Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tanigawa, Masafumi; Nakamura, Daishi; Asakawa, Naoya*; Seya, Kazuhito*; Omori, Fumio*; Koiso, Katsuya*; Horigome, Kazushi; Shimizu, Yasuyuki
JAEA-Technology 2024-001, 37 Pages, 2024/05
JAEA-Technology-2024-001.pdf:2.32MB
At plutonium conversion development facility, the neutralization sedimentation and the coagulation sedimentation (sludge) items are stored in a polyethylene container packed in the plastic bag. The neutralization sedimentation items and the coagulation sedimentation items are stored in the globe box and storage room in the facility, respectively. Some sludge items generate gases, that swelled the plastic bag. We should ensure whether the bag swelling by visual confirmation. When the swelling is confirmed, those containers are transferred to the glove box to exchange the plastic bag for new one. By keeping the above procedure, those items were stored safely in the facility since its founding. The stabilization work for enhance the safe storage was planned to reduce the gas generation of the sludge items caused by the radiolysis of water. Those sludge items have the containing a sodium nitrate that has moisture-absorption characteristic. Therefore, the stabilization method aimed to remove the sodium nitrate from the items. The work was conducted from August 2018 to August 2022. The sodium concentration in items were reduced to 3 wt% or lower. Each stabilized sludge item packed in plastic bag were confirmed its swelling for over one year in the storage place. No gas generation from all item has been observed for more than the one year. And while both the neutralization and the coagulation sedimentation items were stored they were not the increasing of the moisture in the items. As a result, those items were evaluated that will not generate gases any more and confirmed to be stabilized after this treatment. Then, those neutralization sedimentation items were stored in powder cans and transferred to powder storage room as a retained waste. Based on the above results, risks of the gas generation from sludge items were decreased enough. Therefore, the safety of the stored sludge item was improved and confirmed.
Yoshimura, Nobuyuki*; Toyama, Takeshi*; Shobuda, Yoshihiro; Nakamura, Takeshi*; Omi, Kazuhito*; Kobayashi, Aine*; Okada, Masashi*; Sato, Yoichi*; Nakaya, Tsuyoshi*
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.260 - 264, 2023/11
The J-PARC main ring (MR) will be increased to 1.3 MW. To cope with the increase in beam intensity, the intra-bunch feedback system (IBFB) needs to be upgraded to handle higher frequencies up to about 200 MHz. To evaluate the performance and understand the optimal parameters after this upgrade, we are developing a particle tracking simulation that includes the necessary components. The recoherence period induced by chromaticity between tracking simulations and experiments are compared and it cannot be discribed by the simple simulations, and we investigate what mechanisms explain this result. The shift of synchrotron tune caused by longitudinal wakes using tracking simulations are calculated and it find that introducing the effect of longitudinal wakes only does not explain the recoherence period in the experimental results.
Am neutron capture and total cross sections with ANNRI at J-PARCKimura, Atsushi; Nakamura, Shoji; Terada, Kazushi*; Nakao, Taro*; Mizuyama, Kazuhito*; Iwamoto, Nobuyuki; Iwamoto, Osamu; Harada, Hideo; Katabuchi, Tatsuya*; Igashira, Masayuki*; et al.
Journal of Nuclear Science and Technology, 56(6), p.479 - 492, 2019/06
Times Cited Count：15 Percentile：85.31(Nuclear Science & Technology)
Am with ANNRI at J-PARCTerada, Kazushi*; Kimura, Atsushi; Nakao, Taro*; Nakamura, Shoji; Mizuyama, Kazuhito*; Iwamoto, Nobuyuki; Iwamoto, Osamu; Harada, Hideo; Katabuchi, Tatsuya*; Igashira, Masayuki*; et al.
Journal of Nuclear Science and Technology, 55(10), p.1198 - 1211, 2018/10
Times Cited Count：18 Percentile：87.53(Nuclear Science & Technology)Harada, Hideo; Iwamoto, Osamu; Iwamoto, Nobuyuki; Kimura, Atsushi; Terada, Kazushi; Nakao, Taro; Nakamura, Shoji; Mizuyama, Kazuhito; Igashira, Masayuki*; Katabuchi, Tatsuya*; et al.
EPJ Web of Conferences, 146, p.11001_1 - 11001_6, 2017/09
Times Cited Count：2 Percentile：77.79(Nuclear Science & Technology)Watanabe, Kazuhito; Nakamura, Makoto; Tobita, Kenji; Someya, Yoji; Tanigawa, Hisashi; Uto, Hiroyasu; Sakamoto, Yoshiteru; Araki, Takao*; Asano, Shiro*; Asano, Kazuhito*
Proceedings of 26th IEEE Symposium on Fusion Engineering (SOFE 2015), 6 Pages, 2016/06
Safety studies of a water-cooled fusion DEMO reactor have been performed. In the event of the blanket cooling pipe break outside the vacuum vessel, i.e. ex-vacuum vessel loss of coolant accident (ex-VV LOCA), the pressurized steam and air may lead to damage reactor building walls which have confinement function, and to release the radioactive materials to the environment. In response to this accident, we proposed three cases of confinement strategies. In each case, the pressure and thermal loads to the confinement boundaries and total mass of tritium released to outside the boundaries were analyzed by accident analysis code MELCOR modified for fusion reactor. These analyses developed design parameters to maintain the integrity of the confinement boundaries.
Takeuchi, Masayuki; Yano, Kimihiko; Shibata, Atsuhiro; Sambommatsu, Yuji*; Nakamura, Kazuhito*; Chikazawa, Takahiro*; Hirasawa, Izumi*
Journal of Nuclear Science and Technology, 53(4), p.521 - 528, 2016/04
Times Cited Count：2 Percentile：19.46(Nuclear Science & Technology)Harada, Hideo; Iwamoto, Osamu; Iwamoto, Nobuyuki; Kimura, Atsushi; Terada, Kazushi; Nakao, Taro; Nakamura, Shoji; Mizuyama, Kazuhito; Igashira, Masayuki*; Katabuchi, Tatsuya*; et al.
EPJ Web of Conferences, 93, p.06001_1 - 06001_5, 2015/05
Times Cited Count：4 Percentile：84.98(Physics, Multidisciplinary)Improvement of accuracy of neutron nuclear data for minor actinides (MAs) and long-lived fission products (LLFPs) is required for developing innovative nuclear system transmuting these nuclei. In order to meet the requirement, the project entitled as "Research and development for Accuracy Improvement of neutron nuclear data on Minor ACtinides (AIMAC)" has been started as one of the "Innovative Nuclear Research and Development Program" at October 2013. The AIMAC project team is composed of researchers in four different fields: differential nuclear data measurement, integral nuclear data measurement, nuclear chemistry, and nuclear data evaluation. By integrating all of the forefront knowledge and techniques in these fields, the team aims at improving the accuracy of the data. The background, overall plan, and recent progress of the AIMAC project will be reviewed.
Nakamura, Makoto; Tobita, Kenji; Gulden, W.*; Watanabe, Kazuhito*; Someya, Yoji; Tanigawa, Hisashi; Sakamoto, Yoshiteru; Araki, Takao*; Matsumiya, Hisato*; Ishii, Kyoko*; et al.
Fusion Engineering and Design, 89(9-10), p.2028 - 2032, 2014/10
Times Cited Count：13 Percentile：69.72(Nuclear Science & Technology)After the Fukushima Dai-ichi nuclear accident, a social need for assuring safety of fusion energy has grown gradually in the Japanese (JA) fusion research community. DEMO safety research has been launched as a part of BA DEMO Design Activities (BA-DDA). This paper reports progress in the fusion DEMO safety research conducted under BA-DDA. Safety requirements and evaluation guidelines have been, first of all, established based on those established in the Japanese ITER site invitation activities. The amounts of radioactive source terms and energies that can mobilize such source terms have been assessed for a reference DEMO, in which the blanket technology is based on the Japanese fusion technology R&D programme. Reference event sequences expected in DEMO have been analyzed based on the master logic diagram and functional FMEA techniques. Accident initiators of particular importance in DEMO have been selected based on the event sequence analysis.
Nakamura, Makoto; Tobita, Kenji; Someya, Yoji; Tanigawa, Hisashi; Gulden, W.*; Sakamoto, Yoshiteru; Araki, Takao*; Watanabe, Kazuhito*; Matsumiya, Hisato*; Ishii, Kyoko*; et al.
Plasma and Fusion Research (Internet), 9, p.1405139_1 - 1405139_11, 2014/10
Key aspects of the safety study of a water-cooled fusion DEMO reactor is reported. Safety requirements, dose target, DEMO plant model and confinement strategy of the safety study are briefly introduced. The internal hazard of a water-cooled DEMO, i.e. radioactive inventories, stored energies that can mobilize these inventories and accident initiators and scenarios, are evaluated. It is pointed out that the enthalpy in the first wall/blanket cooling loops, the decay heat and the energy potentially released by the Be-steam chemical reaction are of special concern for the water-cooled DEMO. An ex-vessel loss-of-coolant of the first wall/blanket cooling loop is also quantitatively analyzed. The integrity of the building against the ex-VV LOCA is discussed.
Washiya, Tadahiro; Tayama, Toshimitsu; Nakamura, Kazuhito*; Yano, Kimihiko; Shibata, Atsuhiro; Nomura, Kazunori; Chikazawa, Takahiro*; Nagata, Masanobu*; Kikuchi, Toshiaki*
Journal of Power and Energy Systems (Internet), 4(1), p.191 - 201, 2010/02
Japan Atomic Energy Agency (JAEA) and Mitsubishi Materials Corporation (MMC) are developing the crystallization process for elemental technology of FBR fuel reprocessing. The uranium (U) crystallization process is a key technology for New Extraction System for TRU Recovery (NEXT) process that was evaluated as the most promising process for future FBR reprocessing. We had developed an innovative crystallizer and fabricated an engineering-scale crystallizer and have carried out continuous operation test to investigate the stability of the equipment at steady and non-steady state conditions by using depleted uranium. As for simulating typical failure events in the crystallizer, crystal accumulation and crystal blockage were occurred intentionally, and monitoring method and resume procedure were tried and selected in this work.
Shibata, Atsuhiro; Yano, Kimihiko; Kamiya, Masayoshi; Nakamura, Kazuhito; Washiya, Tadahiro; Chikazawa, Takahiro*; Kikuchi, Toshiaki*
Nihon Genshiryoku Gakkai Wabun Rombunshi, 8(3), p.245 - 253, 2009/09
Behavior of Cs in U crystallization process of advanced aqueous reprocessing system was investigated with simulated dissolver solution. Beaker-scale U crystallization experiments were carried out with some simulated dissolver solutions. The results show that possibility of generation of CsNO
,Cs
UO (NO)
or Cs-FP complex salt is small. Precipitation experiments of Cs-U(IV) complex salts were also carried out with nitrate solution of U(IV) and Cs. It was found that Cs-U(IV) complex salt was precipitated in higher acidity than 5 mol/dm
. It is suggested that Cs-Pu(IV) precipitates can be generated in the U crystallization process, under specific solution condition.
Yano, Kimihiko; Nakahara, Masaumi; Nakamura, Masahiro; Shibata, Atsuhiro; Nomura, Kazunori; Nakamura, Kazuhito*; Tayama, Toshimitsu; Washiya, Tadahiro; Chikazawa, Takahiro*; Kikuchi, Toshiaki*; et al.
Proceedings of International Conference on Advanced Nuclear Fuel Cycle; Sustainable Options & Industrial Perspectives (Global 2009) (CD-ROM), p.143 - 150, 2009/09
Shibata, Atsuhiro; Kaji, Naoya; Nakahara, Masaumi; Yano, Kimihiko; Tayama, Toshimitsu; Nakamura, Kazuhito; Washiya, Tadahiro; Myochin, Munetaka; Chikazawa, Takahiro*; Kikuchi, Toshiaki*
Proceedings of International Conference on Advanced Nuclear Fuel Cycle; Sustainable Options & Industrial Perspectives (Global 2009) (CD-ROM), p.151 - 157, 2009/09
As a part of FaCT project, Japan Atomic Energy Agency has been developing a U crystallization process for advanced aqueous reprocessing technology in collaboration with Mitsubishi Materials Corporation. We have carried out experimental studies and obtained fundamental data. Continuous operation tests were also carried out by an engineering-scale crystallizer to confirm productivity of the equipment and to investigate non-steady state conditions. The requirements for the U crystallization process in the FaCT project could be achieved except DF of Cs. More detail investigation is under way to settle the process condition without Pu-Cs double salt formation.
Shibata, Atsuhiro; Oyama, Koichi; Yano, Kimihiko; Nomura, Kazunori; Koyama, Tomozo; Nakamura, Kazuhito; Kikuchi, Toshiaki*; Homma, Shunji*
Journal of Nuclear Science and Technology, 46(2), p.204 - 209, 2009/02
Times Cited Count：7 Percentile：45.00(Nuclear Science & Technology)A new reprocessing system with 2-stage crystallization process has been developed. In the first stage of the system, U and Pu are recovered from dissolver solution by U-Pu co-crystallization. Laboratory scale experiments were carried out with U and Pu mixed solution and irradiated fuel dissolver solution to obtain fundamental data on U-Pu co-crystallization process. Pu co-crystallized with U, but crystallization yields of Pu were lower than those of U. FPs were separated from U and Pu by co-crystallization, and decontamination factors of Cs and Eu to U in crystal were over 100.
Shibata, Atsuhiro; Tayama, Toshimitsu; Nakamura, Kazuhito; Washiya, Tadahiro; Chikazawa, Takahiro*; Kikuchi, Toshiaki*
no journal, ,
Uranium crystallization tests using a rotary kiln type crystallizer were carried out in an engineering scale in NEXT process condition. First, a steady state operation test was performed to confirm a stable crystallizer operation. Next, non-steady state simulation test was performed to understand non-steady state phenomena on the crystallizer and to design the measurement system of crystallizer.
Harada, Hideo; Iwamoto, Osamu; Nakamura, Shoji; Kimura, Atsushi; Iwamoto, Nobuyuki; Terada, Kazushi; Nakao, Taro; Mizuyama, Kazuhito; Igashira, Masayuki*; Katabuchi, Tatsuya*; et al.
no journal, ,
The research project has been started for improving accuracy of neutron nuclear data for minor actinides (MAs) and long-lived fission products (LLFPs), which is required for developing innovative nuclear system transmuting these nuclei. The project consists of 5 items: (1) Accurate measurements of thermal neutron capture cross-sections (2) High-precision quantification of sample amount used for TOF measurement (3) Resonance parameter determination by combining total and capture cross sections (4) Extension of capture cross sections to high energy neutrons (5) High quality evaluation based on iterative communication with experimenters. The overall plan of the project is presented.
Nakamura, Makoto; Tobita, Kenji; Tanigawa, Hisashi; Someya, Yoji; Masui, Akihiro; Watanabe, Kazuhito; Konishi, Satoshi*; Torikai, Yuji*
no journal, ,
Tritium is major radioactive material in a fusion reactor. Evaluation of the dose due to the tritium is essential to understand environmental consequences of incidental or accidental conditions postulated in the fusion reactor. A purpose of this study is to identify issues to apply UFOTRI, a code of tritium dose analysis being used for the ITER safety assessment, the Japanese environmental conditions. Extensive scans of UFOTRI calculation runs were performed in various meteorological and release conditions. The scans show that the contribution of the secondary tritium release is more significant in the cases of lower release height, lesser stable atmosphere or more distant conditions. The analysis, thus, suggests that it is important to take into account the contribution of the secondarily released tritium in evaluating the early dose to the public due to the tritium release.
Harada, Hideo; Iwamoto, Osamu; Iwamoto, Nobuyuki; Kimura, Atsushi; Terada, Kazushi; Nakao, Taro; Nakamura, Shoji; Mizuyama, Kazuhito; Igashira, Masayuki*; Katabuchi, Tatsuya*; et al.
no journal, ,
Improvement of accuracy of neutron nuclear data for minor actinides (MAs) and long-lived fission products (LLFPs) is required for developing innovative nuclear system transmuting these nuclei. In order to meet the requirement, the project entitled as "Research and development for Accuracy Improvement of neutron nuclear data on Minor ACtinides (AIMAC)" has been started as one of the "Innovative Nuclear Research and Development Program" at October 2013. The background, overall plan, and expected achievements of the AIMAC project will be reviewed.
Masui, Akihiro; Nakamura, Makoto; Watanabe, Kazuhito; Someya, Yoji; Tanigawa, Hisashi; Tobita, Kenji
no journal, ,
When a pipe of tokamak cooling system breaks outside of vacuum vessel, it is necessary to keep integrity of buildings to prevent that tritium and ACP contained in coolant are released to environment. A load to buildings is affected by plant design parameters, for example mass of coolant, pipe diameter and volume of buildings. The impacts of these parameters on the load to buildings are shown based on thermal hydraulic analyses.
