検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

主IHX交換工事及びその他関連工事に関する放射線管理報告書(技術報告)

Radiation control report on intermediate heat exchanger replacement and related works

叶野 豊; 山中 貴志; 笹嶋 貴光; 高橋 真也*; 干場 英明; 江森 修一; 進藤 勝利

Kano, Yutaka; not registered; not registered; not registered; Hoshiba, Hideaki; not registered; Shindo, Katsutoshi

高速実験炉「常陽」では、平成12年6月から平成15年1月の期間、第13回定期検査が実施されており、平成12年10月末から平成13年11月末にかけて、原子炉建屋原子炉格納容器床下区域(以下「床下区域という)等において、高性能照射炉心(MK-III)移行に伴う原子炉冷却系の改造工事及びその他関連工事等が実施された。原子炉冷却系の改造工事のうち、放射線管理上重要な作業は、主中間熱交換器(以下「主IHX」という)A,B系統及び付帯する冷却系配管一部などの交換工事とその他関連工事として実施したメンテナンス建屋内での1次冷却系配管サーベランス材取出し作業であった。これらの作業場所は、1次冷却系配管が 入り組んだ狭隘な場所で、非常に作業性が悪く、配管や機器内の放射性腐食物(以下「CP」という)による高線量率雰囲気であるため、放射線管理の中心は、外部被ばく線量の管理であった。 主IHX交換工事及びその他関連工事に係る外部被ばく計画線量は、作業種別毎に特殊放射線作業計画等を立て、それぞれの作業内容、作業者数、作業期間と作業場所雰囲気及び機器類表面最大の$$gamma$$線量率などを考慮し算出するとともに、総計画線量については、7135人mSv(管理目標値:5708人mSv(計画値の8割))とした。 また、本工事は、長期間にわたる大規模放射線作業であったことから、その実施にあたっては、作業専任の放射線管理体制を構築し、作業担当課及び請負業者との密接な打合せを適宜実施し、外部・内部被ばく管理、表面汚染管理等について、きめ細かな放射線管理を行うとともに、徹底した外部被ばく低減化対策に努めてきた。これらの結果、外部被ばくに係る総実績線量は、2386人・mSv(計画値:約33%、管理目標値:約42%)であり、個人最大被ばく線量は、職員が24.7mSv、職員外(業者)が21.7mSvであった。また、工事期間中の各作業に伴う$$gamma$$線量率、表面密度、空気中放射性物質濃度等の放射線管理については、一部を除き全て管理目標値以下で管理することが出来た。更に、内部被ばく、身体汚染等の放射線トラブルの発生もなく、主IHX交換工事及びその他関連工事に係る放射線管理を良好かつ無事に完了することが出来た。

The 13th periodical inspection of the experimental fast reactor JOYO is being made from Jun. 2000 to Jan. 2003. While this inspection, from the end of oct. 2000 to Nov. 2001, the MK-III modification work on heat transport system was made in lower region of the reactor containment vessel in the reactor facility (under floor area). In the MK-III modification work, the works important to radiation control were the replacement of intermediate heat exchangers (IHxs) and fixtures, and the picking out of the surveillance material from primary heat transport piping carried out in the maintenance building. Because the working areas of these works were executed in small space around the complicated primary heat transport piping, workability was bad and dose rate from the corrosion products (CP) in piping or fixtures was high. In such condition, radiation control was performed mainly concerned about external exposure. The planned total external exposure of the IHX replacement and related works was 7135 man$$times$$mSv (target of total dose control: less than 5708 man$$times$$mSv, 80% of the plan), derived from special radiation work plans for segmental works, concerned about work procedure, number of workers, period of work, dose rate of working area and surface dose rate of equipments. The special radiation control organization was established for such long and large-scale work. The special organization held detailed discussion about radiation control of this work with the execution section and contractors appropriately, performed carefal external/internal exposure control and surface contamination control and made effects to reduce the external exposure thoroughly. As a result of these action, the total external exposure was 2386 man$$times$$mSv ( $$simeq$$33% of the plan, $$simeq$$42% of the target) and the maximum individual exposure were 24.7 mSv for staffs and 21.7 mSv for contractors. The dose rate, surface contamination and air contamination while the works were ...

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.