1446, 2023/11
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)The aerodynamic radioactive median diameter (AMAD) is necessary information to assess the internal exposure. On June 6, 2017, at a plutonium handling facility in Oarai site of Japan Atomic Energy Agency (JAEA), during the inspection work of a storage container that contains nuclear fuel materials, accidental contamination occurred and five workers inhaled radioactive materials including plutonium. Some smear papers and an air sampling filter were measured with the imaging plate, and we conservatively estimated minimum AMADs for two cases, plutonium nitrate and plutonium dioxide. As a result of AMAD estimation, even excluding a giant particle of a smear sample, the minimum AMADs of plutonium nitrate from smear papers were 4.3 - 11.3 
m and those of plutonium dioxide were 5.6 - 14.1 m. Also, the minimum AMAD of plutonium nitrate from an air sampling filter was 3.0 m and that of plutonium dioxide was 3.9 m.
Hirooka, Shun; Horii, Yuta; Sunaoshi, Takeo*; Uno, Hiroki*; Yamada, Tadahisa*; Vauchy, R.; Hayashizaki, Kohei; Nakamichi, Shinya; Murakami, Tatsutoshi; Kato, Masato
Journal of Nuclear Science and Technology, 60(11), p.1313 - 1323, 2023/11
Times Cited Count：3 Percentile：94.27(Nuclear Science & Technology)Additive MOX pellets are fabricated by a conventional dry powder metallurgy method. Nd
O
and SmO are chosen as the additive materials to simulate the corresponding soluble fission products dispersed in MOX. Shrinkage curves of the MOX pellets are obtained by dilatometry, which reveal that the sintering temperature is shifted toward a value higher than that of the respective regular MOX. The additives, however, promote grain growth and densification, which can be explained by the effect of oxidized uranium cations covering to a pentavalent state. Ceramography reveals large agglomerates after sintering, and Electron Probe Micro-Analysis confirms that inhomogeneous elemental distribution, whereas XRD reveals a single face-centered cubic phase. Finally, by grinding and re-sintering the specimens, the cation distribution homogeneity is significantly improved, which can simulate spent nuclear fuels with soluble fission products.
Yoshimune, Wataru*; Higuchi, Yuki*; Kato, Akihiko*; Hibi, Shogo*; Yamaguchi, Satoshi*; Matsumoto, Yoshihiro*; Hayashida, Hirotoshi*; Nozaki, Hiroshi*; Shinohara, Takenao; Kato, Satoru*
ACS Energy Letters (Internet), 8(8), p.3485 - 3487, 2023/08
Times Cited Count：3 Percentile：66.84(Chemistry, Physical)
Sala, G.*; Stone, M. B.*; Hal
sz, G. B.*; Lumsden, M. D.*; Fay, A, F,*; Pajerowski, D. M.*; Kawamura, Seiko; Kaneko, Koji; Mazzone, D. G.*; Simutis, G.*; et al.
Communications Physics (Internet), 6, p.234_1 - 234_7, 2023/08
Times Cited Count：0 Percentile：0(Physics, Multidisciplinary)Abe, Shinichiro; Hashimoto, Masanori*; Liao, W.*; Kato, Takashi*; Asai, Hiroaki*; Shimbo, Kenichi*; Matsuyama, Hideya*; Sato, Tatsuhiko; Kobayashi, Kazutoshi*; Watanabe, Yukinobu*
IEEE Transactions on Nuclear Science, 70(8, Part 1), p.1652 - 1657, 2023/08
Times Cited Count：0 Percentile：0.01(Engineering, Electrical & Electronic)Single event upsets (SEUs) caused by neutrons is a reliability problem for microelectronic devices in the terrestrial environment. Acceleration tests using white neutron beam provide realistic soft error rates (SERs), but only a few facilities can provide white neutron beam in the world. If single-source irradiation applicable to diverse neutron source can be utilized for the evaluation of the SER in the terrestrial environment, it contributes to solve the shortage of beam time. In this study, we investigated the feasibility of the SER estimation in the terrestrial environment by any one of these measured data with the SEU cross sections obtained by PHITS simulation. It was found that the SERs estimated by our proposed method are within a factor of 2.7 of that estimated by the Weibull function. We also investigated the effect of simplification which reduce the computational cost in simulation to the SER estimation.
Umino, Yoshinori; Kato, Keisuke; Tanigawa, Masafumi; Kobayashi, Daisuke; Obu, Tomoyuki; Kimura, Yuichi*; Nemoto, Ryo*; Tajiri, Kazuma*
Nihon Hozen Gakkai Dai-19-Kai Gakujutsu Koenkai Yoshishu, p.33 - 36, 2023/08
In the basic laboratory of the Plutonium Conversion Development Facility in Tokai Reprocessing Plant, tests had been conducted to obtain effective data for manufacturing mixed plutonium and uranium oxide powder by irradiating a mixture of plutonium and uranium solution with microwaves. The test has already been completed, and we are currently dismantling and removing equipment. In this paper, techniques related to equipment renewal, dismantling and removal works inside the glove-box are discussed.
Doda, Norihiro; Kato, Shinya; Hamase, Erina; Kuwagaki, Kazuki; Kikuchi, Norihiro; Ohgama, Kazuya; Yoshimura, Kazuo; Yoshikawa, Ryuji; Yokoyama, Kenji; Uwaba, Tomoyuki; et al.
Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.946 - 959, 2023/08
An innovative design system named ARKADIA is being developed to realize the design of advanced nuclear reactors as safe, economical, and sustainable carbon-free energy sources. This paper focuses on ARKADIA-Design for design studies as a part of ARKADIA and introduces representative verification methods for numerical analysis methods of the core design. ARKADIA-Design performs core performance analysis of sodium-cooled fast reactors using a multiphysics approach that combines neutronics, thermal-hydraulics, core mechanics, and fuel pin behavior analysis codes. To confirm the validity of these analysis codes, validation matrices are identified with reference to experimental data and reliable numerical analysis results. The analysis models in these codes and the representative practices for the validation matrices are described.
Onuki, Toshihiko*; Ye, J.*; Kato, Tomoaki; Liu, J.; Takano, Masahide; Kozai, Naofumi; Utsunomiya, Satoshi*
Environmental Science; Processes & Impacts, 25(7), p.1204 - 1212, 2023/07
Times Cited Count：1 Percentile：0(Chemistry, Analytical)To elucidate chemical forms of Cs and I in microparticles produced via the Fukushima Daiichi Nuclear Power Plant accident and released into the atmosphere, we analyzed Cs and I in condensed vaporized particles (CVP) produced by melting experiments using nuclear fuel components containing CsI with concrete. CVPs consisted of many round particles containing Cs and I of diameters less than several tens of micrometers. Two kinds of particles were present: one containing large amounts of Cs and I, suggesting the presence of CsI, and the other containing small amounts of Cs and I with large Si contents. Most of CsI from both particles were dissolved in water. On the contrary, some fractions of Cs remained from the latter particles. These results suggest that Cs was incorporated in CVPs along with Si to form water low-soluble CVPs
Kokubu, Yoko; Fujita, Natsuko; Watanabe, Takahiro; Matsubara, Akihiro; Ishizaka, Chika; Miyake, Masayasu*; Nishio, Tomohiro*; Kato, Motohisa*; Ogawa, Yumi*; Ishii, Masahiro*; et al.
Nuclear Instruments and Methods in Physics Research B, 539, p.68 - 72, 2023/06
Times Cited Count：0 Percentile：0.02(Instruments & Instrumentation)The JAEA-AMS-TONO facility at the Tono Geoscience Center, JAEA has an accelerator mass spectrometer (JAEA-AMS-TONO-5MV). The spectrometer enabled us to use a multi-nuclide AMS of carbon-14 (
C), beryllium-10, aluminium-26 and iodine-129, and we have recently been proceeding test measurement of chlorine-36. In response to an increase of samples, we installed a state-of-the-art multi-nuclide AMS with a 300 kV Tandetron accelerator in 2020. Recently, we are driving the development of techniques of isobar separation in AMS and of sample preparation. Ion channeling is applied to remove isobaric interference and we are building a prototype AMS based on this technique for downsizing of AMS. The small sample graphitization for C has been attempted using an automated graphitization equipment equipped with an elemental analyzer.
Fe
intermetallic compoundCao, Y.*; Zhou, H.*; Khmelevskyi, S.*; Lin, K.*; Avdeev, M.*; Wang, C.-W.*; Wang, B.*; Hu, F.*; Kato, Kenichi*; Hattori, Takanori; et al.
Chemistry of Materials, 35(8), p.3249 - 3255, 2023/04
Times Cited Count：1 Percentile：45.8(Chemistry, Physical)Hydrostatic and chemical pressure are efficient stimuli to alter the crystal structure and are commonly used for tuning electronic and magnetic properties in materials science. However, chemical pressure is difficult to quantify and a clear correspondence between these two types of pressure is still lacking. Here, we study intermetallic candidates for a permanent magnet with a negative thermal expansion (NTE). Based on in situ synchrotron X-ray diffraction, negative chemical pressure is revealed in HoFe on Al doping and quantitatively evaluated by using temperature and pressure dependence of unit cell volume. A combination of magnetization and neutron diffraction measurements also allowed one to compare the effect of chemical pressure on magnetic ordering with that of hydrostatic pressure. Intriguingly, pressure can be used to control suppression and enhancement of NTE. Electronic structure calculations indicate that pressure affected the top of the majority band with respect to the Fermi level, which has implications for the magnetic stability, which in turn plays a critical role in modulating magnetism and NTE. This work presents a good example of understanding the effect of pressure and utilizing it to control properties of functional materials.
Yokoyama, Sumi*; Hamada, Nobuyuki*; Tsujimura, Norio; Kunugita, Naoki*; Nishida, Kazutaka*; Ezaki, Iwao*; Kato, Masahiro*; Okubo, Hideki*
International Journal of Radiation Biology, 99(4), p.604 - 619, 2023/04
Times Cited Count：2 Percentile：19.1(Biology)In April 2011, the International Commission on Radiological Protection recommended reducing the occupational equivalent dose limit for the lens. Such a new occupational lens dose limit has thus far been implemented in many countries, and there are extensive discussions toward its regulatory implementation in other countries. In Japan, discussions in the Japan Health Physics Society (JHPS) began in April 2013 and in Radiation Council in July 2017, and the new occupational lens dose limit was implemented into regulation in April 2021. To share our experience, we have published a series of papers summarizing situations in Japan: the first paper based on information available by early 2017, and the second paper by early 2019. This paper (our third paper of this series) aims to review updated information available by mid-2022, such as regarding regulatory implementation of the new occupational lens dose limit, recent discussions by relevant ministries based on the opinion from the council, establishment process of safety and health management systems, the JHPS guidelines on lens dose monitoring and radiation safety, voluntary countermeasures of the licensees, development of lens dose calibration method, and recent studies on exposure of the lens in nuclear workers and biological effect on the lens.
Yamashita, Naoki; Irisawa, Eriko; Kato, Chiaki; Sano, Naruto; Tagami, Susumu
JAEA-Technology 2022-035, 29 Pages, 2023/03
JAEA-Technology-2022-035.pdf:2.54MB
In the treatment process of the current commercial reprocessing plant (Rokkasho Reprocessing Plant), the high-level liquid waste concentrator is the equipment that treats the most corrosive solution. In the high-level liquid waste concentrator, the extracted liquid waste after separation of uranium and plutonium is heated, concentrated, and reduced in volume. Therefore, the amount of gamma- rays emitted from fission products and the concentration of corrosive metal ion species such as neptunium-237 (
Np) are the highest in the reprocessing process, and the amount of corrosion in the high-level liquid waste concentrate canner is expected to be large. In this study, in order to clarify the effect of gamma-rays on the corrosion reaction of stainless steel in nitric acid solutions containing Np from the electrochemical viewpoint, the corrosion test apparatus for heat transfer surfaces in an airtight concrete cell at the Waste Safety TEsting Facility (WASTEF) of Nuclear Science Research Institute was modified to enable electrochemical measurements under gamma-ray irradiation. The effect of gamma-rays on the corrosion reaction taking place on the stainless steel surface was discussed from the electrochemical test results obtained. As a result, changes in the immersion potentials of stainless steel and the polarization curves due to chemical species caused by radiolysis of gamma-ray irradiation were confirmed.
Kageyama, Tomio; Denuma, Akio; Koizumi, Jin*; Odakura, Manabu*; Haginoya, Masahiro*; Isaka, Shinichi*; Kadowaki, Hiroyuki*; Kobayashi, Shingo*; Morimoto, Taisei*; Kato, Yoshiaki*; et al.
JAEA-Technology 2022-033, 130 Pages, 2023/03
JAEA-Technology-2022-033.pdf:9.87MB
Uranium handling facility for development of nuclear fuel manufacturing equipment (Mockup room) was constructed in 1972. The Mockup room has a weak seismic resistance and is deteriorating with age. Also, the original purpose with this facility have been achieved and there are no new development plans using this facility. Therefore, interior equipment installed in this facility had been dismantled and removed since March 2019. After that, the Mockup room was inspected for contamination, and then controlled area in the Mockup room was cancelled on March 29th 2022. A total of 6,549 workers (not including security witnesses) were required for this work. The amount of non-radioactive waste generated by this work was 31,300 kg. The amount of radioactive waste generated by this work was 3,734 kg of combustible waste (103 drums), 4,393 kg of flame resistance waste (61 drums), 37,790 kg of non-combustible waste (124 drums, 19 containers). This report describes about the dismantling and removing the interior equipment in the Mockup room, the amount of waste generated by this work, and procedure for cancellation the controlled area in the facility.
