検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 134 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Neutron scattering study of antiferromagnet U$$_{2}$$Pt$$_{6}$$Al$$_{15}$$

太田 玖吾*; 松本 裕司*; 渡部 悠貴*; 金子 耕士; 田端 千紘; 芳賀 芳範

New Physics; Sae Mulli, 73(12), p.1170 - 1173, 2023/12

ハニカム格子を持つ反強磁性体U$$_{2}$$Pt$$_{6}$$Al$$_{15}$$の磁気構造を決定するために中性子散乱実験を行った。U$$_{2}$$Pt$$_{6}$$Al$$_{15}$$$$T_{rm m1}$$=9Kと$$T_{rm m2}$$=26Kで二つの相転移を示す。$$T_{rm m1}$$ $$<$$ $$T$$ $$<$$ $$T_{rm m2}$$の第一相では、$$kappa$$$$_{rm I}$$=(1/3, 0, 0)の伝搬ベクトルで記述される磁気反射が観測された。$$T$$$$<$$$$T_{rm m1}$$のフェーズIIでは、$$kappa$$$$_{rm I}$$=(1/3, 0, 0)と$$kappa$$$$_{rm II}$$=(1/2, 0, 0)の磁気反射が観測され、$$kappa$$$$_{rm I}$$=(1/3, 0, 0)の磁気反射強度は弱いが有限であった。温度依存強度のヒステリシスは$$T_{rm m1}$$での相転移にまたがって観測され、$$T_{rm m1}$$での転移が1次転移であることを示唆している。

報告書

プルトニウム燃料第二開発室の廃止措置状況; GB No.W-9、F-1及び内装設備の解体

永井 佑哉; 周治 愛之; 川崎 猛; 會田 貴洋; 木村 泰久; 根本 靖範*; 小沼 武司*; 冨山 昇*; 平野 耕司*; 薄井 康弘*; et al.

JAEA-Technology 2022-039, 117 Pages, 2023/06

JAEA-Technology-2022-039.pdf:11.96MB

日本原子力研究開発機構は多くの原子力施設を保有しているが、その多くで老朽化・高経年化への対応、東日本大震災及び福島第一原子力発電所の事故を受けた耐震化や新規制基準への対応が求められ、多額の予算を要する状況である。このため、役割を終えた原子力施設についても根本的なリスク低減及び維持管理費用の削減のために施設の廃止措置を進めることが望ましいが、廃止措置及び発生する放射性廃棄物の処理処分に必要な施設の整備・維持管理にも多額の費用が必要となる。この状況を踏まえ、原子力機構では(1)継続利用する施設を絞り込む「施設の集約化・重点化」、(2)新規制基準・耐震化対応、高経年化対策、リスク低減対策等の「施設の安全確保」及び(3)廃止措置、廃棄物の処理処分といった「バックエンド対策」を3つの柱とした「施設中長期計画」を策定した。本計画において、プルトニウム燃料第二開発室は廃止施設として位置付けられており、施設内に設置された設備の解体撤去を進めている。今回の解体撤去対象は、焙焼還元炉、ペレット粉砕設備、これらを包蔵するグローブボックスNo.W-9及びW-9と隣々接の工程室内に設置されているグローブボックスNo.D-1とを連結するトンネル形状のグローブボックスNo.F-1の一部であり、許認可等による約4年の作業中断期間を含めて平成26年2月から令和2年2月の約6年間をかけて作業を実施した。本報告書では、本解体撤去における作業実績、解体撤去を通して得られた知見をまとめたものである

論文

Materials science and fuel technologies of uranium and plutonium mixed oxide

加藤 正人; 町田 昌彦; 廣岡 瞬; 中道 晋哉; 生澤 佳久; 中村 博樹; 小林 恵太; 小澤 隆之; 前田 宏治; 佐々木 新治; et al.

Materials Science and Fuel Technologies of Uranium and Plutonium mixed Oxide, 171 Pages, 2022/10

プルトニウム燃料を使用した革新的で先進的な原子炉が各国で開発されている。新しい核燃料を開発するためには、照射試験が不可欠であり、核燃料の性能と安全性を実証する必要がある。照射試験を補完する技術として、照射挙動を正確にシミュレートする技術を開発できれば、核燃料の研究開発にかかるコスト,時間,労力を大幅に削減でき、核燃料の照射挙動をシミュレーションすることで、安全性と信頼性を大幅に向上させることができる。核燃料の性能を評価するためには、高温での燃料の物理的および化学的性質を知る必要がある。そして、照射中に発生するさまざまな現象を記述した行動モデルの開発が不可欠である。以前の研究開発では、モデル開発の多くの部分で、フィッティングパラメータを使用した経験的手法が使用されてきた。経験的手法では、データがない領域では非常に異なる結果が得られる可能性がある。したがって、この研究では、燃料の基本的な特性を組成と温度に外挿できる科学的記述モデルを構築し、モデルが適用される照射挙動分析コードの開発を行った。

論文

Comparisons between passive RCCSs on degree of passive safety features against accidental conditions and methodology to determine structural thickness of scaled-down heat removal test facilities

高松 邦吉; 松元 達也*; Liu, W.*; 守田 幸路*

Annals of Nuclear Energy, 162, p.108512_1 - 108512_10, 2021/11

 被引用回数:0 パーセンタイル:0.01(Nuclear Science & Technology)

受動的安全性を持つRCCSは、大気を冷却材として使用するため、冷却材を喪失することはないが、大気の擾乱の影響を受けやすいという欠点がある。大気放射を利用したRCCSと、大気自然循環を利用したRCCSを実用化するためには、想定される自然災害や事故状態を含むあらゆる状況下で、常に原子炉からの発熱を除去できるのか、安全性を評価する必要がある。本研究では、2種類の受動的RCCSについて、熱除去のための受動的安全性の大きさを同一条件で比較した。次に、自然災害により自然対流による平均熱伝達率が上昇するなどの偶発的な条件をSTAR-CCM+でシミュレーションし、除熱量の制御方法を検討した。その結果、受動的安全性に優れ、伝熱面の除熱量を制御できる、大気放射を利用したRCCSが優れていることを明示できた。最後に、自然対流と輻射を再現するためにスケールダウンした除熱試験装置の肉厚(板厚)を決定する方法を見出し、加圧室及び減圧室を用いた実験方法も提案した。

論文

Thermally altered subsurface material of asteroid (162173) Ryugu

北里 宏平*; Milliken, R. E.*; 岩田 隆浩*; 安部 正真*; 大竹 真紀子*; 松浦 周二*; 高木 靖彦*; 中村 智樹*; 廣井 孝弘*; 松岡 萌*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

 被引用回数:43 パーセンタイル:96.93(Astronomy & Astrophysics)

2019年4月「はやぶさ2」ミッションは、地球に近い炭素質の小惑星(162173)リュウグウの人工衝撃実験を成功させた。これは露出した地下物質を調査し、放射加熱の潜在的な影響をテストする機会を提供した。はやぶさ2の近赤外線分光器(NIRS3)によるリュウグウの地下物質の観測結果を報告する。発掘された材料の反射スペクトルは、表面で観測されたものと比較して、わずかに強くピークがシフトした水酸基(OH)の吸収を示す。これは、宇宙風化や放射加熱が最上部の表面で微妙なスペクトル変化を引き起こしたことを示している。ただし、このOH吸収の強度と形状は、表面と同様に、地下物質が300$$^{circ}$$Cを超える加熱を経験したことを示している。一方、熱物理モデリングでは、軌道長半径が0.344AUに減少しても、推定される掘削深度1mでは放射加熱によって温度が200$$^{circ}$$Cを超えて上昇しないことが示されている。これは、リュウグウ母天体が放射加熱と衝撃加熱のいずれか、もしくは両方により熱変化が発生したという仮説を裏付けている。

論文

Comparison between passive reactor cavity cooling systems based on atmospheric radiation and atmospheric natural circulation

高松 邦吉; 松元 達也*; Liu, W.*; 守田 幸路*

Annals of Nuclear Energy, 151, p.107867_1 - 107867_11, 2021/02

 被引用回数:1 パーセンタイル:16.35(Nuclear Science & Technology)

受動的安全性を備えた新しい炉容器冷却システム(RCCS)を提案する。RCCSは連続した2つの閉じた領域から構成される。1つは原子炉圧力容器(RPV)を囲む領域、もう1つは大気と熱交換をする冷却領域である。新しいRCCSはRPVから発生した熱を輻射や自然対流によって除去する。最終的なヒートシンクは大気であるため、電気的または機械的に駆動する機器は不要である。RCCSの特徴を理解するために、受動的安全性および除熱量の制御方法について、大気放射を用いたRCCSと大気の自然循環を用いたRCCSを比較した。受動的安全性の大小関係は、熱伝導$$>$$輻射$$>$$自然対流の順である。よって、前者のRCCSは後者のRCCSより、受動的安全性が高いことがわかった。また、除熱量を制御する方法については、前者のRCCSは伝熱面積を変えるだけである一方、後者のRCCSは煙突効果を変える必要がある。つまり、ダクト内の空気抵抗を変える必要がある。よって、前者のRCCSは後者のRCCSより、簡単に除熱量を制御できることがわかった。

論文

Numerical simulation of the solid particle sedimentation and bed formation behaviors using a hybrid method

Sheikh, M. A. R.*; Liu, X.*; 松元 達也*; 守田 幸路*; Guo, L.*; 鈴木 徹*; 神山 健司

Energies (Internet), 13(19), p.5018_1 - 5018_15, 2020/10

 被引用回数:7 パーセンタイル:22.89(Energy & Fuels)

In the safety analysis of sodium-cooled fast reactors, numerical simulations of various thermal-hydraulic phenomena with multicomponent and multiphase flows in core disruptive accidents (CDAs) are regarded as particularly difficult. In the material relocation phase of CDAs, core debris settle down on a core support structure and/or an in-vessel retention device and form a debris bed. The bed's shape is crucial for the subsequent relocation of the molten core and heat removal capability as well as re-criticality. In this study, a hybrid numerical simulation method, coupling the multi-fluid model of the three-dimensional fast reactor safety analysis code SIMMER-IV with the discrete element method (DEM), was applied to analyze the sedimentation and bed formation behaviors of core debris. Three-dimensional simulations were performed and compared with results obtained in a series of particle sedimentation experiments. The present simulation predicts the sedimentation behavior of mixed particles with different properties as well as homogeneous particles. The simulation results on bed shapes and particle distribution in the bed agree well with experimental measurements. They demonstrate the practicality of the present hybrid method to solid particle sedimentation and bed formation behaviors of mixed as well as homogeneous particles.

論文

Heavy fermion state of YbNi$$_2$$Si$$_3$$ without local inversion symmetry

中村 翔太*; 兵頭 一志*; 松本 裕司*; 芳賀 芳範; 佐藤 仁*; 上田 茂典*; 三村 功次郎*; 斉木 克祥*; 磯 孝斉*; 山下 穣*; et al.

Journal of the Physical Society of Japan, 89(2), p.024705_1 - 024705_5, 2020/02

 被引用回数:2 パーセンタイル:22.16(Physics, Multidisciplinary)

We have succeeded in growing a new heavy fermion compound YbNi$$_2$$Si$$_3$$ by the flux method. From electrical resistivity, magnetization, specific heat, magnetic torque and X-ray photoemission measurements concluded that this compound is a heavy fermion compound exhibiting an antiferromagnetic order at 0.35 K.

論文

Comparative methodology between actual RCCS and downscaled heat-removal test facility

高松 邦吉; 松元 達也*; Liu, W.*; 守田 幸路*

Annals of Nuclear Energy, 133, p.830 - 836, 2019/11

 被引用回数:2 パーセンタイル:21.58(Nuclear Science & Technology)

輻射及び自然対流による受動的安全性を持つ革新的な原子炉圧力容器冷却設備(RCCS)を提案した。このRCCSは、連続した2つの閉空間(RPV周囲にある圧力容器室、大気と熱交換を行う冷却室)から構成される。また、RPVからの放出熱を、できるだけ輻射を用いて効率的に除去するため、今までに無い新しい形状を採用している。さらに、崩壊熱除去を行う際、作動流体及び最終ヒートシンクとして空気を用いることで、それらを失う可能性が大幅に低減される。そこで、本冷却設備の優れた除熱性能を示すために、等倍縮小した除熱試験装置を製作し、実験を開始した。本研究では、実機のRCCSと等倍縮小した除熱試験装置を比較する方法を提案する。

論文

The Surface composition of asteroid 162173 Ryugu from Hayabusa2 near-infrared spectroscopy

北里 宏平*; Milliken, R. E.*; 岩田 隆浩*; 安部 正真*; 大竹 真紀子*; 松浦 周二*; 荒井 武彦*; 仲内 悠祐*; 中村 智樹*; 松岡 萌*; et al.

Science, 364(6437), p.272 - 275, 2019/04

 被引用回数:259 パーセンタイル:99.73(Multidisciplinary Sciences)

小惑星探査機はやぶさ2のターゲット天体であるリュウグウは、始原的な炭素質物質で構成されていると考えられている。はやぶさ2に搭載された近赤外分光計(NIRS3)によって、天体の表面組成を得た。天体全体の観測で、弱く細い吸収が2.72ミクロンに確認され、OHを含む鉱物の存在を示している。弱いOH吸収と低いアルベドは熱やショックによって変質を受けた炭素質コンドライトに似ている。OHバンドの位置はほとんど一定であり、衝撃片の集合によって形成されたリュウグウは組成的に均質であることを示している。

論文

Improvement of heat-removal capability using heat conduction on a novel reactor cavity cooling system (RCCS) design with passive safety features through radiation and natural convection

高松 邦吉; 松元 達也*; Liu, W.*; 守田 幸路*

Annals of Nuclear Energy, 122, p.201 - 206, 2018/12

 被引用回数:3 パーセンタイル:30.05(Nuclear Science & Technology)

輻射及び自然対流による受動的安全性を持つ革新的な原子炉圧力容器冷却設備(RCCS)を提案した。このRCCSは、連続した2つの閉空間(RPV周囲にある圧力容器室、大気と熱交換を行う冷却室)から構成される。また、RPVからの放出熱を、できるだけ輻射を用いて効率的に除去するため、今までに無い新しい形状を採用している。さらに、作動流体及び最終ヒートシンクとして空気を用いることで、崩壊熱除去を行う際、それら作動流体及びヒートシンクを失う可能性が大幅に低減される。本研究では、熱伝導を利用したRCCSの除熱能力の向上を目指した結果、除熱できる熱流束が2倍となり、RCCSの高さを半分に、または熱出力を2倍にすることが可能となった。

論文

Experimental study on heat removal performance of a new Reactor Cavity Cooling System (RCCS)

細見 成祐*; 明石 知泰*; 松元 達也*; Liu, W.*; 守田 幸路*; 高松 邦吉

Proceedings of 11th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-11) (Internet), 7 Pages, 2018/11

受動的安全性を備えた新しい炉容器冷却システム(RCCS)を提案する。RCCSは連続した2つの閉じた領域から構成される。1つは原子炉圧力容器(RPV)を囲む領域、もう1つは大気と熱交換をする冷却領域である。新しいRCCSはRPVから発生した熱を輻射や自然対流によって除去する。最終的なヒートシンクは大気であるため、電気的または機械的に駆動する機器は不要である。RCCSの性能を理解するためにスケールモデルを使用して実験を開始した。ヒーター壁と冷却壁に異なる放射率を設定し、3つの実験を実施した。ヒーターから放出された総熱出力および壁面温度分布に関するデータが得られた。モンテカルロ法を使ってヒーターから放出された総熱出力に対する放射の寄与を評価した。ヒーター壁を黒く塗った場合、総熱出力に対する放射の寄与は約60%まで増加できた。つまり、実機においてRPVの壁面の放射率を高くすることは有効である。同時に、冷却領域の壁面の放射率も高くすれば、大気への放射を増加できるだけでなく、RCCS内の対流熱伝達も促進できることがわかった。

論文

Validation of three-dimensional finite-volume-particle method for simulation of liquid-liquid mixing flow behavior

加藤 正嗣*; 船越 寛司*; Liu, X.*; 松元 達也*; Liu, W.*; 守田 幸路*; 神山 健司

Proceedings of 11th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-11) (Internet), 7 Pages, 2018/11

Computational fluid dynamics based on particle-based simulations with a fully Lagrangian approach is a powerful tool to understand thermal-hydraulic behaviors of multi-component, multi-phase flows involved in disrupted nuclear core during severe accidents. In this study, a validation study of 3D particle-based simulation using the finite volume particle method was performed for mixing flow behavior of two liquid phases with different densities in a pool. Fundamental experiments using water and silicon oil were also carried out for the present validation. An enhanced multi-phase scheme was introduced to provide accurate and stable calculations of multi-phase flows characterized by high density ratios. The simulation results of the experiments were given to demonstrate validity of the present simulation method and enhanced performance for simulations of mixing and separation behaviors of liquid-liquid two-phase flows in the pool.

論文

Sedimentation behavior of mixed solid particles

Sheikh, Md. A. R.*; Son, E.*; 神山 基紀*; 森岡 徹*; 松元 達也*; 守田 幸路*; 松場 賢一; 神山 健司; 鈴木 徹*

Journal of Nuclear Science and Technology, 55(6), p.623 - 633, 2018/06

 被引用回数:14 パーセンタイル:79.66(Nuclear Science & Technology)

高速炉の炉心損傷事故時に形成される燃料デブリの堆積高さは、燃料デブリの冷却性及び臨界特性に影響する重要な要因の一つである。本研究では、燃料デブリの堆積挙動に関する実験データベースを構築するため、燃料デブリを模擬した特性(粒子径,密度,球形度等)の異なる固体粒子(アルミナ,スティール)の混合粒子を水プール中へ落下・堆積させる実験を行い、粒子ベッドの堆積高さを測定するとともに、均質粒子及び混合粒子から成るデブリベッドの堆積高さを予測する実験相関式を構築した。構築した実験相関式は粒子ベッドの堆積高さの測定結果と良く一致することを確認した。

論文

Experimental study on debris bed characteristics for the sedimentation behavior of solid particles used as simulant debris

Shamsuzzaman, M.*; 堀江 達郎*; 浮池 亮太*; 神山 基紀*; 森岡 徹*; 松元 達也*; 守田 幸路*; 田上 浩孝; 鈴木 徹*; 飛田 吉春

Annals of Nuclear Energy, 111, p.474 - 486, 2018/01

 被引用回数:17 パーセンタイル:85.18(Nuclear Science & Technology)

Particle bed characteristics are experimentally investigated for the sedimentation and subsequent bed formation of solid particles, related to the coolability aspects in core-disruptive accidents. Presently a series of experiments with gravity driven discharge of solid particles into a quiescent water pool was performed to evaluate bed formation characteristic in the course of particle sedimentation. We evaluated the effects of the crucial factors: nozzle diameter, particle density, particle diameter and nozzle height on four key quantitative parameters of bed shape: mound dimple area, mound dimple volume, repose angle and mound height to illustrate the role of the crucial factors on forming the particle bed shape. The investigated crucial factors exhibit a significant role that diversifies the particle bed formation process. Based on the data obtained in the experimental observations, we developed an empirical correlation to compare the predicted results with the experimental bed heights. The proposed empirical correlation can reasonably demonstrate the general trend of the experimental bed height. This correlation could be useful to assess the particle bed elevation, and to identify the governing parameters.

論文

Numerical simulation of solid-particle sedimentation behavior using a multi-fluid model coupled with DEM

河田 凌*; 大原 陽平*; Sheikh, Md. A. R.*; Liu, X.*; 松元 達也*; 守田 幸路*; Guo, L.*; 神山 健司; 鈴木 徹

Proceedings of 17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-17) (USB Flash Drive), 14 Pages, 2017/09

Numerical simulations of various thermal-hydraulic phenomena with multiphase and multicomponent flows in postulated core disruptive accidents (CDAs) are regarded as particular difficulties in the safety analysis of liquid-metal cooled reactors. In a material relocation phase of CDAs, core debris may settle on the core-support structure and/or in the lower inlet plenum of the reactor vessel and then form the debris bed. In particular, the shape of debris bed is crucial for the relocation of molten core and heat-removal capability of the debris bed as well as re-criticality. In the present study, a hybrid numerical simulation method, which couples the multi-fluid model of the 3D fast reactor safety analysis code SIMMER-IV with the discrete element method (DEM), was applied to analyze sedimentation and bed formation behaviors of core debris. In the present study, 3D simulations were performed for a series of particle sedimentation experiments with gravity driven discharge of solid particles into a quiescent cylindrical water pool. The present simulation predicts the sedimentation behavior of mixed particles with different density or particle size as well as homogeneous particles. The simulation results on bed shapes and particle distribution in the bed agree well with the experimental ones. They demonstrate the fundamental applicability of the present hybrid method to solid-particle sedimentation and bed formation simulations.

論文

Second-order structural transition in (Ca$$_{0.5}$$Sr$$_{0.5}$$)$$_3$$Rh$$_4$$Sn$$_{13}$$

Cheung, Y. W.*; Hu, Y. J.*; Goh, S. K.*; 金子 耕士; 筒井 智嗣; Logg, P. W.*; Grosche, F. M.*; 金川 響*; 谷奥 泰明*; 今井 正樹*; et al.

Journal of Physics; Conference Series, 807(3), p.032002_1 - 032002_4, 2017/04

BB2016-0329.pdf:0.86MB

 被引用回数:5 パーセンタイル:83.59(Physics, Condensed Matter)

(Ca$$_{0.5}$$Sr$$_{0.5}$$)$$_3$$Rh$$_4$$Sn$$_{13}$$ is a member of the substitution series (Ca$$_{x}$$Sr$$_{1-x}$$)$$_3$$Rh$$_4$$Sn$$_{13}$$ which has recently been argued to feature a structural quantum critical point at $$x_c$$ = 0.9. In the stoichiometric compound Sr$$_{3}$$Rh$$_{4}$$Sn$$_{13}$$, the structural transition at $$T^*$$ $$approx$$ 138 K has been shown to be a second-order phase transition. Moving towards xc, we examine the character of the structural transition in (Ca$$_{0.5}$$Sr$$_{0.5}$$)$$_3$$Rh$$_4$$Sn$$_{13}$$ (i.e. $$x$$ = 0.5, $$T^*$$ $$approx$$ 55 K) using electrical resistivity, heat capacity and X-ray scattering. The absence of the thermal hysteresis in specific heat around $$T^*$$, and the continuous evolution of the superlattice reflection detected by X-ray diffraction are consistent with the scenario that the structural transition associated with a modulation vector $$q$$ = (0.5, 0.5, 0) in (Ca$$_{0.5}$$Sr$$_{0.5}$$)$$_3$$Rh$$_4$$Sn$$_{13}$$ remains second-order on approaching the quantum critical point.

論文

Experimental database for bed formation behaviors of solid particles

Sheikh, M. A. R.*; Son, E.*; 神山 基紀*; 森岡 徹*; 松元 達也*; 守田 幸路*; 松場 賢一; 神山 健司; 鈴木 徹

Proceedings of 10th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-10) (USB Flash Drive), 10 Pages, 2016/11

ナトリウム冷却高速炉の炉心損傷事故における再配置過程では、微粒化デブリによる堆積ベッド形成挙動がデブリベッド冷却による炉容器内事故終息の観点で重要である。本研究では、粒子堆積ベッド形成挙動に関する実験データベースを構築するため、微粒化デブリを模擬した固体粒子を円筒型の水プール中へ重力落下によって放出させ、粒子堆積ベッドの形状及び高さを測定する実験を行った。本実験では、材質及びサイズの異なる3種類(アルミナ,ジルコニア,スティール)の球形・非球形粒子を用い、これらのパラメータが粒子ベッドの堆積形状に及ぼす影響を調べるとともに、その結果に基づき粒子ベッドの堆積高さを予測する整理式を実験データベースとして開発した。開発した整理式は、本実験で把握された重要パラメータに対する堆積ベッド高さの変化傾向をよく再現しており、広範な適用性を有していることが示された。

論文

New reactor cavity cooling system (RCCS) with passive safety features; A Comparative methodology between a real RCCS and a scaled-down heat-removal test facility

高松 邦吉; 松元 達也*; 守田 幸路*

Annals of Nuclear Energy, 96, p.137 - 147, 2016/10

 被引用回数:5 パーセンタイル:43.41(Nuclear Science & Technology)

東京電力の福島第一原子力発電所事故(以下、福島事故)後、深層防護の観点から炉心損傷の防止対策が重要になった。そこで、動的機器および非常用電源等を必要とせず、福島事故のようにヒートシンクを喪失することのない、受動的安全性を持つ原子炉圧力容器の冷却設備を提案する。本冷却設備は安定して冷却できるため、定格運転時の一部の放出熱、および炉停止後の一部の崩壊熱を、常に安定的に受動的に除去できる。特に事故時において、本冷却設備が持つ冷却能力の範囲まで崩壊熱が減少した際、それ以降は非常用電源等が必要なくなり、長期間(無限時間)に渡って受動的な除熱が可能となる。一方、本冷却設備の優れた除熱性能を示すために、等倍縮小した除熱試験装置を製作し、ふく射および自然対流に関する実験条件をグラスホフ数を用いて決定することもできた。

論文

Experimental investigation on characteristics of mixed particle debris in sedimentation and bed formation behavior

Sheikh, M. A. R.*; Son, E.*; 神山 基紀*; 森岡 徹*; 松元 達也*; 守田 幸路*; 松場 賢一; 神山 健司; 鈴木 徹

Proceedings of 11th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety (NUTHOS-11) (USB Flash Drive), 12 Pages, 2016/10

高速炉の炉心損傷事故時に形成される燃料デブリの落下・堆積挙動を明らかにするため、燃料デブリを模擬した特性の異なる固体粒子(アルミナ、スティール)の混合粒子を水プール中へ落下・堆積させる粒子ベッド形成実験を行い、堆積デブリベッドの形状に対する主要パラメータの影響を検討した。本研究により、燃料デブリの落下・堆積に関する数値モデル及びシミュレーションコードの検証に有効な実験データ及び知見が得られた。

134 件中 1件目~20件目を表示