Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ishihara, Keisuke; Yokota, Akira; Kanazawa, Shingo; Iketani, Shotaro; Sudo, Tomoyuki; Myodo, Masato; Irie, Hirobumi; Kato, Mitsugu; Iseda, Hirokatsu; Kishimoto, Katsumi; et al.
JAEA-Technology 2016-024, 108 Pages, 2016/12
JAEA-Technology-2016-024.pdf:29.74MB
Radioactive isotope, nuclear fuel material and radiation generators are utilized in research institutes, universities, hospitals, private enterprises, etc. As a result, various low-level radioactive wastes (hereinafter referred to as non-nuclear radioactive wastes) are produced. Disposal site for non-nuclear radioactive wastes have not been settled yet and those wastes are stored in storage facilities of each operator for a long period. The Advanced Volume Reduction Facilities (AVRF) are built to produce waste packages so that they satisfy requirements for shallow underground disposal. In the AVRF, low-level beta-gamma solid radioactive wastes produced in the Nuclear Science Research Institute are mainly treated. To produce waste packages meeting requirements for disposal safely and efficiently, it is necessary to cut large radioactive wastes into pieces of suitable size and segregate those depending on their types of material. This report summarizes activities of pretreatment to dispose of non-nuclear radioactive wastes in the AVRF.
Higuchi, Hidekazu; Osugi, Takeshi; Nakashio, Nobuyuki; Momma, Toshiyuki; Tohei, Toshio; Ishikawa, Joji; Iseda, Hirokatsu; Mitsuda, Motoyuki; Ishihara, Keisuke; Sudo, Tomoyuki; et al.
JAEA-Technology 2007-038, 189 Pages, 2007/07
JAEA-Technology-2007-038-01.pdf:15.13MBJAEA-Technology-2007-038-02.pdf:38.95MBJAEA-Technology-2007-038-03.pdf:48.42MBJAEA-Technology-2007-038-04.pdf:20.53MBJAEA-Technology-2007-038-05.pdf:10.44MB
The Advanced Volume Reduction Facilities (AVRF) is constructed to manufacture the waste packages of radioactive waste for disposal in the Nuclear Science Research Institute of the Japan Atomic Energy Agency. The AVRF is constituted from two facilities. The one is the Waste Size Reduction and Storage Facility (WSRSF) which is for reducing waste size, sorting into each material and storing the waste package. The other is the Waste Volume Reduction Facility (WVRF) which is for manufacturing the waste package by volume reducing treatment and stabilizing treatment. WVRF has an induction melting furnace, a plasma melting furnace, an incinerator, and a super compactor for treatment. In this report, we summarized about the basic concept of constructing AVRF, the constitution of facilities, the specifications of machineries and the state of trial operation until March of 2006.
Arakawa, Kazuo; Oikawa, Masakazu*; Shimada, Hirofumi*; Kamiya, Tomihiro; Nakano, Takashi*; Yusa, Ken*; Kato, Hiroyuki*; Sato, Takahiro; Agematsu, Takashi; Kashiwagi, Hirotsugu; et al.
Proceedings of 4th Annual Meeting of Particle Accelerator Society of Japan and 32nd Linear Accelerator Meeting in Japan (CD-ROM), p.279 - 281, 2007/00
no abstracts in English
Kashiwagi, Hirotsugu; Oikawa, Masakazu*; Shimada, Hirofumi*; Yuri, Yosuke; Agematsu, Takashi; Ishii, Yasuyuki; Saito, Yuichi; Sakai, Takuro; Okumura, Susumu; Kurashima, Satoshi; et al.
no journal, ,
The areas of age-related macular degeneration, tumor in brain pituitary and vascular lesions such as AVM (Arterio Venous Malformation) to be treated are 1
1 mm, 3030 mm and 33 mm respectively. To treat these by heavy ion beam instead of surgical operation, not only the spatial resolution of the beam should be 100 micrometer to 1 mm, but also the formation of it be pencil-shaped, so that the diameter of beam hardly depends on the depth of it in the target. The pencil beam transport system was studied and designed for carbon microsurgery therapy, as a part of the 21st century COE program. In this study, one of the vertical beam lines of a heavy ion therapy facility to be constructed in Gunma University was a model for beam optics calculations. The parameters of the magnetic components such as bending magnets and quadrupole ones, were optimized to obtain a sub-millimeter beam on the target. The range shifter is inserted in the beam line to form spread out bragg peak. Effect of inserting range shifters were also estimated, especially for growth of beam emittance by scattering in the further calculation. The total layout of this system and the beam optics simulations are explained in detail in the poster session.
Fukuda, Mitsuhiro; Arakawa, Kazuo; Sato, Takahiro; Okumura, Susumu; Saito, Yuichi; Kashiwagi, Hirotsugu; Miyawaki, Nobumasa; Yuri, Yosuke; Ishii, Yasuyuki; Kobayashi, Yasuhiko; et al.
no journal, ,
no abstracts in English
Arakawa, Kazuo; Fukuda, Mitsuhiro*; Shimada, Hirofumi*; Sakai, Takuro; Sato, Takahiro; Oikawa, Masakazu*; Agematsu, Takashi; Kashiwagi, Hirotsugu; Okumura, Susumu; Kurashima, Satoshi; et al.
no journal, ,
no abstracts in English
Kurashima, Satoshi; Kashiwagi, Hirotsugu; Miyawaki, Nobumasa; Okumura, Susumu; Yoshida, Kenichi; Yuri, Yosuke; Yuyama, Takahiro; Ishizaka, Tomohisa; Ishibori, Ikuo; Nara, Takayuki; et al.
no journal, ,
no abstracts in English