Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Aoshima, Atsushi; Ueno, Tsutomu; Shiotsuki, Masao
Proceedings of 16th International Conference on Nuclear Engineering (ICONE-16) (CD-ROM), 9 Pages, 2008/05
In TVF, concentrated high radioactive liquid waste produced in TRP has been vitrified since 1995. Because of very corrosive condition of melting glass, design life of a melter is limited five years and it requires interruption of plant operation and generation of high radioactive solid waste for melter change. To improve this situation, prolongation of melter design life time by increasing corrosion resistance of structural material is required strongly. Effective removal of noble metal from a melter is also required because accumulated noble metal cause shortening lifetime of a melter. So, JAEA tried to develop a melter which equipped with ability of high corrosion resistance and control temperature distribution for noble metal easy drain out. Mechanical removal technology of remained noble metal rich glass also used if necessary. Low temperature glassing technology and advance removal of noble metal from concentrated high radioactive liquid are also be studying.
Aoshima, Atsushi; Ueno, Tsutomu; Shiotsuki, Masao
Proceedings of European Nuclear Conference 2007 (ENC 2007) (CD-ROM), 5 Pages, 2007/09
Tokai Vitrification Facility (TVF) started hot operation in 1996 and produced 241 canisters as of June 2007. Through TVF operation, JAEA had much experience and accumulated much technical know-how which indicated that management for noble metal accumulation in a melter was key technology for smooth plant operation. JAEA should continue service operation based on a vitrification contract with the Japanese utilities because there remains about two third of High Active Liquid Waste (HALW) produced in the reprocessing service operation of Tokai Reprocessing Plant (TRP). TVF melter is designed in condition of five years life time because of very corrosive characteristic of melted glass. Five years design life time is equivalent to 500 canisters production in TVF. Because estimated number of canisters which will be produced in the future is over 500 canisters, exchange of the present melter is necessary. From these situations, JAEA decided basic strategy to increase stability of the existing melter operation and develop an advanced new melter for replacement in future which has largely prolonged life time and high noble metal drain ability. To attain these targets, JAEA extracted necessary key technologies to assemble into a ten years road map and started development. This development has been progressing on schedule.
; ; Kozaka, Tetsuo; ; ; ; ; Terakado, Shigeru; Omori, Takehiko
NO.107 P.77-93, (107), p.77 - 93, 1998/09
None
; ; ; Ishibashi, Takashi;
Dekomisshoningu Giho, (19), p.23 - 50, 1998/00
None
