DCA炉心実験データ集(15) 25.0cmピッチ格子におけるミクロパラメータの測定
Experimental data in DCA (15) Micro-parameters at 25.0 cm pitch lattice
仁柴 明人*; 皆月 功*; 若林 利男*; 草別 幸夫*; 戸村 和二*
not registered; not registered; not registered; not registered; not registered
プルトニウム燃料を装荷した25.0cmピッチ格子についてミクロ・パラメータの測定を行なった。使用したプルトニウム燃料は天然ウランにスタンダード・グレイド(90%Pu-fissile)のプルトニウムを0.54w/o富化した混合酸化物(5sPu)とリアクター・グレイド(75%Pu―fissile)のプルトニウムを0.87w/o富化した混合酸化物(8RPu)の二種類である。5sPuの格子では0%,30%および100%の三種類の冷却材ボイド率について,8RPuの格子では0%および100%の二種類の冷却材ボイド率について,測定を行なった。さらに重水減速材中に10Bを3.9ppm含んだ,冷却材ボイド率が0%である5sPu格子についても測定を行なった。▲プルトニウム箔,濃縮ウラン箔,天然ウラン箔,または劣化ウラン箔などを裸とカドミ・カバーをして燃料棒内にセットし,照射により箔内に生じたFPの線またはネプツニウム239の線を計数した。これらの箔の比放射能から18,25,49,28,49/25等のミクロパラメータを求めた。
Micro-parameters have been measured in plutonium fuel loaded in 25.0 cm pitch lattice. The fuels used for the measurements were 0.54 w/o PuO (standard grade)-UO[5SPu] and 0.87 w/o PuO (reactor grade)-UO[8RPu]. The "coolants" used in the experiment on 5S Pu fuel lattice were HO [0% void], mixture of HO, DO and H3BO [30% void], and Air [100% void]. In the case 8R Pu fuel, HO and Air were used as the coolants. The measurements were also done on the lattice of 0% void fraction with 3.9 B ppm in DO moderator loaded with 5S Pu fuel to investigate the effect of B in the moderator. The micro-parameters such as , , , and were obtained by the foil activation method in using plutonium-foils, enriched-uranium-foils, natural uranium foils and depleted uranium foils. The micro-parameters measured in the DCA's lattices are shown in the following table.