検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 418 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

A Systematic approach for the adequacy analysis of a set of experimental databases: Application in the framework of the ATRIUM activity

Baccou, J.*; Glantz, T.*; Ghione, A.*; Sargentini, L.*; Fillion, P.*; Damblin, G.*; Sueur, R.*; Iooss, B.*; Fang, J.*; Liu, J.*; et al.

Nuclear Engineering and Design, 421, p.113035_1 - 113035_16, 2024/05

 被引用回数:0

In the Best-Estimate Plus Uncertainty (BEPU) framework, the use of best-estimate code requires to go through a Verification, Validation and Uncertainty Quantification process (VVUQ). The relevance of the experimental data in relation to the physical phenomena of interest in the VVUQ process is crucial. Adequacy analysis of selected experimental databases addresses this problem. The outcomes of the analysis can be used to select a subset of relevant experimental data, to encourage designing new experiments or to drop some experiments from a database because of their substantial lack of adequacy. The development of a specific transparent and reproducible approach to analyze the relevance of experimental data for VVUQ still remains open and is the topic of this contribution. In this paper, the concept of adequacy initially introduced in the OECD/NEA SAPIUM (Systematic APproach for model Input Uncertainty quantification Methodology) activity is formalized. It is defined through two key properties, called representativeness and completeness, that allows considering the multifactorial dimension of the adequacy problem. A new systematic approach is then proposed to analyze the adequacy of a set of experimental databases. It relies on the introduction of two sets of criteria to characterize representativeness and completeness and on the use of multi-criteria decision analysis method to perform the analysis. Finally, the approach is applied in the framework of the new OECD/NEA ATRIUM activity which includes a set of practical IUQ exercises in thermal-hydraulics to test the SAPIUM guideline in determining input uncertainties and forward propagating them on an application case. It allows evaluating the adequacy of eight experimental databases coming from the Super Moby-dick, Sozzi-Sutherland and Marviken experiments and identifying the most adequate ones.

論文

The BCC $$rightarrow$$ FCC hierarchical martensite transformation under dynamic impact in FeMnAlNiTi alloy

Li, C.*; Fang, W.*; Yu, H. Y.*; Peng, T.*; Yao, Z. T.*; Liu, W. G.*; Zhang, X.*; 徐 平光; Yin, F.*

Materials Science & Engineering A, 892, p.146096_1 - 146096_11, 2024/02

 被引用回数:0 パーセンタイル:0.02(Nanoscience & Nanotechnology)

The quasi-static superelastic responses and hierarchical martensite transformation from body-centered cubic (BCC) to face-centered cubic (FCC) under dynamic impact in Fe$$_{42}$$Mn$$_{34}$$Al$$_{15}$$Ni$$_{7.5}$$Ti$$_{1.5}$$ alloys were investigated. Polycrystalline and oligocrystalline alloys were produced through solution heat treatment and cyclic heat treatment processes, respectively. The results show the volume fraction of residual martensite for oligocrystalline alloys is lower, which exhibits better superelastic responses compared with polycrystalline alloys. Dynamic impact tests indicate that, despite the weakening of the grain boundary strengthening effect, the ultimate strength of the oligocrystalline alloys closely matches that of the polycrystalline alloys under dynamic impact. The martensite transformation of the FeMnAlNiTi alloy is characterized as hierarchical under dynamic impact, and increasing strain rates and grain sizes can enhance the BCC $$rightarrow$$ FCC martensite transformation, resulting in higher martensite phase fractions for oligocrystalline alloys. The increase in ultimate strength is attributed to the dynamic Hall-Petch effect introduced by more martensite phase interfaces under dynamic impact.

論文

Chiral Dirac fermion in a collinear antiferromagnet

Zhang, A.*; Deng, K.*; Sheng, J.*; Liu, P.*; Kumar, S.*; 島田 賢也*; Jiang, Z.*; Liu, Z.*; Shen, D.*; Li, J.*; et al.

Chinese Physics Letters, 40(12), p.126101_1 - 126101_8, 2023/12

 被引用回数:2 パーセンタイル:57.37(Physics, Multidisciplinary)

In a Dirac semimetal, the massless Dirac fermion has zero chirality, leading to surface states connected adiabatically to a topologically trivial surface state as well as vanishing anomalous Hall effect. Recently, itis predicted that in the nonrelativistic limit of certain collinear antiferromagnets, there exists a type of chiral "Dirac-like" fermion, whose dispersion manifests four-fold degenerate crossing points formed by spin-degenerate linear bands, with topologically protected Fermi arcs. Here, by combining with neutron diffraction and first-principles calculations, we suggest a multidomain collinear antiferromagnetic configuration, rendering the existence of the Fermi-arc surface states induced by chiral Dirac-like fermions.

論文

Petrophysical properties of representative geological rocks encountered in carbon storage and utilization

Hu, Q.*; Wang, Q. M.*; Zhang, T.*; Zhao, C.*; Iltaf, K. H.*; Liu, S. Q.*; 深津 勇太

Energy Reports (Internet), 9, p.3661 - 3682, 2023/12

 被引用回数:4 パーセンタイル:73.72(Energy & Fuels)

This study evaluates petrophysical properties of representative geological rocks in the context of injectivity, storage space, and caprock integrity for effective utilization and long-term storage of carbon dioxide. A total of 10 geological rocks were selected as representative storage media for consideration as saline aquifers & depleted oil and gas reservoirs, basalts, and cap rocks, as well as utilization in organic-rich shale and coal seams. An integrated suite of laboratory tests, including liquid immersion porosimetry, gas expansion porosimetry, grain size distribution, mercury intrusion porosimetry, and gas diffusion, were performed on these various rock samples. The results exhibit a disparity of petrophysical properties among two broad groups of rocks: rocks selected for possible storage of CO$$_{2}$$ have porosities of $$sim$$10-25%, permeabilities of $$sim$$10$$^{-16}$$-10$$^{-13}$$ m$$^{2}$$, $$mu$$m-sized pore-throat size distribution, and mostly good pore connectivity; in contrast, the potential caprocks have porosities of $$sim$$0.5-5%, permeabilities of $$sim$$10$$^{-20}$$-10$$^{-18}$$ m$$^{2}$$, pore throat sizes of $$<$$50 nm, and probably poorly connected pore networks. An understanding of the measured facets of pore structure and contribution of fractures is also critical in the context of different testing principles and data interpretation of petrophysical analyses, as well as observational scales in the laboratory and field, and therefore reliable confidence of CO$$_{2}$$ storage and utilization performance. Our work further illustrates the controlling influence of grain size distribution and geological processes on pore size distribution and pore connectivity for a wide range of rock types and lithologies, and particularly presents the extent and behavior of CO$$_{2}$$ gas diffusion with a custom-designed apparatus for a holistic understanding of various petrophysical attributes of widely different geological rocks.

論文

Effect of molybdenum release on UO$$_{2}$$/MOX fuel oxidation under severe light water reactor accident conditions

Liu, J.; 三輪 周平; 唐澤 英年; 逢坂 正彦

Nuclear Materials and Energy (Internet), 37, p.101532_1 - 101532_5, 2023/12

 被引用回数:0 パーセンタイル:0.01(Nuclear Science & Technology)

To investigate the Mo release behavior and its influence on the fuel oxidation, the oxidation and evaporation behaviors of Mo powders and their influencing mechanism on the oxygen partial pressure around powders were researched by using a thermogravimetric analysis technique. The results revealed that during Mo oxidation and evaporation, the oxygen partial pressure around powders can be dramatically decreased to ensure the mass balance of oxygen. Under guidance of this finding, the oxygen consumption rate by Mo release and the oxidation rate of nuclear fuel in accident conditions were estimated and compared. It is suggested that Mo release can retard the oxidation progress of fuel.

論文

Level structures of $$^{56,58}$$Ca cast doubt on a doubly magic $$^{60}$$Ca

Chen, S.*; Browne, F.*; Doornenbal, P.*; Lee, J.*; Obertelli, A.*; 角田 佑介*; 大塚 孝治*; 茶園 亮樹*; Hagen, G.*; Holt, J. D.*; et al.

Physics Letters B, 843, p.138025_1 - 138025_7, 2023/08

 被引用回数:1 パーセンタイル:64.66(Astronomy & Astrophysics)

$$^{57,59}$$Scからの1陽子ノックアウト反応を用いて、$$^{56}$$Caと$$^{58}$$Caのガンマ崩壊を観測した。$$^{56}$$Caでは1456(12)keVの$$gamma$$線遷移が、$$^{58}$$Caでは1115(34)keVの遷移が観測された。どちらの遷移も暫定的に$$2^{+}_{1} rightarrow 0^{+}_{gs}$$と割り当てられた。有効核子間相互作用をわずかに修正した広い模型空間での殻模型計算では、$$2^{+}_{1}$$準位エネルギー、2中性子分離エネルギー、反応断面積が実験とよく一致し、N=34閉殻の上に新しい殻が形成されていることを裏付けた。その構成要素である$$0_{f5/2}$$$$0_{g9/2}$$軌道はほぼ縮退しており、これは$$^{60}$$Caが二重魔法核である可能性を排除し、Ca同位体のドリップラインを$$^{70}$$Caあるいはそれ以上にまで広げる可能性がある。

論文

Chemical species of cesium and iodine in condensed vaporized microparticles formed by melting nuclear fuel components with concrete materials

大貫 敏彦*; Ye, J.*; 加藤 友彰; Liu, J.; 高野 公秀; 香西 直文; 宇都宮 聡*

Environmental Science; Processes & Impacts, 25(7), p.1204 - 1212, 2023/07

 被引用回数:1 パーセンタイル:0(Chemistry, Analytical)

福島第一原子力発電所事故により生成し環境に放出された放射性微粒子に含まれるCsとIの化学状態を明らかにするため、CsIとコンクリートを含む核燃料成分を用いた溶融実験により生成した粒子(CVP)に含まれるCsとIを分析した。CVPは直径が数10$$mu$$mより小さい丸い粒子で、CsとIを含んでいた。2種類の粒子が確認された。一つはCsとIを多く含むもので、CsIが含まれていると推定された。他方はSi量が多く、CsとIの量は少なかった。2種類の粒子に含まれるCsIの大部分は水に溶けた。Siを多く含む粒子からは一部のCsが水に溶けずに残った。これらの結果は、後者の粒子ではSiとともにCsが粒子に取り込まれ、Siによってこの粒子の溶解性が低くなったことを示す。

論文

Deformation mechanism of a strong and ductile maraging steel investigated using ${it in situ}$ X-ray synchrotron diffraction

Li, H.*; Liu, Y.*; Zhao, W.*; Liu, B.*; 冨永 亜希; 菖蒲 敬久; Wei, D.*

International Journal of Plasticity, 165, p.103612_1 - 103612_20, 2023/06

 被引用回数:3 パーセンタイル:74.38(Engineering, Mechanical)

コバルトフリーのマルエージング鋼の強度特性を明らかにするために、高エネルギー放射光X線回折法を利用したその場引張試験を行った。マルテンサイト相とオーステナイト相からの回折プロファイルが得られ、それらの強度及び幅が負荷に伴い変化している様子が観察された。回折プロファイルを解析した結果、時効(as-aged)材では、低応力レベルにてマルテンサイトの含有量が緩やかに減少し、高応力レベルでは急激に減少した。一方、熱処理(as-solution)材では、応力の増加とともにオーステナイト相がマルテンサイト相に著しく転移変態している結果が得られた。これらのことがそれぞれの強度特性に起因していることを明らかにした。

論文

Neutron reflectometry analysis of condensed water layer formation at a solid interface of epoxy resins under high humidity

Liu, Y.*; 宮田 登*; 宮崎 司*; 春藤 淳臣*; 川口 大輔*; 田中 敬二*; 青木 裕之

Langmuir, 39(29), p.10154 - 10162, 2023/06

 被引用回数:1 パーセンタイル:45.8(Chemistry, Multidisciplinary)

Water absorbed by epoxy resins from a humid atmosphere considerably influences their structure and properties. Examining the effects of absorbed water on epoxy resins at their interfaces with solid substrates is crucial because of their adhesive applications in various fields. The spatial distribution of absorbed water in epoxy resin thin films under high humidity was investigated in this study by neutron reflectometry. Water molecules were found to accumulate at the SiO$$_{2}$$/epoxy resin interface after exposure at a relative humidity of 85% for 8 h. The formation of an ca.1 nm-thick condensed water layer was observed, and the thickness of this layer varied with curing conditions of epoxy systems. Furthermore, the water accumulation at the interface was noted to be affected by high-temperature and high-humidity environments. The formation of the condensed water layer is presumed to be related to the features of the polymer layer near the interface. The construction of the interface layer of epoxy resin would be affected by the interface constraint effect on the cross-linked polymer chain during the curing reaction. This study provides essential information for understanding the factors influencing the accumulation of water at the interface in epoxy resins. In the practical application, the process of improving the construction of epoxy resin near the interface would be a reasonable solution to resist the water accumulation in the interface.

論文

Pressure engineering of van der Waals compound RhI$$_3$$; Bandgap narrowing, metallization, and remarkable enhancement of photoelectric activity

Fang, Y.*; Kong, L.*; Wang, R.*; Zhang, Z.*; Li, Z.*; Wu, Y.*; Bu, K.*; Liu, X.*; Yan, S.*; 服部 高典; et al.

Materials Today Physics (Internet), 34, p.101083_1 - 101083_7, 2023/05

 被引用回数:1 パーセンタイル:49.29(Materials Science, Multidisciplinary)

層状ファンデルワールスハライドは、外部圧力に対して特に敏感であるため、目的とする性質を持つ構造にチューンすることが可能となる。一方で、圧力に非常に敏感であるという特性は、同時に目的とする機能の実現に有害な相転移や格子歪みを引き起こす可能性があるためその操作は依然として困難である。この研究では、層状RhI$$_3$$結晶が持つ極めて弱い層間結合と高い機能可変性を観察した。5GPaという適度な圧力をかけると圧力誘起相転移が起こり、積層構造に変化が現れた。驚くべきことに、この相転移は、圧力に対してほぼ直線的なバンドギャップ減少という傾向に影響を与えなかった。また、より高い圧力では、1.3eVの赤方偏移というかなり大きな調整幅を伴う金属相が観測された。さらに、RhI$$_3$$のキャリア濃度は30GPaで4桁増加し、光電流は7.8GPaで5桁増加することが確認された。これらの結果は、ファンデルワールスハライドの層状構造という特異な特徴を生かした探索、調整、理解のための新たな機会を創出し、原子レベルの薄さを持つマテリアルバイデザインに基づく将来のデバイスとして有望である。

論文

A Large-scale particle-based simulation of heat and mass transfer behavior in EAGLE ID1 in-pile test

Zhang, T.*; Yao, Y.*; 守田 幸路*; Liu, X.*; Liu, W.*; 今泉 悠也; 神山 健司

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05

The in-pile EAGLE ID1 test was conducted by Japan Atomic Energy Agency to demonstrate the effectiveness of the fuel assembly with an internal duct structure during a core disruptive accident in a sodium-cooled fast reactor. In this study, a new computational fluid dynamics code based on the fully Lagrangian particle method was developed for the purpose of clarifying the failure mechanism of the inner duct wall of FAIDUS. The three-dimensional simulation of the ID1 test was performed to analyze a series of thermal hydraulic behaviors leading up to duct wall failure for a computational domain that included six fuel pins. The simulations reasonably reproduced the heat transfer characteristics observed in the test, showing that the local contact of liquid steel with high thermal conductivity with the duct wall greatly enhances the heat transfer from the nuclear heating fuel to the duct wall. The results support the validity of the conclusions of our analytical study regarding the molten pool-to-duct wall heat transfer mechanism that caused the thermal failure of the duct wall.

論文

Activities of the GIF safety and operation project of sodium-cooled fast reactor systems

山野 秀将; Chenaud, M.-S.*; Tsige-Tamirat, H.*; Sumner, T.*; Lee, J.*; Liu, S.*; Peregudova, O.*

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05

第4世代炉に関する国際フォーラムは、次世代の原子力エネルギーシステムのための研究開発における国際協力を行うための組織である。第4世代ナトリウム冷却高速炉(SFR)の取り決めの中で、SFRの安全と運転(SO)に関するプロジェクトは、安全技術開発と原子炉運転技術開発の分野を取り扱う。SOプロジェクトの目的には、(1)安全アプローチの構築と具体的な安全設備の性能確認を裏付ける解析及び実験、(2)安全評価と施設の認可に使用される計算ツールの開発と検証及びモデルの妥当性確認、(3)運転中のSFRプラントでの経験と試験から広く得られる原子炉運転技術の取得を含む。SOのテーマに含まれるタスクは、以下の3つのワークパッケージ(WP)、すなわち、WP-SO-1「手法,モデル及びコード」、WP-SO-2「実験計画と運転経験」、及びWP-SO-3「革新的な設計と安全システムの研究」に分類される。本論文では、SOプロジェクトにおける最近の活動を報告する。

論文

Work function lowering of LaB$$_{6}$$ by monolayer hexagonal boron nitride coating for improved photo- and thermionic-cathodes

山口 尚登*; 遊佐 龍之介*; Wang, G.*; Pettes, M. T.*; Liu, F.*; 津田 泰孝; 吉越 章隆; 虻川 匡司*; Moody, N. A.*; 小川 修一*

Applied Physics Letters, 122(14), p.141901_1 - 141901_7, 2023/04

 被引用回数:3 パーセンタイル:81.68(Physics, Applied)

単層BMをコートしたLaB$$_{6}$$の仕事関数の低減に関して報告する。hBNでコートされた領域は、非被覆あるいはグラフェンコートされたLaB$$_{6}$$(100)単結晶領域に比べて仕事関数が低下していることが、光電子顕微鏡(PEEM)および熱電子顕微鏡(TEEM)実験から分かった。グラフェンコートに比べてhBNコートされたLaB$$_{6}$$(100)では、非常に大きな仕事関数の低下が起きることが、DFT計算から定性的に分かった。計算に酸化層を考慮すると、計算と実験の間の整合性が改善された。放射光XPSによって、我々のLaB$$_{6}$$表面に酸化層が実在することを確認した。

論文

Pressure-modulated magnetism and negative thermal expansion in the Ho$$_2$$Fe$$_{17}$$ intermetallic compound

Cao, Y.*; Zhou, H.*; Khmelevskyi, S.*; Lin, K.*; Avdeev, M.*; Wang, C.-W.*; Wang, B.*; Hu, F.*; 加藤 健一*; 服部 高典; et al.

Chemistry of Materials, 35(8), p.3249 - 3255, 2023/04

 被引用回数:1 パーセンタイル:45.8(Chemistry, Physical)

静水圧や化学圧力は、結晶構造を変化させる効率的な刺激であり、材料科学において電気的、磁気的特性のチューニングによく利用されている。しかし、化学圧力は定量化が困難であり、これら両者の定量的な対応関係はまだよくわかっていない。本研究では、負の熱膨張(NTE)を持つ永久磁石の候補である金属間化合物を調べた。放射光X線その場観察により、AlをドープしたHo$$_2$$Fe$$_{17}$$に負の化学圧力があることを明らかにし、単位セル体積の温度・圧力依存性を用いそれを定量的に評価した。また、磁化測定と中性子回折測定を組み合わせることで、磁気秩序に対する化学圧力と静水圧の違いを比較した。興味深いことに、圧力はNTEの抑制と増強を制御するために使用することができた。電子状態計算から、圧力がFermiレベル(EF)に対する主要バンドの上部に影響を与えたことを示しており、これは磁気安定性に影響を与え、それが磁気とNTEを調節する上で重要な役割を果たしていることがわかった。本研究は、圧力の影響を理解し、それを利用して機能性材料の特性を制御する良い例を示している。

論文

Measurement of H$$^{0}$$ particles generated by residual gas stripping in the Japan Proton Accelerator Research Complex linac

田村 潤; 二ツ川 健太*; 近藤 恭弘; Liu, Y.*; 宮尾 智章*; 森下 卓俊; 根本 康雄*; 岡部 晃大; 吉本 政弘

Nuclear Instruments and Methods in Physics Research A, 1049, p.168033_1 - 168033_7, 2023/04

 被引用回数:1 パーセンタイル:68.31(Instruments & Instrumentation)

J-PARCリニアックは、ビーム損失が重要な課題となる大強度加速器である。J-PARCリニアックでは、H$$^{-}$$ビームが機能分離型ドリフトチューブリニアック(SDTL)で191MeVまで加速され、その後、環結合構造型加速管(ACS)で400MeVまで加速される。H$$^{-}$$リニアックでは陽子リニアックよりもビーム損失の要因事象が多いため、ビーム損失低減のためにはビーム損失の原因を詳しく調べることが必須である。制御不能なH$$^{0}$$粒子を生成する電子ストリッピング現象は、H$$^{-}$$リニアックに特有なビーム損失要因である。J-PARCリニアックにおけるビーム損失の原因を明らかにするため、SDTLとACSの間のビーム輸送部に新しいビーム診断系を設置した。ここでは、H$$^{0}$$粒子をH$$^{-}$$ビームから分離し、H$$^{0}$$粒子が分布する範囲にグラファイト板を挿入してH$$^{0}$$粒子の強度プロファイルを測定することに成功した。ビームライン真空圧力の違いによるH$$^{0}$$粒子の強度変化を調べることで、SDTLセクションのH$$^{0}$$粒子の半分は、J-PARCリニアックの残留ガスストリッピングによって生成されていることを明らかにした。

論文

Multiple mechanisms in proton-induced nucleon removal at $$sim$$100 MeV/nucleon

Pohl, T.*; Sun, Y. L.*; Obertelli, A.*; Lee, J.*; G$'o$mez-Ramos, M.*; 緒方 一介*; 吉田 数貴; Cai, B. S.*; Yuan, C. X.*; Brown, B. A.*; et al.

Physical Review Letters, 130(17), p.172501_1 - 172501_8, 2023/04

 被引用回数:5 パーセンタイル:93.15(Physics, Multidisciplinary)

大きなフェルミ面非対称性を持つ陽子過剰な$$^{14}$$O原子核からの100MeV/nucleonでの陽子による陽子・中性子除去反応について報告した。この結果は、quasi-freeノックアウト反応、非弾性散乱、核子移行反応を含む複数の反応機構の定量的寄与を初めて示すものである。このようなエネルギー領域では通常無視される非弾性散乱と核子移行の寄与が、弱束縛陽子と強束縛中性子の除去反応断面積にそれぞれ約50%と30%寄与していることが示された。

論文

The Experimental and simulation results of LIVE-J2 test; Investigation on heat transfer in a solid-liquid mixture pool

間所 寛; 山下 拓哉; Gaus-Liu, X.*; Cron, T.*; Fluhrer, B.*; 佐藤 一憲; 溝上 伸也*

Nuclear Technology, 209(2), p.144 - 168, 2023/02

 被引用回数:0 パーセンタイル:0.01(Nuclear Science & Technology)

Since the reactor pressure vessel (RPV) lower head failure determines the subsequent ex-vessel accident progression, it is a key issue to understand the accident progression of Fukushima Daiichi Nuclear Power Station (1F). The RPV failure is largely affected by thermal loads on the vessel wall and thus it is inevitable to understand thermal behavior of molten metallic pool with co- existence of solid oxide fuel debris. In the past decades, numerous experiments have been conducted to investigate a homogeneous molten pool behavior. Few experiments, however, addresses the melting and heat transfer process of debris bed consisted of materials with different melting temperatures. LIVE-J2 experiment aimed to provide the experimental data on a solid-liquid mixture pool in a simulated RPV lower head under various conditions. The extensive measurements of the melt temperature indicate the heat transfer regimes in a solid-liquid mixture pool. The test results showed that the conductive heat transfer was dominant during the steady state along the vessel wall boundary and that convective heat transfer takes place inside the mixture pool. Besides the experimental performance, the test case was numerically simulated by using ANSYS Fluent. The simulation results generally agree with the measured experimental data. The flow regime and transient melt evolution were able to be estimated by the calculated velocity field and the crust thickness, respectively.

論文

Hybridized propagation of spin waves and surface acoustic waves in a multiferroic-ferromagnetic heterostructure

Chen, J.*; 山本 慧; Zhang, J.*; Ma, J.*; Wang, H.*; Sun, Y.*; Chen, M.*; Ma, J.*; Liu, S.*; Gao, P.*; et al.

Physical Review Applied (Internet), 19(2), p.024046_1 - 024046_9, 2023/02

 被引用回数:6 パーセンタイル:87.72(Physics, Applied)

Coherent coupling in magnon based hybrid system has many potential applications in quantum information processing. Magnons can propagate in magnetically ordered materials without any motion of electrons, offering a unique method to build low-power-consumption devices and information channels free of heat dissipation. In this article, we demonstrate the coherent propagation of hybridized modes between spin waves and Love surface acoustic waves in a multiferroic BiFeO$$_{3}$$ and ferromagnetic La$$_{0.67}$$Sr$$_{0.33}$$MnO$$_{3}$$ based heterostructure. The magneto-elastic coupling enables a giant enhancement of strength of the hybridized mode by a factor of 26 compared to that of the pure spin waves. A short wavelength down to 250 nm is demonstrated for the hybridized mode, which is desirable for nanoscale acousto-magnonic applications. Our combined experimental and theoretical analyses represent an important step towards the coherent control in hybrid magnonics, which may inspire the study of magnon-phonon hybrid systems for coherent information processing and manipulation.

論文

Study of the $$N=32$$ and $$N=34$$ shell gap for Ti and V by the first high-precision multireflection time-of-flight mass measurements at BigRIPS-SLOWRI

飯村 俊*; Rosenbusch, M.*; 高峰 愛子*; 角田 佑介*; 和田 道治*; Chen, S.*; Hou, D. S.*; Xian, W.*; 石山 博恒*; Yan, S.*; et al.

Physical Review Letters, 130(1), p.012501_1 - 012501_6, 2023/01

 被引用回数:6 パーセンタイル:93.15(Physics, Multidisciplinary)

The atomic masses of $$^{55}$$Sc, $$^{56,58}$$Ti, and $$^{56-59}$$V have been determined using the high-precision multireflection time-of-flight technique. The radioisotopes have been produced at RIKEN's Radioactive Isotope Beam Factory (RIBF) and delivered to the novel designed gas cell and multireflection system, which has been recently commissioned downstream of the ZeroDegree spectrometer following the BigRIPS separator. For $$^{56,58}$$Ti and $$^{56-59}$$V, the mass uncertainties have been reduced down to the order of 10 keV, shedding new light on the $$N=34$$ shell effect in Ti and V isotopes by the first high-precision mass measurements of the critical species $$^{58}$$Ti and $$^{59}$$V. With the new precision achieved, we reveal the nonexistence of the $$N=34$$ empirical two-neutron shell gaps for Ti and V, and the enhanced energy gap above the occupied $$nu$$p$$_{3/2}$$ orbit is identified as a feature unique to Ca. We perform new Monte Carlo shell model calculations including the $$nu$$d$$_{5/2}$$ and $$nu$$g$$_{9/2}$$ orbits and compare the results with conventional shell model calculations, which exclude the $$nu$$g$$_{9/2}$$ and the $$nu$$d$$_{5/2}$$ orbits. The comparison indicates that the shell gap reduction in Ti is related to a partial occupation of the higher orbitals for the outer two valence neutrons at $$N = 34$$.

論文

A 3D particle-based simulation of heat and mass transfer behavior in the EAGLE ID1 in-pile test

Zhang, T.*; 守田 幸路*; Liu, X.*; Liu, W.*; 神山 健司

Annals of Nuclear Energy, 179, p.109389_1 - 109389_10, 2022/12

 被引用回数:1 パーセンタイル:29.26(Nuclear Science & Technology)

The ID1 test was the final target test of the EAGLE experimental framework program. It was used to verify that during a core disruptive accident, the molten fuel could be discharged via wall failure of an inner duct in FAIDUS, a design concept for the sodium-cooled fast reactor. The ID1 results revealed that the wall failure behavior owed to the large heat flow from the surrounding fuel/steel mixture. The present study numerically investigated the heat transfer mechanisms in the test using the finite volume particle method in the three-dimensional domain. The thermal hydraulic behaviors during wall failure were reproduced reasonably. The present three-dimensional simulation mitigated inherent defects of our previous two-dimensional calculation and clarified that the solid fuel and liquid steel close to the outer surface of the duct can expose the duct to high thermal loads, resulting in the wall failure.

418 件中 1件目~20件目を表示